Purchase requisitions which created during Sales Order missing in MD04

Hi Guys,
I have an issue with MD04.
Purchase requisitions which created during Sales Order missing in MD04 are not appearing in MD04, but these are showing in ME5A. After MRP Run only PRu2019s are showing in MD04.
Requirement type used 511 during creation of Sales Order.
Please advise me if any config/ Master data is missing OR If required any enhancement.
Regards,
Purna

Did you checked for the Firming indicator in PR's?

Similar Messages

  • MRP creating additional purchase requisitions for the existing sales order

    Hi,
    We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
    When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
    We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
    Please advise
    Thanks in advance
    Srinivas

    Mangesh,
    If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
    Regards,
    Prasobh

  • Purchase requisition creation (STO) from Sales order

    Hi Gurus,
    Read the following scenario:
    Sales order is created with delivery plant A. No stock on plant A.
    Purchase requisition is created from plant B to plant A (intra-company flow or stock transfer order).
    Problem is that the purchase requisition needs a price. It is not logical because intra-company flow (stock transfer in same company flow) is like a stock transfer without purchasing. So in my mind, I don't have to maintain price.
    Also if I use ME27 to create manually STO between both plants, price is not asked.
    Other question is: is it possible to create directly a purchase order when sales order creation (and not purchase requisition, newt convert into PO)?
    Many thanks.
    Stéphane

    Hi Stéphane Vituret, Did you manage to find a solution for this. I have a similar problem as well.
    Please find the scenario below.
    Cusotmer places order of Mat-XX to Company A. The Company A creates PO to Company B. Company B delivers to Company A and then invoices Company A. Company A receives the goods into own stocks. Now the Company A delivers to the customer from its own stocks and then invoices Customer.
    I decide to go ahead with the Individual Purchase order solution and since the Company A is buying from Comapny B, I decided to integrate the Cross Company STO flow in the procurement part. Hence the flow in SAP is like;
    Cusotmer placese order to Company A
    Comapny A creates a Individual Purchase order type Sales order. So the Item category is TAB.
    This sales order generates a PR. PR is conveted into a CC_STO as thenvendor is Plant B in this case . Now this STO appears in the delivery due list of plant B.
    Now I genreate the delivery to move stocks from plant B(of co.cd B) to Plant A(of co.cd A).
    Here is the problem. I am not able to do PGI as the system checks for "sales order" stock at plant B and throws error
    "Sales order stock 36637 000010 does not exist". This should not be the case as the stocks should get attached to the sales order only when recieved into Plant A. Hence system should not check for "sales order stock" at plantB while trying to deliver from Plant B to Plant A.
    Lets take a normal IPO scenario.
    CusotmerA places order of Mat-A to Company A. This sales order generates a PR. The Company A converts the PR into a std.PO to external vendor. The PO from the sales order will have a account assignment "M- Ind. cust. w/o KD-CO". The stocks will be received into Plant with spl indicator "E" while GR (MIGO). Now the system ensures that this stock can only be delivered against the particular sales order. Thus the stock procured for the customerA is delivered to customerA and not consumed by anybody else. In this case there is only one delivery involved, in SAP, which is 601 mvmt type from the Plant A.
    However if the vendor becomes another Plant (Plant B) belonging to another company code then there are two deliveries involved in the SAP system one with mvmt type 643, from Plant B to Pant A, and the second with 601 from Plant A to the customer. Hence the system should check if the stocks are attached with a spl indicator only during the second delivery of 601 mvmt type. I am facing a problem because the system does it for the first delivery itself. If you know the answer please do let me know. I really appreciate it. Thanks a lot in advance.

  • Sub contracting Purchase requisition not created thru Service Order

    Hi Experts,
    I configured to create Service order automatically from Customner service.
    Now we have the SM03 repair service order .When we try to create Sub contracting Purchase requisition.
    (Selecting Subcontr tick in External tab of Components tab)system gives error saying  --
    Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'
    Message no. AD_SUBCON109
    I checked the notes and It was not help ful.I understand I was doing something wrong in creation.
    The control key used is SM03. Can any body help me in the above problem.
    Regards
    Rammohan.

    Dear Sen,
    The same error message refers to one of the following material provision indicators getting to me also:
    "S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
    "X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
    "F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
    also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
    getting following error "
    Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
    Can u tell me the config for MPI??

  • Purchase Requisition(MM) created from Maintainance Order(PM)

    The scenario is that when we are creating a Work Order from IW34 then PR(ME51N) is created in background against that Work Order. We have a workflow attched to the the ME51N/52N transaction in which we are checking the valuation price for the item and in turn check the release strategy through a BADI and an exit.
    The issue is that when an PR is created from the IW34 tcode the same valuation price check should be executed but this is not happening. Can anyone provide help me on this????

    The scenario is that when we are creating a Work Order from IW34 then PR(ME51N) is created in background against that Work Order. We have a workflow attched to the the ME51N/52N transaction in which we are checking the valuation price for the item and in turn check the release strategy through a BADI and an exit.
    The issue is that when an PR is created from the IW34 tcode the same valuation price check should be executed but this is not happening. Can anyone provide help me on this????

  • Sales orders missing in MD04

    Hi,
    We have a specific issue where some of the sales order which are already confirmed but are missing in MD04.
    We have not able to identify the reasons. For correction we are using the program SDRQCR21 which again displays the missing SO in MD04.
    My question - What does this program do which causes reapprearing of SO in MD04? Is it updating some table etc.
    What is SO related table through which SO information is diaplayed in MD04.
    Thanks in advance for the reply.
    regards,
    Mohit

    It is very difficult to establish what causes incorrect requirements.
    There are some notes that fix bugs relating to incorrect requirements. Do a note search for SDRQCR21 + your support Pack; some of the hits returned may be fixing a program error that relates to yuor issue,
    However, It has been my experience that user exits are almost nearly always responsible, so you should review all relevant user exits to see if they are having an effect.

  • Function Module to create a Sales Order in CRM

    Hi Experts,
    I want to create a function module which creates a Sales Order in CRM.
    As of now, I'm making use of the function module 'BAPI_BUSPROCESSND_CREATEMULTI'.
    I have product ID and Quantity.
    Please let me know what all rest of the fields are mandatory to create a Sales Order using this function module.
    Thanks in Advance,
    lakshman.

    Depending upon the configuration many things could be mandatory. Assuming no such things in your system, Process type (order type) is required and it is good to give the Sold-To business partner and the Org Details, for the Header information. For the item information, you need the Product and Quantity.
    In theory, in CRM, you can create a transaction and "save" it with lot of errors. So, even if you don't give enough information, you will have a transaction with error. You can later fix it the input to fix the errors.
    Best way to know is to use your SAPGUI (CRM Online) version crmd_order and find for your implementation.
    Easwar Ram
    http://www.parxlns.com

  • Purchase order created from sale order ( third party)

    Hi...
    In third party sale, when sale order is created in SAP system will automatically creates Purchase requisition which can be converted into Purchase order,
    My requirement is i need to identify against which sale order the above purchase order is created, do this purchase order has any reference of sale order.
    Is there any way where i can track the purchase order number entered while cretion of sale order in the purchase order generated after creation of sales order.
    Suggestion will be worth rewarding.
    Regards
    SARFARZ

    Hi
    I think you are little bit confused.The PO number entered while creating the Sales order is nothing but the customer Purchase order.This we may receive in different forms.Hard copy or Mail etc.We will give this number as a reference in sales order.
    Where as for third party orders, depending on the schedule line category (SD), PR will be generated.This will PR will be converted in to PO.In PO item detail, you can find account assignment tab, where you can find the sales order number.
    If you want to link customer PO to the SAP PO, then you need to link the two tables.
    Regards
    Ramakrishna

  • Creating SD Sales Orders from a Purchase Order

    Does anyone have any detail documentation for creating an SD Sales Order as an output message from a purchase order. We would like to implement a process where we generate a sales order to a specific sales organization automatically from a purchase order in a different company code.
    Any help would be appreciated.

    Hi,
    You can configure this scenario using ALE/IDOC . I dont have any docs but i remember that i had setup this few years ago.
    Create PO , attach output type , output type linked to process code , process code linked to sales order relevant IDOC Type and send to receiver as outbound IDOC ,
    The recepient receives this as an inbound and used this data to create a sales order in his company code.
    Thanks,
    Sudhi

  • How can I create a sales order with reference to a purchase order?

    How can I create a sales order with reference to a purchase order?
    Thanks in advance...

    Hello,
    you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
    Prase.

  • Purchase Order created against sales order.. report

    Hi Folks!
    I want to see purchase orders created against sales orders.
    Is there any report?
    Regards

    Hi,
    You can develop your own report by using table VBAK-VBELN(sales document),VBAK-BSTNK(Customer purchase order number).
    Just try....
    Hope it helps you...
    Regards,
    Jaheer.

  • Can we create a sales order with refrence to a purchase order(me21n)

    hi all
    I have a query can we create a sales order with refrence to a po.my scenerio releted warehouse. I am recievening a the goods from client (from port) and storing it in my warehouse. so i m charging the client some cost(transporation cost ,machine handling cost etc) so when I am doing goods reciept(po----inbound delevery). so the moment i will doing the grn i want to charge my customer. so i want to create a invoice .  so please suggest me how to map this scenerio in sap. plz plz help me out

    Not possible to create sales order with reference to PO.
    but if to capture cost, you can consider adding cost to customer's invoice.
    e.g.
    SO -> PO -Inb/IR -> GR -> OB -> Inv(Add here)
    to add in that invoice, its either manual or through automatic condition.

  • Update error in  RV_SALES_DOCUMENT_ADD during Sales order creation

    I get an Update/ ABAP runtime error during Sales order creation. The error occurs during processing of the update module -RV_SALES_DOCUMENT_ADD.
    This error does not occuring always, as I am sometimes able to create a Sales order without getting update error. I am getting the error of all types of Sales orders and even contracts.
    Am I missing any configuration parameters?
    Thanks,
    Chitra

    Yes , I can see the error in ST22.
    While exceuting VA01 (Oder type OR, Entering Sold-to-party, Purchase order NO, Material, Qty, Plant),
    - I get run-time error "Run-time error "GETWA_NOT_ASSIGNED" occurred".
        Analysis of error shows:
         Update terminated in "Update module: RV_SALES_DOCUMENT_ADD"
          Fails in the Read table in one of the form
            Termination occurred in the ABAP program "SAPLV45U" - in "VBAP_BEARBEITEN"
    The main program was "RSM13000 ". In the source code you have the termination point in
    line 147 (READ TABLE FYVBAP WITH KEY VBAP_KEY.)
    of the (Include) program "LV45UF0V".
    The ABAP's say the functional module is trying to do an 'UPDATE' instead of 'INSERT" in the internal table FYVBAP.
    Thanks,
    Csuman

  • Automatic creation of intercompany PO when creating a Sales Order

    Hi Experts
    Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has setup a logistics company (company code X), which its purpose is to deliver goods to the final customer (home customers). However, sales orders are created from seperate chain of stores which belong to another company code (company code Y). This chain of stores have one sales organisation (since there is over 1000 stores under a chain). I need a way to represent that a sale originated from a store/plant belonging to company Y to end customer A. Also, I need a billing document (intercompany) from company code X to store/plant beloning to company Y.
    Issues: in the intercompany config (assign intern customer numbers to sales org) - is there a way to assign a customer number at site/plant level so that when creating an intercompany billing it can be picked instead of the one assigned to the sales org and where can this be specified in the sales order (remember: in my scenario there are multiple stores/plants that belong to one sales organisation and it is not possible to use one customer number linked to the sales organisation.)
    Desired results:
    Sales order from store/plant YY belonging to company code Y to end customer A
    Intercompany billing from plant XX belonging to company code X to store/plant YY
    End customer billing from store/plant YY to end customer A
    Thank you in advance for your help.

    Hello Tsmash  
    I think you can acheive this with Regular Sales order + Inter Company STO combination.
    Maintain customer numbers for each of the Plants from Company Y for the sales area belonging to Company X.
    Then do the config for STO in MM using this menu path:
    SPRO/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order
    Here, in the activity 'Define Shipping Data for Plants',  enter each of the plant-customers and the Sales area belonging to Comany code Y. Carry out other activities in this area appropriately.
    Similarly set up Custom ( say Z1) Special Procurement type for Plant YY for stock transfer from XX using this menu path:
    SPRO/Production/Material Requirements Planning/Master Data/Define Special Procurement Type:
    Here maintain procurement type as F, Special procurement as U and plant as XX. You may need to repeat this config for each of the receiving plants (over 1000 stores under a chain)  from co code Y.
    In the material master MRP 2 for Plant YY,  maintain procurement type as F and Special Procurement as Z1.
    Sales order will be received under Co Code Y and sales area belonging to Y form customer A,
    Because of the MRP config, a PO (STO) requirement will be raised on Co code X and plant XX. XX will send the goods to YY via a STO delivery using the Shipping data from 'Set up STO' config,
    Plant YY will send the goods to A and bill that customer. Co Code X will raise an inter-comany bill on Co code Y.
    That's how it should work. Try it and revert with any issues.

  • Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and  yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Thanks for your advise.
    However, I missed to mention that we have two set of users  One is for Finished Goods and another for Spares.
    Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
    As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
    Further, I tried to test one scenario through Processing Constraints but it did not work.
    Application
    OM
    Validation Type
    Entity
    Temp
    Short Name
    TBL
    Validation Semantics
    Created By
    Equal To
    User(Myself)
    Processing Cosntraint
    Application
    OM
    Entity
    Order Header
    Constraint
    Operation
    User Action
    Create
    Not Allowed
    Conditions
    Group
    Scope
    Validation Entity
    Record Set
    Validation Template
    101
    Any
    Order Header
    Order
    Above Created
    Please advise.

Maybe you are looking for

  • Posting Parked Documents

    Hi Gurus, I am FM PRELIMINARY_POSTING_POST for posting parked documents.Even though FM not throwing any error but documents are not posted.Please let me know any clues how to proceed.

  • Interactive Report Filter Problem

    Hello, I ran into a problem with an interactive report today. When the report first loads, no issue. If a filter is added, an error is returned. The error is actually generated by an assertion routine that raises and exception if a NULL value was pas

  • Re: BT Hume Hub dropping out Wi-Fi

    My broadband has been dropping now for 3 months, between 10 and 20 times a day, and after many hour long calls to BT the problem still hasn't been resolved. I am extremely frustrated with the service i am receiving, i keep getting passed from one per

  • Is ProRes as good as Cineform?

    I have 720p HDV material shot on green screen and wondering wether ProRes or Cineform would be best for compositing. My cameraman has shown me the material perfectly composited in Cinefomr using Premiere CS3 on WinVista. When I try it in FCP and Afte

  • Java multiple instances and mutex

    Hello, i have for example 5 instances with different names (but the same application). If i start a new instance, i will prove if a instance with this name is already started. in C# i can do this with mutex, but i don't find something in java? For ex