Purchased tab in "App Store" app doesn't work when AppleID is not an email address.

After updated my iPhone and iPad to iOS 6 (both 6.0&6.0.1), Purchased tab in "App Store" app doesn't work when AppleID is not an email address. This happened since 6.0 and I hope that it will be fixed in6.0.1 but it doesn't.
When I tap at Purchased tab in iPad App Store or Purchased bar in Updates tab in iPhone App Store, it just hang on "Loading...", but when I changed to other AppleID, it works. Apparently, my AppleID is not an email address but the other AppleID is an email address.
Not sure where to send my feedback to Apple about this issue.

http://www.apple.com/contact/feedback.html

Similar Messages

  • The email address the app store is asking me the password for is not the email address i am signed in under in the app store

    The email address-appleid that is coming up and asking me the password for in my app store when i am trying to update my apps is not the same email-appleid i am signed in under when i go to my settings and view my itunes and app store. Its a different apple id than i am using for my icloud, apple id, itunes, ect how can I get this to change where i can update and purchase new apps?

    codyme0310 wrote:
    The email address-appleid that is coming up and asking me the password for in my app store when i am trying to update my apps is not the same email-appleid i am signed in under when i go to my settings and view my itunes and app store. Its a different apple id than i am using for my icloud, apple id, itunes, ect how can I get this to change where i can update and purchase new apps?
    That means that you did not buy the apps using your Apple account. Niel has the correct answer.

  • After instaling mavericks  terminal, preview, app store, etc,  doesn't work anymore

    after instaling mavericks the terminal, preview, app store, etc,  doesn't work anymore...
    What have to do to solve this problem?

    You ran a defective third-party "utility" such as "CleanMyMac" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system.
    The first thing you need to do is remove that software, if you know what it is, according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

  • HT204266 My apple ID for the App Store on my Iphone is incorrect.  It is the email address of someone on my contact list and not me.  How do I change the Apple ID Password  on my Iphone to my Apple ID Password

    When I go on the App Store App on my Iphone my Apple ID is not correct.  It is the email address of someone on my contact list.  How can I correct this and replace the incorrect Apple ID with my ID?

    Go to Settings, iTunes & App Stores, click on the Apple ID. Sign out. Click again and sign in with your Apple ID.
    Is it possible that this someone in your contact list had the phone and downloaded an app for you?

  • Mac app store still doesn't work properly

    Hi any concern,
    Thank you before,has been almost 3 week.Yesterday I did Re-install OS X take almost 20 hours and then restart automatic around 6 am.But still when I click (update),(Install),(get) or any buttons doesn't work at all this happen on Mac App Store.On ITunes was Ok.I check on Console:
    4/17/15 7:31:08.503 PM com.apple.WebKit.WebContent[567]: ERROR: ITSExceptionHandler: {message:"TypeError: 'null' is not an object (evaluating 'document.querySelector("#header").addClassName')", url:"https://se.itunes.apple.com/htmlResources/2A05/da-storefront-autoinstallations.j s", lineNumber:"376"}
    4/17/15 7:31:14.489 PM com.apple.WebKit.WebContent[567]: ERROR: ITSExceptionHandler: {message:"TypeError: 'null' is not an object (evaluating 'document.querySelector("#header").addClassName')", url:"https://se.itunes.apple.com/htmlResources/2A05/da-storefront-autoinstallations.j s", lineNumber:"376"}
    4/17/15 7:34:16.802 PM Final Cut Pro Trial[576]: The function `CGContextErase' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
    4/17/15 7:35:18.194 PM WindowServer[89]: Warning: Program "Dock" posted a mouse-down, blocking hardware events, but did no further mouse activity.
    Please any idea?.Thank you

    I have followed the other discussions and done the suggested updates or deletes and to no avail.
    Unless you tell us exactly what you have tried, we have no way of knowing exactly which updates or deletes? aren't working for you.
    Try installing the combo >  Mac OS X 10.6.8 Update Combo
    It's ok to do this even though you are already running v10.6.8.
    Restart your Mac after the combo is installed, try the App Store.

  • Windows Apps Store Installed doesn't works.

    I have Windows 8.1 pro. Whenver a new app is installed in the windows apps store. It just shows up and then minimizes. I just checked my eventviewer(eventwvr), saw this error under windows logs-application-"Activation of app VideoLAN.VLCforWindows8_paz6r1rewnh0a!App
    failed with error: No such interface supported See the Microsoft-Windows-TWinUI/Operational log for additional information.". Don't know what to do. Please help me.

    Hi harishn007,
    According to the result of AppsDiagnostic.diagcab, there might be an issue related to the “Windows store cache’’.
    You could open Command Prompt and Run “DISM / Online / Cleanup-image / RestoreHealth” Command to check component Integrity.
    If component Integrity is fine and it still doesn’t work, I recommend resetting your Windows store cache.
    Please search and run wsreset.exe in Windows Charm bar to reset Windows store cache. It will Clear & Reset Windows Store Cache in Windows 8 / 8.1.
    Or you could reset your cache manually:
    Open’’ C:\Users\<user name>\AppData\Local\Packages\WinStore_cw5n1h2txyewy\LocalState’’ and rename ’’Cache’’ folder to “Cacheold”
    and create a new “Cache” folder.
    And also it might be caused by corrupted register information or user profile.
    I recommend you run following commands as administrator to re-register apps:
    powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register  'C:\Program Files\WindowsApps\<App full name>\AppxManifest.xml'
    You could find the App full name information in ‘’C:\Users\<username> \AppData\Local\Packages’’. E.g.,” Microsoft.BingMaps_8wekyb3d8bbwe”
    Let’s see what happens.
    Also, considering that the corrupted user profile will cause this issue, please test in new user account to see if it can work fine.
    Regards

  • After migrating, -1202 errors and App Store/Update doesn't work

    After migrating my 2008 MacBook Air to an MacBook Air media 2012, everything went wrong. Biggest problems: no synchronisation with mail and -1202 in iTunes and an endless spinning wheel in the App Store and Software update. Thrown my prefs away already. It has something to do with accounts and keychain I think, but can't find it...

    SKAshanchi wrote:
    From this article:
    http://support.apple.com/kb/HT5883?viewlocale=en_US&locale=en_US
    Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
    I don't have any restrictions set on my phone at all.

  • App Store Reports Lion is installed when it is not...

    I purchased OS X Lion from the App Store. I have downloaded it and went to install. The installation failed. I ended up erasing my drive and reinstalling Snow Leopard and then re-downloaded Lion from the App Store.  It was ready to install, however Finder was not so I restarted my computer. Now when I go into App Store it tells me Lion has been installed, which it has not been. How get it to install when it thinks that it has already installed?

    Perhaps it's hidden?
    From the App Store menu bar top of your screen click Store > View My Account
    In the Account Information window click: View Hidden Purchases

  • Auto-scrolling doesn't work when JFrame is not visible

    Hi, I have auto-scrolling implemented for my JTextPane that sits in JScrollPane - which lives in JInternalFrame. It works as excepted - as long as my application's JFrame is visible. When the JFrame becomes invisible, auto-scrolling simply doesn't work anymore.
    I've overcame this by scrolling down in "windowShown", but it's ugly because the user can visually see the scroll down when using this workaround (it jumps).
    I guess this is Swing's optimization, but I would really like to overcome it in someway. But it seems I'm not enough a swing hacker to do it.
    One thing to note is thtat, the auto-scrolling works fine when the JInternalFrame is NOT visible, but frame is.
    I've tried to override the isShowing-method of JInternalFrame, with no luck.
    Here's my scrolling method:
    public static void scrollDown(JScrollPane scroll) {
              JViewport port = scroll.getViewport();
              Rectangle rect = new Rectangle(0, port.getViewSize().height, 1, 1);
              port.scrollRectToVisible(rect);
              JScrollBar bar = scroll.getVerticalScrollBar();
              bar.setValue(bar.getMaximum() - bar.getModel().getExtent());
         }Anyone have ideas?

    At some point I had really hard time getting the auto-scrolling to work, as I got these weird little bumps after scrolling down.
    Adding scrollBar.setValue() seemed to 'just fix it'. It actually seems to be superfluous now.
    The scrolling is already wrapped in SwingUtilities.invokeLater() - in conjuction with printing text into the JTextPane and it works OK.
    I had some wrong info in the first post, the viewport actually does get scrolled down even when the JFrame is not visible. And by visible I mean JFrame.setVisible(false) - my application has a minimize-to-tray feature, which hides the JFrame.
    So I think the problem is 'just' a repainting problem. When the frame is shown, the previous scroll location is first displayed, and then a repaint is triggered that causes the 'jump down'.
    I'm not still sure how to fix it though.

  • I recently got iOS 6. When I go to purchased in the App Store it doesn't work. I had doodle buddy everything which I deleted to get the update. I had a lot of extras that were free on doodle buddy everything. I tried doodle buddy gold but it asks pay extr

    (Sorry about the terrible abbreviations up there I ran out of space)
    I really want doodle buddy everything again. Does anyone know how to get it.

    Chris CA wrote:
    Did you createa smart playlist? It's purple with a gear icon.
    And you set the criteria to
    Match rule:
    Date added is in the last two weeks?
    I tried it, but couldn't get it to work. I think I had trouble with the Rule. I put a Rule in as follows: Data added in the last five hours? I added music (data) but nothing appeared in my Smart Playlist. Oh yes - I named the playlist: Recently Added.
    What did I do wrong? Is it necessary to have a question mark at the end of the Rule? I couldn't find anything on how to create a Smart Playlist in Help. There is stuff in there, but it does not go into much detail, i.e., nothing on the proper wording of the Rule.

  • JPopupMenu doesn't work when invoker is not a Swing JComponent ??

    I've written some code that uses a java.awt.Canvas to draw some stuff, and I want to be able to bring up a popup menu over the canvas.
    The problem is that when I try to show the popup menu with my Canvas as the invoker nothing happens: no popup menu appears.
    I also have problems with other AWT components (e.g. with java.awt.TextArea the popup comes up with two clicks but gets hidden behinf the popup that TextArea decides to provide).
    However everything works fine when I use a Swing widget (e.g. JTextArea or JPanel) as the invoker of my popup menu.
    Is this a bug or an undocumented feature?
    The JPopupMenu.show(...) method will happily accept any AWT Component as the invoker. Also the API documentation says nothing on this issue. Also the Swing tutorials doesn't say anything about this.
    I'm tempted to conclude this is an undocumented feature, but that suprises me. Surely I'm not the first person to try and use JPopupMenu with an AWT widget as invoker? Before I file a bug report, can someone tell me if I'm missing something here?
    I have some code to demonstrate this; all you have to do is comment one line and uncomment another to repoduce this behaviour. Let me know if you would like me to post it.

    Quick followup for anyone reading this topic:
    The suggestion of using JPanel and overriding paintComponent(...) is the way to go. I had thought of doing this to begin with, but felt it would be more effort. It's not. It's the same effort as using AWT canvas, but gives better results, and doesn't stuff up JPopupMenu or anything else that wants to interact with a lightweight component.

  • Default Gateway doesn't work when entered in address bar

    I'm trying to get to my router's settings. The default IP address of my router (192.168.1.1) doesn't work when I enter it in the address bar. Neither does the Default Gateway that I got from clicking on start, run, typing cmd and then ipconfig/all. Does anybody know how I can access my router settings without resetting it?

    That seems to be the modem default gateway... is your PC connected to the modem via a USB cable? (sometimes that might be the case)... or what port of the router is your modem connected to?

  • I can't find the purchased tab in the app store app on my iPad

    Ok well the purchased tab that is supposed to be in the app store app on my iPad isn't there and I'm trying to see the app that have been previously purchased so I can find some the old apps I used to have on my iPod and put them on my iPad. I have done it before but I can't remember how to do it now.

    If you update to iOS 4.3.3 you should then see it in the App Store app. If you have iTunes 10.3 on your computer you can also do it there. Otherwise I think that you'll have to go through your purchase history on your account in iTunes on your computer.

  • App store - Purchases tab flickering cant download app

    My purchases tab is flickering  it shows both the app i purchased and also a grey message "no purchased apps"
    the grey download button has no lettering and is flickering solid grey alongside the app
    how do i download my app and play my dam game?

    Hi d@azedandconfuzd,
    Welcome to the Support Communities!
    I would suggest restarting your computer and then following the steps below:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    If you continue to have issues with this purchase, here's how to report it:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

  • I have face time installed on my iMac but when I go to the app store it doesn't show installed and has a.99c price. All other apps show installed. Is this an upgrade?

    I have face time installed on my iMac but when I go to the app store it doesn't show installed and has a.99c price. All other apps show installed. Is this an upgrade?

    The first thing to do:  Make a backup of your iPhoto Library. Don't update iPhoto without having a backup of your iPhoto library.
    When I tried I received the following message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
    This error message means, that you did not yet associate your copy of iPhoto (preinstalled on your Mac) with your AppleID by clicking the "accept" button at AppStore "Purchased" page.
    First try to "Accept" iPhoto on the Purchased tab and try, if you then can update iphoto from the Updates tab.
    Now check the "Purchased" tab. Is iPhoto among your Purchases to "Accept" or "Install"? Then accept and/or install.
    If it is not possible, delete iPhoto from the Applications folder .
    (don't empty the Trash).
    If it is not among your Purchases, open the AppStore main tab, search for iPhoto using the Search field, and buy it from the AppStore. If you already owned any version of iPhoto '11, this purchase should be free, from earlier versions it may be a paid upgrade.
    If all fails there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/
    I can delete the existing software and re-install but I don't want to lose all my photos.
    Your photos are in your iPhoto Library in your Pictures folder and not in the iPhoto application. Just back up the iPhoto Library as a precaution, but reinstalling iPhoto will not delete your iPhoto Library.

Maybe you are looking for