QM info record not applicable

Hi expert
I have active QM Info Record In all the plant.
Now scenario is like that.
If am procuring material for R & D purpose the system should not ask for QM info record and time of migo the material should directly goes to unrestricted.
Regard
Nabil

Hi,
You have maintained the QM proc. active and inspection setup in material master so that system will ask the info record and generate the inspection lot.
It is not controled through PO doc. type.
You can remove the inspection type from inspection setup and avoid creating inspection lot for the material at plant level but you can not remove the QM proc. it is at client level.
Regards,
Manish Jain

Similar Messages

  • Info record not updated from PO , PO updated from Info record

    Dear Gurus,
    I want to restrict Base price in PO will be copied from Valid info record. User does not permitted to change the Base price once info record not maintained.
    Kindly tell me the configuration steps to adopt the process ?
    I don't want to update infor record from PO also.
    I know while making PO i can untick infor record not update, but that is user specific.
    Thanks in advance
    With regards
    SD

    Dear Sidi,
    Thanks . Problem solved.
    When info record is maintained the price condition will get from there. for this change in condition type P001 , set "D" in  manual entries column.
    When info record is not maintained, then the system will try to get the price from last PO, if not present, it  will throw an error u201CNet price must be greater than 0u201D and sets price condition PBXX (manual entry) to manually enter the price you want.
    What you can do:
    Is make the condition type P000 as automatic only (option D as below) and also same for condition type PBXX.
    Regards
    Soumen

  • Purchase Info Record not found in Purchasing Organization 1000

    Hi all,
    While doing MIGO, Goods issue to cost center from consignment stock (201 k )
    i'm getting this error.
    "Purchase Info Record not found in Purchasing Organization 1000"
    i'm practising with standard company 1000.
    i have checked the all assignments.
    i.e., purch. org ->company code and
          purch. org-> plant.
          company code -> plant.
    Please guide me.
    regards,
    anand.

    Hi,
    Go and maintain Pur. Org 1000 against ur plant in :
    SPRO-Enterprise Structure-Assignments--MM-Assign Std Pur. Org for plant
    and please confirm that you have maintained the inforecord in Pur Org 1000 only and that too of Consignment type.
    Hope this helps
    Regards
    Dheeraj

  • Error :Purchasing info record not found in purchasing organisation

    Hi,
    after invoice verification with T.Code MIRO,
    Goods issue for consumption: with T.Code MB1A
    it display error message: purchaseing info record not found in purchasing organisation, pls tell me steps to correct it.
    thanks in advance
    ramesh.

    Dear Azis,
             Double Click on the serial no of the Component you will get the  inforecord fieldin the Purchasing tab. But this is only for Stock Materials.
    Please recheck again your components.
    Regards,
    Shareeq
    Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 13, 2009 2:42 PM

  • Info Record Note

    HI,
    can someone tell me from which table i will be able to extact Info Record Note.
    i looked at the technical information of the field in transaction me13 but it shows RM06I-LTEX1, but this is a structure  .

    Here is a sample ...
    report zrich_0001.
    data: xid like thead-tdid value 'AT'.
    data: xname like thead-tdname.
    data: xobject like thead-tdobject value 'EINA'.
    data: begin of itxttab occurs 0.
            include structure tline.
    data: end of itxttab.
    parameters: p_infnr type eina-infnr.
    xname = p_infnr.
    call function 'READ_TEXT'
         exporting
              client                  = sy-mandt
              id                      = xid
              language                = sy-langu
              name                    = xname
              object                  = xobject
         tables
              lines                   = itxttab
         exceptions
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              others                  = 8.
    loop at itxttab.
      write:/ itxttab-tdline.
    endloop.
    Regards,
    Rich Heilman

  • User status profile in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    Hi,
    The problem is due to missing authorization object :B_USERSTAT".
    Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
    Thanks
    SUMIT.

  • User status in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 -    V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    closed

  • Status profile in Q-info record not updating on UD

    HI All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    any clue??
    Regards,

  • Info Record Not Appearing for all materials in classic scenario.

    HI ALL, 
                I am working on Classic Scenario and all the follow-on documents are getting created properly. But the problem is With SOS. Currently i am able to view the info record for only one of my material, I am also referring backend contracts through vendor list. The contracts are visible in SOS.
               Can somebody pls put a light as to why for other materials the info records is not displayed in SOS, is there a report which has to be run to get the info record into SRM from ECC. If not then how does the system bring these contracts and info record from ECC to SRM.
              I am working on SRM 5.0 and ECC 5.0.
    THANKS AND REGARDS
    Debu

    Hi
    Please read this as well.
    <u>You have created sources of supply. These could be:
    -> Contract items in Enterprise Buyer
    -> Vendor-specific prices
    For this, you have created Product Linkages in the SRM System with vendor-specific prices via the SAP Menu Master Data -> Products -> Process Products.
    -> Entries in the vendor list of Enterprise Buyer
    In Customizing you have assigned product categories to which the system is to automatically group requirements and you have scheduled report BP_SC_TRANSFER_GROUPED to run periodically.
    For more information, see the Supplier Relationship Management Implementation Guide (IMG): SRM Server -> Sourcing ->  Define Interactive Sourcing for Product Categories.</u>
    Sourcing is completely integrated with the global availability check in SAP APO and executes a vendor search. You can activate third-party order processing in the check instructions by choosing how you want the system to start sourcing and which sourcing method you want to use for it. There are two different options here:
    &#9675;     If you want the products to be delivered exclusively by external vendors, the system performs sourcing directly at the external vendors without evaluating internal locations. For this, SAP APO requires corresponding purchasing records, delivery plans and contracts that are transferred from SAP ECC.
    &#9675;     If you only want to have products delivered by external vendors occasionally, that is to say, if you are unable to deliver the product from your own warehouse stock, choose an ATP profile in which both internal and external vendors are evaluated. In this case, the external vendor is treated like an internal location in SAP APO, and is integrated into location determination in the rule-based availability check.
    You can also choose the vendor manually. If you have already specified a vendor as the source of supply in SAP CRM, SAP SCM does not carry out any further sourcing. In this case, SAP SCM merely checks the validity of this vendor and confirms the requirement in its full amount if the vendor is valid.
    For more information, see SAP Library for SAP SCM at SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Advanced Availability Check Methods -> Third-Party Order Processing in the Global ATP -> Sourcing in Third-Party Order Processing.
    <u>Refer these links for more details -></u>
    <u>Assignment of Existing Sources of Supply</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/25/40f23a53cd0e04e10000000a11402f/content.htm</b>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/55/4af548688211d4977e0004ac962ee6/frameset.htm
    http://help.sap.com/saphelp_crm50/helpdata/en/fa/84944279c0c66ae10000000a155106/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/63/36f2323326da4da25d9d0a06f550a0/frameset.htm</b>
    <u>Processing Contracts</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/43/0f234a9e242a8be10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/5a/4cc5376848616ae10000009b38f889/frameset.htm</b>
    <u>See also</u><b>SAP Note 519794 EBP: Replication of Materials exclusively for Purchasing
    SAP Note 505030 (Restrictions for the integration of external requirements).</b>
    Regards
    - Atul

  • Price from Pur Info record not picking up

    Hi All,
    We have a requirement to pick Price from Purchasing Info record for Standard Cost estimate (CK11N/CK40N).
    The purchase info record has been created and price maintained in both u201CNet Priceu201D and u201CEffective Priceu201D fields in info record.
    I have selected Strategy L Price from Purchasing Info record and maintained sub-strategies 3, 4 and 5 in Valuation variant:
    Strategy 3 u2013 Net Quotation Price
    Strategy 4 u2013 Gross Quotation Price
    Strategy 5 u2013 Effective Price from Quotation
    Though I maintained the above, system is not picking up price from info record in CK11N.
    Am I missing anything on this?
    Any help is appreciated.
    Thanks.
    Regards,
    Sree

    Sreechakravarty,
    Per your description, system picked up the price other than the Purchase Info Record price, right? If so, you can try to remove other pricing priorities while only leave the pricing priority "L", and then run CK11N again to see whether system can find the info record, otherwise system will give error message such like "can not find material price in plant code &1/batch &2".
    If the system do can not find the purchase info record, you should check anything wrongly maintained to the info record such like valid period. Make sure the valuation date you entered during CK11N should be within the valid period of the info record.

  • Consignment PO - Info record not found

    Hi Experts,
    I have an urgent issue to resolve.
    A consignment PO was created on 30.01.2004. Still there are open items for that PO(as on date). Info records were removed from PO line items (automatically, the reason not known to anybody from business). The materials present in the PO have a source list and they are MRP relevant.
    Now being MRP relevant, these kind of POs are causing problem to the planning department.
    When i tried to delete/block the PO line items using ME22N, i get ERROR msg "Consignment info record does not exist". The consignment info records are there but with validity periods starting from 15.07.2004. I extended the validity from dates to 01.01.2004. When i returned to PO in ME22N, i am still having the problem with deleting the line items of PO.So i am not able to close these kind of POs which were created in the past but still open.
    Please anybody who has some idea about this kind of scenario, please let me know.
    Points will be rewarded to solution providers.
    Thanks & Regards,
    Pratap reddy M.

    Hi,
    Check the Validity period in the Consignment Info record, when is the to date.
    While closing the PO the info record should be active on the date, as the validity may be causing the problem to your PO,
    So extend the new validity period for that Consignment info record till the PO deletion.
    rgds
    Chidanand

  • Tax Code from ECC Contract or Info Record not picking in SRM7.0 SC

    Hi Experts,
    We are configuring SRM7.0 with ECC6 (Ehp4) having Classic Scenario.
    In SRM Tax setting, we set as u201CTax calculation in backend systemu201D, we created and mapped Tax code with ECC and it is working fine.
    In our case, Tax Rate varies as per Mat. Code & Country, irrelevant to Supplier.
    Tax code will be maintained in the ECC Contract /Info Record & we are going to use it as a SoS.
    However, while creating Shopping Cart, we must have to assign the Tax code at item level. If users makes any mistake and enter the different tax code, system does not validate it and create the classic PO with this tax code, which is different than maintained in ECC Contract /Info Record, which will be totally wrong and will create mess !
    In tax code Config setting, we have option to default the Tax code, but it is on Country and Product Category basis  .
    Can someone confirm /suggest me , whether anyhow  can we pull the Tax code from the selected SoS i.e. ECC Contract /Info Record, by using some BADi?
    Thanks
    NAP

    Hi Experts ,
    Any news on this please ?
    Regards
    NAP

  • Info Record not updating

    All,
    I have created a info record with net price 200 .
    Then I have created a PO for net price 350 .
    I have ticked the ' info update ' .
    But while going to the info record again the net price is not update .
    1. Why it is like this ?
    2. Also tax code I put in the PO which was blank in the info record .
        Tax code is not coming in the same info record , please explain ?
    regards

    Hi Sandeep,
    There are two types of info records,
    one with basic information, no prices etc. but with a PO history (and price history) attached
    the other is the full infor record maintained manually in ME11 and 12.
    The update info record flag on the PO ONLY updates the first type of info record, it does not affect the price etc., this can be added and maintained but only manually via ME11 or ME12.
    So the title of the flag is misleading.
    It works OK if you have the system set up to suggest the last price paid, but if you want to use FULL info records then all it is doing is recording the PO price history against the basic info record.
    Steve B

  • APO CIF issue - Purchase Info Record not getting CIFed from R/3 to APO

    Dear All,
                We are unable to CIF Purchase Info Record from SAP R/3 to APO. Are there any special setting that needs to be done for the same. We have created an Integration Model and using tcodes CFM1/CFM2 but without any success. Can anybody throw some light on this issue?
    Thanks in advance
    Ehsan Ahmed

    Ehsaan
    Can you check the SLG1 logs in R/3 and APO sides for further clues? Try to confine the time range to the exact time of activation of Purch INfo record model.
    Maybe you have already done this check. Can you go to the Purchasing tab of Material Master and see if the Source List checkbox is unchecked ? Do you have any special procurement keys defined by any chance ?
    Regards
    Srinivas

  • Info records not active?

    Hello all,
    The buyer created a PO and the price was different from the OA. InfoUpdate was both set to C for contract and PO. The InfoRecord (P.Org.1 data - condition) was created with the PO price. Not sure if this is supposed to behave. And the PO number was included in P.Org.2 data.
    Then she created another PO, the price is supposed to come from the PIR, however, it is from the contract (OA).
    Looks like the PIR is not active.
    I searched the forum and found if we haven't manually maintained the price in P.Org.1 data - condition, the price is supposed to be 0.00. and the next PO price will come from the PO in P.Org.2 data of PIR.
    Anything wrong?
    Thanks a lot
    YM

    >
    YM wrote:
    >  Our process is:
    > 1. Maintain a contract with price A, and set InfoUpdate indicator;
    > 2. Cut a C-release from the contract with a price B and set InfoUpdate indicator;
    > 3. Later, cut a new PO (C-release), but the system suggests price A instead of B.
    >
    > My question is: is the process normal?
    > Can you tell me which price should be taken when second PO was placed, A (from the contract) or B (from PIR)?
    >
    > Thanks
    > YM
    Hello, there is nothing wrong.
    It depends on how you create a PO:
    If you cut a PO from a contract, then the price will come from the contract. (Price A)
    If you create a PO (not C-release) with MMR + Vendor, then the price will come from the PO included in PIR.
    in both cases, PIR number will be shown up on the PO item, however, only the price of second case comes from the PO included in PIR. (Could be price C) However, in second case, if you manually maintained a price in PIR, this price will be defaulted when you create a PO with MMR+Vendor. (Price B)
    Hope these help.
    JasonM.

Maybe you are looking for


HashFlare