Purchased ringtone does not appear in list in settings/sounds/ringtones

Hi I bought a ringtone on my iphone today and I can see it in the purchased downloads, and I can see on my MacBook after sync, but it does not appear in the list of ringtones on my iPhone, so I can't set it as my default. Can anyone tell me how I find this purchased ringtone and set it as my default ring?

I pressed the itunes icon on my iphone, up came the title screen, and one of the offerings on it was "Ringtones RCP Ringtones 1.0" you either buy the full library of the tones for $3.99 or just one for .99, which is what I did, I found the one I wanted (it sounds like a British telephone with that double ring-ring) and hit the buy button. It asked for my iTunes password which I gave, and then it downloaded. In other words, exactly like any other itunes song does.
Now it's sitting on my iphone in the downloads file. When I couldn't get it to appear in the settings/sounds/ringtones section so I could choose it, I thought maybe I should do a sync with my itunes on my computer, so I did that, making sure that "sync ringtones" was checked. Now there is a new file on my computer itunes called "Purchased on [my name]'s iPhone" however there is nothing in the ringtones folder on the computer itunes, and I've tried dragging it out of that purchased folder into the library and into the ringtones folder and it won't go in.
I can play it on my phone, and I can play it on my computer. it appears like any other song on itunes. but I can't make it become the ringtone on my phone!

Similar Messages

Epson DX5000 driver does not appear on list in'print using' box

Epson DX5000 driver does not appear in list despite the fact that I have downloaded the software.
When the printer is connected and I try and print I first go to 'add printer' in the print dialogue window. This takes me to the printer browser where the Epson DX5000 appears - at this starge I can't add as this option is not highlighted. Instead I have to go to 'print using' where I click on Epson - this is where the problems start as the DX is not on the very long list.

Hi Ali
Yes I have installed the software
I have been using another printer so I realise that I don't need to add printer each time - this is the first time using this new printer
After I 'add printer' I am taken to the printer browser where the RX5000 is listed (this is in the default browser mode) when I then click the RX5000 the name and location appear in the appropriate boxes but I am unable to press the 'add' button. I have to go to more printers where I then go on to look in the epson folder.
this is where I get stuck as my printer is not listed

Silverfast scanner does not appear in list of available scanners in 'import'

silverfast scanner does not appear in list of available devices in 'import' (elements 12)

First of all, have you installed the TWAIN driver?
TWAIN not installed | Photoshop Elements 9 and later

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

Album marked as "purchased" but does not appear in my purchased list

I am trying to re-download an album I bought about eight months ago, because somehow all but a few of the songs from that album were lost. It does not appear in my purchased music list, on my iPhone or iTunes on my PC, in fact none of the album, whether it is whatever remaining on my drive or not, appears. However, if I search for the album, in this case Trio Mediaeval's Folk Songs, the button used to purchase the album is greyed out and says "Purchased." It does not give me the option to download the songs though. How can I remedy this? Thanks.

Is the layer that you brought over the top layer in the stack of layers in the layers palette?

Purchased music does not appear in library

I just purchased an album but it does not appear in my library. Thinking I screwed something up went back into store to purchase. When I clicked purchase a pop up said you have already purchased this do you want to purchase again, a pop up said you purchased this already do you want to purchase again? I clicked No. Where is my music?

All purchased items will be put in the "iTUnes Music" folder on the PC where you bought them and then added tot he green "Purchased" playlist.
When you add these files to a new PC/iTUnes library tho, there not automaticly added to the purchased playlist. So first search the itunes main music library for purchased items. If not listed search the PC by going to Start>Search in windows select "Files and folders" (Not music) and in the search field put ".M4P" and search the PC

Yahoo toolbar appeared without my consent. Can't get rid of it. Does not appear in list of add-ons or in list of programs installed for uninstall. (Win7; FFx5) Please help me delete this annoyance.)

I was prompted to update Java. I got a YAHOO toolbar which I did and do not want. I can't get rid of it. It does not appear on the Add-on list, not in the programs list (to uninstall). Can't find anything with Yahoo in the name. I do not want to use View, because it keeps coming back into view without my consent -- I want it gone permanently.
The uninstall directions in Yahoo help call for click on pencil tool (which tool is not found on this toolbar). Firefox instructions say go to Add-on list, but the Yahoo bar is not there. There are several Java add-ons, but I don't know what they are and what happens if they are uninstalled.
Win 7; Firefox 5.0; Yahoo toolbar ver 2.3.8.20110620112826
Perhaps it is disguised as something else. If so please tell me what to uninstall.

Try RIGHT clicking on different areas of the toolbars on Firefox, mainly try right clicking on/around the url bar & forward/back navigation buttons. When you get the correct spot if will give you a menu with the toolbars available (whether or not they're active) and a couple other options. Just uncheck the Yahoo one & you should be all set.
As you say though it may be some other bar disguised as a yahoo bar. Any chance you can get a screen shot of it & post it here?

Boot DVD does not appear in list on Option Restart

Greetings - I am attempting to run Stellar Partition Manager to adjust two partitions on my SSD drive. I have setup a dual boot configuration where 10.6.8 as well as 10.7.2 reside on that SSD drive in two separate partitions. To adjust the partitions I must restart the workstation from a Boot DVD created using that software, however after restarting while holding down the Option Key, the DVD disc does not appear as one of the choices in the bootable drives list. I believe the DVD drive is functioning properly as I routinely use it to read and write discs, including loading software. I have reset the PRAM, but that has had no affect. So far I have not received knowledgable support from Stellar, and have kind of gotten the run-around. I am hoping I can independently work around this issue. Thanks for any thoughts. Scott

Hi Larry,
According to your description, my understanding is that the Edit web part option disappeared in the list web part.
I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
Please also check if the target audience is set in the web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Substitutions - field does not appear in list of 'substitutable fields'

Specifically, I would like to use a exit substitution to replace the content of the Structure PRPS-POSID field.
However, I cannot seem to use a simple substitution rule (since PRPS-POSID does not appear as a substitutable field in the PRPS list of fields that pops up when creating a 'Step'). Most of the PRPS field are availed as 'substitutable fields' but not POSID.
The user exit approach is proving difficult since I cannot add the following code unless I put in a data or tables statement (which is NOT recommended).
If proj-PSPID(7) <> prps-POSID(7) .
prps-posiD(7) = PROJ-PSPID(7) .
ENDIF.
Please help!

Hello Shrikant;
The requirement is to ensure that the WBS element numbering (prps-posid(7) ) will always match that of the Project Definition (proj-pspid(7) ). This numbering rule is required to comply with the Fund Centre numbering since the fund center number utilizes the Project Definition number as an identifier ( I will email you some screen prints).
If there is a discrepency between the WBS element numbering (prps-posid(7) ) and the Project Definition (proj-pspid(7) ) number, the requirement is to assign Project Definition (proj-pspid(7) to the WBS element numbering (prps-posid(7) . The transaction used to call the substitution exit is CJ20N.
A big thanks for your comments so far.
Peter Forster.

App does not appear in list of apps to sync

Help! I downloaded an app that is in the genre of Education. When I click on the device (iPod Touch), this app does not appear in the list of apps that I can select with a checkmark in order to sync from iTunes to the iPod. Also, when I display the apps in my iTunes library, the app is on the list, but I cannot drag it to the device. I can add other apps (games, etc) to this device using either of these procedures (syncing or dragging).

Is the app compatible with your model iPod?

IPhone does not appear in list of devices in iTunes in the cloud

my iPhone does not appear in the list of devices

Hi, cdv2007.
Here are some helpful troubleshooting steps I would recommend going through when your device is not recognized on a Mac.
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
If you are experiencing the issue on Mac OS X 10.6, try the steps in the article below.
Mac OS X v10.6: iOS device not recognized in iTunes after restart
http://support.apple.com/kb/TS3540
Cheers,
Jason H.

Cannot sync app to my ipod touch - does not appear in list to sync

Hello...
I am having a problem. I downloaded an app to my ITunes, but when I click on my ipod touch and go to Apps, it does not appear in the list.
I don't know if this contributed to the problem, but I had to create a different user account (the one I am using now) to get the None option to show up instead of having to enter a credit card to get a free app.
The app I am trying to get is See. Touch. Learn. by Brain Parade.
Kim

Thank you so much! what a swift reply - I am amazed! but my main problem is trying to transfer an app bought in iTunes to my desktop Mac. I thought 'seeing' the iPod in Devices would make it easier, but I am stuck... Can you help?

HT1473 Why my purchased music does not appear in iTunes after I tried to add it from my Mac?

After I tried to add MP3 file into iTune using "Add to Library" and it does not appear in iTune....

Hope this article helps you:
http://support.apple.com/kb/TS1538
Please reply with any further questions.

Airport BaseStation's name does not appear in list of workgroup's members

I have a windows workgroup called NUCFAM with two PCs running XP Pro in it.
I have replaced my linksys router with an Airport Extreme Base Station to which I have attached two printers and a disk. I have configured the AEBS to have the Airport Extreme name "celery" and I have configured the AEBS to be in the workgroup NUCFAM by using the Airport Utility>Disks>File Sharing panel.
On Windows, where I have installed BonJour, each of my printers is listed as located at celery in the printer's properties.
However, in Windows Explore>Tools>Map Network Drive if I click the Browse button
a dialog appears that lists, under a node labeled NUCFAM, the names of my two PCs but not the name of the AEBS, i.e. celery. Instead the AEBS is named by the same twelve hex digits that Airport Utility lists as its Ethernet ID.
And in a CMD shell
net view \ \celery
fails to find the network path. However,
net use \ \10.0.1.1
does find the AEBS and lists the disk's name.
Can I get the AEBS to appear on the Windows side with the AEBS's name?
Thanks.

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Purchased ringtone does not appear in list in settings/sounds/ringtones

Similar Messages

Maybe you are looking for