Qosmio F20-111and Windows Vista - cannot get sound and display driver to work

Dears
I have just installed windows vista home premium 32 bit, but I faced 2 main problems which are:
1- The sound:
2- The graphics card GO 6600 128 MB
I found the driver for them but it did not work so I need you help please.
Regard

Hi
Unfortunately I do not have Qosmio G20 but if you use search option on this forum you can find interesting topics about Vista on Qosmio F20.
For sound check http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24004
Display maybe this will help http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21823&messageID=80423
Be sure the BIOS is updated with latest version.
Bye and good luck!

Similar Messages

  • Windows Vista cannot find bonjour and it won't allow me access to my ipad.

    For some reason my Windows Vista cannot find bonjour and it won't allow me to do anything on my ipad. If I reinstall itunes will that work? If I update itunes will that work?
    Please Help....
    Thanking You in advance,
    Frankie

    Hi Frankie,
    This article covers how to check if Bonjour is installed correctly and how to reinstall if it's not:
    Bonjour for Windows: How to tell if it successfully installed
    http://support.apple.com/kb/HT2703
    Cheers!
    - Ari

  • HP Smart Web Printing / IE8 / Windows Vista: Cannot get icon to appear!

    I've installed HP Smart Web Printing 4.5.1 in IE8 running under Vista SP2.  I cannot get the icon to appear.  Under Tools/Manage Add-ons, "Show or Hide HP Smart Web Printing" is reported as "enabled".  When I select "Show or hide HP Smart Web Printing" under the double arrows at the far right of the tool bar, nothing happens.  I see others have had some success at getting through this, but nothing seems to be working for me.  I've tried removing and re-installing the utility to no avail.  What do I have to do?

    Hey HP ...  Does anyone from HP monitor these posts and provide answers, as one might expect?  Is anyone listening?  Is anyone there?  Does anyone CARE?

  • Cannot get brand new hard drive to work. Disk utility states operation not supported when I try to erase or partition?

    Without any success, I cannot get my hard drive to work in disk utilities. I am able to see the disk in the upper left hand column, but when trying to initiliaze the software always reads operation not supported. Any ideas?

    You probably have too new a hard disk.  Contact the hard disk manufacturer and ask what jumper setting is needed to drop to 1.5 Gbps SATA speed.
    Either that, or return the disk, and go to http://www.macsales.com/
    They can be sure to equip you with a proper hard disk.
    Note formatting is key as well:
    http://discussions.apple.com/docs/DOC-3003

  • I did an hp update and now i can't get sound and my microphone isnt working, HP Pavilion dm4

    I did an HP update about 2 hours ago.  Now, I can't get any audio and the microphone isn't working.

    you can try system restore, restore point where the critical update is
    ▬JM▬

  • Since uploading iOS7.03 my iPhone 4S cannot get WiFi and Bluetooth is not working properly.

    Why will my iPhone 4S not work properly since the iOS7.03 upgrade? No WiFi (greyed out, button will not move) and Bluetooth not working.

    it's a well known issue.... wifi and bt died in many 4s.... one is mine..

  • My windows say the quicktouch on screen display has stopped working and i have no volume??

    HP Pavillion Entertainment PC dv6000
    p/n KC302UA
    operating system-Windows Vista
    message says Quicktouch Screen display has stopped working. I have no volume and my volume bar wont work.
    How do I fix this?

    Please do a BIOS update and this may fix the issue,
    If you wanna know how to do the same, please go to HP.com- Support & Drivers- Enter product number - Choose OS - Select BIOS - Download and install. Make sure that the Charger is connected to the Computer.

  • TS4463 I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.

    I am using Windows Vista with Outlook 2007 and iCloud.  Everything has been great until this morning.  I'm suddenly getting the message "Set of folders cannot be opened.  The information store could not be opened.  I tried running the repair utlity to repair the iCloud however I am still getting this error message.

    I tried rebooting.  It didn't change anything.

  • I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

    I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

    iTunes 11 is compatible with
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    Try:
    Trouble installing iTunes or QuickTime for Windows

  • When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

    When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

    Hello, ksb2. 
    Thank you for visiting Apple Support Communities.
    We are investigating this issue. This article will be updated as more information becomes available.
    iCloud: iCloud Control Panel setup cannot be started
    http://support.apple.com/kb/TS5178
    Cheers,
    Jason H.

  • When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an erro

    When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?

    Hello everyone,
    I was having the same issue:
    "Setup Error. Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Quit."
    If you receive this error also, press Quit and follow these steps:
    1. Start
    2. Control Panel
    3. Administrative tools (in classical view)
    4. Event Viewer
    5. Application
    You will see something like this:
    Double-Click for error (emphasized by red color). I have an error like this:
    "Error 1327.Invalid Drive: E:\" if you have the same or e.g. Drive F:\ ir whatever letter, you should solve this problem extremely easy - just insert USB-flash into computer (it will launch as E\ or whatever disk) and than run installation again. It will work than.
    Setup doesnt start if disk is offline.

  • I cannot get sound from the web, you tube, etc, however, my speakers are on, my itunes play sound?

    I cannot get sound from the web, you tube, etc, however, my speakers are on and my itunes play sound? What gives?

    Hi,
    Try the following.
    First, download the Flash uninstall utility on the link below and save it to your Desktop.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows and run the uninstaller.  After this has completed, restart the notebook.
    Next, download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if Youtube videos etc play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart IE.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • When i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86"   what should i do?

    same problem. tried the ff fixes from microsoft but no joy
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
    http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
    other ideas would be appreciated.
    cheers

  • I cannot get sound through my laptop speakers ever since I used a digital speaker

    I cannot get sound through my laptop speakers ever since I used an external digital speaker.  Cannot seem to switch back to lap top speakers in my SYSTEM PREFERENCES...only showing DIGITAL out put option

    Hi there Lutostan,
    It sounds like you have disconnected the digital audio speakers from your MacBook Pro but all you have available in your audio settings. Take a look at this info from the following article named:
    Troubleshooting issues with no audio from built-in speakers on Macs
    If the Internal Speakers option does not appear in the Output tab and your computer is not a Mac Pro, check that Digital Out is present as in the image below:
    Confirm again that all external audio devices and cables have been removed.
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    If you do not see a red light, proceed to step 5.
    If the issues persist, contact Apple support for further troubleshooting assistance.
    Learn more
    You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I cannot get sound through cable box after connecting apple tv

    I cannot get sound through cable box after connecting apple tv, any suggestions?

    Perhaps you disturbed or loosened the HDMI or other cable  from the cable box to the TV?

Maybe you are looking for

  • Cancel runnning SQL in SQL*Plus Worksheet?

    Hi, can I Cancel a runnning SQL in SQL*Plus Worksheet? Thanks Markus

  • Need Help with UNINSTALLING Photoshop CS

    Hey everyone I want to uninstall my Photoshop CS application on my mac (The whole CS suite actually) since its takes up a ton of room and I no longer use it. So I want to know how can I safely uninstall them. I read around and watched some youtube vi

  • Customising Registration form

    Can anyone help me to show 'review your order' on the registration buy form? My client would like it to look like it does on this site: www.hibermate.com Three columns, 3rd being 'review your order'. Can anyone help me to achieve this? They would als

  • Query to Excel file

    Hello, I want to output a query into an excel spreadsheet which can be saved as needed. This is my code <cfheader name="Content-Disposition" value="attachment;filename=Leadsdatafile.xls" > <cfcontent type="application/vnd.ms-excel" > Then I run my <c

  • Compile radeonfb kernel module

    what I want to do, is to compile just radeonfb as a module (so that I could use it), without rebuilding anything else because the entire kernel takes way too long (like an hour or so). How about this possibility; a pkgbuild that builds the module sep