Qaaws not refreshing query triggered from Xcelsius, maybe a cache problem

Hi,
I'm having a problem with QAAWS and Xcelsius
I'm using a List Builder component to select multiple values in this case STATES from the efashion universe
I use the selected states as values to feed a prompt in a QAAWS query, the qwaas query has  the SALES REVENUE as the resultset and in the conditions it has a multi prompt for STATES
When I preview my dashboard, I select the States, then UPDATE the values and then refresh the query with a CONNECTION REFRESH button, The first time I do this it works fine and returns the Sales revenue.
If I add a new State to my selection and then run update and run run again the query with the refresh button, it doesn't work any more and it shows again the value retrieved from the first query
First I thought that the query wasn't triggered by Xcelsius, but by doing some more tests I found that actually the query runs but it returns the value from the first query
I think this is a cache problem , so is there a way to tell QAAWS to always run the query and not use the cache?
thanks,
Alejandro

Hello Alejandro,
QaaWS indeed uses a cache mechanism to speed up some Xcelsius interactions (from XI 3.0 onwards), but your issue should not be induced by this, as cache sessions are discriminated according to session user id & prompt values, so if you are correctly passing prompt values, QaaWS should not serve you with the previous values by error.
Could you specify how you are passing several prompt values to the QaaWS? There might be an issue there, so make sure that:
1. QaaWS query prompt is set using In List operator, otherwise only first value will actually be taken into account,
2. In Xcelsius Designer Data Manager, web service input paremeters are duplicated to accept several input values (you cannot submit you list of prompt values as a list to a single input parameter).
If this still does not work, I'd suggest you debug your dashboard runtime using an HTTP sniffer like Fiddler (available from http://www.fiddler2.com/) which enable you to inspect the sent & recieved HTTP messages with the server, where you should verify which prompt values are sent to the QaaWS servlet.
FYI, you can set the QaaWS cache lifetime for each query, by going into QaaWS edition first wizard screen, click Advanced... button and change value for timeout parameter (default is 60 seconds)
Hope that helps,
David.

Similar Messages

  • HT201365 Downloaded iOS7 on my 4S. Mostly went well, but sometimes screens lock up (especially text, but also Settings). Find I cannot access and send texts sometimes, plus do not receive some texts from others (group messages real problem).

    Downloaded iOS7 on my 4S. Mostly went well, but sometimes screens lock up (especially text, but also Settings). Find I cannot access and send texts sometimes, plus do not receive some texts from others (group messages real problem). Any work around? And related problem: Getting told can not connect to network when trying to sign on with Apple ID to launch Facetime and Messages.

    I've restarted several times. If I restore from backup, unfortunately the backup was done after iOS7 downloaded. Now, am I wrong that "restore as new" will essentially wipe me out? If so, and having backup, you're saying essentially start over and then backup?

  • Matrialized view not refreshing all records from source.

    My materialized view is not refreshing a fixed number of rows i.e 198 every time from source to target.What are the reasons for such behavior. Also what should i do to resolve this discrepancy.
    My mv is a FAST REFRESH ON DEMAND based on ROWID.
    It has a simple sql query select col1,col2,col3 from testschema.mytable@mydb;
    Thanks,
    Sandesh

    Hello Raman & KV,
    Thanks for your Suggestions.
    Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
    So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
    Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
    Cheers
    Shiva

  • Visio Diagram is not refreshing the data from list

    Hi,
    I made a pivot diagram in visio 2013 and linked it with SharePoint 2013 list. I configured the Visio services, uploaded it document library. I can view the diagram in browser but it is not automatically refreshing not even by pressing the "Refresh"
    button.
    Instead i have to open it in visio, refresh the diagram manually and the save it in SP document library to refresh the diagram.
    I am using visio web access to view the diagram and also the auto-refresh is enable. 

    Hi Rizwan,
    Following url's might help you.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/79476e70-51cf-412a-aac9-ebb10e82572f/2010-visio-services-data-refresh-issue
    http://social.technet.microsoft.com/Forums/en-US/06d53cb3-2593-4dd0-a524-356bd9720231/visio-service-data-refresh-help
    Regards  Roy Joyson
    Please remember to mark your question as "answered"/"Vote helpful" if this solves/helps your problem.
    Roy Joyson

  • Detail region does not refresh when selecting from a drop-down list in master region

    I am using DW CS3 and have updated to version 1.6.1 of Spry.  Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic.  It works fine in this format (clicking on a row displays the correct graphic).  However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list.  Listed below is the code produced when I used the insert Spry Repeat List.  I got the same results when adding a spry:setrow="dsChartNurse".  I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
    When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
    <div spry:region="dsChartNurse">
           <select name="select" spry:repeatchildren="dsChartNurse">
             <option value="{name}">{name}</option>
           </select>
    </div>
    <div id="image" spry:detailregion="dsChartNurse">
       <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
    </div>
    Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

    Thanks for the quick reply.  I did solve the problem I was having by changing from onclick to onchange in the master region.  But, now I have another problem with, of course, IE.  I just put in online at http://www.minursemap.org/ageDistNurse.html.  When opened in IE, the drop down list displays the last entry, but the image is for the first in the list.  Thanks again for your help.

  • ERP Delivery not created when triggered from TM

    Hello Experts,
    I have a OTR & Freight Order created in TM successfully. Could also assign a carrier to it. From the Freight order Management screen when the Send Delivery proposals to ERP, the system sends a XML message that is successful in TM. But in ERP there are no deliveries created. I could not see any error in the Queues or the XML messaged.
    My observation is there is no XML message in ERP system for the delivery creation.
    Could anyone throw some light on why the deliveries are not created?
    Regards,
    Vasu

    Thanks Marcelo,
    I missed to check the PI system, the message was stuck there since the mapping was missing in PI.
    Regards,
    Vasu

  • Safari does not load frames triggered from within other frames?

    I am a new to Safari and I like the browser very much. I have run into a nasty problem though, that I was unaware of earlier on when using other browsers.
    Some time ago, I made a website that makes extensive use of frames. The index page is actually a frameset page that loads information into the main frame. Through a basic JavaScript in this main frame, additional information is loaded into other frames on the frameset page. Whenever the user hits a link in the main frame, the JavaScript updates the other frames.
    This has always worked fine in Netscape, Firefox, Internet Explorer and Opera, both on the Mac and Windows platforms. BUT not in Safari.
    Can anybody help me out? What am I doing wrong that Safari refuses to execute what other browsers seem to accept as normal?
    I removed the actual site temporarily, as I don’t want to block off Safari users. Yet I created a very basic mini-site that may explain the problem. This mini-site can be accessed at:
    thttp://www.chem.kuleuven.be/safety/grrrrh/start.html
    Try it out with any of the mentioned browsers and then with Safari and you will see what I mean. To access the code, use one of the other browsers and download the frameset page completely. All 5 documents are truly basic and therefor very short. They only show the principle, no whistles, no bells.
    If this kind of question would not belong to this forum, can anyone point me to one that deals with this type of problems?
    Tx fpr helping me out.
    PowermacG5   Mac OS X (10.4.4)   Safari 2.0.3

    Dear Tom & Andy,
    thanks for taking the time to look into my problem.
    I didn't know Safari is really picky on code, so will remember that for the future. Tx for the suggestion, Tom.
    But things are getting even weirder!
    First of all to set things straight, I am on the same versions of Safari and Firefox as the both of you and tested the minisite in Netscape 7 & 8, IE 5 (Mac) & 6 (Wintel) and Opera 8. As I stated eearlier, none of these have trouble reading and interpreting the "messy" code in www......start.html. Only Safari had.
    But when I access my minisite now via the Internet, Safari renders all frames OK. I can see grey, yellow and pink frames with text, as it should be. So now I see what you see also, Tom. The previous problem, as you obviouslyencountered also, Andy, has mysteriously disappeared. Strange.
    Adding insult to injury, when I download all five files from the minisite (start.html, main.htm, nav.htm, banner.htm & Frames.js) and put these in a folder on my local disk, the problem resurfaces again when I click start.html.
    Adding a DOCTYPE statement to the start.html file on my hard disk does not help either.
    Firefox and the other browsers mentioned still do a perfect job rendering the framepage from the downloaded content irrespective of whether the DOCTYPE statement is present or not. Only Safari refuses.
    The only difference I can see between the www....start.html filee and the one from my hard disk is the way I access them: via http or straight by double-clicking.
    I am still (and even more) puzzled.

  • Triggers from sybase to oracle giving problem-------urgent please

    all the Triggers are got converted to AFTER INSERT/UPDATE/DELETE TRIGGERS IN migration workbench...and almost all are been checking the existence of records in the table ie.,primary key check (existence of record) which if i turn them to BEFORE INSERT is becoming a MUTATING ERROR.
    and one more thing the "count(*) from inserted" in sybase equivalent is not there in oracle how to solve this problem?????
    if (select count(*) from attr_val av, inserted i
              where av.class_cd = i.class_cd
              and av.attr_cd = i.attr_cd
              and av.attr_val = i.attr_val) >
              ( select count(*) from inserted )
    for (select count(*) from inserted) is getting converted to select count(*) from dual
    Thanks in advance,
    srinivas.

    all the Triggers are got converted to AFTER INSERT/UPDATE/DELETE TRIGGERS IN migration workbench...and almost all are been checking the existence of records in the table ie.,primary key check (existence of record) which if i turn them to BEFORE INSERT is becoming a MUTATING ERROR.
    and one more thing the "count(*) from inserted" in sybase equivalent is not there in oracle how to solve this problem?????
    if (select count(*) from attr_val av, inserted i
              where av.class_cd = i.class_cd
              and av.attr_cd = i.attr_cd
              and av.attr_val = i.attr_val) >
              ( select count(*) from inserted )
    for (select count(*) from inserted) is getting converted to select count(*) from dual
    Thanks in advance,
    srinivas.

  • Update/insert/delete data from xcelsius to Database via web service

    Hi,
    I need to create dashboard that go function can <b>update/insert/delete</b> data send to <u>Database</u> thru <u>web services</u>, as i know got 2 xcelsius add-on software which support those of function <b>InfoBurst</b> and <b>flynet </b>
    <b>InfoBurst</b>
    http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
    <b>flynet </b>
    http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
    Except this 2 purchase add-on xcelsius, any other solution ?  
    Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc  ?
    *note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
    thanks,
    regards
    s1
    Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

    Hi,
    As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
    Solution:
    Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
    In Xcelsius add Web Service connection and user above web service.
    Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
    We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
    Note:
    Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
    Hope this helps!
    Thank you.
    Regards,
    Vinay Mhaske

  • Standard iView not refreshing

    Has anyone come across this problem with the Org Unit Overview iview ?
    This i View is not showing updates unless I log off and then log back on to the Portal. The iView is set so there should be no caching (eg the cache level is NONE,  Allow Client -side caching is set to NO) 
    Going out of the transaction in the Portal and then back to the Org Overview is not enough even if the Explorer history and temp internet files are cleared.
    I'd appreciate any suggestions

    Hi Stefhen,
    I hope that you are again displaying the data from the same context. When you are updating the data, (update it first) commit your changes to back end then re query the data from back-end to get the updated one. Otherwise if you are going to display then it will show you the old data because you are not refreshing the data from back end.
    do check the process and try.
    Cheers....
    Satya

  • Cannot refresh a stored procedure within a Crystal Report from Xcelsius

    Please help...Xcelsius 2008 & Live Office problem...
    What I am trying to do is to refresh a stored procedure that is within a Crystal report from within my Xcelsius dashboard in Preview mode. The data returned appears on the Xcelsius dashboard. It works fine in Design mode, just not in Preview or when published as a swf.
    1. I set up a Crystal Report using a Stored Procedure as the data provider.
    2. The Stored Procedure has a parameter built into it.
    3. When the report is refreshed within Crystal, the prompt dialog box is displayed; I fill in the desired value, and run. Everything comes back fine.
    4. Crystal Report is exported to the repository.
    5. In Excel, I inserted the Crystal Report using Live Office. It shows up as a Live Office object just fine.
    6. I bound an Excel cell to the prompt; when you change the value in the bound cell, the Live Office object refreshes and displays the correct results.
    7. In Xcelsius, I imported the Excel spreadsheet.
    8. I set up a Text component that is bound to the cell containing the parameter value. Also set up a Grid to display the results, and a Connection Refresh button to call the refresh. Added a Live Office Data Connection pointing to the Web Service URL for the report.
    Note: When in Designer mode, if the value of the bound cell is changed, the results in the grid change accordingly.
    9. When in Preview mode (or generated swf), if the Refresh button is pressed, a "User Identification" dialog box appears asking me to log on. The values it asks for are: System, User Name, Password, and Authentication. I enter the same credentials as are within the Live Office settings in Excel, (which are working correctly), but receive an error "soapenv:Server.generalException: Database logon failed.".
    Note - all the id's are synced up - Business Objects, Database, etc.
    I've tried all kinds of combinations, but nothing gets me past this error. If I use any other server than the one listed under System in Live Office, the error message is "soapenv:Server.generalException: Server XXXXX not found or server may be down".
    I've noticed that in Excel directly, when I open the spreadsheet and refresh the Live Office object, I am prompted to log on to the database where the stored procedure is being executed. This dialog box does not appear once the Excel sheet has been imported into Xcelsius. One of the combinations I tried in the "User Identification" dialog box was the name of the database server, that didn't work either.
    I also tried creating the Live Office object directly within the Excel spreadsheet in Xcelsius, but then I was unable to bind the prompt value. Could never get the Live Office/Properties menu to appear.
    Ideas? Thoughts?
    Thanks in advance!
    Stephanie

    This post looks like a duplicate of: Live Office: Database logon failed error

  • Deleting the Row from the table is not refreshing the contents in the form

    Hi,
    We developed a table and form in the same UI based on the following suggestion.
    Display and edit currently selected row of ADF Table in ADF Form
    1. Created one view object based on the employees table.
    2. dragged the view object to the UI as table.
    3. dragged the view object as form.
    4. set partial triggers on the form's container (panelformlayout) as tableId.
    Tested the application with the edit options and everything is working fine. But the problem comes when we delete the record from table. it is not refreshing the form based on the newly selected row after deleting the record. If we commit the data the form contents are updated to the selected row (which is not desired).
    Can you please suggest how to fix the issue, refreshing the form with the selected row after deleting the records.
    Thanks and Regards,
    S R Prasad

    The Code snippet looks fine. I think, the issue is in the partial trigger setting
    4. set partial triggers on the form's container (panelformlayout) as tableId.In order to the table to get refreshed, the table's partialTriggers property should be set to id of the delete Button.
    Go to table, select partialTriggers in the Property Inspector, Click on Expression Builder at the right and select the delete Button.
    Can you set this and check?
    Sample Code:
    <af:panelHeader text="panelHeader 1" id="ph1">
    <f:facet name="context"/>
    <f:facet name="menuBar"/>
    <f:facet name="toolbar">
    <af:commandButton text="Delete" id="cb1"/>
    </f:facet>
    <f:facet name="legend"/>
    <f:facet name="info">
    <af:table var="row" rowBandingInterval="0" id="t1"
    partialTriggers="::cb1">
    <af:column sortable="false" headerText="col1" id="c1">
    <af:outputText value="#{row.col1}" id="ot1"/>
    </af:column>
    <af:column sortable="false" headerText="col2" id="c4">
    <af:outputText value="#{row.col2}" id="ot3"/>
    </af:column>
    <af:column sortable="false" headerText="col3" id="c3">
    <af:outputText value="#{row.col3}" id="ot4"/>
    </af:column>
    <af:column sortable="false" headerText="col4" id="c5">
    <af:outputText value="#{row.col4}" id="ot2"/>
    </af:column>
    <af:column sortable="false" headerText="col5" id="c2">
    <af:outputText value="#{row.col5}" id="ot5"/>
    </af:column>
    </af:table>
    </f:facet>
    </af:panelHeader>
    Thanks,
    Navaneeth

  • Swing problem: table is not refreshed when i open it  from jdialog

    Hi , my situation is this one :
    1. i have a swing form.
    2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed.
    3. i invoke this panel into the form with drag and drop, with invoke jDialog from button option.
    4. First time i run the form and open the panel from button the drop down list and the table are working correctly.
    5. i close the panel and open it again: And at this time when i choose an item from drop down list the table is not refreshed anymore. I have to run the form again if i want that this panel to work correctly.
    Am i doing smth wrong? I dont have too much experience in swing , and the documentation for adf-swign are really poor .
    Ps: Maybe i should explain the way i have created the drop down list and table in the panel . i am not using smth like execute with parameters for the view in the table. I have created a link between the view in the drop down list and the view in the table. It seems they work correcly if i run the panel for the first time.
    Thanks in advance !

    To answer your question, Restore the iPhone with current iTunes on your computer. If fixed, it was software. If still problem, most likely hardware, and then make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

  • Calling a webi query from xcelsius dashboard

    Hi Experts,
    I have created an xcelsius dashboard with a URL link to a detailed webi report.  I'm using open document to launch the webi query and with 1 parameter value to pass over from xcelsius to webi.
    The URL is http<server:8080/OpenDocument/opendoc/openDocument.jsp?mode=full&appKind=InfoView&isApplication=true&nbPrompts=1&sIDType=CUID&sRefresh=Y&iDocID=AbgeiGFRMSlGtxcmjJeCRJM&appKind=InfoView&service=%2FOpenDocumentls%lsSProject=$A2. 
    Cell $A2 contains the value of the project selected by the dashboard user.
    This URL does call the correct webi query but the webi query still prompts for the project.  The 'Project' prompt in my webi report is set as optional and I have ticked the 'Refresh on open' check-box before saving the webi query.
    How and what else do I need to do to by-pass the webi prompt for project?
    Please let me know.
    Thanks very much,
    Anthony

    Hi
    Place the url in one cell and your passing prompt in another cell.concatenate both the cells and pass that to your url button.
    eg:
    in cell I6: http://sever:8080/OpenDocument/opendoc/openDocument.jsp?sType=wid&iDocID=AaHo4EFB5rhPplDJTrHLM6o&sIDType=CUID&lsSPlant=
    in cell D5: 1002
    in cell I7: concatenate(I6,D5)
    Pass this cell to your Url button.
    Regards,
    Peri.

  • Central Contract Mngt: Contract Confirmation Out not triggering from ECC

    Hi,
    Can some one take a look at this and let me know if you have any suggestions
    After following note 1268821 we have Contracts replicating from SRM to ECC via PI. However we are not getting the Contract Replication Confirmation Out triggering from ECC to SRM   The configuration in PI is waiting to receive PurchasingContractSRMReplicationConfirmation_Out from ECC for delivery to PurchasingContractSRMReplicationConfirmation_In in SRM.
    Does anyone know what we maybe missing, perhaps a setting in ECC that will trigger the Confirmation Out to SRM?
    Any help much appreciated.
    Che

    Just an update.
    It turns out that ECC is generating message PurchasingContractERPConfirmation_Out which is contrary to what we are expecting PurchasingContractSRMReplicationConfirmation_Out.
    Have logged it with SAP support for now.

Maybe you are looking for