Q:Clipping Masks

I have a background image, I made a selection from the background, on to a new layer by pressing Cmd+J.
I got a texture image
I made a clipping mask and the textured image doesn't go into the image I cut out it covers everything else but the clipping mask.
Help and confused. I'm missing a step Im sure or 2 steps...

Hi there Could you post a screenshot of your layers panel? This would allows us to give you more specialized help.
Make sure the texture layer is above the layer you want to apply a clipping mask to. I've outlined the steps below.
1. A you described, I've selected the area of my image that I want to apply a texture to, and copied it onto a new layer. In my case, I'm using the blank white wall.
2. Now you're going to want to add the texture to a new layer above the layer you want to apply the clipping mask to. In my case, since I'm applying the brick texture to the white wall, I've placed the brick layer above my wall layer.
3. To create a clipping mask, select your texture layer and go to Layer > Create Clipping Mask. Below you can see that the brick texture is now clipped to the wall area that I selected earlier. You can see that a little arrow icon has shown up next to the texture layer thumbnail in my Layers Panel.
If you are still having problems, feel free to post here again. If you could include a screenshot of your workspace and layers panel, that would be great
Cheers!
Kendall

Similar Messages

How to use a clipping mask layer to a multiple base layers?

Is it possible to use one layer as a clipping mask to a 5 different bottom layers.
What I'm trying to do is apply an adjustment layer to certain layers only. Is that possible?
-Zeropan

Zpan wrote:
Is it possible to use one layer as a clipping mask to a 5 different bottom layers.
not that I would know, but what you can do instead is group those 5 layers (CTRL+G), add the adjustment layer as the topmost layer in the group and set the group's blending mode to "normal". The adustment layer is then only applied to the layers within the same group.

How do I use clipping mask to cover unwanted background?

I'm practicing illustrator myself. I have a book for illustrator hoping it would show me step by step on how to use the masks to take away any unwanted background in a photo but it didn't do that. Can anyone teach me how or show me where to look for the information on how to use the clipping masks or other type of masks? I went to the adobe workshop video to look for the answer but it didn't show exactly as what i want to know. The image i'm practicing on is a family photo and i want to isolate everything to just one person in the photo so how can I do that using clipping mask? Thanks!!

oh~~~ so i still need to use pen tool to draw the shape out. I thought there's something i could use to make the shape easily. Stupid me XD
I was wondering if you could help me more...can you give me a rule of thumb like when is best to use illustrator to edit image or photoshop?
Thanks for your tip! I really appreciate it!!
=D
Sometimes the only way to stay sane is to go a little crazy. -
"Girl, Interrupted"
It is the journey itself which makes up your life. -
Tiresias, the blind prophet, "The Odyssey"
Date: Thu, 18 Feb 2010 02:00:41 -0700
From: [email protected]
To: [email protected]
Subject: How do I use clipping mask to cover unwanted background?
Draw the mask using the pen tool over the image. Select both the drawn mask AND image and choose Object > Clipping Mask > Make
>

I have a line (stroke, no fill) and an eps graphic. I'm trying to make a clipping mask of the single line art but all it does is cut the eps graphic instead of making a mask?

I have an eps graphic and a single line drawing 2 pt wt. I'm trying to make a clipping mask of the line drawing. When I tried it all that happened was the eps graphic was cut in half. I did the exact steps from AdobeTV except the line drawing [pink camera.ai*@1200% (CMYK/Outline)] is an ai pen line drawing instead of a vector graphic and the other is [vector flower lillies.eps @ 100% (RGB/Preview)]. If you need more info on the graphics please tell me where to find it and I will send it.
This is all because the eps graphic has a white background. I have tried everything I know including opening it in Photoshop and deleting the background and it always pastes with a white background. My thought was if I can't change the background then maybe I can make a clipping mask of the pink camera and just paste it in front.
Please help this has been a thorn in my side for too long...

please post a screen shot of the graphic(s) as it's hard to understand exactly what you are asking
IF these are 'vector' graphics there should be no need for a clipping mask--also--if the .eps files are small (MB or KB) try posting one of those

How to make a clipping mask in this particular case?

Okay, Just to begin I know how to make a clipping mask, but for the case that I'm going to present right now I just can't figure out what mistake I am doing (if any). However I am a beginner.
http://vector.tutsplus.com/tutorials/illustration/how-to-create-a-medieval-paper-scroll/
In the link to above tutorial on how to make a medieval scrol I'm stuck at step 25 and would be glad to anyone who helped.
As said in step 25 that expand the appearance of the scroll and select the two then clip the mask. In th above picture I have just selected the scroll to show how it looks.
Now as you can see in the image below I have expanded the appearance of the paper scroll. Then I selected the paper scrol and the yellowish green grunge background placed below it. And the moment I hit Ctrl+7 (in windows) or Command+7 (in Mac) to make a clipping mask the error that showed up has been highlighted.
One more thing, I have clipped masks before too in the same tutorial given above but I don't know what has gone wrong for me in this step.
Please help.
Signed,
Awais Rauf

Why would you want a clipping mask? I don’t see a reason for it.
However, for what you want I would use the Pathfinder panel to combine all the paths into one shape. First use the ungroup and release compound commands a few times each, to make sure you have nothing grouped. Then press the top left button in the Pathfinder p[panel. This should produce one closed path that just surrounds the scroll.

Does a Clipping Mask effect just one layer?

Hello everyone ... Level: Newbie OS: Win7 64bit Ia: Cs6
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
And/or is all the artwork from then on inside the mask?
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
So, then I went and found a lesson that contained the use of a Clipping Mask.
But I'm stuck... again.
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
So, I have been trying to abate my problem in lots of different ways.
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it becuase I am not getting behind the Mask?
(Let me apologise to those that HATE it when Newbies follow lessons/tuts and who HATE it when we come here to ask for help. I'm doing my best to learn and to find answers on my own before heading here for help)
Please lmk if you would be better able to help me with pictures of my layers and the art. Thanx so much for your time!!

Thanks as well for your patience with me! It can be difficult to communicate this way, but all we can do is try our best.
As for the issue regarding the author's "main shape"...
Here I have an object with a gradient mesh:
If you follow the directions in step 3 of the tutorial, the author creates a duplicate by going to Object > Path > Offset Path.
And then inputs "0" for the offset value.
I shifted my original gradient-meshed object down a little bit, and there you can see is the simple shape that you were seeing in the author's image. Then they just filled it with that gold gradient and scaled it down.
And as for clipping masks...
As I mentioned before, a clipping mask will only affect the objects and groups you had selected when you created it. For exhaustive information about clipping masks, see this link: http://helpx.adobe.com/illustrator/using/clipping-masks.html
I hope this was helpful! Good luck!

Cropping Images with Clipping Masks | Learn Illustrator CS6 | Adobe TV

In this video you will learn a quick and easy method for cropping images in Adobe Illustrator CS6 and CS5. Using clipping masks allows you to retain the area of the image you cropped out as well as modify the clipping path later on.
http://adobe.ly/V8tW7S

Is there a way to make a clipping mask for a many-layered image without collapsing all the layers? I'd love to keep my image as is (it's quite complex), I just want to crop the entire thing.
thanks!

Photoshop elements 6 help with making a clipping mask

I have a button template (for a pinback) I put into elements. What I would like to do is make a country flag button. Right now the flag image is sitting ontop of the template. I would like to make a clipping mask (I think that's what's it's called) so that the image covers the entire part of the button that will be seen when it is printed. Here is a link to a button. This is what I am trying to do, but am not having any luck. I would a appreciate a step by step guide. I am using photoshop elements 6 on a mac OSX (ver. 10.5.8
any help would be great
http://www.petergreenberg.com/wp-content/uploads/2008/11/canadian_flag.jpg

This is user to user tech support for folks having issues with Intel-based iMacs. This is not any kind of Adobe product support. If you need help with an Adobe product I suggest that you look for that help at the Adobe website.
Dah•veed

Problems with clipping mask, Photoshop CS6

I have been working with a clipping mask around a complex item. This included a large clipping mask around the edge of the item, along with sections inside this path that were also 'cut out'. I am not sure how, but I seem to have done something which is now stopping me from making the additional 'internal' paths. Instead of these areas being blocked by the clipping mask, they are appearing as paths drawn over the image and not as part of the clipping layer (yes, checked that I was working in the right layer). I have checked the 'outside' path and this is all connected - no gaps. I have tried to set up a new file and start again, but now can't seem to make the mask behave properly. Can anyone help?
thanks
FB

THanks for that, but to be honest I am a real novice - learning in pieces - so am not sure how to check path modes etc. ..Any suggestions??
Here's a screen grab of the work and current settings:
Message was edited by: fjb3012. When I try and cut out new sections one of two things happen - I lose the image completely OR the new path sits on top of the image, with no clipping.

I can't get clipping mask to work

I'm adding stars to the sky. I did this by making a custom brush and painting on a blank layer above my image layer. To make it look more realistic I want to add a bit of color. So I add a Hue/Saturation adjustment layer and colorize to get the desired hue. This is where I run into trouble. I only want the adjustment layer to affect the stars I painted on and not the rest of the image so I apply a clipping mask to the Hue/Saturation layer (which is directly above my stars layer.) When I do this the color disappears completely and does not affect any part of the image. Any ideas why this isn't working? I also had the same problem when I applied a Brightness/Contrast adjustment layer. I have Photoshop CC (same issue is present in both the 2014 and previous versions) for Mac.

This is my desired end effect. I worked around it by creating a layer mask from the stars layer but the clipping mask not working is still an issue.
I created new Hue/Saturation layers and put them above the stars layer. The adjustment layer changes the color of the entire image including the stars.
Once I clip the layers none of the image is affected, not even the stars, when it should be affecting only the stars.

Trouble with Clipping Masks

Hello!
I created a pattern in illustrator, and then I created an object, and I wanted to fill half of the object with the pattern, so I used a clipping mask to do this.. however, now when i try to group everything together, the clipping mask in released and the pattern spills all over the artbaord... when i try to copy and paste into a new document, everything is pasted as white instead. When i try to merge the layers, the clipping mask is released...
I'm not sure how to fix this and have been searching for a solution for it. I hope you can help me figure out how to keep the clipping mask from releasing..
Also, I tried rasterizing but that doesnt work either and it makes my shapes all rough and choppy!
Thank you

Thanks for replying but unfortunately that did not help!
I always select with the solid selection tool ^^ infact when i want to select everything i just use command+a.
Anyway, I'm still unable to group or copy the entire picture without the clipping mask releasing..

Is there a fix for the slow processing yet? Clipping mask slows down Illustrator CS4 to the point it can't be used

I've seen a few older posts regarding CS4's bug with applying a clipping mask to any image that is somewhat complex, but have yet to find an answer.
The problem is, any time a clipping mask is applied to a semi-complex shape, Illustrator CS4 slows almost to a halt. We're talking 10 minutes of the beach ball to apply the mask and then another few minutes to do anything else with the document. This is unacceptable. My system is loaded (Dual 1.8 GHz G5, 1.25 GB of memory). The exact same files process fine in CS3. Many of our other designers are running iMacs and cannot work on the files at all using CS4. There has to be an answer to this problem.
Prefs have been deleted, Document Raster Effects has been lowered. Any other suggestions?
Your help is greatly appreciated.

My system is loaded (Dual 1.8 GHz G5, 1.25 GB of memory).
Uhm.. that's "loaded"? That's like the slowest G5 made with almost the minimum amount of RAM.
But.. I agree with you. Clipping masks seems to drastically slow CS4 down. Even if an object isn't really complex, but included many objects. I'm running a much faster system than you are and I have to wait around 3 to 10 seconds after any operation for some files. It's annoying. So far, I've not found any solution other than to expand and clip the masks.

Some help required with Clipping Masks

Hi,
I'm quite new to illustrator - I've made designs before but really just playing at it.
Now, though, I have a design which I had "grunged" up by applying a texture and knocking out the sections of the design with it in Photoshop. However, I want to learn how to do that in illustrator and thought that clipping mask was the answer.
I can get the clipping mask to work except it creates the opposite effect I am after...It masks the portions of the image I want to keep visible leaving those areas I want masked visible.
In effect I need to inverse the mask but I don't know how to do it in illustrator.
Hopefully, I've made it clear what I mean and I appriciate any advice.
Ta
Malc

You can use the Transparency panel to make an opacity bask as well and inverse that.
Or if you wish use the pathfinder panel to minus front. I think the second icon on top from the left.
Read the help files about opacity masks, pathfinder and clipping mask
and it might also work as a compound path Command 8 or Control 8.
Read about compound paths

Illustrator - Pattern Swatch / Clipping mask issue

I'm currently working in Illustrator CS6. I'm creating pattern swatches and have successfully created 20 - but 4 are giving me the following issue.
When I drag the perfect swatch tile into swatches it appears as so instead of the perfect tile:
"New pattern swatch 3" has a white space on the right. Which sometimes when I create the swatch takes up half of the 'swatch.'
When I go to create a shape and apply the pattern, I am left with an empty box.
When I double click to adjust the pattern I get this dialog box:
When I go to adjust the bounding box, to see where my pattern is - this crazy mess happens:
Further investigation and deleting items to see whats happening:
Bits of my pattern appear, but not sure why the other bars are there.
I'm having this issue with four very different patterns. But I have also succesfully created more complicated ones. Not sure why this is happening.
Any help is greatly appreciated!

Hey everyone,
I am in the same version, same file. I have also tried starting from scratch in another file just to make sure. Same issue.
I have templates of what i want my patterns to be, so I have tried to make the patterns both ways. Starting from my original art - expanding all shapes and making them so they will tile perfectly.
1. with clipping mask. 2. released mask, and expanded shape. 3. perfect tile.
from scratch, made to tile perfectly.
Same issue for both:
To make sure it wasn't only this one I tried a different pattern that was giving me the same error before hand.
I tried with original art which didn't work, so I quickly recreated with squares. Same tile, one time it was empty producing same issue as above. And second time it did this:
1. What tile is supposed to look like 2. Tile applied to shape - but the pattern swatch icon is empty?
Maybe this is a program bug?

Clipping Mask not working

Okay, so I am EXTREMELY new to this (I started about an hour ago!) I am trying to make a clipping mask with the mask being the outline of France and the image inside the French flag. Here are the steps I've taken so far:
File>New
Open>Silhouette of France (photo)
Image trace as silhouette>Expand.
Drag in to new file.
Open>French flag (photo)
Drag in to new file and put in separate layer to the silhouette.
Place the silhouette on top of the French flag, select all, make clipping mask.
Then everything goes white!! I can still see the outline, paths etc. of the silhouette but I just don't understand what I'm doing wrong! If someone could explain it to me in layman's terms that would be amazing because I really don't know what I'm doing!
I'll include the pictures I am using and the end result I keep getting...

SoBo,
The France parts seem to be a Group rather than a Compound Path. It would be better if you could expand the Layer(s) completely, also expanding the Group.
As I said, an Opacity Mask may be more forgiving, and work with a Group.
I took the France parts to have no stroke and a white fill, if not, you may give it one (or a black fill), then (the Invert Mask suggested in post #2 was based on a black fill, sorry):
1) Select the two parts of France and Object>Group or Object>Compound Mask>Make;
2) Select all and in the Appearance palette flyout click Make Opacity Mask with Clip ticked and Invert Mask unticked (ticked if the fill is black).
From the OP:
Drag in to new file and put in separate layer to the silhouette.
To have it in the same layer, just have one Layer and File>Place the flag image into it, then the France image, and take it from there.

How do I crop an image with a Clipping Mask using a circle instead of a rectangle?

I watched Adobe TV Illustrator's tutorial about cropping images with a clipping mask. In the video, the presenter uses the rectangle tool with the clipping mask, and makes a reference that the circle or vector shape could be used, but I cannot figure out how to get the circle.
http://tv.adobe.com/watch/learn-illustrator-cs6/cropping-images-with-clipping-masks/
I'm new to Illustrator and need step by step instructions!
Thanks!

Christine,
As Larry said, and as I said in the first post:
For a Clipping Mask, you just create a path, in this case a circle, and place it on top of the image, then select both and Object>Clipping Mask>Make.
You can see the shortcut when you use the dropdown; it is Ctrl+7 for Windows.
At least in the old days, you could also use Alt/Option+O+M+M (easy to remember, Object>Mask>Make).
It is easy to skip/overlook the exact steps.

Q:Clipping Masks

Similar Messages

Maybe you are looking for