QM process flow
Hi,
Can any one explain the general process flow of Qm module.I have no idea on the Qm management.
Thanks.
-Santhosh
Dear Santhosh,
In Quality Management following are the broad level activities need to be conducted :
1) Incoming Inspection : This is for raw materials, or other input materials on which the quality of final product is dependent. (For activating this, in QM material master you need to define '01' inspection type)
2) In process Inspection : This is the inspection in - process meaning in house inspection during the process inside. (For activating this, in QM material master you need to activate '03' inspection type)
3) Final Inspection or out going inspection : This is inspection of final products or finished product. This is to ensure that correct quality product is going to customer. (For activating this, in QM material master you need to activate '04' inspection type)
Apart from this you can do inspections at vendor, predespatch insp, Recurring insp ,competitors sample evaluation etc.
For doing all this in terms of SAP you need to do:
1) Quality Planning : Defining of masters like Master Inspection characteristics, Inspection method, sampling scheme, sampling procedure, catalog selected sets and code groups, then assign all these Masters in Inspection Plan . also assigning QM view to materiel master so that inspections are activated.
2) Quality Inspection : Inspection lot creation , result recording, defect recording and completing the lot by giving user decesion.
3) Quality control : This include raising notification, SPC, using dynamic modification, quality certificates etc.
4) Test equipment management : This includes Calibration of instruments
5) Control in logistics : This include Control in Procurement, Production and sales & distribution
you can get all details of these processes at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a6/df293581dc1f79e10000009b38f88/frameset.htm
Best Regards,
Shekhar
Similar Messages
-
URGENT:error while deploying a process flow
EMP_COUNT is a mapping which i have deployed .
when i try to deploy a process flow i get the following error:
OMB05602: An unknown Deployment error has occured for Object Type API8028: No signature is available for mapping EMP_COUNT because the generation language is undefined. Please set the generation language property of this mapping, or generate this mapping to set the generation language property to a default value..
thnx in advanceOMB+> OMBALTER MAPPING 'EMP_COUNT' SET PROPERTIES (GENERATION_LANGUAGE) VALUES ('PLSQL')
Fast enough? ;-)
Regards,
Detlef -
Cannot deploy process flow package specification from file
Hi,
we are using owb 11gr2 on linux. We successfully managed to deploy mappings and tables into a specification file, and then deploy from that file into the target database (RAC). But when we try to deploy a process flow package we run into an error:
A process flow package can be deployed to a specification file. But a deployment from that specification file fails with the error: " OMB05623: Cannot deploy specification from file. Exception follows. nulll"
### SETUP
set CONN_DESIGN "xxx"
set CONN_TARGET_DESIGN "yyy"
set CONN_TARGET_RT "xxx'"
set DIR "D:\\tmp"
set RELEASE "V0_2"
set file "$DIR\\$RELEASE"
set plan "FILE_DEPLOY_$RELEASE"
### Deployment via control center: works!
OMBCONNECT $CONN_DESIGN
OMBCONNECT CONTROL_CENTER $CONN_TARGET_RT
OMBCC '/KLINGEL_DWH'
OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN '$plan'
OMBALTER DEPLOYMENT_ACTION_PLAN '$plan' ADD ACTION 'PF_TEST' SET PROPERTIES (OPERATION) VALUES ('REPLACE') SET REFERENCE PROCESS_FLOW_PACKAGE '/KLINGEL_DWH/WF_DWH/PF_TEST'
OMBDEPLOY DEPLOYMENT_ACTION_PLAN '$plan'
OMBDISCONNECT CONTROL_CENTER
OMBCOMMIT
OMBDISCONNECT
### Deployment via specificatin file: fails!
OMBCONNECT $CONN_DESIGN
OMBCONNECT CONTROL_CENTER $CONN_DESIGN
OMBCC '/KLINGEL_DWH'
OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN '$plan'
OMBALTER DEPLOYMENT_ACTION_PLAN '$plan' ADD ACTION 'PF_TEST' SET PROPERTIES (OPERATION) VALUES ('REPLACE') SET REFERENCE PROCESS_FLOW_PACKAGE '/KLINGEL_DWH/WF_DWH/PF_TEST'
OMBDEPLOY DEPLOYMENT_ACTION_PLAN '$plan' AS SPECIFICATION TO '$file.xml'
OMBDROP DEPLOYMENT_ACTION_PLAN '$plan'
OMBDISCONNECT CONTROL_CENTER
OMBCOMMIT
OMBDISCONNECT
OMBCONNECT CONTROL_CENTER $CONN_TARGET_RT
OMBDEPLOY SPECIFICATION FROM '$file.xml'
### OMB05623: Deployment von Spezifikation aus Datei nicht möglich. Exception folgt. null
###OMB05623: Cannot deploy specification from file. Exception follows. nullIf we use the operation DROP it works. But REPLACE and CREATE do not work.
We get the error regardless whether the code is executed as an expert or on the command line at a windows client.
Does anyone knows a workaround?
Deployment via a specification file is a must due to license and architecture requirements.
Thanks,
Carsten.Its woked fine for me for OWB 10.2.0.4 .... some steps are missing from code like
when you are connecting again it should be
OMBDISCONNECT
OMBCONNECT CONTROL_CENTER $CONN_TARGET_RT
OMBDISCONNECT
OMBCC '/KLINGEL_DWH'
OMBCONNECT CONTROL_CENTER $CONN_TARGET_RTI think you can try the same on different system .
Cheers
Nawneet -
A/R process flow with notice of readiness for shipment
Hi,
I'm trying to implement the following A/R process flow:
- sales order
- xx% A/R down payment invoice
- notice of readiness for shipment
- incoming payment
- delivery
- A/R invoice (xx% down payment to be deducted here)
What's the best way to implement it?
Thanks
FabioHi,
no, it's something different. It is because we want to be paid before shipping anything.
In more detail:
- we request a certain amount of down payment after the order and before starting production
- we request final payment before we deliver goods
Thanks
Fabio -
MM Gurus , Can any one help me to provide me with the MM PO and Change PO process flow diagram .Pl send me the diagram or links to my email ID
Thanks in advance .Will give you points
James
[email protected]Dear James,
Process Flow:
1)Determination of Requirements: Through MRP, purchase requisitions
2)Source Determination: helps you identify potential sources of supply, creating requests for quotation (RFQs
3) Vendor Selection and Comparison of Quotations: The system is capable of simulating pricing scenarios
4) Purchase Order Processing: information from the requisition and the quotation to help you create a purchase order. scheduling agreements and contracts are also supported.
5) Purchase Order Follow-Up: The system checks the reminder periods you have specified. up-to-date status of all purchase requisitions, quotations, and purchase orders.
6) Goods Receiving and Inventory Management: Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number
7) Invoice Verification: The system supports the checking and matching of invoices, and clearing invoices for payment.
Flow Chart for PO & MM process :
RFQ (ME 41) --> Maintain Quotation ( ME 47) -> Price comparision ( ME 49)>
-->Create PR ( ME 51 N) --> Create PO ( ME 21N) --->
> Good Receipt wrt PO( MIGO)> Invoice Verification wrt PO ( MIRO)
I hope this will suffice your need & if satisfied please reward points,
Vivek -
Hello All,
Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
Link:
TM Overview + End to End Process Flow - YouTube
Thanks and best regards,
NavinVery Good Demo Navin
-
RPE-01008: Recovery of this request is in progress in process flows.
Hi,
I am calling shell script as an userdefined activity in a process flows.
All the process flows were working fine.
Today, all the process flows wherever the shell script is called ended up with an error showing " RPE-01008: Recovery of this request is in progress".
Could any one please explain, what might be reason?
Thanks in advance.
Thank you,
Regards,
Gowtham Sen.Hi,
we have exactly the same problem here.
Does anybody have a solution?
regards
Lutz -
To check whether a process flow is valid or not
Hi,
I want to check whether a OWB process flow is valid or not inside a PL/SQL block. Can anyone let me know about any repository table or view where I can check the process flow status.
Regards,
PouloseUse display schedule job option from the context menu of the start variant of the process chain.
When u chick this.. u will get the available job on this start process.. There u can see whether the process chain in schedule mode or not?
If u can see multiple schedule then u can delete the older ones which are not needed and then u can maintain only one schedule job.
If u click twice.. then there are chances that u might end up with the 2 schedule job with the same time frame.. .. so check the same with the steps mentioned..... if u find two jobs then u need to delete one.. if not there might be chance that ur PC might get trigger twice.. and one trigger will gets failed. and the other one will gets executed..
Thanks
I hope this is clear to u..
Assign points if this helps -
Process flow of excise duty from procurement to sales accounting entry with amount.
Dear Expert ,
Kindly any one help the process flow of excise duty calculation from procurement to sales accounting entry with amount. for example.- if material amount is Rs. 10,0000 and excise duty is 8% , edu ecss 2 % , and sec ecss 1%. I want know the accounting entry on- MIGO, J1IEX, MIRO, F-43 AND , PGI, BILLING DOCUMENT, J1IJ , TR6 CHALLAN, J2IUN.
Regards
AkshayaHi,
In case of
A. Procurement : there are two types of procurement viz. Local and Import
LOCAL
1. MIGO
Inventory A/c Dr
To GR?IR
2. J1IEX
CENVAT Receivable (Basic) A/c - Dr
CENVATReceivable (Ecess) A/c - Dr
CENVAT Receivable (S & H) A/c - Dr
To CENVAT Clearing
3. MIRO
CENVAT Clearing A/c - Dr
To Vendor A/chrough
4. F-43
No excise entry through SAP direct posting but through manual posting in case using TAXINN procedure.
5. TR6 Challan
PLA Payment (Basic) A/c - Dr
PLA Payment (Ecess) A/c - Dr
PLA Payment (S & H) A/c - Dr
To PLA on Hold A/c
IMPORT
1. MIRO
ECS+SECS on Cus+CVD A/c Dr (consists of ECS on custm+cvd and S & H on custm+cvd)
CVD Clearing A/c Dr (consists of Additional Duty CVD and CVD)
Customs Clearing A/c Dr (consists of Basic Customs)
To Customs Vendor
2. MIGO
Inventory A/c - Dr
To GR/IR A/c
To Customs Clearing (consists of Basic Customs)
To ECS+SECS on Cus+CVD (consists of ECS on custm+cvd and S & H on custm+cvd)
3. J1IEX
CENVAT Receivable (Basic) A/c - Dr
CENVATReceivable (Ecess) A/c - Dr
CENVAT Receivable (S & H) A/c - Dr
To CVD Clearing
4. F-43
No excise entry through SAP direct posting but through manual posting in case using TAXINN procedure.
5. TR6 Challan
PLA Payment (Basic) A/c - Dr
PLA Payment (Ecess) A/c - Dr
PLA Payment (S & H) A/c - Dr
To PLA on Hold A/c
Sales
1. PGI
COGS A/c Dr
To Inventory
2. Billing Document
Excise
ED Suspense A/c Dr
To Liability for BED
To Liability for ECS
To Liability for S & H
Customer
Customer A/c Dr
To ED Suspense A/c
To Revenue
To VAT / CST
Hope your doubts are clear.
Regards,
Tejas -
Training and Event management.Process Flow..
Hi, Experts,
Can any body give me some notes on Training and event management and process flow also like integration between ECC-6.0 to Non SAP
1.Training request
2.Appraisal documents for performance feedback
3.Tracking Feedback processes
Pls help me in configuring these services.
With Regards,
San Rao.Hi san rao,
as per your reply you using the new appraisal template and also you have released the template now simply run the BSP application HAP_DOCUMENT and access the appraisal documents
attach these BSP applications in your portal system.
following pages of the above application will be help full
documents_todo
documents_received_open2
documents_where_participated
Regards,
Umesh Chaudhari. -
When a process flow activity takes a long time to run.
Hello,
I have a process flow activity that sometimes takes a long time to run so that the process flow never ends. Is it possible that I can set the activity so that during a certain time that this has not been executed automatically flow process to continue?
I'm Using Oracle Warehouse Builder 11g on Windows Server 2003 R1.
Greetings and thanks.What I've done in the past is just use a small polling procedure (PL/SQL) and a conditional transition in the process flow, depending on what the proc returns (Continue or Fail) then the flow of control in the Process is changed.
I think the key also is to not have too much paralellism going on too, that way it's easy to streamline the PF and remove slow moving processes to a more linear path (stopping bottle necks on your logical AND).
Edited by: NSNO on Apr 29, 2010 2:31 PM -
How can I pass parameters from one process flow to another process flow?
How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
KishanHi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark -
Can I change a process flow at run time??
Hello everybody,
I work in Oracle BPMS 11.1.1.5. I need to change a process flow at run time due to changes in the business logic, I mean add, delete and modify tasks, navigation flow, etc. I know business rules can be modified using Oracle BPM Composer, but I couldn't find the way to modify the process flow. I have seen other BPMS, like BizAgi, for ex. that can do that. Do Oracle BPMS have that functionality? Please I need it a lot!!!!
Regards and thanks in advance,
isabelbernelyHi
As JonPetter mentioned, you can get this and preferably get only from Support. I hope you have some license if you going to prod with this. Use that and if possible talk to your sales guy and create a support account. Then request the feature pack. The thing is, if we put it in some public shared location, it is the violation of using the oracle product. Unless someone takes risks they may upload but still its not advisable.
Sorry
Ravi Jegga -
Experts VS Process Flows on OWB 10g Release 2 (Paris)
I was looking at the the new features list for OWB 10g Release 2 (Paris), and I notices the new feature called Experts. Does anyone have any insight into when an Expert would be used instead of a Process Flow? It doesn't look like Process Flows are going away, so I was trying to get a grasp of the use for Experts.
From Here:
http://www.oracle.com/technology/products/warehouse/htdocs/owb10gr2%20new%20features.htm
Experts. Experts are solutions that enable advanced users to design solutions that simplify routine or complex tasks that end users perform in Warehouse Builder. You can design these solutions in the Expert Editor which resembles the Process Flow Editor and shares many of the same commands and navigational tools.Hi,
Just to start with the Experts capabilities, they can be used for designing schema objects.......I tried with an expert for sampling the source files, creating External Tables on top of it....validating and deploying..........itz very interesting to work with.........I am unable to see the practical use of this for end users.....
where as we all know, the PF can only be for executing the deployed objects.....
Mahesh -
A/c determination process flows automaticaly to the exact plant wise
Dear All,
Pls explain the process abt a/c determination for service po's (with item catelory & a/c assign) during miro.
For example. I have three plants and same tax codes used for all plants. I have defined in FS00 different G/L number for every plant as per below,
For plant #1 - ESA - 101, ESE - 102, VSE -103
For Plant #2 - ESA- 201, ESE-202, VSE-203
For Plant #3 - ESA- 301, ESE-302, VSE-303
And assume gl is assigned in OB40 (w/o tax code combination) as,
ESA-101 , ESE - 202 , VSE -303 .
While doing miro for what ever plant, it's going and set on appropriate plant g/l nbrs based on trns. key. pls tell me how a/c determination process flows automaticaly to the exact plant wise.no answer
-
Error in using External Process in the Process Flow
I Created a Process Flow with an external process to Move the file from one location to another location,
I gave the below parameters for the External Process
COMMAND: move
PARAMETER_LIST: ?F:\\FlatFiles\\in\\company.txt?F:\\FlatFiles\\error\\company.err
SUCCESS_THRESHOLD: 0
SCRIPT:
The environment is
Windows 2003
OWB 9.2.0.8
OWF Builder 2.6
When I deploy and execute using Deployment Manager, it gave me the below error
Starting Execution TEST
Starting Task TEST
Starting Task TEST:EXTERNALPROCESS
CreateProcess: move move F:\FlatFiles\in\company.txt F:\FlatFiles\error\company.err error=2
Completing Task TEST:EXTERNALPROCESS
Completing Task TEST
Completing Execution TEST
What am I missing something here?
Is my Parameters correct?
GIve me the link where I can find more on using External process.
Please...please...help me..
ShreeNikolai,
I have created a simple process flow which only calls the external process. The script is on the same host as the process flow is deployed to.
I have used two diffent values for the command parameter.
1. I placed the full path of the file in the command parameter and left the script parameter blank:
COMMAND: /edwftp/ppas/scripts/ClearPPAS.sh
PARAMETER_LIST:
SUCCESS_THRESHOLD: 0
SCRIPT:
2.I placed the bash command in the command parameter and the full path in the script parameter.
COMMAND: /usr/bin/sh
PARAMETER_LIST:
SUCCESS_THRESHOLD: 0
SCRIPT: /edwftp/ppas/scripts/ClearPPAS.sh
Both of these appear to work as they print out the statements inside the script but the files that are supposed to be removed still remain.
Starting Execution EXTER_FILE
Starting Task EXTER_FILE
Starting Task EXTER_FILE:EXTERNALPROCESS
Removing ActivatedAudit.dat...
Removing ActivatedCustomers.dat...
Removing ActiveAudit.dat...
Removing ActiveCustomers.dat...
Done!
Create the Activated Customers data file...
Create the Active Customers data file...
Done!
WARNING: Log file truncated - see RAB for further information.
/edwftp/ppas/scripts/ActivatedCustomers.sh: /edwftp/ppas/log/ActivatedCustomers.log: cannot create
/edwftp/ppas/scripts/ActiveCustomers.sh: /edwftp/ppas/log/ActiveCustomers.log: cannot create
WARNING: Log file truncated - see RAB for further information.
Completing Task EXTER_FILE:EXTERNALPROCESS
Completing Task EXTER_FILE
Completing Execution EXTER_FILE
The permissions on the /log direcotry are 775. The user I register the file location with owns this directory.
Can't think of anything else I have missed. I really appreciate your help :)
Ryan
Maybe you are looking for
-
Java is pure object oriented programing language or not why?
please clear java is pure object oriented programing language or not why?
-
the aniweather tool bar that did appear at the top of screen is no longer visable hence I cannot get alerts or open other cities It does give me the popup for a few seconds when I open Firefox
-
Sharing Ical calendars with another PC outlook user?
Can I share iCal calendar with PC Outlook users? Our platform is Exchange server. Thanks
-
OK, as long as my prayer wheel is spinning, I might as well ask. I'm getting to persistent error messages on startup. 1) Warning: Cannot find unit-address in xsvc.conf 2) syslogd: line 24: Warning loghost could not be resolved. each seems easy. All t
-
I have read that the AppleTV can supply true 5.1 channel separation (when available) by being connected either by HDMI or a digital audio cable. As a novice here, if the HDMI goes to the television and a digital audio cable connects the TELEVISION (n