Purchase Order Printing on Pre-printed stationary

I feel very difficult to print my purchase order
on our pre printed stationary using 6i report.
Is Text_IO utility help me .. or any other tool is
there to print critical report on preprinted stationay.
Presently, I am printing my PO by ORACLE RPT tool. old version.
Pleae Help Me ..
Regards
Milind Nikumbh
KSPL
Pune

Hi Milind
I see what you've got.
It is not uncommon to use character mode output for pre-printed stationery.
This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
Design and run the report with MODE=CHARACTER from the command line.
You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
Regards
Sripathy

Similar Messages

Printing on Pre-printed stationary from XML Publisher

Hi,
I have a requirement where a report is to be printed on pre-printed stationary from XML Publisher. The stationary would be NCR paper and has to be printed from a dot matrix printer.
My first question is whether report generated from XMLP can be printed thro'
dot matrix printer, coz as far as i know it takes only character format .If yes, do we need any special handling?
If anybody has any experience related to this problem, please let me know the approach.
Can mail me at [email protected]
Regards,
Satrajit

Hi Milind
I see what you've got.
It is not uncommon to use character mode output for pre-printed stationery.
This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
Design and run the report with MODE=CHARACTER from the command line.
You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
Regards
Sripathy

Purchase order price roundedoff in Print out

Hi
In purchase order material price is 0.068 USD but in Purchase order print view
It shows rounded off as 0.07USD
how to change it as 0.068 in PO print view
Thanks

Hello,
Please check up the ABAPer to see the logica incorporate in PO FORM.
If necessary you need to incorporate the logic into the FORM.
Regards,
Ravi

Automatic printing of purchase order in a particular printer

Hi
Do anyone know, the setting for automatic printing of purchase order by a particular purchasing group in a particular printer. The requirement is that The group has to print only Pur Oder in this printer.
I don't want to use SPRO>Material Management>Purchasing>Message>assign output device......
Thanks in advance.
Esh

First of all check your output type with MN06 if the Key combination avilable for outpur type then select that combination and creatae the condition records for your PO type with MN04 and assign the printers here by selecting that line adn clicking on the communication tab.
Or if you don't have the key combination with Purchase group then go to IMG-MM-Purchasing-message-output control - condition table - here use the existing table for purchase gorup or create new one with the combination oyu are looking
then create access sequence and assing to your message type then it will be available for MN04.

Printing on Pre Printed Stationery and Bursting Extra Lines

Hi,
I am new to BI Publisher. I have managed to build a RTF template to print a check on a pre printed stationery (For Oracle Apps). There are two issues I have:
1. The check I need to print has the invoice lines on top repeated twice and the actual check at the bottom. The isse is when i print multiple invoice lines and it exceeds the section allocated for invoice lines, it pushes content down and my alignment is destroyed. What i need to do is once a certain number of lines are printed it should print the balance lines in a different file and continue the check as usual. I figured that bursting may be an option but most of the stuff on the internet points to pushing the content through email when bursting. Is there anyway to achieve this.
2. When displaying output in columns I want to achieve this in a table not using word colums
<Invoices Section>
c1 c2
Invoice Num - Amount Invoice Num Amount
1 10 4 10
2 9 5 9
3 20 6 34
<end Invoices Section>
Extral lines after the end of this section should go into a differnt file
Any help will be greatly appreciated. Thanks

Hi user953712,
1. Check format should use fixed row enumeration matched to the number of remittance lines per stub setup on the Payment Document in EBS.
2. "not using word columns"? I'd be using a table in Word. Is this a text based format? If so consider ETEXT.
"should go into a different file"? Sounds like bursting or some other mechanism.
Regards,
Gareth

How to define a purchase order output print view as my element

Dear all :
I have created a purchase order and want to print,but i found the details of print doc is not my requirements.So,I want to change it .I don't know where the path is .THKS
Brian

Hello Jianfeng,
The purchase order layout can be changed using the SAP script/Form. You need to identify what you need to put on the purchase order output also you can include the client's logo and other standard and constant details (tax number / registration number etc).
You have to give this requirement to the technical person (ABAPer). (S)he will make the changes in the script program and you need to assign this form to the PO printing program.
In standard SAP version, Form MENDRUK is available for Purchase order printing.
Once form is developed by the developer, you need to assign this form in customization,
SPRO--> Mat Managmenet --> Purchasing --> Messages --> Forms Layouts for messages --> Assign form and output program for purchase order.
Hope this helps.
Regards
Arif Mansuri
Reward the points if answer is helpful.

Problem in Purchase Order Printing in the TCODE ME9F

Dear Experts,
I am workning in the Upgrade Project from SAP 4.6C to ECC6.0.
When i change the Line items of the Purchase order in SAP 4.6C and take the print out in ME9F it shows all the Changed line items and Unchanged line items.But in ECC 6.0 if i change the Line item of the Purchase order and take the print out in ME9F Transaction it shows only the Changed line items and it is not showing the Unchanged line items.
Can anyone help me why this problem occurs in ECC6.0 and How to solve this problem
Please Help me it is Very Urgent
Thanks & Regards
Ashok.

Hi Asok
Is your problem resolved? I am currently facing the same problem.

Purchase Order concurrent request printing with XML Publisher

Need to use the standard Print Purchase Orders Report (Portrait) to print batches of purchase orders using the seeded XSL template that generates a PDF document. Used the white paper 295409.1 as a guide to create Data Definition and Template using the short name POXPRPOP, with seeded XML schema and XSL template. Changed POXPRPOP report output from text to XML.
Report completes successfully but gives no data. The PDF is blank. Am I missing a step or is the seeded template not compatible with the POXPRPOP report?

Did you check whether your Pasta is Setup Correctly?? check the pasta configuration required for XML Publisher there are couple of utils/libraries that need to be setup on the Concurrent Manager Node

Purchase order is printed in LOCL

Hi,
In "communication" i have put an output device ZZ01 different of LOCL. But when i print the purchase order, the document is printed in LOCL.
What's missing.
Thanks.

Hello,
Please go to...
System menu>> User profile>> Own data.
Under defaults tab, check if the output device is correctly defined. If not then correct it and clilck on save.
Now try to print and hope this should resolve the issue.
Regards,
Robin

Printing of Purchase Order

Hello All,
My client has a requirement that Purchase Orders should not be printed till after all Approvals has been done. Please, How do I got about it.
URGENT HELP NEEDED.

Hi,
Check Table CDPOS from SE16, PO release stategy change value always gets updated in the said table.
object Value (Purchase Order Number)
Check the table name-EKKO and field name-FRGZU ,also filter on New Value=X
Take the help of abapor and add the Logic if New Value=X then PO should get printed with Final Purchase order.
Hope this will resolve query.
Regards,
Sandesh Sawant

Re: Who printed the Purchase Order

Hi,
User A created a Purchase Order.
User B released the Purchase Order.
if User C prints the purchase order thru ME9F, how can I find out the info of who actually printed the Purchase Order.
we have cases of PO ending up in different User own spool.
Thanks

Hi
Please check table NAST for the details, who has Printed the PO.
The user ID of the person who has issued the putput will get populated in the field
TDRECEIVER
Please check the same using SE16N , give the Object key as the PO number & application EF
Thanks & Regards
Kishore

Printing messages on Purchase orders

Is there a way to print special messages on Purchase orders- e.g. "we will be closed for Thanksgiving- no deliveries will be accepted" or "we will be closed on Jan 1& 2 and no deliveries will be accepted".
We are not looking to print these messages all the time- only when applicable but on all PO's at that time.
Is there a way to configure this message and it will trigger automatically on PO's where delivery would be somewhere around thanksgiving or New years? How does this message get trigggered to be printed on applicable PO's? Or do we need to do a custom program?
Any ideas? Thank you in advance
Raj Patel

Hello Raj,
There are two option to meet your requirement.
Option 1. Maintain standard text with SO10 transaction and pull that in your PO script, You can design your script with one special message box so whenever you want to give special message you can go ahead and change the standard text in SO10 transaction. it will print your text message in all your printout/output.
Caution: You need to change stardard text when you dont need that.
Option 2. Maintain Z table for special text and pull the field in purchase order script. it will print for all your output. You can maintain this table with SM30 transaction code and change the text as per your requirement.
Hope this helps.
Regards,
Arif Mansuri

Change output - purchase order - stop print based on criteria

Hi,
In config (print relevant purchase order changes), we have he purchase order indicator turned on for a specific field, so every time we change that field in the purchase order its going to print , however, for some types of material (info is available in EKPO) i need to contol the print ( print or not to print) , please let me know the appropriate user exit or enhancement where i can control the print.
when the PO is approved in ME29N system generates a print and i need to control it. any suggestions are welcome
Thanks,
VY.

Hi,
Check BADI "ME_PROCESS_PO_CUST".
Best regards,
Prashant

Printing Header Text in Purchase Order

HI,
Actually I had the problem. A smart form has been developed for printing Purchase Order. Here in smartform a field has been declared to accept whatever the text had keyin in Header Text has to appear in Purchase Order. It is printing correctly until it is of Two paragraphs which consists of two or max three lines. Whenever it is exceeding these two paragraphs even a single word. It is printing something from the middle and in a reverse way. To get the clear picture I will give the example below.
Ex. I) This Purchase Order has been given.
 Delivery has to be make on time.
In the above example it is ok printing properly.
Ex. II) This Purchase Order has been given after
 verification.
 Delivery has to be make on time as scheduled.
 On Delay PO will be cancelled.
In this IInd example the output is showing as
Output: to be make on time as scheduled.
 verification.
 This Purchase Order has been given after
 On Delay PO will be cancelled
 Delivery has
Waiting for your help.
Thanks in Advance.
bye
Abdul Mannan

hi,
Ofcourse, the field is a part of main window in Smart Forms. I will elaborate further, In Main window we declared one Table in the Tables Main Area there is a Row and in a Row there is a Cell in a cell we declared one Text Field which is taking that header text and printing it as output.
I hope you got it.
Waiting for reply with a good solution.
Thanks and Regards.
Bye.
Abdul Mannan

Pre-printed forms on IBM 5577 dot printer

Dear all,
I was wondering if there is any SAP tool in order to use pre-printed forms (with specific layout) on IBM 5577 dot printer which would allow to speciy a pre-defined layout.
Or do I have to define for each field the position on the pre-printed form thanks to SAPscript editor?
Regards.

HI Cany,
There is no such tool to identify the problem .In scripts and smartforms we have to define the layout pertaining to printer and its configuration settings.once the layout is defined and the printer is defined during the printing the printing begins automatically.in ur case u r talking about pre printed forms like application forms like cases, for this we have to know the length of the form initially and take care to identify the length of the field and also position.Hope u understand this.

Purchase Order Printing on Pre-printed stationary

Similar Messages

Maybe you are looking for