Push button on selection screen
Hi,
I have provided push button on selection screen after input fields I mean just below to input fields by using the syntax selection screen pushbutton
.. And it is appearing on the selection screen. As per the requirement I need to enter material number on the selection screen and if I press corresponding push button I need to call one transaction using bdc program. I wrote case sy-comm and corresponding user command ( whatever is there in the selection screen syntax) in when condition under start of selection event.
But the control is not going to that place after I press push button. If I put that code inside of at selection screen it is going. But I can not write all the bdc program and select queries inside of at selection screen event if so please suggest me how I can proceed.
I will give the points.
Thanks a lot in advance.
Hi,
SELECTION-SCREEN BEGIN OF BLOCK b_2 WITH FRAME TITLE text-018.
SELECT-OPTIONS s_fields FOR qpmk-mkmnr NO-DISPLAY.
SELECTION-SCREEN PUSHBUTTON /1(24) name USER-COMMAND flds.
SELECTION-SCREEN END OF BLOCK b_2.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'FLDS'.
PERFORM display_fields.
ENDIF.
Similar Messages
-
Error during creation of push button on selection screen
Hi,
I wanted to create push buttons on selection screen,
Code:
DATA DB1 TYPE VBAP-WERKS.
DATA DB2 TYPE MARA-MATNR.
SELECT-OPTIONS : SPLANT FOR DB1,
SCLASS FOR DB2.
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2,
FUNCTION KEY 3.
INITIALIZATION.
DATA FUNCTXT TYPE SMP_DYNTXT.
CLEAR FUNCTXT.
DATA: FUNCTXT_01 TYPE SSCRFIELDS-FUNCTXT_01.
FUNCTXT-TEXT = 'DEL'.
SSCRFIELDS-FUNCTXT_01 = FUNCTXT.
CLEAR FUNCTXT.
FUNCTXT-TEXT = 'EDIT'.
SSCRFIELDS-FUNCTXT_02 = FUNCTXT.
CLEAR FUNCTXT.
FUNCTXT-TEXT = 'CRE'.
SSCRFIELDS-FUNCTXT_03 = FUNCTXT.
But during activating, I'm getting the error as : Field "SSCRFIELDS-FUNCTXT_01" is unknown. It is neither in one of the specified tables nor defined by "DATA" statement.
Please suggest solutions to overcome this error.
Regards
Darshan MSHi,
trans. for examples of selection screen : BIBS
regards
Fred -
Creating push button on Selection screen application toolbar
Hi Friends,
this is a HR-ABAP report. I have to create a push button on Selection screen. when user clicks on that push button 'MODAL DIALOG BOX' has to be displayed containing some data.
plz kindly give some sample code to do this.
Regards,
Radhika Dasharatha.Hi,
1)Use SELECTION-SCREEN PUSHBUTTON /10(20) PUSH USER-
COMMAND 'ABC'. in selection screen.
2) Give the static name to button in INITIALIZATION event like PUSH = 'PRESS'.
3) At selection screen.
if sy-ucomm eq 'ABC'.
call FM HR_BE_GE_MODAL_DIALOG
endif.
Thanks
Sandeep
Reward if useful -
How to Add Push Button On Selection Screen
Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar -
ADD push button in selection-screen
Hi Guys,
I have a requirement.
In the selection screen on the report, I need a push button "Click".
When i "Click" First Time this it should display all the selection screen Blocks B1,B2,B3 from my selection screen.
For second "Click" it should Hide the Blocks B1,B2,B3.
I am doing the following code in my report:
But for first Click it is displaying the Blocks.And for the Second click it is not Hiding.
Please suggest on this.....
initialization.
if screen-group1 = 'A1' .
screen-active = 0.
modify screen.
endif.
endloop.
loop at screen.
if screen-group1 = 'A2' .
screen-active = 0.
modify screen.
endif.
endloop.
loop at screen.
if screen-group1 = 'A3' .
screen-active = 0.
modify screen.
endif.
endloop.
I am using " At selection screen:
at selection-screen.
if gv_flag = space.
loop at screen.
if screen-group1 = 'A1' .
screen-active = 1.
modify screen.
endif.
endloop.
loop at screen.
if screen-group1 = 'A2' .
screen-active = 1.
modify screen.
endif.
endloop.
loop at screen.
if screen-group1 = 'A3' .
screen-active = 1.
modify screen.
endif.
endloop.
gv_flag = 'X'.
elseif gv_flag = 'X'.
loop at screen.
if screen-group1 = 'A1' .
screen-active = 0.
modify screen.
endif.
endloop.
loop at screen.
if screen-group1 = 'A2' .
screen-active = 0.
modify screen.
endif.
endloop.
loop at screen.
if screen-group1 = 'A3' .
screen-active = 0.
modify screen.
endif.
endloop.
gv_flag = space.
endif.You are hiding it in INITIALIZATION block which means it hides only once before PBO. If you want to show/hide it in turn simply place all your code in PAI, not just part of it.
Regards
Marcin
Sorry didn't notice part of the code in the bottom
The logic should go like
at selection-screen.
if gv_flag = space.
loop at screen.
case screen-group1.
when 'A1' or 'A2' or 'A3'
screen-active = 1.
modify screen.
when others.
endcase.
endloop.
gv_flag = 'X'.
elseif gv_flag = 'X'.
loop at screen.
case screen-group1.
when 'A1' or 'A2' or 'A3'.
screen-active = 0.
modify screen.
when others.
endcase.
endloop.
gv_flag = space.
endif.
Regards
Marcin
Edited by: Marcin Pciak on Apr 1, 2011 12:33 PM -
Display output list by pressing a push button on selection screen.
Hi All,
Is there any possibility of displaying the output list by pressing a push button on the selection screen.
Thanks,
Neslin.Hi,
Just write the code like this
Case sy-ucomm.
when 'PRE'.
Here write the output list
" leave to list-processing. Write this statement
endcase.
Regards
Sarves -
Radio button in selection screen and push button
Hi experts,
I want to give radio button in selection screen side by side.
how we can do this on slection screen.
secondly i want to resize push button on selection screen.
please provide me the exact solution.
thanks
babbalHi babbal,
For Your Requriment yo can go to tcode se51 & then give ur program name & give screen number as 1000 because 1000 is default screen for all the programs and in se51 Press Layout button & then you can make changes to the Selection screen according to your requriment
Hope it will be Helpfull.......!!
Thanks & Regards,
Bhushan -
Hello Gurus ,
I want to insert data from selection screen into my ztable , I have activated save button in menu bar , with function text SAVE and function type , E , S , null , H , P all I have tesated , but it is not working , with case sy-ucomm , when 'SAVE' .
In same way Print is working but not save .I am not getting the prob .
Is there any problem , plz help me , I m in hurry .
I am waiting for all of your valuable reply .
Regards,
Joy .Hi Joy,
Check out the below related threads for placing the push buttons ... Frame logic accordingly as per your requirement ..
push button in selecion screen
Push button on selection screen
push button on selection screen\
PUSH Button in Selection Screen -
How to print the Module pool screen using a push button in the screen
Hi Every one,
i have developed a module program , which have a selection screen and it display the output in a structured way.
output includes boxes, texts etc...
my problem is :---
How to print the Module pool screen using a push button in the screen.When the "Print" button is pressed:
leave to list-processing and return to screen 100. "(current screen)
Call a transaction that runs your print program.
Rob -
Hi all
Is this possible display the push buttons in output screen (not in selection screen).
ex:
write:/ 'name'.
output:
name [here i want to display the push button]
regards
Prajwal.Hi
we can put like thsi
We can Get this using READ LINE and MODIFY LINE statements.
Check the code below.
Execute it and Double click on the Basic list to see the effect.
data box.
do 5 times.
write: / box as checkbox, 'Hello click on me' .
enddo.
AT LINE-SELECTION.
IF SY-LSIND = 1.
SY-LSIND = 0.
DO.
READ LINE SY-INDEX FIELD VALUE BOX.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
BOX = 'X'.
MODIFY LINE SY-INDEX FIELD VALUE BOX.
ENDDO.
ENDIF.
<b>Reward if usefull</b> -
Error in search help button at selection-screen
hi all,
i have a small issue.
i have created a seach help button in selection screen .
my code is as bellow.
TYPES: BEGIN OF ty_ZSD_SNID,
KUNNR TYPE KUNNR,
BAREA TYPE WERKS_D,
END OF ty_ZSD_SNID.
DATA : it_z TYPE STANDARD TABLE OF ty_ZSD_SNID.
selection-screen : begin of block b with frame title text-000.
select-options : skunnr for zsd_snid-kunnr.
parameters : pbarea like zsd_snid-barea obligatory.
selection-screen : end of block b.
INITIALIZATION.
SELECT KUNNR BAREA FROM ZSD_SNID INTO TABLE it_z.
SORT it_z BY BAREA KUNNR.
DELETE ADJACENT DUPLICATES FROM it_z COMPARING BAREA KUNNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SKUNNR-low.
IF it_z[] IS NOT INITIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'KUNNR' " data base table field name
PVALKEY = ' '
dynpprog = sy-repid " program name
dynpnr = sy-dynnr "screen name
dynprofield = 'SKUNNR-LOW' " layot field name
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = it_z[] " internal talble name
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
MESSAGE E000(zsdsn).
ENDIF.
my issue is , its working properly if records are there in my z table.
if no records are there in the table then if i do comment the last message statement then its working.
if i do uncomment like the above code, then its dumming.
what i should i do ??
kind regardsclosed because of no answer.
-
Radio Buttons on Selection Screen
Hi,
I have four radio buttons on selection screen in a frame, all belonging to the same group.
When the program is called using transaction 1, first two radio buttons are displayed. When the program is called using transaction 2, bottom two radio must be displayed.
I am doing this using the following code.
The problem is : When last two are displayed, there is empty space left on the top and first two are displayed there is empty space left in the bottom of the frame. How can this be taken care of such there are no empty spaces in the box frame?
Code:
Radio Buttons for Table Name
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-005.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_ot RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-001 FOR FIELD p_ot.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_exp RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-002 FOR FIELD p_exp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_cost RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-003 FOR FIELD p_cost.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_att RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-004 FOR FIELD p_att.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK bl1.
Initialization
INITIALIZATION.
Display Table Names depending on transaction calling the program
PERFORM display_table_names.
FORM display_table_names.
DATA : l_mod_id(3) TYPE c.
IF sy-tcode EQ 'ZVTEST1'.
l_mod_id = 'ONE'.
ELSEIF sy-tcode EQ 'ZVTEST2'.
l_mod_id = 'TWO'.
ENDIF.
LOOP AT SCREEN.
IF screen-group1 EQ l_mod_id.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDFORM. " display_table_namesHi,
REPORT Z_SALES MESSAGE-ID ZZ .
* Variables *
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: V_FILE TYPE STRING.
* Internal Tables *
DATA: BEGIN OF IT_SALES OCCURS 0,
AUART,
VKORG,
VTWEG,
BSTKD,
KUNNR_KUNAG,
KUNNR_KUNWE,
KETDAT,
KPRGBZ,
PRSDT,
BSTKD_1,
KUNNR_KUNAG1,
KUNNR_KUNWE1,
KETDAT_1,
KPRGBZ_1,
PRSDT_1,
ZTERM_1,
INCO1,
INCO2,
MABNR,
KWMENG,
BSTKD_2,
KUNNR_KUNAG2,
KUNNR_KUNWE2,
KETDAT_2,
KPRGBZ_2,
PRSDT_2,
ZTERM_2,
INCO1_1,
INCO2_2,
KSCHL,
KBETR,
END OF IT_SALES.
* Selection-Screen *
*Selection Screen 1
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE(25) TYPE C,
O_FILE(25) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
*Selection Screen 2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS: CAL_TRA RADIOBUTTON GROUP G1 USER-COMMAND FLAG,
SESSION RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
*Selection Screen 3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-003.
PARAMETERS: MODE DEFAULT 'X' MODIF ID BL1,
UPDATE DEFAULT 'X' MODIF ID BL1.
SELECTION-SCREEN END OF BLOCK B3.
*Selection Screen 4
SELECTION-SCREEN BEGIN OF BLOCK B4 WITH FRAME TITLE TEXT-003.
PARAMETERS: SES_NAM(25) MODIF ID BL2,
KEP_TRAS TYPE C DEFAULT 'X' MODIF ID BL2,
LOC_DATE TYPE SY-DATUM MODIF ID BL2,
USER TYPE SY-UNAME DEFAULT SY-UNAME MODIF ID BL2.
SELECTION-SCREEN END OF BLOCK B4.
* At Selection-Screen Output *
AT SELECTION-SCREEN OUTPUT.
IF CAL_TRA = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BL1'.
SCREEN-ACTIVE = '1'.
ENDIF.
IF SCREEN-GROUP1 = 'BL2'.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
IF SESSION = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BL1'.
SCREEN-ACTIVE = '0'.
ENDIF.
IF SCREEN-GROUP1 = 'BL2'.
SCREEN-ACTIVE = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
* At Selection-Screen *
AT SELECTION-SCREEN.
PERFORM VALIDATE_MANDATORY_FIELDS.
***************** INITIALIZATION ********************
INITIALIZATION.
LOC_DATE = SY-DATUM - 1.
* Start of Selection *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = V_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
TABLES
DATA_TAB = IT_SALES
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form VALIDATE_MANDATORY_FIELDS
* text
FORM VALIDATE_MANDATORY_FIELDS.
IF P_FILE IS INITIAL OR O_FILE IS INITIAL.
MESSAGE E000 WITH 'ENTER BOTH THE FILE NAMES'.
ENDIF.
IF CAL_TRA = 'X'.
IF MODE IS INITIAL OR UPDATE IS INITIAL.
MESSAGE E000 WITH 'ENTER BOTH THE OPTIONS'.
ENDIF.
IF SY-SUBRC <> 0.
IF MODE <> 'A' OR MODE <> 'E' OR MODE <> 'N'
OR MODE <> 'a' OR MODE <> 'e' OR MODE <> 'n'.
MESSAGE E000 WITH 'Mode should be either A, E or N'.
ENDIF.
IF UPDATE <> 'S' OR UPDATE <> 'A'
OR UPDATE <> 's' OR UPDATE <> 'a'.
MESSAGE E000 WITH 'Mode should be either S or A'.
ENDIF.
ENDIF.
ENDIF.
IF SESSION = 'x'.
IF SES_NAM IS INITIAL
OR KEP_TRAS IS INITIAL
OR LOC_DATE IS INITIAL
OR USER IS INITIAL.
MESSAGE E000 WITH 'ENTER ALL THE FIELDS'.
ENDIF.
ENDIF.
ENDFORM. "VALIDATE_MANDATORY_FIELDS
Regards
vijay -
How to disable save button on selection screen (1000) run from other report
Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José -
How to disable execute button in selection-screen
Hi,
I have already placed a execute button in selection screen but now I want to diable
1. All std buttons including F8
2. but excluding F1
regards
paulHi
Check this FM : RS_SET_SELSCREEN_STATUS
sample code :
DATA: BEGIN OF i_exc OCCURS 0,
code LIKE sy-ucomm,
END OF i_exc.
DATA: ws_repid like sy-repid.
CLEAR i_exc.
i_exc-code = 'ONLI'.
APPEND i_exc.
MOVE: sy-repid TO ws_repid .
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = ' '
p_program = ws_repid
TABLES
p_exclude = i_exc.
Laxman
Message was edited by: Laxmana Kumar -
Button on selection screen to link with PDF
Hello,
I have a customer request to provide documentation for each transaction on its selection screen. So they want to have a button on selection screen which should download PDF file stored on SAP application server. Is this possible (they said it is) and where can I found some instructions how to implement this.
Thanks for your answers.
TomiOk guys ... thanks but I found solution just in case someone else needs it:
It works ... just upload PDF document with SMW0 and this program can display it:
data: docu_key TYPE WWWDATATAB VALUE 'ZPP_DOCU_ZPPGM',
DOC_BEZ(10) TYPE C VALUE '123test'.
DATA:
l_tmp_path TYPE rlgrap-filename,
l_filename TYPE rlgrap-filename,
l_extension TYPE rlgrap-filename,
l_file TYPE string.
l_filename = doc_bez.
CONCATENATE 'MI' docu_key INTO docu_key.
CALL FUNCTION 'WWWPARAMS_READ'
EXPORTING
relid = docu_key-relid
objid = docu_key-objid
name = 'fileextension'
IMPORTING
value = l_extension
EXCEPTIONS
ENTRY_NOT_EXISTS = 1
OTHERS = 2
IF sy-subrc NE 0.
"MESSAGE s521 RAISING no_docu_disp.
EXIT.
ENDIF.
CALL FUNCTION 'GUI_GET_DESKTOP_INFO'
EXPORTING
type = 4
CHANGING
return = l_tmp_path.
concatenate l_tmp_path '\' l_filename l_extension into l_tmp_path.
call function 'DOWNLOAD_WEB_OBJECT'
exporting
key = docu_key
destination = l_tmp_path
changing
temp = l_filename.
l_file = l_tmp_path.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
document = l_file
synchronous = ' '
operation = ' '
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
synchronous_failed = 8
not_supported_by_gui = 9
OTHERS = 10.
Maybe you are looking for
-
my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it
-
Error 5002 when trying to look at iTunes Plus
I just bought a new MBP, and since I used my education discount, I got a $100 gift card to use in the App Store/iTunes/etc. I have a bunch of songs I bought back when iTunes had DRM, so I was going to use this money to upgrade some of those purchases
-
Which Wireless Router has a strongler signal than the E3000?
I need a Wireless Router that will have a strong signal for a 2 story house. I'm currently using a E3000 ans its not doing the job. Thanks!
-
Disc ejects before completion in iDVD
Hi, firstly I'm a little behind the times having only recently upgraded to Snow Leopard, my problem is iDVD. I have a collection of images that I am trying to burn via iDVD all goes well until the burning, the disc ejects about 8 minutes before compl
-
[JPA] Saving big numbers to the database
Hi, I have a JPA problem that I cannot solve. I try to save a large number to the database and JPA performs some strange rounding. For example, saving the number 9999999999999999.00 produces the following number in the database: 10000000000000000.00.