QM inspection type number 10

Dear All,
I am doing the whole production scenario...I have produced the finished product.....Now I want to sell that product with a inspection done before delivery.....I am using Inspeciton type 10...but I am able to do Post Goods Issue without any inspection to that material.....
Please suggest what all setting should I maintain to run this scenario?
Please Suggest...
Regards,
Pawan Shetty

Dear Sir,
It is Batch Management process I have created:-
1) Production Order
2) Did the confirmation
3) As the Backflush is on stock is directly moved to quality.....
In Material Master I have maintained 04 and 10 with post to inspection stock ticked....I also have one more question...
4) Now i am Creating sale order and then doing delivery and saving it....According to my knowledge after delivery is saved the stock should move to quality or get stuck up as it does for 03....But neither of the thing is happening instead I am able to do PGI....Please suggest
I also have one more question...
1) If i tick post to inspection stock and maintain only 10 or 03 in the material master the stock after GR is going to quality...and then i have no option to bring it out to unrestricted ....Please suggest where I am going wrong...
Thanks for your support Sir
Regards,
Pawan Shetty
Pawan Shetty

Similar Messages

Flash CS5 [Inspectable type="Number"] wont work

Hi!
I am expecting problems while creating components.
I've defined property
[Inspectable(type="Number", defaultValue="12")]
public function get size():*{
     return isNaN(Number(this._format.size)) ? 0 : Number(this._format.size);
public function set size(value:*):void{
     trace('VALUE:', value);
     this._format.size = value;
Flash will convert any user defined value to 0.
But if I'll change type to String
[Inspectable(type="String", defaultValue="12")]
public function get size():*{
     return isNaN(Number(this._format.size)) ? 0 : Number(this._format.size);
public function set size(value:*):void{
     trace('VALUE:', value);
     this._format.size = value;
Expected value will be passed. How to fix Number type?

I've disabled update feature, looks like this is my problem. Just updated and problem fixed now.

Inspection type 01 - inspection lot creation based on vendor batch number

Hi Guys,
this topic has been discussed several times here, but I was not able to find a suitable answer for my question.
I am facing the folowing requirement:
I have activated inspection type 01 for a raw material.
I am receiving a firs goods receipt from vendor A with vendor batch number 0001.
The system creates its own goods receipt batch number 0546 based on internal numbering.
A new inspection lot is created.
I am posting a second goods receipt from vendor a with vendor batch 0001.
The system creates a new batch number 0547 based on internal numbering.
A new inspection lot is created.
I do not want to get the second inspection lot, because I received vendor batch 0001 before and I am assuming it has been inspected or is in inspection.
Option 1: Post the second goods receipt against the first internal batch number created.
I am aware of this need at the moment, but a user is not always checking if there is an internal batch with the same vendor received before.
Can I customize the system to create inspection lots based on the fact that the vendor batch number was received before?
Or do I have to use an exit and some ABAP code to get the wanted result?
Thanks for your advice in advance.

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

Inspection Type 05 require input purchase order number for rejection

Hi Experts,
I have inspection and needed to reject in QA12.
When inputting the stock posting quantity to return, it prompts the reason for rejection, and required to input purchase order number also.
Since that is material return from production(inspection type 05) with no purchase order number, where in SPRO I can check the setting of this and disable this?
Please kindly advise, thanks!
Regards,
Daniel

Hi SujitSND,
I have some materials in inspection lot which is created from material return in production.
This lot is rejected by QA and needed to return to production line.
When inputting the qualtity field RETURN DELIVERY, system forced me to input Purchase Order number which is not available.
My target is to not needing to input purchase order.
Regards,
Daniel

How to configure inspection type with serial number

Dear all..,
Please guide me how can i proceed serial number congifuration for inspection types. & is there any procedure to active seperately to have control in serial numbers.
if, any setting need to be done please guide me with procedure.
Thanks,
Kiru.S

hi,
Active Serial number in SPRO- Qaulity anagement- Quality Inspection- Inspection type and Default values of inspection type.
than goto IQ01 for serial number and than assign it with material .
Regards

In-process inspection in repetitive mfg- Inspection type - 13

Hi there,
Can any one please tell me what is the differrence between the inspection type -03 & 13.
As per my understanding the only diff is that 03 is used in discrete mfg & 13 in repetitive mfg...
what is the other differrence ........??
Regrads
Kaushik

Hello Kaushik,
actually you have already found out that 03 is for descrete and 13 for repetive manufacturing. What is the difference?
03 Descrete Manufacturing : Limited production numbers and can be assigned to a customer order. Example: A computer built with various extras (built to order).
Accordingly inspection plans and inspection points assigned can be configured rather freely.
13 Repetitive Manufacturing: Production lines produce the same product in an unlimited number over a longer period of time. Example: Screws M8 x 40 mm (Mass production). In this case inspection plans need a relation to either time, numbers etc.
I hope that this information answers your question.
Regards
Isabelle

Inspection lot with inspection type 03 - Using Inspection plan

Dear friends,
I want to create an inspection lot at the time of production order release (ideally - insp type 03). But I want to use inspection plan as a task list instead of routing for that lot.
Is it possible?
Best Regards,
Avinash

Hi Swapnali,
Was expecting this re-question.
We are at a stage where system is already ready. The routing master data contains large number of alternatives and huge number of parallel sequences. We were looking for a solution in which we would make an inspection plan without touching routing master data. Second I want to create the lot at the time of order release (basically one lot per production order) so don't want to use insp type 04.
In config, I assigned task list type Q in front of lot origin 03 (Maintain Inspection Lot Origins and Assign Inspection Types).
But still system is picking the routing and not inspection plan. Is there a way out?
Regards,
Avinash

Inspection lot number ranges skipping

My inspection lot number ranges are skipping, those are std number ranges like 01 origin, 04 origin etc, what could be the reason for that.
Inspn lots are getting generated and I took UD also. But certain numbers in the range got skipped.
Eg:- Incoming inspn lot 010000000041 then it comes 010000000045
Lot numbers 01/42, 01/43, 01/44 does not exist in sytem.
Please suggest a way out
Thanks
Vineeth
Edited by: vineeth varghese on Jul 18, 2008 11:31 AM

Craig,
But expert suggestion says, not to switch off buffer thru SNRO as it may affect fuctionality as you said early in this discussion.
But I believe, this is to be relooked by SAP as number range skipping is not good (My case its skipping 5-7 numbers at a time). But I am not convinced with the reply from SAP also.
Anyway thanks to you craig for your advice.
SAP Note on this matter for reference of all. Thanks
================================
Note: 62077
Summary
Symptom
Gaps (jumps) occur when allocating internal numbers.
The status of the number range interval does not match the number that was last assigned.
The number assignment does not reflect the insert sequence.
IMPORTANT: Read Notes 504875 and 678501.
Other terms
Document number, number range, number range object, buffering, current number level, trip number assignment, number interval, CO document, CO actual posting, inspection lot, material document, physical inventory document, production order number, planned order number, process order number, maintenance order number
FB01, VF01, KO88, KE21, KE11, FD01, FK01, XK01, XDN1, MB01, MB0A, MB11, MB1A, MB1B, MB1C, MB31, KANK, KB11, KB13, KB14, KB41, KB43, KB44, KB21, KB23, KB24, KB31, KB33, KB34, KB51, KB53, KB54, PR01, PR02, PR03, PR04, PR05, XD01, VD01, MK01, SNUM, SM56, SNRO, VL01, VL02, CO01, CO40, CO41, VA01, MR1M, MIRO
Reason and Prerequisites
A large number of number range objects are buffered. When the system buffers a number range object, it does not update numbers individually in the database but reserves a preset group of numbers (depending on the number range object) in the database the first time a number is requested, and makes these numbers available to the application server in question. The following numbers can then be taken directly from the application server buffer. New numbers are not used in the database until the application server buffer has been used up.
The effects described under "Symptom" are a direct consequence of this:
If an application server is shut down, the numbers that are left in the buffer (that is, that are not yet assigned) are lost. As a result, there are gaps in the number assignment.
The status of the number range interval reflects the next free number that has not yet been transferred to an application server for intermediate buffering. The current number level therefore does not display the number of the "next" object.
The current number level (for each server) can be displayed using Transaction SM56. Call transaction SM56 and choose the menu 'Goto' -> 'Entries'. In the dialog box, enter the client, the affected number range object (for example, RK_BELEG) and possibly the required subobject (corresponds to the controlling area for the object RK_BELEG).
If you use several application servers, the numerical sequence will not reflect the (chronological) insert sequence because the numbers are buffered separately on the individual hosts.
Buffering the number range objects has a positive effect on performance, because the system no longer has to access the database (number range table NRIV) for each posting. Furthermore, a serialization of this table (database locking) is prevented to a large extent so that posting procedures can be carried out in parallel.
Solution
Since number range buffering does not cause any expressly assured qualities to be lost, no correction is required.
If you still require continuous allocation, you can deactivate the number range buffering specifically for individual objects.
Proceed as follows:
- Start Transaction SNRO and enter the affected object.
- Choose 'Change'.
- Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
- If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
- Save the changes.
Please note that this change is a modification. The modification is overwritten as soon as the affected number range object is redelivered - in other words, you must check the change manually each time you import a release.
In particular, read Note 678501, bearing in mind that changing the buffering type - if not explicitly recommended by SAP - constitutes a modification. For other possible solutions, refer to the following notes:
179224, 599157 and 840901.
For the the following number range objects, gaps may cause users to have doubts since they are 'expecting' a sequential numbering:
Area CO:
- RK_BELEG   (CO Document)
CAUTION: Note that the problems described in Notes 20965 and 29030 may occur if you deactivate buffering.
- COPA_IST (Document number in actual posting)
- COPA_PLAN (Document number in planned posting)
- COPA_OBJ   (Profitability segment number)
Area FI:
- DEBITOR    (Customer master data)
- KREDITOR   (Vendor master data)
Area HR:
- RP_REINR (Trip numbers)
Area PM, PP, PS
- AUFTRAG    (Order number, production, process, maintenance order, network number)
- QMEL_NR    (Number range - message)
Area MM:
- MATBELEG   (Material documents)
- MATERIALNR (Material master)
Area QM:
- QLOSE      (Inspection lots in QM)
- QMEL_NR    (Number range - message)
- QMERK      (Confirmation number)
- QMERKMALE (Master inspection characteristics in QSS)
- QMERKRUECK (Confirmation number of an inspection characteristic in QM results processing)
- QMETHODEN (Inspection methods in QM)
- ROUTING_Q (Number ranges for inspection plans)
- QCONTROLCH (Quality control chart)
Area Workflow:
- EDIDOC     (IDocs)
Number range buffering can be activated or deactivated at any time.
Number range objects that have to be continuous due to legal specifications (for example, RF_BELEG, RV_BELEG), or due to a corresponding application logic must not be buffered using the buffering type 'Main memory buffering'. See also Notes 37844 (for RF_BELEG) and 23835 (for RV_BELEG).
Header Data
Release Status: Released for Customer
Released on: 10.07.2007 12:57:00
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-SRV-NUM Number Range Management
Secondary Components: CA-GTF General Application Functions
BC-SRV-ASF-UOM Unit Management
CO Controlling
CO-OM-CCA Cost Center Accounting
CO-OM-CCA-A Master Data
CO-PA Profitability Analysis
FI Financial Accounting
FI-AP Accounts Payable
FI-AR Accounts Receivable
FI-GL General Ledger Accounting
FI-TV Business Trip Management
LO-MD-MM Material Master
MM Materials Management
MM-IM Inventory Management
MM-IM-PI Physical Inventory
PM Plant Maintenance
PP Production Planning and Control
QM Quality Management
QM-PT Quality Planning
QM-QN Quality Notifications
Edited by: viny on Jul 23, 2008 9:18 AM

GR line item proportional to Inspection Lot Number

Hi,
I would like to know if its possible to have the GR line item proportional to QM Inpection lot.
For example, I have 10 line item in a PO that need to be GR, is it possible to have 10 different inspection lot number for this? or is it only 1.
Thanks again,
Raymond

Hi
Yes this is possible by QM view >enter Inspection type 01> Control InsLot: For Each material document Item.
This will create a Inspection lot for each line item in GR.Also in MIGO you can select line wise material document creation(seperate GR).
Regards
Sujit

Inspection type 01 and physical samples

Dears
I have scenario like this
My raw material is avtivated inspection type 01 and 15 (For physical sample)
as GR done inspection lost was created of 01 type and it was workin fine
now when ever vendor delivery a new item with a slight changes for existing material (So material number will not change)
So as GR done inspection lot was created, But for this inspection lot i need system treat as a physical sample (normaly creating by using QPR1)
to achive this what are the things i need to do
Pls tell me the details step with process
Pls give your in put
hope my question was cleared
Thanks
Faisal

sir,
actually i am try to do something for sample approval process
my scenario is
when ever vendor deliver any sample we need to recored it and keep a database with all inspection details
some times vendor will deliver the sample in po with zero value
so can you pls tell me how i can map this scenario
Faisal

Inspection Lot number on Process Order

Hi Experts,
There's an Inspection Lot field in process order in Assignment Tab, but it doesnt reflect the number of the Inspection Lot of the Material. What am i missing?
Thanks,
Kumar

hi kumar
that inspection lot no is assigned to process order when you have maintained inspection type 03 ie inprocess check in material master . when you release process order you can see inspection lot is generated and that inpsection lot no you can on that field.
Regards
Pravin

Multiple notification against single inspection lot (03 inspection type)

Dear friends
While recording the defects multiple times against single inspection lot (03type) , all the defects are added in single notification, but my client requirement is they want different notification. if any body knows please tell me.
Note : in inspection type there is a option of multiple notification against single inspection lot, but this is
not working (i think it will work only serial number,equipment and functional location get changed)
Please do the needful
Regards

Hi Karthikeyan
As you mentioned it is not possible to create notification other than based on the object types.
A work out can be make an action box in the notification for creating another notification with the help of ABAP ( call transaction QM01) and while doing this the entire datas of the inspection lot gets copied into the notification. you may have to use a user exit also.
Defect can be recorded in the item level by the user.
Sounds difficult but certainly possible
Regards
gajesh

In-Process Inspection material having inspection type 04

Dear Sir/Mam
My question.In-Process Inspection material having inspection type 04.As we accept the inspection lot we put the stock into unrestricted.But when we have to reject we convert that stock into new material or if rework to be carried out,the criteria is stock should be quality,than production people cancel the confirmation and rework is carried out through trigger point.So my concern can we put the stock in block and in background whole production order is cancelled.
Thanks
kunal

Dear Kunal
This is the process i have defined for rework. let me know your feedback
1.Reject the material in QA32 to block stock
2.Reverse faulty material using Tcode MB1A u2013 262 movement type against the production order
3.if you need to scrap highly faulty materials use Tcode MB1A u2013 551 movement type against a cost centre
4.Create a rework order using Tcode Co01 order type (PP03)
5.Enter the Parent production order number in the goods receipt tab in Co01. (inbound delivery)
6.Issue goods against the rework order using MIGO
7.confirm the rework order through co11n
8.Move the material back from block to quality using Tcode MB1B u2013 349 movement type (activate 08 inspection)
9.Inspection lot created
10.Do the posting accordingly
Regards
Gajesh

Filter by inspection type the result of BAPI_INSPLOT_GETLIST

Dear all,
I have an MII transaction that is used to select the list of SAP QM inspection lots for a specific material, plant and period of time. Later on other transactions are reporting the inspection results of the selected inspection lots.
I have the problem now that i should filter this list of inspection lots through the inspection type for selecting specific ones. Do you know if i can filter directly through this BAPI, or i should use a different one?
I'm using MII 11.5 and SAP ERP 6.0.
Thanks in advance for the help

Hello,
I don't think we can filter by Inspection Lot Type in BAPI_INSPLOT_GETLIST,
I would try below options,
Option 1:
You can filter via BAPI_INSPLOT_GETDETAIL that is First pass the Insp Lot number to Detail retrieve the Details and then go for filtering as suggested by SOM
Option2:
Use "RFC_READ_TABLE" and pass the relevant QM Table name or View name to RFC and fetch the desired results
Option3:
Write Custom RFC (z-rfc)
Hope this helps!!
Regards,
Adarsh

No inspection lot created for new inspection type created

Hi all,
We create a new inspection type which is based on a copy-version of an existing inspection type. These inspection type has a inspection type origin of standard SAP 04 (i.e. Goods Receipt from Production).
Question 1 - we bumped into problem when come to testing in which when perform goods receipt, there is no inspection lot created, may I know why?
The following fields of this new inspection type are all checked; those not specified, are not flagged.
1 - Insp with task list (flagged); Automatic Assginment (flagged); Check Chars (flagged); Skip Allow(flagged); Automatic UD(flagged); Serial Number Poss (flagged).
Question 2 - for this kind of inspection type with origin 04, do i need to perform a goods receipt against a production order or purchasing order? How do I perform a GR against a production order?
Thanks.

Hi Tuffy,
Possibly you might not have ticked on preferred inspection type in material master. This could be one of the reasons. Try to do GR after ticking this.
The setting you have mentioned (flagged parameters)are seems to be correct. But lot generation is governed by preferred inspection type.
If you have assigned this newly customized inspection type to lot origin 04, then it would be used against production order and not the purchase order.
There are several ways to carry out GR against production order. It depends on the scenarios which you follow
1.     MB31 101 movement
2.     You may use backflush so while confirming order through CO11N auto GR is posted
3.     In case of repetitive manufacturing scenario generally GR is done by MFBF transaction
Regards,
Anand Rao

QM inspection type number 10

Similar Messages

Maybe you are looking for