Purchase Order can't captured Internal order from Asset Master

Hi experts,
I am creating a PO to purchase asset and so using the category Asset. In the asset master, I have defined the Internal Order (investment order) number.
At the Account Assignment tab, I entered the asset number in the PO and it is supposed to capture the Investment Order number from the asset master to the "Order" field as well. But it was not.
Can any of the expert here advise? Any configuration is required at the PO level?
Thank you so much. will assign point for solutions

Hi
There is no configuration setting in the Procurement/Purchase for defaulting the
order number.
As I know there is no setting to setting available in controlling also
for calling the urder number thru asset in a PO.
Order number comes from the default assignment to
Cost element,Cost center and Order in OKB9 transaction.
Please contact the controlling before coming to a conclusion.
Regards
Rammohan.

Similar Messages

  • Internal Order is not reading from Asset master through derivation Rule

    Hi,
    I entered Functional Module to read Asset Master data in derivation Rule. While procuring an Asset after selecting an asset the fund center, fund are coming automatically but Internal Order and Cost center is not picking automatically.
    It has to pick Internal Order automatically from Asset master data.
    Please guide me.
    Regards,
    Sree

    Hi,
    Internal order should come from the asset master data, with no connection to derivation strategy in FM. Regarding the cost centre, it's irrelevant when you purchase to an asset.
    Regards,
    Eli

  • Can we do Internal order budget at period level

    Hi
    Can we do Internal Order Budget at Period level ?
    if yes, please let me know how can we do budget at period level.
    Appreciate your help.
    Regards,
    Kishore
    Moderator: Please, search SDN

    Dear,
    Re: Budget with availability check
    Regards,
    Chintan Joshi

  • Sales order value flow to internal order without cost elements.

    Dear Sap Friends,
    My client have a requirement, when sales people creating a sales order, sales value flow into internal order without a cost elements. normal case when SO, Deleivery, and billing data automatically can flow into CO-PA. Here i want to know how value can flow into I.O. without a cost elements please give me advise.
    i created a  statistical internal order  and that internal order i assigned in sales order account assingment. but i know that there is no value going to flow this  I.O. becasue there is no cost elements.(becasue client dont want to create a cost element for internal order)
    There is any option when i crate a sales order  values can go into internal order without cost elements or i can create a statistical Internal Order and assigned into  CO-PA? if i can dothatt what is the steps. kindly explain to me. if some have can explain to me please leave contacts number or send me reply.
    Regards
    Paul

    By standard configuration itr is not possible.
    You ought to have user exit in place.
    For DC A & B, where you need a redetermination of pricing component, take help of an ABAPer for user exit USEREXIT_XKOMV_FUELLEN (module pool SAPLV61A, program RV61AFZB).
    So now, for DC C, you need to change the copying control in VTFL - item, where your pricing type ought to be D-Copy pricing elements unchanged.
    Regards
    JP
    ASSUMPTION: I assume that your all DC uses the same Sales Doc type & Billing Doc type

  • Can not ping internal network from ASA

    I can not ping internal computer from ASA. Comp IP address 192.168.187.15, gateway is 192.168.187.14 which is ASA internal interface. I've got an IP Phone connected to the same ASA with Ip address 192.168.185.15 and internal ASA interface 192.168.185.14 and everything works fine. We are doing testing, do not be surprised of configuration.
    ASA Version 8.2(1)
    hostname ciscoasa
    enable password 8Ry2YjIyt7RRXU24 encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    dns-guard
    interface GigabitEthernet0/0
    nameif ouside3
    security-level 0
    ip address 10.254.17.25 255.255.255.248
    interface GigabitEthernet0/1
    nameif outside
    security-level 0
    ip address 10.254.17.9 255.255.255.248
    interface GigabitEthernet0/2
    nameif Lan
    security-level 100
    ip address 192.168.185.14 255.255.255.0
    interface GigabitEthernet0/3
    nameif comp
    security-level 50
    ip address 192.168.187.14 255.255.255.0
    interface Management0/0
    nameif management
    security-level 100
    no ip address
    management-only
    boot system disk0:/asa821-k8.bin
    ftp mode passive
    access-list 110 extended permit ip any any
    access-list nat extended permit ip any any
    access-list allow_ping extended permit icmp any any echo-reply
    access-list allow_ping extended permit icmp any any source-quench
    access-list allow_ping extended permit icmp any any unreachable
    access-list allow_ping extended permit icmp any any time-exceeded
    access-list allow_ping extended permit udp any any eq isakmp
    access-list allow_ping extended permit esp any any
    access-list allow_ping extended permit ah any any
    access-list allow_ping extended permit gre any any
    access-list nonat extended permit ip any any
    access-list nat2 extended permit ip any any
    access-list nonat2 extended permit ip any any
    pager lines 24
    logging asdm informational
    mtu ouside3 1500
    mtu outside 1500
    mtu Lan 1500
    mtu comp 1500
    mtu management 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (Lan) 0 access-list nonat
    nat (Lan) 1 access-list nat
    nat (comp) 0 access-list nonat
    nat (comp) 1 access-list nat
    access-group allow_ping in interface outside
    router eigrp 2008
    neighbor 10.254.17.10 interface outside
    network 10.254.17.8 255.255.255.248
    network 192.168.185.0 255.255.255.0
    network 192.168.187.0 255.255.255.0
    route outside 0.0.0.0 0.0.0.0 10.254.17.10 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 192.168.1.0 255.255.255.0 management
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set myset esp-3des esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto map mymap 10 match address 110
    crypto map mymap 10 set peer 10.254.17.10
    crypto map mymap 10 set transform-set myset
    crypto map mymap interface outside
    crypto map mymap2 20 match address 110
    crypto map mymap2 20 set peer 10.254.17.18
    crypto map mymap2 20 set transform-set myset
    crypto map mymap2 interface comp
    crypto map mymap3 30 match address 110
    crypto map mymap3 30 set peer 10.254.17.26
    crypto map mymap3 30 set transform-set myset
    crypto map mymap3 interface ouside3
    crypto isakmp identity address
    crypto isakmp enable ouside3
    crypto isakmp enable outside
    crypto isakmp enable comp
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash md5
    group 2
    lifetime 28800
    no crypto isakmp nat-traversal
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    priority-queue outside
    threat-detection basic-threat

    This is what I get, looks like ASA does not reply. Why?
    ciscoasa# sh capture cpi
    5 packets captured
    1: 05:20:14.494908 192.168.187.15 > 192.168.187.14: icmp: echo request
    2: 05:20:19.526935 192.168.187.15 > 192.168.187.14: icmp: echo request
    3: 05:20:25.026320 192.168.187.15 > 192.168.187.14: icmp: echo request
    4: 05:20:30.525699 192.168.187.15 > 192.168.187.14: icmp: echo request
    5: 05:20:36.025084 192.168.187.15 > 192.168.187.14: icmp: echo request

  • Can I capture the video from the TV card or video capture card to publish

    Can I capture the video from the TV card or video capture card to publish?
    I tried to use the USB camera, it's OK. But, will the TV card or video capture card also work?

    Hi,
    iChat will set up a Video chat window that takes in to account your Processor speed and Internet Speed and to some extent the Buddy's speed.
    This then denotes the pixel content of each frame.
    OS X 10.6.x tells me this is iChat 5 which in turn mean you have  at least an Intel Core 2 Duo Processor.
    This should be capable of 30 frames a sec at  about 640 X 480 pixels  (Check the Connection Doctor (Video Menu) and the Statistics tab during a Chat).
    iChat 5 cannot do HD  (Max of 4:3 ratio at the above figures)
    After that it depends how you are recording the chat.
    Quicktime X would do it.
    iChat will do it itself (if the Buddy agrees)
    10:14 PM      Wednesday; February 1, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Production order settlement to statistical internal order

    If you would like to settle a production order to a statistical internal order, could you at the same time settle to COPA ?

    Hi,
    principally its possible to add a real settlement receiver and a statistical settlement receiver. If you have entered the real acount assignment (CO-PA = PSG) in the settlement rule mark the line, tick the "detail" button (F2) and enter the statistical account assignment.
    The settlement receivers (PSG and ORD) must be allowed in the settlement profile and in the allocation structure there must be a settlement cost element assigned to receiver type "PSG and ORD" (or it is settled cost element wise).
    Please try!
    Best regards, Christian

  • If I purchase FCPX can I retrieve my work from the trial version?

    If I purchase FCPX, can I retrieve my work from the trial version?

    Thanks for the response!  Let me be more specific.  So...even though the trial has expired, I can still retrieve my project once I purchase FCPX?  Thanks in advance!

  • Can you capture images directly from a fuji camera - Fine Pix S2pro

    can you capture images directly from a fuji camera -- Fine Pix S2pro or Fine Pix S2pro to a imac running 10.6.5
    camera tethered to the imac

    Page 76. Thanks!!!
    You can quickly open Camera when the screen is locked by double-clicking the Home button, then tapping          .

  • How can I capture video clips from you tube or my own DVD's

    How can I capture video clips from my own DVD's or You Tube type of media, I am trying to create a presentation using Key Note 

    As long as you are using the clips with copyright permission (the organisation I work for has this for some distributers) try Wondershare (I am sure other converters are available). You can install an extension for Safari (I use FastestTube 2.2.9.3) to download from YouTube. However, please be aware that you could be breaking copyright laws when so doing.

  • Option of creating a DIR from Asset master not available

    hi
    I have one document type for which object link is Asset master ( ANLA, Screen no: 225).
    In customizing for create document, option selected is Use transaction to create document.
    Now When I go to Asset master -> extra -> Document data , there I get option of only attaching the document, not creating the document directly from Asset master.
    Any help on this?
    Thanks and Regards,
    Niraj Sikligar

    Hi Niraj
    As per my understanding you must have used Option  2 in Customizing of Object ANLA in DC10 in Create Document Field.
    There are Three Options for Input 0,1,3
    1. If you select 0 for Document Type DWG , Then when you press Button Create Document You get list of Document Types to which Eg.  Object MARA is linked. In This example we Say DRW, DRM,DCG.
    In this list you will not see DWG.
    2. If you select Option 1 for DWG, Then you will find DWG in the list if you press Button Create Document .
    3. If You Select Option 2 for DWG, Then you will find DWG in the list if you press Button Create Document and when you select DWG, it will take you to Transaction CV01N.
    These Options allow you to create DIR  from an Object with three different Option.Choose any method which suites your clients requirement.
    For all three Options you can link Any Document type in Table Linked Document manually.
    Hope this tip is usefull to you.
    With Regards
    Mangesh Pande

  • Donot want asset sub no. inherit capitalized on from asset master.

    < MODERATOR:  Message locked.  Please post this message in the [Asset Accounting forum|SAP ERP Financials  - Asset Accounting;. >
    i donot want asset sub no. inherit capitalized on from asset master. example asset no 800041-0 capitalized date on 01.01.2000 when i create asset sub number 800041-1 by t-code AS11.
    the system copy value capitalized on and ordinary depreciation start.
    what should i do to avoid sub number inherit value capitalized on and ordinary depreciation from main asset ?
    Edited by: dittaporn nanasilp on Sep 30, 2008 7:27 AM

    Hi
    Goto-spro-Financial Accounting-Asset Accounting-Master Data-Screen Layout-Define Screen Layout for Asset Master Data-Define Screen Layout for Asset Master Data-select layout-click on logical field groups folder-select posting information-dounle click on field groups rules folder-deselct copy field for capitalization date row
    For ordinary depreciation
    Goto TCode AO21
    select layout-click on field group rules folder-select Ord.dep.start date row and deselect copy field
    Cheers
    Srinivas

  • Purchase order with reference to internal order

    Dear all
    I am creating a purchase order with reference to a statistical internal order.The total PO value should not exceed the budgeted amount for that statistical internal order.How should i achieve this?
    Thanks in advance.
    Madhavi

    Hello
    First Create Budget Profile.
    Make Specification In Availability Control as Activation Type ''01- Automatic activation during budget allocation''
    Usage 100 and Tick ''Overall'' check box.
    After that Make Setting for your Controlling area in SPRO Path '' Define Tolerance Limit for Availibility control''

  • How can i finf internal orders,Business area wise?

    Hi experts,
    As you know,we are creating internal order under a business area.
    Now my problem is,when i am trying to view internal orders Business area wise in KO03,its showing me all the internal orders and B.Area is not showing side to that.
    Any other T.CODE available to view internal orders Business Area wise?
    Plz suggest.
    Regards,
    Sumeya Offrin

    Hi
    Use TCOD KOK5 and maintain the variant for Business Area & IO.
    Thanks
    GG

  • How to create a service order and check the internal order in R/3

    Required Solution:
    1. How to copy existing service order and create new one and check the internal order in R/3, whether the certain service order is correctly created in r/3, can you polease explain the steps plz.
    2. If i am creating service order by service template finally the service order is getting created but it is not showing me in the table iaom_crm_aufk, how to check this.
    can any one help me in this issues as soon as possible.

    Hello Zita,
    Try to restart your portal after creating <b>ServiceUser</b> in both UME and KM.
    One more major difference between ServiceUser and normal portal user is that a ServiceUser does not have a UserAccount (IUserAccount)
    Object serviceContext = null;
            try {
                serviceContext = AccessController.doPrivileged(new PrivilegedExceptionAction() {
                    public Object run() throws WcmException {
                        return ResourceFactory.getInstance().getServiceContext(CONTRACT_SERVICE_USER);
            } catch (PrivilegedActionException e) {
                logger.severe(e, "ResourceContext for the technical " + serviceUser +
                     " user could not be retrieved.");
    IResourceContext resCtx = (IResourceContext) serviceContext;
    So I modify all KM resources with this resCtx.
    Hope this helps ...
    Greetings,
    Praveen Gudapati
    p.s. Points are always welcome for helpful answers

Maybe you are looking for