QE71 -F4 Values for user defined fields in inspection points
Hi,
I have used QAPP_CUST_IP_F4 function module to list F4 values in Inspection points and QAPP_CUST_IP_CHECK for validation of those user fields.
When configured for an inspection point, these modules are working fine when we use in QA32 and QE51n. But when we use QE71, the FM's does not getting called.
Is there any configuration needed to make them work in QE71?
Regards,
Sriram
Same kind of issue we have faced in one of my implementation ie when we used to do the RR through QA32 system allows us to show the F4 which is assigned for that inspection point. But same F4 help was not working during rr through QE71.
For this issue we haven't applied any note by debugging in QE71 fixing call function he done some changes in the assigned FM
after that its appered in QE71 100% it will flow in QE71 also without NOTE.
Check with abaper
Link: QE71 - verifiying user fields and providing lists of values
Similar Messages
-
Batch Input for user defined fields (SRM 4.0)
Hello.
Now in my project,we are developping Batch Input function about PO,CONF in SRM 4.0.
and in this time, we will use over 20 user defined fields.so we have to enter the value to user defined fields by using Batch Input function.
But if we will enter over the 10 value for user defined fields,we have to scroll the screen.
How do I scroll in SRM?(What's the command to scroll in SRM)
Regards
Ogiwarabetter lock the user since he may some business documnt open and you can not proceed further.
br
muthu -
DI_Inability to enter value in user defined field: Hour
I am using SAP Business One 2007 A PL15, and I seem to be experiencing the same issue described in these two support notes:
1086704 [DI_Inability to enter value in user defined field: Hour|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=0001086704]
1016731 [DI_Inability to enter value to Hour User Defined Field|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=0001016731]
However, they are for SAP 2005 and say that the issue should be fixed.
Does anyone have any insight into whether these issues have been fixed in a more recent patch of SAP 2007?
Thank you in advance.
MikeDear Mike,
By check the Related Notes, the issue in SAP Note 1086704 is fixed on SAP Business One 2005 A SP01 Patch 32 and the issue in SAP Note 1016731 is fixed on SAP Business One 2005 A SP01 Patch 29.
If your issue is same as the Notes then it should be fixed in a more recent patch of SAP 2007.
Best Regards
Jane Jing
SAP Business One Forums team -
Badi: for user defined fields in Budget Entry Document
HI,
I am implmenting BADI for user defined field in budget entry document definatin name 'FMBW_CUSTOMER' . I have created two fields in include 'CI_FMBH' and also created a sub screen and assign this subscreen to badi. I have called get data and put data methods in PBO and PAI. like this.
<b>
PBO
create object grid1.
CALL METHOD grid1->if_ex_fmbw_customer~get_data_from_screen
importing doc_header = doc_header.</b>
<b>PAI
CALL METHOD grid1->if_ex_fmbw_customer~put_data_to_screen
EXPORTING
doc_header = doc_header
processing_mode = 'CRE'.</b>
But the system is not saving these fields in database.
What could be the problem .Hi, did you have any advance on this issue?
-
Error: property is not set correctly for User Defined Fields.
Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
satHi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat -
DMS :Select Range for User defined fields in Classification Tab in CV04N
Dear All,
We have added User Define Fields Date field in Classification Tab in CV04N Transaction But it has single search (parameter) where we need to have Date range selection (Like Select Option) for the documents.
I request you to suggest me some solution whether it is possible to achieve with any standard configuration as it is very critical to the Business .
I would appreciate for your quick response and support.
Thanks in Advance,
Regards,
Vishal.Dear Ravindra,
Actually My requirement is when we enter the exact date in the input field its giving the documents submitted on that date.But when i give date range its not displaying the any documents where the document submited in between those two dates.
Ex: I have submitted the document ( in CV01N ) for the approval on 10.05.2010(this is the same field in classification).
In the CV04N transaction ,classification tab if I enter date as 10.05.2010 its giving the document submitted on that date.but if I enter the two dates 01.05.2010 and 20.05.2010 where document is been created B/W the input dates.
Please suggest how to fulfill my business requirement ,I also request to check any configuration for the user defined fields can solve this problem instead of selecting single value when it can select the range of values.
Thanks for your earlier reply.
Regards,
Vishal. -
Assigning of g/l account for user defined field
IN the sales invoice i am creating the user difined field
for manual tax( i.e manual tax the customer how much tax amount he will give that much amount he will feed in that field )in the row level and i want to assign the g/l account for that user defined field
please explian what is the procedure
Edited by: Philip Eller on May 23, 2008 10:11 AMHi,
Do you want the G/L account input automatically or manually ? if manually try to use this query FMS:
SELECT T0.[AcctCode], T0.[AcctName] FROM OACT T0
In the UDF, just press shift+F2 and select the account code you want to input.
Rgds, -
Retreve current form value in user define field
Hi,
I got a questions, please help.
I want to retrieve values in current form, like the quantity and discount in Sales order, into a user define field with formatted search, is it possible?
Many Thanks!
PaddyThis is the Syntax of FOrmatted Search Query. This syntax will work only with SBO.
$[$38.11.0]
38 Represents the Matrix(Table) in a Marketing Document
11 Represents the Quantity Field in the Matrix
0 Represents the Number Format.
Place your Cursor on the Matrix and Press CTL + SHFT + D, you'll find the Column information in the Left side of the Status Bar -
Drop box for User defined field
Hi,
I need to add some customer field with PO basic data .
I have added in PO basic data as per 672960 .
Can anybody let me know how can I place Drop box to this field .
Thanks,
SSHi
<u>As everybody told earlier, you first need to create Data Element using SE11 Transaction.
Then a new custom domain element using same SE11 Transaction.
For this domain, you need to maintain fixed values under the value range tab
say you maintain 2 values
X -> Selected
' ' -> Not selected
Then the user-defined in the shopping cart will provide you drop-down list and will not allow you manaully enter anything else than the fixed range values maintained at the domain level.</u>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Documentation for user defined field
Hai gurus,
parameters : x type i.
i want create documentation for this field x in selection screen.
please replay meHello Ankal ,
parameters: p_docu type zdoc.
create a Data element ZDOC follow normal procedure to ceate a Data element .
when u press create -> it asks for domain and other attributes , in the same screen , click
DOCUMENTATION ( CTRL F7 ) --> editor opens , type the description or the document you want and then activate it .
then go to report and execute it , on selection screen you get p_docu and one input field ,
in that press F1 and you will get the documentation that you mentioned for that Data Element.
Regards,
Aby.
Please clsoe this thread as soon as your problem is solved. -
Values for user defined charactericts COPA
Hi,
I have creatd some client specific characteristics in my configuration, How can i assign vallues to those characteristics?
Regards
AshishHi
Use Derivation rules for deriving Characteristic values. (KEDR). You can also manually input values vide KES1
Jayaram -
Getting wrong values in User Defined Fields
Hi Experts,
I am facing strange error while developing addon, my scenario is like below
1. Created .srf form which has 3 text box, 3rd text box does calculation(Subtraction) of other two.
2. For example 1st textbox has value 5000 and 2nd text box has 1000 but the value showing in 3rd textbox is 4999.
3. while debugging the code , values are coming properly in to variable. but after assigning it to the textbox values are not rite.
IMP NOTE:
Same code is working fine in one machine (windows server 2008r,64-bit) but not working in other machine(windows server 2008r,64-bit)
same problem has been faced in windows 8 system also.
It would be very helpfull if anybody tells what might be the problem.
ThanksHi Parvatha,
Thanks for reply also sorry for confusion., here i made some changes in code and getting same error
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_LOST_FOCUS And pVal.ItemUID = "matItems" Then
oEdit1 = oForm.Items.Item("txtToWt").Specific
oMatrix = oForm.Items.Item("matItems").Specific
Dim sum As Double = 0.0
For k As Integer = 1 To oMatrix.VisualRowCount
oEdit = oMatrix.Columns.Item("colBndwt").Cells.Item(k).Specific
Dim qt As Double = oEdit.Value
sum = sum + qt // Here getting right value
oEdit1.Value = sum // Not showing right value
Next
End If
NOTE: I've checked same source in 2 different machines it is working fine (earlier code also). only i am getting error in specific machine in client place.
if any issue with operating system? or any settings?
thanks
M G -
User defined fields in Routing
Hi to all,
this is regarding user defined fields,
I want to enter Tear down time, But already 6 values are there.
so i created Tear down as user defined field. and i assigned Tear down formula also. (sap_14*operative qty/Base qty),
sap_14 is the user defined field.
but there is no change in tear down time in Production order operation details.
Please Give details to link user defined fields to formulasHi
You can assign additional formula parameters to the quantity fields in the field key in IMG, with the help of formula parameters you can use the value of the quantity fields in work center formulas.
In formula parameters for work center (OP17) you should have select origin as '4' user defined field from operation for user defined field
Regards
Dev -
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks, -
Assign category of user defined field to different user
hi to all on forum,
please help me to find the solution of this query
i had created several UDF and set them in different category as setting is there for user defined field. now i am getting different different user defined field in different category ,
now i want to set this different category of user defined field to different user .can we do it in SAP B1
like category---- general , cat1, cat2,
user --- Ram , Vipul
i want to assign cat 1 to ram and and cat 2 to Vipul so that with the document ram will see only UDF of cat1 and Vipul will see UDF of Cat 2.
hope for response
with best regards
vikasVikas,
You can do it for each user by assigning a category
to each of user defined field by setting visible tick mark.
Tools>User Defined Fields>Settings
Jeyakanthan
Maybe you are looking for
-
How can I purge old supposedly deleted data in iCal?
I normally keep my Powerbook in sleep mode with iCal running and everything behaves normall except for the usual slowness at times. However if for any reason iCal has to be closed down on restart it always restores data going back as far as May 2006
-
How can I drag multiple photos into a new iPhoto library from search box?
I lost but found my list of photos that were in my iPhoto library. I am unable to drag more than one photo at a time from the search box into the new iPhoto library box. Am I doing something wrong or do I have to drag one at a time? (That would take
-
How can I add music to a slideshow in Muse?
Is there any plug in I can use for background music in my slideshow or for my whole web-page to switch on and off? As easy as possible? Thanks for any help.
-
I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.
-
Hi members, i have a big problem with my ipad. I not able to read the sim, the device tel me: SIM NOT INSTALLED. I have reformatted my ipad with itunes but non change nothing. Can you help me? Thanks!