Purpose of Creation Profile in SA.

Can you please let me know the Purpose of Creation Profile in SA
Regards
Curlton

Creation Profile used for Quantity Aggregation for JIT & FRC schedules.
If you want to make use of stepwise release of Schedule lines, you can use the same. You need to use Doc type LPA.
Edited by: Ganesh M on Jan 23, 2012 5:46 AM

Similar Messages

  • Purpose and use of release creation profile

    Hi all,
    Can anyone explain with example the use and significance of release creation profiles in outline aggrement
    with examples
    Thnks
    Gan

    Definition: release creation profile
    An instrument used to determine the period in which releases (types of delivery schedule) are generated against a scheduling agreement and transmitted to the vendor.
    The creation profile controls the creation periodicity of the releases, the aggregation of scheduled quantities starting from the day after release creation, and the implementation of a tolerance check to ensure that releases are only created in the case of major changes to the overall delivery schedule in the system.
    Example
    A release creation profile for a scheduling agreement for which delivery schedule lines have been entered over several years specifies that releases are transmitted weekly from 01.01 to 12.31 of the first year. The release quantities are to be aggregated as follows:
    For a period of 10 days starting from the current date of release creation: no aggregation. From the tenth to the thirtieth day: on a daily basis. From the thirtieth day to the sixtieth day: on a monthly basis.
    regards
    kunal

  • Creation Profile in Scheduling Agreement and Schedule LIne

    Dear Experts,
    Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
    1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
    2.I'm creating delivery schedule respect ot Scheduling agrrement.
    3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
    4.I run MRP for the header material and I maintain the necessary SA number in Source list.
    5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
    6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
    Please clarify me on creaion profile.
    Thanks in advance
    PKB

    Dear Experts,
    I'm not getting any response regarding Creation profile which I posted last week.
    Can anybody explain me the use of Creation profile in Schedule line?
    From Standard SAP help documentation I'm not convince.
    Best Regards
    PKB

  • Creation profile based schedule lines

    Dear all,
    I release the Forcasting schedules based on the creation profile assign to the Scheduling agreement (Lpa)
    In the creation profiel i have maintained the Aggegation horizon as 0-60 (days), 60-90(weeks) and 60-999 (months).
    after release when i checked the schedules the aggegation is not properly.
    how system caculated the the aggegation whether it consider the working day only or calender days
    2. what is mean by creation indicator -R ( real time) B - mrp driven

    Hi,
    It depends upon the Planning Calendar specified in Creation profile customization.
    R- Realtime means using ME38
    MRP driven is self explanatory and are created by MRP when the source is fixed in sourcelist and MRP indicator maintained.
    Hope this helps.

  • Creation Profile in Scheduling Agreement

    Dear Experts,
    Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
    1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
    2.I'm creating delivery schedule respect ot Scheduling agrrement.
    3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
    4.I run MRP for the header material and I maintain the necessary SA number in Source list.
    5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
    6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
    Please clarify me on creaion profile.
    Thanks in advance
    PKB

    Dear Experts,
    I'm not getting any response regarding Creation profile which I posted last week.
    Can anybody explain me the use of Creation profile in Schedule line?
    From Standard SAP help documentation I'm not convince.
    Best Regards
    PKB

  • Where is the field release creation profile in scheduling agreement?

    Dear experts,
    I need to maintain release creation profile in Scheduling Agreement.
    please let me know where can I find this field in ME31L
    Regards,
    Shashidhar

    Found in More functions - Item details

  • Creation profile settings for Scheduling Agreement

    Hi Experts,
    I have a question regarding parameters of Creation profile maintained in Scheduling Agreement.
    In ‘General Parameters’, the Forecast delivery schedules there exists a parameter  ‘FRC:Aggregation’.
    I would like to know about the significance of using option ‘3’ as ‘FRC:Aggregation’ parameter in creation profile.
    Please provide some details regarding usage of above said Aggregation parameter in Creation profile.
    Thank you.
    Best Regards,
    Ashok

    If you work with release creation periodicity and planning calendar (lets say delivery schedule every Friday) there might be schedule lines in between and these were aggregated to this fixed day.
    Best regards,
    Hans

  • Assigning Creation Profile in the Vendor Master

    Help needed to find the release "Creation Profile" in the Vendor Master. I am not able to locate the input box in the Vendor Master "Purchasing Data" Tab.
    Already tried:
    Extras >> additional purchasing data >> data retention at plant level
    Purchasing view >> Extras >> Alternate data for a plant
    - the "Creation profile parameter is not there
    Any help is appreciated.

    Thanks for your reply. I should clarify the issue once again.
    Problem Clarified
    "Release Creation Profile" already exists (defined) in IMG and I need to assign it to a vendor in the Vendor Master on the "Dif. Purchase Data" which is plant specific. I couldn't find the field "Creation Profile" in any of the purchasing data.

  • Creation Profile

    Hi,
    My 'Creation Profile' field under SPRO > Materials Management > Puchasing > Scheduling Agreement > Define Screen Layout at Document Level > LPL > Scheduling control is missing/not appear on the screen. Anyone know why?
    I have already maintained the Creation Profile.
    Thanks,
    Anson

    Hi,
    I can view Scheduling Control in Screen Layout at Document Level of SA. Consult your Basis Consultant.
    Regards,
    Biju K

  • Significance of release creation profile

    Hi all,
    Can anyone explain with example the use and significance of release creation profiles in outline aggrement
    Thnks
    Gan

    Hi,
    Release Creation Profile
    Use: -
    The creation profile determines:
    - Which event triggers the creation of a scheduling agreement release (changes involving the lines of the overall schedule and/or the reaching of the next transmission date)
    - How the delivery dates are shown (aggregation and release horizon)
    - Whether
    Backlogs and Immediate Requirements are determined and shown in the scheduling agreement (SA) release Whether a tolerance check is carried out for SA releases that are created due to changes to the overall delivery schedule in the system
    Note: -
    The tolerance check is only carried out if lines of the overall schedule for an item have been changed and if you create SA releases using the release creation program (via Scheduling agreement ® Create SA release).
    Features: -
    A creation profile is defined on a plant-dependent basis and consists of the following areas:
    General parameters: -
    - Whether - and, if so, under what conditions - an SA release is generated (creation strategy).
    - Whether backlogs and immediate requirements are to be determined for the SA release type.
    - Whether or not the tolerance check is to be deactivated in the case of change documents created for SA releases with backlogs.
    Aggregation horizons: -
    - The Release Horizon for which released quantities are shown, and
    - The periods for which quantities may be aggregated.
    If your creation profile provides for aggregation, quantities and delivery dates set out in the lines of the overall delivery schedule stored in the system for a scheduling agreement are aggregated to form release schedule lines.
    If you use a creation profile without aggregation, or work without a creation profile, the schedule lines of the SA release correspond to the schedule lines of the overall delivery schedule for the scheduling agreement for the relevant period.
    Creation periodicity: -
    - Whether SA releases are to be created on a periodic basis (and, if so, at which frequency).
    Each time a scheduling agreement release is created, the system calculates the next creation date. Weekly and monthly releases are always created on a Monday (first workday of the period). The system takes the factory calendar as the basis for calculating the due dates for release creation.
    If you wish to create SA releases on a periodic basis, you should choose a creation strategy that includes Next date.
    Tolerance profile: -
    - Whether tolerances are are to be checked for scheduling agreement releases created as a result of changes to the overall delivery schedule. This allows you to specify that SA releases are only to be created following major changes to the overall delivery schedule.
    In the case of SA releases containing backlogs or immediate requirements, the system never checks tolerances.
    Activities: -
    You process creation profiles in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
    You assign a creation profile to a scheduling agreement item in the Additional data.

  • Mandatory creation profile on scheduling agreements

    Hello Gurus,
    I need to put a value on creation profile field on schedulling agreements. I have to choices:
         - Put the value on supplier data. It is a plant-dependant value i my client doesn't want to create this data.
         - Made it mandatory. This possibility doesn't appear through Scheduling Agreement -> Define Screen Layout at Document Level as usual in fields on Purchase docs.
    Anyone has an idea how made it mandatory (or de badi to change the value by code)
    Best regards,
    Nacho

    Dear Experts,
    I'm not getting any response regarding Creation profile which I posted last week.
    Can anybody explain me the use of Creation profile in Schedule line?
    From Standard SAP help documentation I'm not convince.
    Best Regards
    PKB

  • How to create Creation Profile

    Hello all Gurus,
    Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
    If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
    Thanks and Regards,
    Umakanth

    hi,
    Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
    Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
    In this step, you can define the release creation profile.
    The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
    You assign the creation profile to the scheduling agreement item in the additional data.
    The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
    In the release creation profile, you can define
    o   General Parameters
    -   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
    -   How backlog and immediate requirements are taken into account during release creation.
    o   Aggregation and release horizon
    -   If and how schedule lines should be aggregated during release creation.
    o   Release creation periodicity
    -    With which periodicity scheduling agreement releases are created
    o   Tolerance profile
    -    That for releases created as a result of changed schedule lines, the system performs a tolerance check
    o   Internet release
    -    Whether an Internet release is created during release creation

  • Relese creation profile

    why we maintain relese creation profile in sa agrement , and its custmization
    rsk

    Hi,
    I can view Scheduling Control in Screen Layout at Document Level of SA. Consult your Basis Consultant.
    Regards,
    Biju K

  • Release creation profile

    Hi,
    Is there any other parameter (other than release aggregation of release creation profile) that influence FRC schedule ?
    I have a SA with FRC schedule aggregation crieteria as 40 days daily and 370 days monthly...but it transmits only 340 days in FRC.

    Hi,
    Are you using Scheduling Agreement LPA Type.Because only then while creating SA you enter the Release creation profile.
    Release Creation Profile
    Controls:
    The creation periodicity of the releases (scheduling agreement delivery schedules), i.e. the period in which releases against a scheduling agreement are created and transmitted to the vendor, and
    The way in which the quantities transmitted to the vendor are aggregated (starting from the current creation date of the release)
    Example:
    The creation periodicity for a scheduling agreement for which delivery schedule lines have been maintained over two years provides that releases are created weekly from 1.1. to 12.31 of the first year.
    The release quantities are to be aggregated as follows:
    For a period of 10 days starting from the current date of release creation, no aggregation; from the tenth to the thirtieth day, on a daily basis; and from the thirtieth day to the sixtieth day, on a monthly basis.
    Regards
    Arun

  • Creation profile with required parameters

    Please can anyone tell me  how to create the new creation profile with the following parameters: Delivery on Thursday and creation on Wednesday.

    Hi,
    Settings for the Creation Profile
    You make the following settings in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
    General Parameters
    For JIT delivery schedules, you select Changed or next date. For forecast (FRC) delivery schedules, you select Next date only.
    For JIT schedules, you specify that backlogs and immediate requirements are determined.
    Aggregation Horizons
    For JIT schedules, you specify daily aggregation and enter 10 workdays as End. For FRC schedules, you choose monthly aggregation and enter 180 workdays as End.
    This has the effect that JIT delivery schedules show the daily quantities for the next 10 workdays and FRC schedules the monthly quantities for the next 180 workdays (9 months à 20 workdays).
    Creation Periodicity
    You specify weekly creation for JIT schedules and monthly creation for FRC schedules.
    Tolerance Profile
    You specify 10 days as the checking period for JIT schedules, since this corresponds to the release horizon. You enter 5% as upper and lower tolerance limits and choose Overall check.
    In your case JIT SCHEDULE IS VALID. I hope this will clear your issue.

Maybe you are looking for