Purchase Analysis Report not shown.

Hi,
    Iam using SAP B1-2005B,PL-40.but it do not show Purchase Analysis report(System report) so tell me what are the possible reasons for not showing report.please help me out.
Regards
Sudhir.
Edited by: Philip Eller on Jun 27, 2008 9:49 AM

Suda,
       I had already done Form settings for Purchasing A/P>Purchase Report.still the purchase analysis report not showing in Supplier- A/P Invoice,Purchase order,GRPO of any period and the fact is it shows reports of Purchase Analysis>Items or Sales empolyees.so please help me.
Regards
Sudhir Pawar.

Similar Messages

  • Purchase Analysis Report

    Hi Experts
    When I Run Purchase analysis report in SAP Business One 8.8 under individual vendor view the Open A/P Invoice (not done Payment) sowing 0.00 in the Applied amount and the purchase amount is showing negative value bacuse it is a credit memo - which is correct.
    But when I run the same report in my customer site who are running SAP B1 2005 PL 43, they are not seeing 0.00 in the applied amount instead they are seeing the same negative amount which is displayed in the purchase amount.which is not correct.
    Please assist me
    Thanks and regards,
    Vinodh
    Edited by: Paul Finneran on Oct 15, 2009 12:36 PM

    Hi Vinodh,
    You may check these threads to see if they have anything related to your question:
    Re: Purchase Analysis Report
    Purchase Analysis Report not shown.
    cant see Purchase analysis report of standard SAP B1
    Thanks,
    Gordon

  • Strange figures in Purchase Analysis report

    Hello,
    I am running a purchase analysis report and am a little confused by the results. I am running the reports using goods receipts. What I am finding is that there are a vast amount of zero quantity items shown in the results. When I drill down into the good receipt I can see that there are quantities there but they are not shown in the results. The quantities that are shown are where the goods receipt is open. Where the quantities are zero the goods receipts are closed.
    Is this normal?
    Regards,
    Juan

    Hi Juan,
    This is system behavior. When you select the report to be run on basis on GRPO, it wud display all the GRPO's but when you see a qty as zero in the report, it means that the target document is created for that GRPO. As suggested by Ms. Julie, you would have to make query report to get desired data.
    Thanks,
    Joseph

  • Sales and Purchase Analysis reports by Item

    The current functionality of these reports is more like an open items list rather than an analysis report.
    If you Run a Purchase Analysis report by Item with a secondary selection of Supplier, and choose GRPO - the scenario is to find out how many of which products you have received in the date range from a specific supplier. This type on data is useful to use for negotiations on pricing etc.
    Currently, the report will only display values for GRPO that have not been drawn to AP Invoice. This is supposedly system functionality, but, the report is called analysis, so should provide data for that purpose?

    Hi,
    You may double click the column header to change the sort.
    Thanks,
    Gordon

  • How can I see Foreign Currency FC balance in Purchase Analysis Report??

    Dear Experts,
    Right now in the Purchase Analysis Report, I can only see Local Currency and System Currency balances. How can I see Foreign Currency balances??
    Much Thanks!
    Warmest Regards,
    Chinho

    Hi!
    I belive its not there in Purchase\Sales Analysis Reports. You need to build a Customized report for that.

  • Zero Quantity in Purchase Analysis Report

    I have create Item AP invoice on today date,  raise AP credit note for that full AP invoice on today date. Then run  purchase analysis report. (Quantity column will show zero) How can I get rid of these zero quantities.

    hi,
    Check in the Inventory tab of item master data for those items.  What is the value for in stock and available.
    If you have done a/p credit memo for those items then by default the system will show zero quantity as the system considers it as the items which are returned
    Hope its helpful
      Regards
    Darshan Desai

  • SBO 2005 A PL 31 Annual Purchase analysis report missing result

    My client runs on SBO2005A ( 6.80.319) SP 01 PL31. When running standard Annual Purchase Analysis report, all data is missing, any ideas which patch could resolve this. Can successfully run Annual Sales Analysis report

    Hi,
    Welcome you post on the forum.
    2005 version had out of support for such a long time. They need to upgrade to new version to fight the problem. Even 2007 version will be out of main stream support soon. Better ask them to 8.8 directly.
    Thanks,
    Gordon

  • Cant see Purchase analysis report of standard SAP B1

    Hi friends,
    I am using SAP B1 2005 B , PL 36 facing Prob. that-
    ->though i make AP invoices , but cant able to see its report in Purchase analysis
    , it does not show any data .just empty report comes without data.
    But if i see Sales Sales Analysis report it shows perfect data in report.
    pls. guide me.
    regards,
    mahesh

    Hi Mahesh
    Sridharan is not entirely right, the purchase analysis will include all valid A/P Invoices, even if they are paid. The only ones excluded are canceled documents, and since an A/P Invoice cannot be canceled, it is not a problem. If it is credited by a credit note in full, then it will not be displayed as the nett effect is zero. The purchase analysis will look at A/P Invoice less A/P Credit Notes, or GRPO less Returns, depending on what you select.
    My suggestion is that you check all the options like from date and to date are correctly specified. Make sure you don't have properties selected that are not in use, etc.
    If you still can't get data, please give us the exact options you are selecting so we can test and help you resolve. We need to know if it is Annual/Quarterly/Monthly, AP Invoices/Purchase Order/GRPO, Individual/Group, Posting Date/Due Date/Document Date, etc.
    Kind regards
    Peter Juby

  • SAP standard sales report not shown data

    We have following standard reports for sales. We have authorisation for these reports. But when we execute these report for 3P00 sales org., these reports will not shown any data saying that no data exist.
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis- Invoiced Sales - MC+Q
    Sales office Analysis- Invoiced Sales - MC-E
    Shipping point Analysis - MC(U
    Request you to kindly provide the solution.

    Hi,
    Have u configured Logistic information system proper - mean to say r u maintained same settings for this sales organization
    IMG >>> Logistic genral >>> LIS >>> Logistics data warehouse >>> Updating.
    R u maintained statastical group in material & customer master, check that.
    Kapil

  • Sale/Purchase Analysis Report

    Hi All,
    I want to create purchase analysis and sale analysis in crystal report.
    Does anyone have a standard format for these?  If yes, please help me out?

    Hi Sadhan,
    wht kind of report u need ?
    i have sme format regarding this :-
    SELECT T0.[DocNum], T0.[DocDate], T0.NumAtCard As 'Bill No.', T0.[CardName], T1.[Dscription], T1.[Quantity], T1.Price As 'Rate', T1.[LineTotal] As 'Value', T0.[DocTotal] As 'Total Value', (ISNULL((SELECT SUM(T2.QUANTITY) FROM rpc1 T2 WHERE T2.DocEntry=T0.DocEntry),0)) RetQTY, (ISNULL((SELECT SUM(T2.LineTotal) FROM RPC1 T2 WHERE T2.DocEntry=T0.DocEntry),0)) RetValue, (isnull((SELECT SUM((case when upper(t4.STACode) like 'BED%' then T4.TaxSum else 0 end))
          FROM PCH4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) ExciseDuty,
         (isnull((SELECT SUM((case when upper(t4.STACode) like 'eCess%' then T4.TaxSum else 0 end))
          FROM PCH4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) ECess,
         (isnull((SELECT SUM((case when upper(t4.STACode) like 'hes%' then T4.TaxSum else 0 end))
          FROM PCH4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) HEdCess, (isnull((SELECT SUM((case when upper(t4.STACode) like 'VAT%' and t4.TaxRate=12.5 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) As 'VAT12.5',
    (isnull((SELECT SUM((case when upper(t4.STACode) like 'VAT%' and t4.TaxRate=4 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0))VAT4, (isnull((SELECT SUM((case when upper(t4.STACode) like 'VAT%' and t4.TaxRate=2 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0))VAT2, (isnull((SELECT SUM((case when upper(t4.STACode) like 'CST%' and t4.TaxRate=2 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) As 'CST2',
    (isnull((SELECT SUM((case when upper(t4.STACode) like 'CST%' and t4.TaxRate=4 then T4.TaxSum else 0 end))
    FROM pch4 T4 WHERE T4.DocEntry=T0.DocEntry ),0)) As 'CST4', T2.TransCat As 'Form No.'  FROM OPCH T0  INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH12 T2 ON T0.DocEntry = T2.DocEntry WHERE (T0.[DocDate]>='[%0]' and T0.[DocDate]<='[%1]')
    may this help u if yes then send ur mail id i will send u sme more !!!!
    Thanks,
    JRAJPUT

  • Crystal report not shown after application idle time

    i have a web page which uses around 10 session variables to store values on a button click.and after assign session values Response.Redirect("~/url",false); to a a page which contains crystal report viewer.and report should show those session values.after keeping the application idle for 45 mins i click on the button which assign session values.then it's redirecting to the report page but the report is not shown.it shows a empty page and no errors shown(only happens application is idle for nearly 45 mins other wise works fine)
    i'm using iis 7
    in the web.config i have set sessionState timeout="60" and application pool idle time out to 60 mins.
    any idea why this happens

    Make sure you are on SP 8
    Make sure you are using .Close and .Dispose on your report objects as you get done with them.
    What OS? (2003, 2008, 2012)
    Provide more info on the following:
    The problem is that the Crystal Report Viewer does not load after a few hours.
    What does that mean? Errors? Warnings? Behavior? Symptoms?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Discovery System HUJ - Created Purchase Order is not shown...

    Hello,
    after log on to HUJ, I started the process procurment -> Approve Purchase Requisition and Create Purchase Order. I could read the material and create the Purchase Requisition, but after that, it is not shown. After 60s I get an time out instead...-
    How can that be healed?
    Peter

    customizing problem.
    or
    field mapping not correct.

  • VA01 BDC Session - Purchase requisition wiew not shown

    Hello Forum,
    I've a problem with a BDC session in ECC 6.0 about VA01. When I try to change the purchasing requisition data from the shcedule tab using the button identified from the BDC with the code "EIBB"  (the last one) the subsequent screen is not shown from the system. If I try to create manually a new sales order I'm able to view the screen.
    I tried to remake the recording in 4.6C and the screen is shown correctly.
    I'm in a mock conversion and in UAT but I wasn't able to find the problem.
    Can you suggest something << Moderator message - Everyone's problem is important >>?
    Many Thanks.
    Regards.
    Edited by: Rob Burbank on Oct 19, 2010 3:20 PM

    Thanks Anyway, but with an additional search I've found the solution Here.
    Batch input VA01 problem

  • App shown in "Purchase History" but not shown in "Purchase" tab

    I tried syncing my Ipad2 to Ipad3. Only some of my  apps transferred to the new Ipad3.
    I checked Itunes purchase log "Purchase History"  and it DOES show that I purchased the apps, but yet the app is not shown on the ipad3.
    On the ipad3, went into App Store/ Purchased (tab at bottom).
    My puchased app is not there. I only see the Free version.
    I thought to try to see if I tried to purchase again, I would get a message that the item is already purchased.
    It brought me all the way up to the credit card info page, so I stopped as I do not want to purchase again.
    Question is...How do I get my purchased apps back ?
    Purchase History shows it there and paid for, but everytime I try to restart and reconnect and re-sync and turn off then turn on, it does not come back.
    I checked my Itunes apps, and the only app shown is the free version. What happened to the bought version?
    I only have (1) Apple Id account.
    Any help would be GREATLY APPRECIATED.
    Thank you.
    J

    Does it also not show under the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes ?
    You can try contacting iTunes support and see if they can see why it's not there (I'm not aware of any phone support for iTunes) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Role analysis report not displaying data

    Hi experts,
    I'm trying to get data out of all reports from the dashboard and so far all of them work except for the Role Analysis report. When I execute the report all information comes blank and under "Number of Roles Analyzed" shows 0. Is there any way to farther test this report? I see a lot of information on the community but mainly the solutions are "execute job sycn" and check parameter 1025 for default ruleset. Is there any other thing I can do to get results here?
    Note: I also try generating all roles, running an all system risk analysis and just fyi SOD is working for User and Role level.

    Screen is attach, as far as steps go well after running Authorization Synch, Repository Synch and Action Usage Synch from SPRO I went to NWBC ->Reports & Analytics and under Access Dashboards I click on "Role Analysis" and I get the attach screen.  All the other reports under Access Dashboards works (except for "Alerts") but Im guessing thats because I dont have any alerts or something like that.  Any help is always appreciated

Maybe you are looking for

  • My mail app on my ipod touch isnt working

    my mail app isnt working and i dont know what to do, i touched my mail app and i have had it set up for at least 2 or 3 months and when i go to the mail app it says something like this account info cant be found, try going to settings and enter your

  • Ever since I updated to iTunes 11.2.2.3 the Remote app on the iPhone no longer works.

    Sometimes after deleting the library from the iPhone the library pairs with the Remote app but will not open the Windows 8.1 PC's iTunes library. It'll do nothing once added and then state that an error occurred.

  • User Template file in system library

    On a Macbook Air with normal use, how big should this file be?  On mine it is around 7gb and I am constantly being told the startup disc is full.  I am coming to a standstill.  This is the largest file.  What do I do, because I also can't access it?

  • RFC - Web Service

    Hello everyone I created a web service, based on RFC to perform the steps are: In transaction SE37 to create a RFC Create a Web Service I activated the Web Serivice in the transaction SICF when I go to http://xxxxx:xxxx/wsnavigator I put the URL of t

  • Unicode Error - Datatype Curr

    Hi experts. Please can you help me? I used below method instead of move clause. I can transfer (wa_table> to buffer. But i found ##―ఀ###ఀ     ###ఀ contents in Buffer. This filed of buffer is Curr(15.2) datatype. Please Can notice me how can slove thi