Push a custom DHCP option in DHCP Offer

Hi,
I have Windows 2008 R2 acting as a DHCP server. I'd like to push a
custom option (created under Scope/Predefined Options and Values/DHCP Standard options)
during DHCP Offer.
Currently options in DHCP Offer are: 53, 1, 58, 59, 51, 54, 6, 255.
The reply (DHCP Request) contains: 53, 61, 50,54, 12, 81, 60, 55, 255.
How can I configure the DHCP server so the Offer contains my custom option?
thanks.

Hi,
You can add or remove options to and from the predefined list of standard options as needed. Although options are made available in this way, they are not assigned values until administratively configured at either the server, scope, or reservation.
Once you have manually defined an option, then expand Scope –
Scope Options(or Server options), right click and select
Configure Options, select the checkbox of manually added option in
Available Options list. Then click Apply –
OK to save the change.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

PXE-E51: No DHCP or Proxy DHCP offers were received

Ok so I'm new to this and decided hey lets have a go.
I got it all working great and then all of a sudden after a server reboot I got this:
PXE-E51: No DHCP or Proxy DHCP offers were received
My DHCP,DNS,AD and WDS are all on the same box, I spent hours trawling the net and didn't find the answer to my problem but have stumbled across it although about 10hours wasted for a really simple solution
The cause: seems my WDS side is loading before my DHCP is having chance to establish hense WDS can not talk to DHCP to get the pxe connection going.
What did I find:
If i close the GUI for WDS and open the GUI for DHCP, find my server int he tree and right click then select restart. wait for this to complete (that's the important part)
Once the above is done open my GUI for WDS and again find the relevant point in the tree, right click and restart
Low and behold my connected laptop is now able to connect to the WDS.
I posted this in hope that it will save someone else a heck of a lot of time (can't promise your issue is the same as mine as there are so many different possibilities.)

Because PXE and DHCP use the same protocol and listen on the same ports, having them on the same box is unwise. There is a work-around but the better option is to put the two services on different systems. The work-around involves configuring the
WDS server to use alternate ports as briefly discussed here:
http://technet.microsoft.com/en-us/library/cc771734(v=WS.10).aspx .
Jason | http://blog.configmgrftw.com

Cisco Aironet 1600 - DHCP Offer Problem

Hi,
I have dhcp problem with our new AP:
I add an AP to our LAN.
I make a simple configuration with a WPA authenticate.
I can connect some equipment to this AP and our DHCP give an address correctly.
We use adptator to give wireless connection to old station with old operaing system (adaptator example : Netgear WNCE3001)
This adaptor connect to AP and receive an address from DHCP.
My problem is the equipment behind this adpatator send a DHCP request, our server send a DHCP offer but never arrive to this equipment .....
Same problem with another adpatator (TRENDnet and ZyXEL)
I think Cisco 1600 dont return correctly the DHCP offer, perhaps i miss some configuration.
Anyone can help me ?
Thx
In attachment AP configuration
AP system information:
Product/Model Number:
AIR-SAP1602I-E-K9
Top Assembly Serial Number:
[removed]
System Software Filename:
ap1g2-k9w7-tar.152-2.JB2
System Software Version:
15.2(2)JB2
Bootloader Version:
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)

Now that I have googeld on your client (Netgear WNCE3001) I really understand want you are trying to accomplish. Want you want is this client acting like something called a workgroup bridge (at least, that is how it is called when you have an Cisco AP fulfilling this role).
With the Cisco deployment you configure the AP as a workgroup bridge with multiple client MAC (and IP) addresses behind it. If the infrastructure where the AP should associated with is non Cisco you can use the "universal mode" where you can just use one (wired) client connected after the AP.
Now back to your Netgear client. I have not seen this client in real life, but if I read the manual I'm getting the feeling that this client does a little more than only bridging. At least there is no option to really configure the workgroup bridge stuff and the WLAN interface is being called "Internet adapter". There is also a option for an LAN DHCP server, which is kinda confusing as well if you ask me.
However, the thing that we can try is using a static IP address on the wired client side and test if communication is possible. Could you please give the output of the "show bridge 1" and "show dot11 ass" commands in that situation? Last but not least you can test if your configuration works after configuring "config network ip-mac-binding disable" on the WLC.

Linux guest does not get DHCP offer through a bridged internal switch, but Windows guests do (laptop).

I also got trouble getting networking to work on my laptop. It has one Gigabit LAN and one wireless network interface.
I cannot get my Linux guests, I tried CentOS 6.4, Ubuntu 13.10 and Debian 6, to get a DHCP offer from my DHCP server on my physical LAN. Manual configuration using static IP addresses works, but I need DHCP for my laptop.
I tried a Windows 8.1 Pro 64bit guest and the Windows Phone SDK 8.0 and both connected fine to the internet.
Here is what I tried:
With the ethernet cable disconnected I was connected to my wireless network or LAN with WPA2 personal authentication. On this physical LAN there was a DHCP server.
I created an internal Hyper-V switch and then I created a bridge between this switch and my wireless interface. I always used this switch as the single network connection for my VMs.
I am using Windows 8.1 Professional 64bit.
Why are only Linux guests affected and is there a solution? Thank you.

Hi faustbusserl,
"I cannot get my Linux guests, I tried CentOS 6.4, Ubuntu 13.10 and Debian 6, to get a DHCP offer from my DHCP server on my physical LAN. Manual configuration using static IP addresses works, but I need DHCP for my laptop."
Does it mean that you have created an external virtual switch for Linux guests and they can not get IP from DHCP ?
Did you try to use legacy network card for the linux VM to get IP from DHCP .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

No dhcp offers when booting from network

I have 2 managed switches, a SLM2048 and a SRW2048.
Neither of these switches work with thin clients booting from the network.
My configuration:
A Ubuntu LTSP server:
More information about this here -> https://help.ubuntu.com/community/ThinClientHowto
The Thin client:
Intel mini ITX motherboards(D945GCLF2D) with 2gig of ram and setup in the bios to boot from the network.
Some background info:
When the thin client boot on a unmanaged switch it find the Ubuntu dhcp server and boots right away.
But when put on the SLM2048 or SRW2048 on the same network the thin client is unable to get any DHCP offers.
Window and macs pick up dhcp address fine and all devices show up on the switch fine, its just no luck boot thin clients.
any help with this would be appreciated.
Thank you

Hello,
Have you tried removing broadcast storm Control on the switches in question or alternatively setting Broadcast Storm Control to 300 kbps? In case number 610813169 this technique was used to resolve such an issue. If not, you will likely need to open a case with the SBSC.
Regards,
Christopher

Custom DHCP range on Airport Extreme?

Hi Guys,
I've been googling unsuccessfully for a solution to this problem. It seems that the Airport locks me into 3 possible DHCP ranges. However, I need a custom dhcp range like this:
192.150.23.*
Is there any hack I can use to do this?
Thanks!
John Francis

Um, someone correct me if I'm wrong but that's not an internal IP. In fact, It looks like Adobe owns that class C subnet.
http://www.flumps.org/ip/c/192/192_150.html

Trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available???

trying to connect my iphone 4 to my home wifi network! my android phone gives me the option of pushing the arrows button on my router and on my android phone but cannot find the "push the arrows button" option on my iphone 4. is this option available?? and if so, where is it located???

No such option on an iPhone. Just go to Settings>wifi, tap the name (SSID) of your your home network from the list, then when prompted, enter the password.

How to add custom menu options in myaccounts module?

Hi experts,
To implement this, I have found myaccount.xml file in UI of myaccounts module. In this file, I found only menu headings but not menu options. Can anyone explain where data of menu options were populated from and how can I add my custom menu options? I also have tried to delete the menu heading but there was no effect. Please help!! I'm on WEC 1.0.
Regards,
Daro

Hi Daro,
the path to the billing module is "sap.com/wec/ecom/mc/billing". But nevertheless
1. you need only to enhance in your current modul the metadata.xml file with the link to your own myaccount.xml which you can create.
2. and then you can define within the new file the menu options you need.
3. the last step is to update your shop configuration with the new menu options.
Best regards,
Nico

Adding a currency in numbers missing custom format option

I just paid for numbers latest version June 2012. iPad 3' v5.1.1.     Want to format a cell as a currency not in the little list chosen by apple. Forums suggest using the custom format option but I can not see this anywhere? Any ideas how to add a custom format or how to extend the list of currencies to all currencies. If nothing else missing out a countries currency as too unimportant to include is just plain rude!

1) You posted to the Numbers on Mac OS X forum ( Apple Support Communities > iWork > Numbers >   Discussions ). The iWork for iOS forum is more likely to provide the direct answer...
   it is here: https://discussions.apple.com/community/app_store/iwork_for_ios
2) you can add custom formats (demonstrating from Numbers for Mac OS X) by opening the cells inspector:
Then naming the new format and setting the parameters of the format:
If the currency symbol is not in the list then you can preceed (or follow) the value with the proper symbol:
I decided to demonstrate this by showing a preceeding infinity sign before the amount:

When printing in Adobe, missing the Custom Scale option.

Adobe Version 11.0.2
Windows 7 64 bit.
Doesn't matter what type of network printer I select. When selecing to print a document, under Page Sizing & Handling, there is no "Custom Scale" option. There is on other workstations.
Thank you.

Very strange. The only thing I can suggest is to update to 11.0.5.

How can I delete the custom repeat option in the reminders app

Hi,
When I try to set a reminder to repeat every month the reminder app automatically sets a "custom repeat" of "every month that has 29 days in it". Where did this custom repeat option come from? I don't think I created it. How can I delete it?

Hi Chris,
Thanks for your reply.
I am using the native iOS reminders app. I have tried closing the app and powering my phone off and on, but to no avail. I was under the impression that one can set custom reminders using siri? I have friend with a toddler who was playing with my phone. I figured maybe she set off Siri and a custom reminder was set by mistake?

Custom shipping options?

Alright - I got a question I can't seem to find an answer to.
I've got an item. this item measures
W - 3.5
H - 5.75
D - 1.5
Then I've defined some custom shipping options.
These are the USPS boxes - where an items weight doesn't matter. Only the size of the items.
8.625 x 5.375 x 1.625 SMALL BOX
1 x 8.5 x 5.5 MEDIUM BOX
12 x 12 x 5.5 LARGE BOX
The idea here is to fit the items into the box - the whole " if it fits it ships " idea.
If you add two of these items into the shopping cart, it basically just doubles the dimensions of ALL the measurements of the items... Which will exceed at least one of W H D - so it returns no shipping options. It should just go up to the next size box, or at least return it as an option. It seems that this is seriously broken in a very big way. You could fit two of these items into a medium sized box - easy. but the system seems to kick it back since the height is larger than the height of the boxes... but only when you add them in together. the volume works.
The client does not care for how the shipping API's work - so this was my solution - if it fits it ships. Am I missing something seriously major here or is shipping in general just a HUGE flaw in the business catalyst system?

Hi Garuda,
The image thing would have to be implemented with some JS. You'd listen to the dropdown change and then render the image according to the shipping selection. I unfortunately don't have the code for you that will do this.
As for the free shipping option, you'd need to use a user defined option of $0 rather than the Free Shipping option and then set your weights so that both options are displayed at the same time when 2 or more items are added.
Cheers,
-mario

How to add custom start options in VS package

I need to add custom start options in VS package.
Example:
Instead of showing "start", need to provide options like "Start in Firefox", "Start in Chrome" and handle their events on our own.
Any references would be helpful
Thanks in advance

Hi Daro,
the path to the billing module is "sap.com/wec/ecom/mc/billing". But nevertheless
1. you need only to enhance in your current modul the metadata.xml file with the link to your own myaccount.xml which you can create.
2. and then you can define within the new file the menu options you need.
3. the last step is to update your shop configuration with the new menu options.
Best regards,
Nico

Save Custom Recording options as a set?

I thought from reading about the features in Captivate 2 that
I could save my own sets of custom recording options. Every time I
change files, I have to set up my custom recording options again.
It would save me time if I could save these as custom sets and be
able to choose them in the Record dialog. Is this possible?
Thanks,
Aaron

Well, obviously there is not an option in the recording
dialog. I was kinda hoping there might be an XML or INI file in the
program folder I could modify to add some custom recording sets. I
dug around in the folder but it doesn't look like this is possible.
I went ahead and submitted a feature request.
Thanks,
Aaron

Powershell send mail with custom voting option without using outlook object?

Hi,
I am currently sending emails through using new-object Net.Mail.SMTPclient because the server that runs the script does not have outlook application.
My goal right now is to be able to send automated emails that have custom voting option on it where people who receive it in outlook can respond through the voting system.
Is it possible to do this without using new-object -com outlook.application?

Hi,
I am currently sending emails through using new-object Net.Mail.SMTPclient because the server that runs the script does not have outlook application.
My goal right now is to be able to send automated emails that have custom voting option on it where people who receive it in outlook can respond through the voting system.
Is it possible to do this without using new-object -com outlook.applicatio

Push a custom DHCP option in DHCP Offer

Similar Messages

Maybe you are looking for