Put osx tiger on a CD from DVD

hi i have the os tiger DVD and i need to some how put it on a Cd so i can boot it into my ibook that only has a CD drive please help

Much easier:
Get yourself a external DVD Firewire drive and push the ALT key after pressing the power button. Then select the OSX Tiger Install DVD when Startup manager shows up.
Or: Use the FireWire target disk mode if you or a friend owns a Apple Notebook or desktop with a DVD drive.

Similar Messages

Installing OSX 10.5, not restarting from DVD?

I'm installing from 10.4.9, the drive refuses to restart from the install disc and ejects it on restart and comes on in 10.4.9 again. I have tried restarting from system preferences start up option and also restart holding down the C key, all to the same result. I am aware of a keybord combination which allows this however don't recall it at present. Please any info. will be appreciated. thanks, Dugo

estrellamon wrote:
To follow up... this is the second time I have used this same install disc. The disc was on purchased at an Apple store. The same issue came up the first time... I had to call tech support for help, the tech help had me start up from the disc using a keyboard combination which presented start up options on boot up, however I don't recall the sequence now. Suggestions on this?
First, if this happened previously, you have either a defective DVD or a marginal optical drive.
To get the boot option screen, hold down the Option key during boot.

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

Can an intel iMac run OSX Tiger from an external hard drive?

Hi can anyone please tell me if it is possible to run OSX Tiger from an external hard drive on an Intel iMac running OSX 10.5 Leopard or later?
Or is it possible to partition the intel iMac's hard drive and add Tiger?
At the moment I am running Tiger on a partitioned hard drive shared with OSX Leopard and wish to upgrade to an intel Mac. I need tiger to run some software not compatible with newer Macs and also to access OS9 Classic. Thanx for your help.

IF you upgraded from Panther as you know you do not have an Intel based iMac. I beleive the limit of your upgrades on your current machine is going to be Leopard. The system requirements for Snow Leopard are:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply
This is straight from Apple so yes if you want to go beyond Leopard then you must purchase a new machine. My suggestion would be to begin replacing your legacy apps, you are extremely far behind and the longer you wait the more painful it will be to get current.
Good luck.

Tiger reinstallation/ booting from DVD problems

Hi guys,
I've been trying to reinstall Tiger (10.4.7) on my 12" G4 1.33 iBook, but either I'm doing something wrong or not eveything's ok with my system. I put the DVD 1 in, doubleclick the 'Install Mac OS X and Bundled...' icon, a pop-up appears, I click restart and the system boots back to desktop, as if there was no installation required at all (except for the 'my_name's G4' window open, with my harddrive, dvd and network icons). I tried booting it from DVD but when I try to hold the C key a grey screen appears with a folder symbol with Mac OS face icon switching with question mark, and it boots to desktop again. Any ideas anyone?

Some further info: When I try to boot holding an option key the only drive I can boot from is HD (despite the installation DVD being in the drive). I tried to check if the DVD is broken but I was able to copy everything from the DVD to my HD, still the Read before you install.app and Apple Hardware test readme.app files won't work, I tried copying them to my Applications folder with no result. I tried Optional Installs and managed to install languages support without any problems, yet after all these operations my Text edit and quicktime won't start (icons have changed to default .app icons and there's an error when i try to start them). All these can't be caused by the fact that the installed system is 10.4.7 and the disks are 10.4.2, can it?

Going from iPhone 3GS to iPhone 5 and Mac OSX Tiger

Hello,
I currently have one of the first Intel Mac Book Pro's running OSX Tiger. I also have a 3GS running ios 4.1 which I'm about to upgrade to the iPhone 5.
What is the best way to back-up/transfer my contacts/txt's/etc from my 3GS to my 5? I can't run the latest version of iTunes and eventually this year I will upgrade to a new iMac which would solve the problem...but for now I would like to transfer all my data over.
Thanks,
Mike

The problem with that is my current iphone is running ios 4.1 and my laptop is running tiger so I don't have icloud. Without upgrading to snow leopard and then to lion/mountian lion to get icloud is there any other option?

HT5517 i have apple tv and i could play my dvd on my macbook pro but now i cannot i get a black and white box i have vlc which apple store put on for me but thats no good because the film keeps jumping. i am wondering why i cannot play from dvd to apple t

i have had apple tv since last april and i could play films from dvd player from mac book but for some reason this has stopped working from dvd player when i put the dvd player on apple tv i get a black and white screen i can hear the film but i cannot see it, i went to my local store and they but vlc on for me but its terrible the film always jumps every time.
Can anyone now the reason this has happen as i watch film offern but its driving me crazy why i cannot play from macbook pro to dvd player. i have been told it was a sercuity problem with the films so do i use itunes every time i need to watch a film if so then apple tv is a waste of money thanks please help

This is supposed to happen, licensing issue mean that Apple can't AirPlay protected content to other devices. You might try VLC instead of Apples built in DVD player.

HT3910 Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

Your profile says you have 10.6, so why bother with the original 10.5 OS?
But to your question, before you erase anything, make a backup of your data for safe keeping and restoration. Having an external hard drive for this purpose is most useful.

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

Can I upgrade from osx tiger v10.4.11 to osx Snow Leopard v10.6 for 29$ ??

I was wondering if I could upgrade from osx tiger v10.4.11 to osx Snow Leopard v10.6 for 29$ or at a lower cost than full price. I do not need to upgrade that much because 10.4.11 is so great and I hate to leave it. Paying the full price of an operating system does not make sense to me. Can I do it cheaply because I am upgrading?

No.
The $29 upgrade is from leopard to Snow Leopard.

Putting Movies from DVDs onto iTunes

is it possible to put movies from DVDs to iTunes?
if so, how?
and will it transfer to iPod like it normally does?
tyvm
iPod Video Windows XP

Here's a guide.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.6) Several ext. HD (backup and data)

PE11 Rip from DVD- putting a menu on- burning that to DVD ruins quality

First, I've read some things here and there, but can't find the exact same scenarios in other posts, although I'm sure this is a fairly common problem (SIAP):
Here is a summary of the issue:
1) Our guy produced a video for our organization and gave me a DVD-R of the 11 minute project. I imported this into PE11 and on the timeline it says .VOB. Now on the desktop, the 481 mb VTS_01_1 file properties state that it is 720x480, 29 fps... although I find it strange that the clip as imported into PE11 in properties in the project assets window says it's 23.976 frame rate. Making things more confusing (don't even know if any of this matters) is that in an instance of Share->Export to Computer, the "source" says the video is 1920x1080, 29.97 fps. Don't know if any of this matters...
2) Anyways, the reason I ripped it is for the sole purpose of creating a menu on the DVD. So I picked a "HD" template, imported my own JPEG on to it, then attempted as best I could to erase all the buttons except for "Play Movie." AGain, not sure if the Menu functionality has anything to do with the issue, but I figured I'd mention it.
3) I've tried several times burning the video with both DVD-R and +R using both NTSC Dolby and Widescreen Dolby to burn to DVD.
The resulting DVD has a degraded, fuzzy image and the black frame lines at bottom and top seem to bounce and jitter.
The image on the original DVD is clearly HD and looks great, without any bouncing, jittering, etc. Also, the DVD app i used to watch the original on my computer is the same as I used to watch my own burned DVD... So PE11 has clearly degraded the image, something is going on in the export.
Another thing worth mentioning is that as I look at the video footage in PE11 on full screen, I can see that even in PE11, the video quality is not the same as the original DVD and there are obvious artifacts and just nonsense in the picture... Not necessarily as bad as the burn, but similar.
I've done a little reading on these forums about .VOB files... I don't fully understand them. Is it that the image is messed up from the beginning with an import from DVD? IS there a way to do what I want (take hiqual video from a DVD, put a menu on it, then burn it back onto DVD?) with PE11? Or is the only way to make a burn from the original source file before it was burned the first place?
computer specs:
lenovo P500
Intel Core i7 3520M 2.90 gHz
8gb RAM
windows 8 64-bit

LorcanPMiller
Please get a MediaInfo readout of your VOB at the onset to determine what you have, especially standard or widescreen.
http://mediainfo.sourceforge.net/en
Special Interest: Frame size, Frame rate, Display 4:3 or 16:9, Scan Type and Scan Order for which I am expecting Interlaced and Lower Field First.
Here is my take on your situation.
1. The Canon 6D can capture 1080p video (1920 x 1080 16:9 at 29.97 or 30 frames per second), but from what you wrote somewhere along the line someone put that through a video "authoring" program to convert it into DVD-VIDEO format on a DVD disc (720 x 480). At this point, we need to know standard or widescreen. Both standard and widescreen will be 720 x 480, but the widescreen will have a 16:9 flag included to stretch the video for display after encoding.
Question:
a. What is on that DVD disc....just a file name VTS_01_1 (file size 481 MB) or two folders named OpenDVD and VIDEO_TS? If you have a file, for Premiere Elements 11, you would use Add Media/Files and Folders to get the file in Project Assets. If you have the DVD disc in the DVD burner tray, you would use Add Media/DVD Camera or Computer Drive to rip the VOB and get the VOB into the project.
b.Your project is going to get messed up and confusing, if you let the program set the project preset for you. You will most likely end up with the default NTSC AVCHD Full HD1080i30 which is inappropriate for your project. So, before thinking or acting on Get Media....open a new project, go to File Menu/New/Project and set the project preset in the New Project dialog for NTSC DV Standard or NTSC DV Widescreen depending on what you find beforehand about the properties of your VOB MediaInfo Then use Add Media/and the appropriate choice based on what I wrote above about VOB already ripped vs DVD-VIDEO ripping.
c. When you have your VOB on the TImeline with the appropriate project setting, right click the file in Project Assets and verify Premiere Elements 11's interpretation of the file frame rate and other to determine if it agrees with the MediaInfo readout. It would be very unusual if there was a differnce, but...
d. Whether you have a NTSC or PAL project, all the SD DVD Templates have a frame size of 720 x 576 (PAL sizing). The ones tagged HD have a 1440 x 1080 frame size. Right now I would advise you to stay with the SD ones, but not be afraid to experience with a HD choice if it appealing and see what happening during encoding.
e. In all this, you did not say what the duration is of this 481 MB VOB file. The standard DVD disc is spec'd at 4.7 GB/120 min. That 4.7 GB in reality is 4.3 GB. You will frequently see the recommendation "for best results, do not exceed 90 minutes on this standard type disc". When you have your DVD disc in the DVD burner tray and are in the burn dialog of Publish+Share/Disc/DVD make sure to check the Quality Area of the burn dialog for the Space Required and Bitrate reading (8.00 Mbps is the max reading).
Based on what you wrote, I suspect that most of your problems were related to incorrect project settings. By the way, if you want to get rid of a menu button text, most of the time double click the text to bring up the Change Text dialog, highlight the text there, hit the delete key of the computer, then hit the space bar or enter key.
If you are replacing the menu's audio, max 30 sec with looping. If you use motion buttons in the menu, max 4.9 seconds. After you get the details of the project setup OK, we can focus in more on the menus...number of Timeline markers etc, and customization of the menus from within the program.
Lots of details. The answers and successes will be in the details. All the contributors here have given you a lot of ideas for exploration and experimentation.
Please do not hesitate to ask if you need clarification on anything that I have written.
Looking forward to learning of your progress.
Thanks.
ATR

Would I be able to upgrade to osx lion from osx tiger?

would I be able to upgrade to osx Lion from osx Tiger without upgrading to Snow Leopard first?

According to this info you will need to have the latest version of Snow Leopard installed....
http://www.apple.com/macosx/how-to-buy/
....and it will be a download only....

I cannot print after updating my MacBook Pro from OSX Tiger 10.4 to OSX Snow Leapord 10.6. Can anyone help me?

I cannot seem to print after updating my MacBook Pro from OSX Tiger 10.4 to OSX Snow Leapord 10.6. Can anyone help me?

Try re-adding your printer in System Preferences/Print & Fax. Not sure what type of printer you have, but if it was old and relying on an Appletalk connection, Snow Leopard dropped that support.

Logging into OSX Tiger from Vista

I can log into Tiger from my Win2000 machine, but I'm having trouble logging into OSX Tiger from Vista.
I got 1/2 way in using the login format:
Computername@login_name
And pass
- so it shows all Tiger drives - but then could not open a drive...
Any Ideas how to login in?

Had the same problem with Vista and OS X 10.2.8 and 10.4.8 sometime ago and found this solution somewhere in a forum:
If any of you are having problems with Vista logon to NAS devices running Samba, try:
Run secpol.msc (type it in the Vista start menu search field)
Go to: Local Policies > Security Options
Find “Network Security: LAN Manager authentication level”
Change Setting from “Send NTLMv2 response only”
to
“Send LM & NTLM - use NTLMv2 session security if negotiated”
Vista defaults to only send the more secure NTLMv2 protocol, which these NAS devices / Samba do not support.
Hope this helps - worked for me....

Put osx tiger on a CD from DVD

Similar Messages

Maybe you are looking for