PXE T01 file not found PXE E3B TFTP Error file not found error

Hi,
I was trying to deploy OS through SCCM . i have made DHCP server and SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
TFTP
PXE-T01: File not found
PXE:E3B: TFTP Error- File not found
1)Removed WDS service and reconfigured
2)PXE role removed and re assigned
3)renamed temp folder
4)DP updated
suppose if i am trying to access the port throgh telnet
i am getting
C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
Connect failed
SCCM PXEsetup.log
====================================================================
<05-17-2011 22:02:14> SMSPXE Setup Started....
<05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
<05-17-2011 22:02:14>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 22:02:14> Pre Req MSXML60 found.
<05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 22:02:14> Pre Req Wimgapi found.
<05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 22:02:14>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Installing the SMSPXE
<05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:02:35> ====================================================================
<05-17-2011 23:02:35> SMSPXE Setup Started....
<05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
<05-17-2011 23:02:35>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:02:35> Pre Req MSXML60 found.
<05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:02:35> Pre Req Wimgapi found.
<05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:02:35>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Installing the SMSPXE
<05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:38:26> ====================================================================
<05-17-2011 23:38:26> SMSPXE Setup Started....
<05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
<05-17-2011 23:38:26>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:38:26> Pre Req MSXML60 found.
<05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:38:26> Pre Req Wimgapi found.
<05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:38:26>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Installing the SMSPXE
<05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:38:26> WDS Service is installed.
<05-17-2011 23:38:26> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-17-2011 23:38:26> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-17-2011 23:39:47> pxe.msi exited with return code: 0
<05-17-2011 23:39:47> Installation was successful.
<05-18-2011 22:20:04> ====================================================================
<05-18-2011 22:20:04> SMSPXE Setup Started....
<05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:20:04> Deinstalling the SMSPXE
<05-18-2011 22:20:04> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
<05-18-2011 22:20:15> Deinstallation was successful.
<05-18-2011 22:20:15> Removing PXE Registry.
<05-18-2011 22:23:18> ====================================================================
<05-18-2011 22:23:18> SMSPXE Setup Started....
<05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
<05-18-2011 22:23:18>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:23:18> Pre Req MSXML60 found.
<05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:23:18> Pre Req Wimgapi found.
<05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:23:18>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Installing the SMSPXE
<05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:23:18> WDS Service is installed.
<05-18-2011 22:23:18> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-18-2011 22:23:18> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:24:11> pxe.msi exited with return code: 0
<05-18-2011 22:24:11> Installation was successful.
<05-18-2011 22:31:06> ====================================================================
<05-18-2011 22:31:06> SMSPXE Setup Started....
<05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
<05-18-2011 22:31:06>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:31:06> Pre Req MSXML60 found.
<05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:31:06> Pre Req Wimgapi found.
<05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:31:06>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Installing the SMSPXE
<05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:31:06> WDS Service is installed.
<05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}). Upgrading/Reinstalling SMSPXE
<05-18-2011 22:31:06> New SMSPXE is the same product code. This is a minor upgrade.
<05-18-2011 22:31:06> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:35:43> pxe.msi exited with return code: 0
<05-18-2011 22:35:43> Installation was successful.
<05-18-2011 23:41:19> ====================================================================
<05-18-2011 23:41:19> SMSPXE Setup Started....
<05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 23:41:19> Deinstalling the SMSPXE
<05-18-2011 23:41:19> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
<05-18-2011 23:41:33> Deinstallation was successful.
<05-18-2011 23:41:33> Removing PXE Registry.
<05-19-2011 00:38:50> ====================================================================
<05-19-2011 00:38:50> SMSPXE Setup Started....
<05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
<05-19-2011 00:38:50>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
<05-19-2011 00:38:50> Pre Req MSXML60 found.
<05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
<05-19-2011 00:38:50> Pre Req Wimgapi found.
<05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
<05-19-2011 00:38:50>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Installing the SMSPXE
<05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-19-2011 00:38:50> WDS Service is installed.
<05-19-2011 00:38:50> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-19-2011 00:38:50> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-19-2011 00:39:15> pxe.msi exited with return code: 0
<05-19-2011 00:39:15> Installation was successful.

I have similar issue same above error but this error i am getting intermittent keeping trying 2 or 3 times i get F12 option to boot the network services
TFTP
PXE-T01 The specified file not found
PXE-E3B TFTP Error : File not found
Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured SCCM2012 in VM environment
I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
SMSPxe log says no errors but getting client Pxe TFTP error file not found (Since its not looking Image throw out TFTP error)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
Set media certificate in transport
Set authenticator in transport
SMSPxe log says no errors t i can able to do pxe Log found Boot image
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
PXE::CBootImageManager::FindBootImage: SGP00004
Looking for bootImage SGP00004
PXE::CBootImageCache::FindImage
PXE::CBootImageInfo::UpdateAccessTime
Appreciate if you could provide some solution
Ksrini

Similar Messages

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

Some of the songs I have downloaded onto i tunes won't play when I select it to do so. The error message I get is "The song could not be used because the original file could not be found. Would you like to locate it?" How can I get my songs to play?

Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
              Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
             I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                  ThanQ SO very much!
                                                                         [email protected] or [email protected] or [email protected] .
                                                                                           You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                            that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
                                                                                            hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                            as marking this page in my FAVORITES so I can find it fast! Take Care!!!

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

What does this message mean: This song could not be used because the original file could not be found--When I try to play songs there is an "!" next to it.

A friend recenlty replaced my hard drive.
When I try to use itunes--I receive this message: "The song could not be used because the original could not be found, would you like to locate it? Next to my songs I see this: "!" Help--Please!!

Well what happened is the pathname to the song has changed slightly.
For instance if the song was located say c\:Windows\User\Mary\Music\iTunesFolder
and now it's c:\Windows\User\MaryXray\Music\iTunesFolder
I'm assuming here your music was replaced in the Music folder like on the old hard drive, that iTunesFolder was simply copied over in whole.
So to fix things, you go into the iTunes Folder in your Music Folder and look for a iTunes Music Library .XML file and open it in a Text Program that has "find and replace" ability.
You find the partial pathname of the old drive and you replace ALL instances of it with the new pathname.
so \Windows\User\Mary would be changed to
\Windows\User\MaryXray
Save the file and reopen iTunes.

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

RH11 404 - Page Not Found when linking to PDF file from search results using IE9 and IE10

I'm using RH11 (11.0.3.268) and I've included a number of PDF files as baggage files. The hyperlinks on the pages work fine and display the PDF files in a separate window, as expected. However, when searching for these same PDF files using the Search tab, I'm getting a 404 error with the filename. The description on the error shows the filename and says the "the requested resource is not available." This is occurring using IE9 and IE10. And, it only happens within the application, which packages the WebHelp with a war file.
I searched the forum and found where someone was having the same problem on Firefox, but was fine on IE. But, as mentioned, I'm finding it on IE.
Thoughts on how to fix this error?

Is the WAR file extracted at the point when the search is done? If not, I would expect it to fail.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error: file not found

Hello,
I am using a labview program which already exists. The program
inputs a file ( txt file with some numerical data) and gives the output
file at the required location after performing some calculations to it.
The problem is when I input my file path and run the program it always
gives an error ' file not found'. Please help me.
Thanks
Laxmikanth

Hi Laxmikanth,
Some more info would be helpful. Such as posting a image of your program, which version of labview, platform etc.
that being said if you are literally typing in the filepath that is the most likely source for the error. Is there a browse button visible to the right of the filepath control? If not try right clicking and under the visible menu make sure the browse button is selected. Then click on the browse button and find/select your disk file. Now run the program and see if you get the same error.
Cheers,
--Russ

Error : file not found in SharePoint 2010

I have a problem of error "file not found" in a site collection SharePoint 2010.
    I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
    I can access to the page of "all content"
    I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
    I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
    I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
How could I check the master page? Or this problem has other solution?
Thank you in advance.

You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
UPDATE - Can you configure the web.config to display the detailed error? Make -
<CustomErrors Mode="Off">, CallStack="true" and
<compilation debug="true" />
Do an IISReset and then refresh the site.

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"
I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page. It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following: "(file name) could not be used because the original file cannot be found. Would you like to locate it?" I click locate but do not know where to go from there? I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it. I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer. What to do??? Any help is much appreciated!!!

See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
tt2

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

PXE T01 file not found PXE E3B TFTP Error file not found error

Similar Messages

Maybe you are looking for