Purchase order idoc issue

Hi,
I am facing a issue with an inbound purchase order change IDOC (message type: PORDCH).
I am getting the following error: FM VENDOR_MASTER_DATA_SELECT_15 ; no partner functions found for vendor VENDOR_MASTER_DATA_SELECT_15 1.
The vendors are configured such that they dont need a partner function. The suprising part is that the same message type idoc from the same vendor got succesfully posted a few days back and a few days after the issue was found, which means the error doesnt occur every time.
Any input is highly appreciated.
Thanks,
Aparna.

Hi Aparna,
I want to make changes in an existing PO through an inbound idoc. I am using idoc type PORDCH01 and message type PORDCH, process code BAPI. But I am getting an error "Characteristic does not exist in operating concern".
Can you please explain how u are using idoc type PORDCH01??
Thanx in advance,
Shaleen

Similar Messages

Purchase Order Idoc Issue - PORDCR103

Hello Experts,
I have one PO and 5 PO Items in my source. I sent Idoc(PORDCR103) to SAP from SAP BODS4 successfully and I was expecting to see 1 PO with 5 items But I saw 5 PO's were created with 5 items each instead of 1 PO with 5 items. Please find attached my Job screenshots.
Any Idea on this.. Please can anybody share your experience.
Thanks...Mohan

This was because of different purchase group's in source data for all other 5 po items. I have resolved this issue by make same purchase group for all 5 po items.

Purchase order save issue, Using through BADI PROCESS_PO_CUST ME21n

Hi,
Pls Experts ,can we have some solution for this
Purchase order save issue, we are Using BADI PROCESS_PO_CUST currently we are throwing a
message using MMPUR_MESSAGE_FORCED if mandatory custom fields are not entered by the User,
When we are saving the PO we are getting a exception which is raised by us ( custom message ) .
Pls let me know is there any way to clear the message or to make mandory custom fields to be entered by user ..
thanks in advance...
PK

Hi Arnab,
Thanks for quick response ..
My requirement is if user is not entering the cusome fields then i dont want to allow him to process any other Tabstrips in the order .. thats the reason i am throwing an error message asking to enter custom fields.. then once user enters the custom fields which are created by me .. then i should consider those values for further process like some other tab strips values maintained by the user then when we try to Save the PO still my custom error will be creating issue its not allowing to save..
Can i have some solution ..
thanks in advance.
kumar

Splitting Purchase Order Idoc based on qty

Hi All,
I am having a requirement wherein i have to insert multiple line items in purchase order idoc based on quatity .Eg if the line item qty is 3 then the same line item has to be repated for 3 times and purchase order idoc has to created with 3 line items.I am trying to do this User exit EXIT_SAPLEINM_002 which is used Customer Enhancements to Data Segments: Purchasing Document (Outbound ).Can anybody tell me how can i go ahead inserting multiple lineitems in purchase order idoc based on the qty.So, Can anybody know how to handle this scenario? Also, can you please let me know whether is there any standard procedure for handling this scenario
Thanks in advance
Regards
Saravana

Hi,
Use t.code ME2M or ME2N , enter account assignment category A & then choose selection parameter WE101 (open goods receipt) and execute.
Regards,
Biju K

Same message code & function for both Sales & Purchase order idoc.

The same message code and function be used to send both sales order and purchase order idoc?

Hello,
You can use the same message code and function to send for both sales orders and purchase orders provided if you use different message types i.e., output types in the outbound partner profile configuration for processing these transactional data.

Purchase order IDOC: output

Hi
I did configure a the following.
1.Outbound message type ORDERS
2.Outbound receiver port : TRfc
3.Basictype ORDERS05
4.Message control: Application EF Message type NEU . Process code ME10
What do i need to configure additionally so that the purchase order idoc get exported?

Naresh
This is what i did already.
When i create the order , i user NEU AS as output and "distribution ALE" as medium. I then select LS (logical system) as Partner function and SAPBC as partner.
I get a warning message "Partner SAPBC does not exist for partner function LS".
When i go back to the messages, it is unprocessed. When i display the communication method, i get the error "No communication data has been defined for transmission medium A"
Any idea why?

Purchase Order IDoc

Hin all,
can any body help me in IDOCs
where can i find the standard Purchase order IDOC
plase help me
thanks

Hi,
for outbound u have the FM( IDOC_OUTPUT_ORDERS)
for inbound u have the FM (IDOC_INPUT_ORDERS).
also in WE30 u can check ORDERS05
Regards,
Nagaraj

Generating purchase order idoc, when a sales order is created

Hi folks,
       we need to send purchase order idoc from SAP to some external system. Once sales order is created, it should automatically generate the purchase order idoc and send to the external system....Any document showing step by step configuration to do so? I have basic knowldege of ALE and IDOC...please suggest me the configuration steps in detail...
           Thanks in advance,
             Shyam.

Hi,
1. Configure the IDoc with message type ORDERS and basic IDoc type as ORDERS05 (You have to follow common step-by-step approach)
2. Configure Message Control to automatically generate IDoc whenever a Sales Order is created. (I mean output type)
So whenever a Sales Order is created, output type will generate an IDoc.
Hope this information is useful.
Regards,
AK

Customer Sales Order number to display in Purchase Order idoc

Hi experts,
I have the Customer Sales Order number in the PO item level under "account assignment" tab.
But it does not show in the idoc xml ouput of the PO.
Could you let me know if it is not standard field to display in the ORDERS05 idoc type of the PO?
If not what print program or form that can be used to show the sales order number.
Also I want to show the Customer PO number into the Purchase Order idoc VBKD-BSTKD and the PO date will be in VBKD-BSTDK.
This is very urgent ! Will reward.
Rgds,
Pri

Hi experts,
I have the Customer Sales Order number in the PO item level under "account assignment" tab.
But it does not show in the idoc xml ouput of the PO.
Could you let me know if it is not standard field to display in the ORDERS05 idoc type of the PO?
If not what print program or form that can be used to show the sales order number.
Also I want to show the Customer PO number into the Purchase Order idoc VBKD-BSTKD and the PO date will be in VBKD-BSTDK.
This is very urgent ! Will reward.
Rgds,
Pri

PORDCH01-change purchase order Idoc

Hi all,
I require some suggestion pertaining to PORDCH01-change purchase order Idoc. The vendor raises a claim purchase order in his system and eventually a return sale order is created at the central system and i am using a custom program to generate idoc's of type PORDCH01 and propagate it back to the vendor , while doing so I need to change the value of the field LFRET(Delivery Type for Returns to Vendors) , the Idoc doesnu2019t seem to have this field in any of its segments and even if i extend this idoc , i donu2019t have appropriate exits in the inbound function module which let me map this data field to the required field EKPO- LFRET.I donu2019t want to go for a custom solution so Your help is much appreciated .
Regards,
Rethish..
Edited by: Rethish Radhakrishnan on Sep 6, 2011 10:40 AM

Hello Raja,
Just a further question in that case
Can I used Message type ORDRSP and basic type ORDERS05 on both the sides i.e. SD side and MM side?
Any changes made in sales order should update the PO.
As with the current situation i can not use PORDCH idoc on SD module side. Pls let me know.
//Guru

Purchase order locking issue

Hi ,
We are processing IDoc. The IDoc FM does GR of STO by using MIGO transaction via BDC , then FM also does GR of STO Delivery number by using VL02N transaction . MIGO transaction is successful but while doing GR of STO Delivery number via VL02N we are getting an error like ' Purchase order XXXXXXXXXX is currently locked by user XXXXXX .
This happens if we process the IDoc in background . If I process the IDoc in foreground by putting breakpoint at MIGO and VL02N , it executes successfully .
I feel it is a locking issue . I tried using FM DEQUEUE_ALL , MM_DEQUEUE_DOCUMENT after MIGO but it did not work out .
Please suggest for any pointers on this locking issue .
Regards,
Kiran.

Forget about WAIT statement.
Use:
set update task local.
...before starting MIGO.
regards

Purchase order status issue

Hi Everyone
I am having an issue with the status of Purchase order. When the Purchase order has single account assignment, everything is fine. But when I create a purchase order with multiple account assignment, the first line item is correct but when I ad second line, the still to deliver quantity gets added correctly but the amounts only reflect the recent item and not the previous one.
For example:
Item 10            Quantity 10
Item 20            Quantity 10         CC xxxx         GL account 666666
                                                   CC yyyy         GL account 666666
Status:    Ordered        20              200
                Still to deliver 20             100
Please help me with this issue.
Thanks,
Shalu
Edited by: Shalu G on Feb 9, 2010 12:07 AM

Resolved myself

Excise duty condition type and Purchase Order Print Issue

Dear Friends,
We have a issue related to Purchase order print out.
We are maintaining TAXINN.
We have implemented CIN and we are maintaining Excise Conditions i.e. Basic Excise in JMOP
In FV11 we are maintaining values for JMOP with plant and material Group combination.
In Purchase Order Tax calculation is happening correctly.
But issue is to find the value of taxes for Purchase Order Print.
We are using function module CALCULATE_TAX_FROM_NET_AMOUNT
and passing values of Company Code, Country, Currency, and Base amount to get the entries in condition types.
But we are not getting any entry even after passing the values.
How we can get these values in JMOP.
Regards
Kant

Why do you want to calculate the taxes during the PO Print when you are getting correct values in PO itself?
Modify your print program with pulling values directly from EKPO/ EKKO Tables and display it to Spool.
check with ur ABAP Person

MM Purchase Order IDOC NEU output type configuration

Hi All,
after creation of Purchase Order in ME21N in ECC 6.0 server, i want an IDOC for Purchase order to be created...........
i saw there is a standard output type NEU and it has EDI and Distribution Model as medium..........
when i went to ME21N and specified in message button output type of NEU, then the PO which i created had a NEU in messages but on opening a new session and running ME21N and creating a second PO, then in this PO there is no output type for NEU....
So i want to know in SPRO where is the exact location which specifies which output type will be triggered for IDOC creation on PO creation in ECC for message control...............
plz help guys...........

Hi,
If it configured for EDI and Distribution Model , now check condition record in T.code:MN06{ if you are geeting for one PO, you should get for other PO also)
Also check the following confi. details for Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order{NEU}
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create ,,,use medium '6'
Now you create PO (ME21N) and save it and then release.
Also check in NACE t.code for standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines and for the output type for default values, a communication strategy needs to be maintained in the Customizing that supports . You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy).
Regards,
Biju K

Purchase order script issue

when i copied the medruck form and then saved the data into nace transaction and then went to me22 and when i clicked on messages and i got the output screen stating output NEU is not defiened and i clicked on f4 button and found out there is only email option in it, how i need to save it and execute my form and what is partner tab in the screen, what i need to give in it.

using NACE tocde we can assign print program to form.
goto NACE->select the Application type(EF-purchase order)->select output types->NEU for new PO printout->double click on process routines_> sscroll right->specfiy ur form and print proggram there(instead of MEDRUCK give ZMEDRUCK)->save
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Hope this helps.

Purchase order idoc issue

Similar Messages

Maybe you are looking for