Qosmio G35-av600: How to use the internal display as a monitor using composite-in?

I want to hook up my video game system and use my laptop monitor, but I can not figure out how to change the settings so that my monitor displays the video game? Composite in settings?
I have a G35-av600 purchased last june. If anyone has any suggestions, let me know

Hi
Im not sure if I can help you because I know only something about the Qosmio G10 and G20 and your Qosmio seems to be a US notebook but I will try my best ;)
On the Qosmio G10 for example you have to change the input settings in the Toshiba picture enhancement utility but I assume you dont have this tool preinstalled.
But I think the composite in is a right jack to built the connection with the game station.
I think in the Advanced graphic card settings you should be able to find the right options.
Play a little bit with this settings.

Similar Messages

  • When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media.  Any ideas on how to fix this.  It only happens in fcp.

    By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
    Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
    Good luck.
    Russ

  • Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

    Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

    You can output audio thru HDMI, with appropriate adapter.
    You can use additional cheap external usb audio for monitoring.

  • Qosmio G35-AV600 ---- Drivers & tools in german language?

    +++++ Happy new year to all of you +++++
    I'm interested to buy the Qosmio G35-AV600 in the US. I like to change the keyboard into a german one. Where can I find all the drivers and software utility tools in german language or which german Qosmio notebook is is compartible to the G35-AV600? This notebook will be a gift for my sister and she doesn't know how to speak english very well. I like to set up the whole notebook into the german language included Windows XP.
    Who will be able to help me?
    Thanks & regards,
    Marc

    Hello
    All you need you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads > Support Homepage.
    Only problem I can see there is TV tuner because it is country specific and I am afraid it will not be possible to use it in Europe (another TV standard). I am also not sure how the WLAN card will work because one user has reported he has problems in UK with US machine.
    I know that units are cheaper in US but unit like Qosmio should be used with all hardware and all options. Qosmio G30 series is great but maybe it will be better to buy F30 in Germany and your sister will not have any problems.
    Please do not understand it as something negative but it is just my opinion.
    Happy New Year!!!

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • How to use the second display for installation OS in my vertical lines iMac

    My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

    Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
    Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

  • How to stop the internal batch session

    Hi ,
    How to stop the internal batch session, which is triggered from the program.
    When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
    I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
    However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
    Pleas advise.
    Thanks,
    cartesian.

    Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
    With SM50 you will only see the process running if it is running on the same application server you are logged on to.
    Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
    Hope that helps,
    Michael

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

    The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
    The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

    Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
    Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
    Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

  • Using The Internal Audio

    Hello,
    I've been experiencing problems with a third party audio interface, namely Mbox, working smoothly with Logic. It was suggested to me that I should try using the internal audio for working with Logic. I was laboring under the false assumption that the internal sound was only 16bit. I would like some feedback from someone who uses the internal audio in a home studio situation. Namely 1. If possible, how to connect the internal output to an external monitor system. 2. How to connect a preamp for recording through the internal sound. Can this even be done and can I expect results equal to the Mbox?
    Thanks

    Actually, it doesn't make a difference if it's a TRS or an XLR. The difference is in the Apogee's inputs. With the One, you have either a instrument quarter-inch input or a Mic XLR input. Neither works with a balanced +4 line signal, which is the signal coming from the Grace. With the Duet, you can switch internally the XLR inputs from Mic to +4db line signal.
    Also, I know the Grace preamp is really good but another possibility is to stop using it and plugging your mic directly into the Apogee preamp. I know it can sound weird as a suggestion but you'd be surprised at how good the Apogee pres are. And if you only need one preamp, the One will work for you. One last thing: the Duet is Firewire, the One is USB. That means you should be able to have lower buffer settings with the Duet, hence less lantency.

  • How to import the internal table into subroutine as parameter

    how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

    Hi Yong,
    try this:
    parameters: p_tabnm like dd03l-tabname.
    field-symbols: <fs_tabname> type standard table.
    data: itab_ref type ref to data.
    create data itab_ref type standard table of (p_tabnm)
                         with default key.
    assign itab_ref->* to <fs_tabname>.
    select * from (p_tabnm) into table <fs_tabname>.
    perform subroutine tables <fs_tabname>
                       using p_tabnm.
    *&      Form  subroutine
          text
         -->P_<FS_TABNAME>  text
         -->P_P_TABNM  text
    form subroutine  tables   p_tabname type standard table
                     using    p_tabnm.
    Here p_tabname already has the structure of the table you gave as input
    parameter
    endform.                    " subroutine

  • Qosmio G35 AV600 Sound Driver Reinstall

    I accidentally removed the sound driver trying to get rid of some of the bloat on my machine. I am working under XP with SP3 installed. Tried everything to reinstall the SigmaTelHighDef Audio CODEC but still get the report Cannot Start Code 10. Also on boot-up I get message Runtime error 91 object variable or with block variable not set.
    I am pretty sure it's a Registry problem but all my registry fixer programs don't seem to fix. Anyone got help? I have installed/uninstalled/installed the SigmaTel driver 2 or 3 times.

    Qosmio G35-AV600 
    Tried everything to reinstall the SigmaTelHighDef Audio CODEC but still get the report Cannot Start Code 10.
    This is not a codec.
       SigmaTel HD Audio Driver for Windows XP
    Please explain to us what you tried and what happened each time. We need the exact steps, click-by-click, and also a quote of exact messages.
       Description of Code 10-related errors that Device Manager generates in Windows-based computer
    -Jerry

  • How to Read the internal table for the data download from the spool

    HI all,
    I have one issue regarding the spool ,we are getting the correct output as per requirement of  user but when we send the same to the user in pdf format they did notget the same.
    they are telling that the due date is missing from the pdf.
    Please advice me how to track the internal  table for the spool data converted intopdf in a readable format.
    the FM used for the above task is : 
    call function 'CONVERT_OTFSPOOLJOB_2_PDF'
    Please reply if any one worked on the same.
    Thanks in advance.
    Gaurav,

    Hi Wang,
    Please let me know how you solved your question.
    Points will be rewarded.
    Thanks,
    Arun.

  • How to realize the internal frame as in Swing?

    How to realize the internal frame as in Swing? JavaFX has the similar function?

    For system tray in JavaFX 2.2, you need to use AWT, see =>
    Re: How to call Stage’s show/hide methods from AWT-thread
    http://docs.oracle.com/javase/tutorial/uiswing/misc/systemtray.html
    awt - JavaFX app in System Tray - Stack Overflow

  • Using the internal camera in a 3G  mobile phone.

    It's possible to use the internal camera in a 3G mobile telephone or only the external?
    thank you.

    Hi,
    i have an application that use the "external camera" (i don't know the exactly name) but i don't know how could i especify to the player that i want to use the "internal" camera (the camera what focus the face in 3g phones).
    I supose that the url (capture://video) should be different in the below code.
    mPlayer = Manager.createPlayer("capture://video");
    Thanks for all,
    Benji.

Maybe you are looking for