Q. Any command-line options for Digimarc and Elements 7 batch file processing?

Q. Any command-line options for Digimarc and Elements 7 batch file processing?

Are you a digimarc subscriber? You would be better off asking them, if so.

Similar Messages

  • Is there a command line option for VNC to automatically launch in fullscreen mode?

    I can launch a VNC window from the command line, as such:
    open vnc://username:password@hostname
    ... but I'd like it to automatically start in full screen mode. Is there a command line option for this?
    I'm using an old MacMini purely to connect to another Mac over screen sharing, but when the MacMini boots I'd like it to go straight into the fullscreen of the other desktop.
    Many thanks!

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

  • 'autorotate and center' command line option for acroread toPostscript

    Hello,
    Is there a command line option available for 'autorotate and center' (like in the graphical view of acroread) while you convert a pdf to postscript on command line?
    I must convert an A4 pdf to 'portrait' letter (fanfold). With the command below, everything is fine only the pdf is not rotated.
    My command looks like:
    acroread -toPostScript -size 792x612 -shrink -expand < pdffile.pdf
    Mvg,
    wim

    Hello,
    Our application generates A4 pdfs (reports) in portrait format. Now we have some matrix printers (Epson LQ680Pro) which are feeded with fanfold letter paper (11x8.5in - 792x612pix). The fanfold paper hangs on each other with the larges side (11in) - 90° rotated as by 'normal' paper.
    What we have to do, is rotate (90°) and scale (A4 to letter) our pdf before we can print it correclty.
    I've now fixed it with following commands (because acroread can't rotate, we use pdf90 to rotate our pdf first):
    pdf90 --outfile tmp.pdf report.pdf;
    acroread -toPostScript -size 792x612 -shrink -expand < tmp.pdf | lpr -P Epson_LQ680Pro -o Resolution=180dpi -o PageSize=FanLetter;
    note: the Fanletter papersize is a self-defined papersize in the pdd for the printer.
    Sincerely,
    Wim

  • File name as command line option for multiple VM processes

    "-Xloggc:/tmp/gc.log" is the option I'd like to set, but every process will log to that file and even if we don't experience any concurrency issues the data still isn't useful because I can't tell which process did what.
    The island files are cleverly named to include their process number, can I do similar for command line options or will I be restricted to a single JVM?

    Online help (as of LabVIEW 7.0?), Index, Command Line, User-defined arguments - It will show you the following:
    You also can pass LabVIEW-defined or user-defined arguments when you launch LabVIEW from the command line. To pass user-defined arguments in the command line, enter two hyphens (--) surrounded by spaces before the set of user-defined arguments. LabVIEW does not use any arguments after the two hyphens to launch labview.exe. LabVIEW passes the arguments after the two hyphens to the block diagram of the VI you launch. Use the Application:Command Line Arguments property to read the user-defined command-line arguments passed when LabVIEW launches.
    For example, to launch mycool.vi and pass user-defined arguments, use the following command:
    c:\labview\la
    bview.exe c:\coolapp\mycool.vi -- 1000 sine
    On the block diagram of the mycool.vi, use the Application:Command Line Arguments property to read the 1000 and sine arguments you passed and handle the values.
    Enjoy,
    Roy

  • Command line options for Safari

    I have a script that opens a Safari window by doing essentially the following:
    open -a safari http://www.apple.com
    According to the man page for open, I can add more args to this that would get picked up by Safari, as follows. Of course the man page for open can't indicate what such args might be or even if Safari pays any attention to them:
    open -a safari http://www.apple.com --args arg1 arg2 ...
    Are there any such args one can usefully pass to Safari in this way? Specifically, I'd like the command to be able to control the size of the window that is opened, perhaps as follows:
    open -a safari http://www.apple.com --args h=300 w=400
    Thanks.

    While I'm no Terminal expert, I believe you might be interested in using osascript. You can check its man page by entering *man osascript* at the Terminal prompt. Also, a Google search for osascript should yield some good returns.
    In short, entering *osascript -e* at the Terminal prompt, followed by a valid AppleScript command executes the script action. More than one argument can be used at a time by adding another -e, followed by a new AppleScript command.
    The example below causes Safari to open apple.com, with the window resized to your specifications. Copy the entire piece of code, paste it at the Terminal prompt, and press Return:
    *osascript -e 'tell application "Safari" to open location "http://www.apple.com"' -e 'tell application "Safari" to set bounds of front window to {10, 60, 400, 300}'*
    Good luck, hope this helps.

  • Is there any command line option, so that when I open firefox from command line it uses the already opened firefox, instead of creating a new firefox window.

    for example: this option is available with jedit editor.
    jedit
    above cmd always opens a new jedit instance.
    jedit -reuseview
    above cmd checks if there is a existing jedit instance if yes brings it to focus else opens up a new one.

    Start your '''Computer''' in safe mode with networking. Then start Firefox.
    After a bit, close it. Then open it a few minutes later.
    '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

  • Command line options / API Support to launch the sequence file

    does teststand support any command line options / API Support to launch the sequence file and also populate the test run status. I want to explore the option of integrating the teststand with QC where I can launch the sequence from QC and results are sent back to QC.
    Thanks in advance,
      -Dilip

    Hi Dilip,
    Here are the command line options for TestStand v4.2.1:
    Command Line Processing
    Command line usage:
       seqedit.exe [<sequence file>]
                   [/goto <location>]
                   [/run <sequence> <sequence file>]
                   [/runEntryPoint <entry point> <sequence file>]
                   [/quit]
                   [/setCurrentDir]
                   [/useExisting]              
                   [<workspace file>]
          <location>:  property object path to the item to display in the file
                   Location examples:
                         TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"Power On\"]"
                         TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"ID#:JifH4ODTf0y1z7bJ​ne0G7D\"]"
                         TestExec.exe c:\example.seq /goto "Seq[1].Main[4].TS.LoadOpt"
          <sequence file>:  sequence file to open
          <sequence>:       sequence to run
          <entry point>:    entry point, such as Single Pass or Test UUTs, to run
          <workspace file>: workspace file to open
       You may specify multiple sequence files, sequences, and entry points.
       Quotes are required for arguments that contain a space, such as
       "Test UUTs" and "C:\My Documents\Test Sequence.seq"
    I don't believe you'll get a return status of the executed sequence from the editor on close; but you could design your sequence to write the status to a file and then read that by your QC application.
    -Jack

  • Why can I not find "command line options" in FF help?

    I can't find any information in the knowledge base on windows command line options for Firefox. I actually had to go to "http://kb.mozillazine.org/Command_line_arguments" to find this information. This seems like a fairly common piece of information FF users would want to know. At least, it's not extraordinarily rare.

    You have out-of-date plugins with known security issues. You should update them.
    * Adobe Shockwave for Director Netscape plug-in, version 10.3
    * Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers (new security update releases 10-12-2010)
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
    #* Removing old versions: http://www.java.com/en/download/faq/remove_olderversions.xml
    #* After the installation, start Firefox and check your version again.

  • Compiling command line utilities for Linux with static libc

    Hi,
    The following command used to compile and link BerkeleyDB with both static libdb and static libc:
    make clean
    env LDFLAGS=-static ../dist/configure --disable-shared
    make
    Now the command only statically links libdb and not libc.
    [root@fedora8 ~]# ldd /usr/local/BerkeleyDB.5.3/bin/db_dump
    linux-gate.so.1 => (0x00110000)
    libpthread.so.0 => /lib/libpthread.so.0 (0x00c15000)
    libc.so.6 => /lib/libc.so.6 (0x00a88000)
    /lib/ld-linux.so.2 (0x00a69000)
    [root@fedora8 ~]#
    It appears that the link of the command line utilities has now been moved into "make install".
    Can anyone suggest how to also force a static link of libc?

    The command line utils are in /opt/novell/ncl/bin. There are man pages for
    them to describe how they work. If you run "ncl_man" it will list all the
    NCL man pages.
    >>> On 9/1/2006 at 8:42 AM, in message
    <[email protected]> , Joseph
    Marton<[email protected]> wrote:
    > Are there any command-line utilities for the 1.2 client? I'm thinking
    > what if my X gets hosed and I want to access my server. It'd be nice to
    > be able to still login and map drives. Granted there's always
    > samba/CIFS,
    > but if I have a working Novell Client installation and my X just fails
    > for
    > some reason it'd be nice to still utilize the Novell Client.
    >
    > Joe

  • What are the commands for compiling c++ using the command line tools for xcode?

    Hi, I am taking a class in school for c++ and i would like ot be able to practice at home i found the command line tools for xcode and went ahead and installed it on my computer. now i need to know the commands and procedure to be able to compile and run c++.

    c++ testfile.cc

  • Using Command Line Tool for Linux

    I have to use the command lines of Linux for SCM commands(like repcmd, set workarea, checkin etc...)
    should I have to install something?
    I have documentation for using the oracle repository command line Toll for Windows and Unix, but I didn't found anything about using the oracle repository command line Toll for Linux.

    JDeveloper runs excellent on Linux and is supposed to be able to use the repository, but that's a GUI...

  • JAVA command line options -cp and -jar don't work together?

    Running JSDK 1.4.2 under Windows. I have a Java application that tries to dynamically load a class name that the user enters as follows:
    try {
    classResult = java.lang.Class.forName(strFilterName);
    catch (ExceptionInInitializerError e) {
    strErrorMessage = "ExceptionInInitializerError loading class: " + strFilterName;
    catch (LinkageError e) {
    strErrorMessage = "LinkageError loading class: " + strFilterName;
    catch (ClassNotFoundException e) {
    strErrorMessage = "ClassNotFoundException loading class: " + strFilterName;
    This works fine if the classes that make up my application are left as class files in the classpath, but fails to work if they have been collected and run from a JAR file. Note: I can even dynamically load the class when running from the JAR file, if the class I'm trying to load is within that JAR file too. The problem really occurrs when the dynamically loaded class is located someplace else in my classpath. I've tried using various combinations of the "-cp" and "-jar" Java command line options - but when loading and running from a JAR file - the "-cp" parameters seem to be ignored. Is this a bug? Has anyone ever seen this before?
    I run my program from the JAR file using this command:
    java -cp .;e:\entmgr\filters -jar EntMgr.jar
    Where "e:\entmgr\filters" is where the class I'm trying to dynamically load is. (This class has no package name, but loads perfectly as long as I'm not running the application from the JAR file). The class name specified by the user has to be fully specified with a package name (if it has one).
    I have tried forcing the "java.lang.Class.forName(strFilterName);" call to use the system class loader, the parent of the system class loaded, and even the null bootstrap class loader - all with no success.
    I am suspecting that the class loader that is loading and running my main program from the JAR file, is just not paying any attention to the "-cp" parameter when the "-jar" parameter is present. Indeed, I have never seen any change in the failure, no matter what I put in the "-cp" parameter when using the JAR file.
    When I run this without using the JAR file, here is the command I execute:
    java -cp .;davidp\snmp;filters davidp.snmp.EntMgr
    Where this is executed in a directory that has a "filters" and "davidp\snmp" directory. In this case, because the "filters" directory is in my class path - I can dynamically load my class from it using just its simple name (i.e. "TestTrapFilter").
    So, is there some bug that precludes the "-cp" parameter from working correctly when the "-jar" parameter is used? Is there some other way to initialize or set up the classloader I'm using, so it can find things outside of the JAR file I'm running from? I would hope that it is possible to get the same behavior from my program, no matter if it is run from a JAR file or not.
    Thanks for any assistence!
    Dave

    These posts are pretty old, but this page came up in a google search while I was having the same problem, so I thought I would throw my own (Later found) solution in.
    The -cp and -jar options did not work together for me, but I later learned that they didn't really have to (and you don't have to mess with jar manifest files).
    While on the command line, if you want to set a specific class path and also run a jar, all you need to do is add the jar to whatever extra class path you need to use in the -cp <arg>, and then specify which class you want run from inside the jar.
    IE:
    java -cp <YourSpecialClasspath>: <PathToJar> <ClassToRunInsideOfJar>
    in my case it was like:
    java -cp /home/user/WebRCP.jar:./StandaloneInstaller.jar InstallLoader
    Remember to put a ":" in between the two arguments for the class path (-cp).
    Hope this helps someone in the future,
    -Josh

  • Flo – A command line app for organizing events, to-dos, and deadlines

    Example
    $ flo watch movie,d020
    Ids are updated.
    $ flo eat lunch,d11100-d11130
    Ids are updated.
    $ flo
    0 08-16 20:00 d0 watch movie
    1 08-17 11:00 d1 eat lunch
    11:30 d1
    Usage
    flo [-a] [-c id] [-f from] [-r id] [-t to] [-w what] [what[,from][-to]]
    Options
        -a all items
    -c id change item
    -f from from date
    -r id remove item
    -t to to date
    -w what
    When changing an item, setting -f or -t to r removes the field.
    Date formats
    YYYYMMDDhhmm, MMDDhhmm, DDhhmm, DDhh, and DD are the valid date
    formats. Replace DD with dn to set the date n days from today's date.
    If the year or the month isn't specified, the current year and month is used.
    For formats without a month, if the date specified is before today's date, the
    month is set to the next month.
    The value for hours and minutes is set to 00 if no other value is specified.
    flo runs fast since it's written in C, and the goal is to keep it as simple as possible. It uses between 1–2 milliseconds to start when it's cached by the OS.
    The package is named flo-git in AUR. The development happens on GitHub.
    Last edited by alexanderte (2010-08-22 10:50:05)

    alexanderte wrote:
    Installation
    git clone git://github.com/alexanderte/flo.git
    cd flo
    make
    cp flo /usr/local/bin/
    # optional
    echo "alias f='flo'" >> ~/.bashrc
    You should always use Pacman to install packages on Arch. Here's a PKGBUILD:
    # Contributor: Xyne
    pkgname=flo-git
    pkgver=1
    pkgrel=1
    pkgdesc="A command line app for organizing events, to-dos, and deadlines."
    arch=('i686' 'x86_64')
    url="http://github.com/alexanderte/flo"
    license=('ISC')
    makedepends=('git')
    provides=('flo')
    conflicts=('flo')
    _gitroot="git://github.com/alexanderte/flo.git"
    _gitname="flo"
    build() {
    cd "$srcdir"
    if [ -d "$_gitname" ] ; then
    cd "$_gitname" && git pull origin
    else
    git clone "$_gitroot" "$_gitname"
    cd "$_gitname"
    fi
    make
    install -Dm755 flo "${pkgdir}/usr/bin/flo"
    You can learn more about PKGBUILDs in the wiki: http://wiki.archlinux.org/index.php/PKGBUILD
    I recommend that you upload it to the AUR as well, with any changes that you deem necessary. Don't forget to add yourself as the maintainer at the top of the file.

  • File format for username/password file for -vcusersfile command line option

    In what format do I specify username and password in a file that I can use for
    the -vcusersfile command line option?

    The text file should contain name/password pairs separated by an equal sign. Example:
    myname1=password1
    myname2=password2
    Hope that helps,
    Susan Doan

  • I am from India using my iphone4 with Vodafone and  firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

    I am from India using my iphone4 with Vodafone and  firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

    I am from India using my iphone4 with Vodafone and  firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

Maybe you are looking for

  • How do I  change the header on subsequent pages

    I need to change the header on pages after the first page. How do I do this?

  • Java Error when opening WEBI from BI Launchpad?

    Hi I am working with colleagues on building a WEBI dashboard on the BI Launchpad. However, my colleagues are unable to access WEBI fully (view/edit reports) because the following error displays on their Internet Explorer web browser: "Cannot launch J

  • Performance using Generic Sync

    Hey Guys, i am facing a problem. Syncronization using MI installed on my laptop takes 3667 ms, but starting a sync from my pda takes 95425 seconds. it is only the time sm.synchronizeWithBackend(); needs until the inboundprocesshandler starts working.

  • How do I re-activate my apple id

    I had an unauthorized downlod for an app that charged me a significant amount of money. So I called and Apple reimbursed me the funds but disabled my apple id now I cannot re-activate my account. i have tried reseting my password several times and th

  • Presenting project in PDF with a lengthy gap

    Hello, I have created a Project, there was a lengthy gap where the project was on hold, as a result the project extends to 250 days. My question is how do I present this Project without the huge gap? Currently, when I export to PDF, there are many bl