Push-notifications do not work when iPad connected to wifi

Both my iPads (iPad 2 and The New iPad) successfully connected to home wireless network. Internet works in general: I can browse web-pages through Safari, check emails via Mail, games send data to Game center, etc. But number of Apple apps do not work, such as FaceTime, Messages and push-notifications. When I connect to my phone's 3G hot-spot, these apps work fine, and I get dozens of missed push-notifications. I think, problem in wi-fi router settings, but I can't find out what's wrong. I've tried to change  MTU value to 1400, change 802.11 mode to g-only and switch off router's firewall - nothing changes. How should I set up my router to make it work? Thank you!

Take a look at this article http://support.apple.com/kb/HT4199
Hope it helps with your dilemma

Similar Messages

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • Push notifications WhatsApp not work.

    Push notifications WhatsApp not work. I only receive them when I open the app. I've checked the settings on iOs and Whatsapp and all is ok. I've also updated to the latest versions. Can you help me?

    I actually did, and here is the answer I received:
    "When you are sent a message in WhatsApp, but are not online to receive it, WhatsApp will automatically send your message to the Apple Push Notification Service (APNS). This allows an alert containing the message to be displayed, even when WhatsApp is closed or your phone's display is off. Most often, all that is needed to resolve notification issues is to ensure that all notification settings are enabled. Review these FAQ pages for troubleshooting steps:
    Notifications Troubleshooting
    Connection Troubleshooting
    Sending your message to APNS typically takes only a few milliseconds. Once your message is sent to APNS, any delays or failure to deliver the message as a push notification to your device are usually caused by issues with your phone or network connection. Currently, all of our systems are operating normally.
    If you are using iOS 7, and are confident that you have all push notification settings enabled in WhatsApp and the iPhone Notification Center, then there is likely an issue with your phone that WhatsApp cannot resolve for you. In this case, I recommend the following steps:
    Backup your entire phone to iCloud.
    After the backup is complete, Erase all content and settings.
    Continue setting up your phone as a new device (do not restore from the iCloud backup).
    Install WhatsApp and verify that push notifications are working correctly (have someone send you a few test messages while your phone's display is turned off).
    Erase all content and settings and restore from the iCloud backup. "
    I tried to delete everything from my iPhone and then restore my data with the backup on my computer but it did not change anything, I still can't receive any notification, unless I open the application... However, I restored immediatly my backup cause I was afraid it wouldn't work after, but I don't really think it would change something to first start as a new device and then erase all content again and restore it.

  • Push notifications are not working on current gen ipod touch

    Push notifications are not working on current gen ipod touch. I just got it a couple of weeks back. It is a refurbished model.
    It works fine on my iphone 4 flawlessly. I have compared the settings between the 2 and everything is similar. Not sure if there is anything specific that needs to be done for an ipod. Kindly advise.

    Yea...internet is working fine. tried everything. reset the network, turned off the notifications, rebooted and turned them on. Still not working.
    When I select auto settings, its asks for https url...what do i type in there?
    The most weird thing is that, it was working fine before the update :s

  • Push notifications does not work

    hey everyone
    i have been having this problem for 2 weaks and im going crazy i cant use y phone without push notifications.
    it happened when my iphone broke down and i took it to get it fixed and it was on v 3.1.2 and after they did it was 3.1.3 and everything was ok but the push notifications did not work
    my iphone is 3gS 32GB factory unlocked(i can use any simcard i want) and i bought it from Du service in UAE. i tried everything and they told me your phone is hacked or unlocked but its not.
    what does unlocking mean and why do i need it if its factory unlocked ??
    and how do i fix the push notification? i tried restoring but it didnt work

    oh and im not using the Du carrier im using Etisalat which is the other carrier company we have, is that maybe the cause ??? because i used to use Du when i bought it then i changed my carrier
    please help me
    Message was edited by: alizorro

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • I am using iphone 3gs 4.3.5 and my push notification is not working. I need help

    I have an iphone 3gs using IOS 4.3.5, my push notification is not working, i need help please

    I have restored the phone and synced it after that, but the problem is still there, i have not deleted the mail account because the mail is working, it only the applications that have push notifications are not working i.e Whatsapp, viber, ebuddy etc

  • I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working..

    my external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working.

    1.  These are the iphone forums.  So what does your question have to do with iPhones?
    2.  Contact Transcend for support.

  • Push notifications are not working (Facebook

    push notifications are not working (Facebook & WhatsApp) Iphone 4 iso 5.0.1, Not jailbreak Iphone

    Try deleting and reinstalling the app.
    Facebook app is notorious for being bad

  • Email push notifications are not working.

    I'm running os 5.0.1 on a iPod Touch 4.  Push notifications are not working for email.
    The only way to check emails is to go into the email app and check for updates.
    I deleted my email accounts and reloaded them.
    I removed all active apps and restarted my iPod and still does not work.
    Fetch New Data is set to Push.
    I hear a lot of problems with this but is anything beiing done?
    Why would this all of a sudden stop working?

    Your welcome, nice it's working now

  • I phnoe4s not working. when i connect to charger apple logo keeps blinking

    my i phnoe4s not working. when i connect to charger apple logo keeps blinking

    Hello abuwafi,
    The troubleshooting steps detailed below can help get your iPhone back into working order.
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Allen

  • I just updated my phone to iso 7 and it will not activate my push notifications or facetime and I'm connected to wifi help???

    I just updated my phone to iso 7 and it will not activate my push notifications or facetime and I'm connected to wifi help???

    Hi Heva79!
    You may want to try simply restarting your phone to see if you are able to get past that page after a restart. Instructions for doing this can be found here:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    If you are still experiencing this issue after a restart, you may want to attempt the steps for a reset as outlined in that same article. Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Push notifications & iMessage not working

    Push notifications used to work for but once iMessage came out I haven't seen a single push notification and I've yet to get iMessage working.
    iMessage activates just fine and verified my phone number without problems but can never send or receive messages.
    I have the maximum texting & data plans with AT&T in California.
    I have a stock never-been-jailbroken iPhone 4 with iOS 5.0.1.
    Things I have attempted already:
    • I have upgraded to 5.0.1.
    • I've tried changing my Wifi DNS settings to google's DNS servers but that didn't change anything - and I need it to work on cellular.
    • I've reset my networks settings
    • I've restored my iPhone to factory settings and set it up as a new iPhone
    • I've restored my iPhone to factory settings and restored from a backup
    Has anyone found a fix for this? I am unable to parcicipate in any games or use work collaboration apps without push notifications, and the lack of iMessage is troubling.
    Note: I've worked for Apple as an engineer for 6 years and write iPhone apps for a living. This is broken on Apple's side.

    There are hundreds or people wih this exact same problem and apple has no interest in fixing it or publicly giving and answer to the issues. 
    They Botched this release big time.  I look forward to having tp wipe my 64gb iPad and start from scratch.  Oh boy do I!!

  • Push notifications are not working on 4.3.5

    Updated the iPod Touch to 4.3.5 but the push notifications aren't working. Was working fine before the update. Tried changing the DNS to 8.8.8.8 and 8.8.4.4 and to the router settings. tried restoring both the ipod settings and the network settings. it still won't work! please help.

    Yea...internet is working fine. tried everything. reset the network, turned off the notifications, rebooted and turned them on. Still not working.
    When I select auto settings, its asks for https url...what do i type in there?
    The most weird thing is that, it was working fine before the update :s

Maybe you are looking for

  • Time capsule + 1TB external HD and 2 macbookpros

    How do I go about setting up Time Capsule for 2 notebooks? I have a printer attached to the USB port and have gotten a 1 TB HD and a powered USB hub. I'd like to put a 200 gb notebook on the Time Capsule and a 500 gb notebook on the 1 TB external dri

  • Connecting iMac wirelessly to XBox360

    Hello All, I need to find a way to stream video that is on my local network to my XBox360 in which is connected to my Airport Extreme. I use my iMac currently to watch the video but I want to put it on my 50" TV using my XBox. Please help!!!!

  • Need to start over with A3, can I restore and start again?

    I'm having so many of the same issues with A3 as most folks here plus a few others, with no fix in sight, and I'm thinking of just restoring my iMac via TM back to BEFORE I installed the trial version. Will this take me back to the A2 version and the

  • Sap treasury

    Hi, My query relating to the Reporting When we create the Flow Types. Where we can see Flow Types updated or not? how to edit the tables? Please guide me with regards raju

  • Volume Logic 1.3.2 and Leopard work-around

    I found a good work-around that got VL 1.3.2 working under Leopard. I found the "fix" at Veerle's blog... http://veerle.duoh.com/blog/comments/nomore_volume_logicupdate/ Here's the summary so that you don't have to jump to another site... Quit iTunes