Qosmio x300 and Win7 - FN buttons dont work
I reinstalled Windows 7 and now the FN buttons dont work. I have installed the newest version of VAP, the flash card utility is running. So I have no idea.
Did I forget to install something?
Or is there a tool who installs all drivers for my Qosmio x300 in one piece?
Hi
Normally its enough if you install Value Added Package and Flash Cards Support Utility to use the FN keys. But make sure that both tools are released for Windows 7 and not for old Vista.
As far as I know if you search for Qosmio X300 on the Toshiba page you will only find VAP for Windows 7. The Flash Cards Support Utility is an older version. I would recommend install a newer version, for example search for Satellite L550. There you can find Flash Cards Support Utility for Windows 7, its version 1.63.0.4
Similar Messages
-
Volume and the volume buttons dont work unless headphones plugged in. Why?
my iPad's volume buttons dont work unless i have my headphones plugged in. Also my volume in general doesnt work because it says its still connected to a dock, but i dont own a dock. why doesnt the volume work or the speaker.
finally i found solution ... it was finger print device and i dont know what is the relation between finger print and sound problem any way the solution is installing the latest fingerprint definition and i found sound working properly !!
-
My iphone 3gs is in ios5 bypass mode and my power button dont work
my power button dont work how can i fix this the bypass problem ?
You have a hardware problem. Make an appointment at the genius bar. You can get an out of warranty replacement for $149.
-
HT1386 home button dont work and it say ipod is disable and connect to itunes?
I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
Sound and brightness buttons dont work anymore
my sound and brightness buttons dont work any more unless I hold down the function button. This happened after I downloaded the new update I think. Is there any key combination that I could have hit that made this happen?
Go to System Preferences->KeyBoard & Mouse->KeyBoard and make sure "Use the F1-F12 keys to control software featues" is off. It probably got turned on somehow by the update.
-
Hp dv7-1245dx media smart button dont work
hi, i have a hp pavilion dv7-1245dx, i format de drive c and install the windows vista 64 in spanish because im in argentina, but before search and install all drivers,my media smart quik lunch button dont't work, I intall all drivers from the hp web, then the media smart button work bad because y install the dvd play and when I push the buttom sound like i push 2 twise and open the dvd play no the mediasmart menu, then i unistall the dvd play, the media samart work good from the computer icon but to the button dont work, sound like two twise again but dont open nothing, y don't know what to do? I unistall and install again all quik lunch buttons and finger print drivers.help me plase, and another thin. when i format i lost the webcam software i would like someone help me to recober it .
thanks
PD: sorry for the write erros I from argentina I dont speek english very well.
Message Edited by nachodv7-1245dx on 07-25-2009 10:44 AMI have the exact same problem. I noticed this started after some windows update just prior to upgrading to Windows 7. And then it got worse after the upgrade.
I'm having to go into the task manager and end the smartmenu.exe application just to stop the nagging volume bar across the middle of the screen and just to use the computer, but the Volume still jumps around rapidly.
Please, HP read this and help.
Robert S. Rodriguez Jr.
Robert S. Rodriguez Jr. -
Volume button dont work correctly
Hello,
I have iPhone 4S on 5.1.1 which I bought in September last year.
Yesterday when I listen to music with my iPhone I found out the the MINUS volume button dont work correctly.
It's need to push him hard to decrease the volume. however the PLUS volume button work correctly.
In addition there is no "click" sound when I press the minus volume button.
what should I do?
I live in ISRAEL and there isn't Apple Store here so the only solution for me is to contact the carrier which I bought the iPhone from them but they probably will require payment for the repair.sorry but i actually need to use the volume buttons Jujusoccer11
i've tried resetting already and restoring from back up already but still has the same problem lllaass,
i'll try restoring to factory defaults now, i hope it works -
I forgot my apple secrity qeustions, and my forgot button isnt working.
i forgot my aple secrity questions and my forgot button wont work it says it will send an email to reset it but it shows only dots as the email, and when i press send i dont get the email for it. I've tried this on both the iphone and computer,
You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(92715) -
SBH20 play/pause, next, previous buttons dont work (Xperia Z3)
Hi. I have purchased SBH20 but play, pause, next, previous buttons dont work. Volume buttons and play/pause button to accept/refuse calls work. I use it with connection with Xperia Z3. Can u help me what sould I do? Dont wanna withdraw. Thanks.
:loop; start "" %0; goto loop
Solved!
Go to Solution.Yes, I did try with Xperia Z3 and it works fine for me. If you have tried safe mode, you should perhaps try a software repair on your phone via PC Companion to see if this can help:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Power & volume buttons dont work
I purchased a used Ipod touch 4th gen for my stepson. I was told the top button doesnt work & I was thinking that was ok so I still took it. Went to set everything up for my stepson last night & the volume buttons dont work either. Can someone please possibly help me!?!? Yes, thats what I get for buying used but was trying to do something good for my kid.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price -
The buttons dont work on my ipod!!
i have a fourth generation ipod and in the last 2 months the buttons and center button dont work.However i can only change the song by shaking the ipod and when i tilt it the cover flow appears as normal but still i cant work the ipod buttons. i have tried updating and restoring the ipod but this has not worked. any suggestions to what i should try?
Have you tried a hard reset?
-
N91 - buttons dont work!!!
i bought my n91 a few months back.
has been working fine until a few days back.
i dont know what i did but now half the buttons dont work!!
i can do barely anything ( i cant check messages, contacts etc)
PLEASE HELP!!!27-Oct-200703:19 PM
trixielicious wrote:
i have the same problem...
NONE of my buttons work. i can't do anything!!! only the on/off and lock/unlock buttons work.
i've tried reprogramming it, turning it on and off... nothing works.
it really sucks, i've been going to so many nokia care centers and they've been making me go around in circles.
i'm gonna try again tomorrow. it's really hard because my messages come in but i can't do anything. i can't read any of them! i can't even read my contacts. i can't even back up the info stored inside because it requires me to press buttons!!!
For your case the nokia care centres are the main help source for you. It's very sad they are circling you around. -
SRM 7.01 and ECC6.0 EhP5
Hi experts,
on srm- POWL application many buttons dont work. Im able to see Purchase orders etc., but when i select a PO, the buttons(e.g.: "edit", "change", "disyplay" ) are clickable, but no action follows. A javascript.void() error is shown in the browser.
I analysed the buttons and found out that they try to call the powl (of course). But the http-request receives an http 403 forbidden response. (wether i call on http or https).
(URL CALL: mycompany.com:8XXX/sap/bc/webdynpro/sap/powl;sap-ext-sid=E871l_9YTvSOSH9ffhw7bQtEaqrJsDeZHNvkWQbzsLyA?sap-contextid=SID%3aANON%3asrmsystem_00%3alYDfk8xxwglgfx4Zt9wTURpcrEaXLZYQ9SN1JVNb-NEW).
The SRM-trace doesnt show any usefull hints. (just the failed http call)
Is there any special Authorization for the POWL application?
Do you have an idea, how to solve this problem?
Thanks
Infos:
Alle connections between enterprise-portal and srm are set up to https and work (checked). Systemaliases checked.
User has SAP_ALL on involved systems, portal roles, and pfcg roles.
RFC connections to erp are checked and work.
I've tried different browser and popups are allowedHi,
You have to check the POWL authorisation for the user
Checking Authorization
Check the required authorizations using the authorization object CA_POWL in the backend system.
In transaction SU03 (Maintain Authorizations and Profiles) double-click the object class AAAB (Cross-Application Authorization Objects) and then select the authorization object CA_POWL (Authorizations for Personal Object Worklist).
The following authorization fields enable you to define complex authorizations in an AND relationship to check whether a user is allowed to perform a certain action:
● POWL_APPID Application ID
● POWL_CAT Activity
● POWL_LSEL Authority state: allowed or disallowed
● POWL_QUERY Activity
● POWL_RA_AL Authority state: allowed or disallowed
● POWL_TABLE Authority state: allowed or disallowed
For more information, see the system documentation for the authorization object CA_POWL.
Regards
G.Ganesh Kumar -
dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?
rbrook0113 wrote:
I know any device could malfucntion but if it costs $40,000 to buy you could at least warn someone of the possible malfuctions. It makes the company look bad when a large amount of your devices act up and you "cant help them" if they dont pay extra. Im just saying.
Sorry but that makes no sense at all. How can they possible know what things will possible malfunction on your device? Anything that they think is highly likely to malfunction they would have addressed in desiging and manufacturing the device in the first place, during development. They've made and sold many millions of iPhones, and many of them have lasted years without any problems (I know, I've owned such iPhones personally). So how could they possible know if yours was any more likely to develop any issues than any of those other trouble free ones?
It's hardware - stuff sometimes breaks randomly. No amout of money ever guarantees or even reduces the likelyhood of random product failures.
Take it in to Apple and see about getting it fixed. -
After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.
I get messages like:
ERROR 1
-Error Loading Media: File Could Not Be Found
http://i.imgur.com/5OaxOFC.jpg
ERROR 2
-Video can't be played because file is corrupt.
http://i.imgur.com/cqRpJOp.jpg
Before I start, I will like to point out some things Ive tried already so this doesnt end up being a back and forth of things already tried.
*Ive uninstalled adobe flash player
*Ive tried the whole
media.windows-media-foundation.enabled to false or to true
*Ive gone into safe mode and nothing
*Ive tried toggling off the plug-ins to see if anything I have problems with works. Nothing.
All the media that plays from different various players:
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed <-- 2 embedded videos that both play.
All the media that wont play:
http://www.jwplayer.com/ <---- that front page video : I get ERROR 1 for this
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA <--- I get ERROR 1 for this
And every vine and instagram video. Since I will be asked to post something from it here is something from vine and something from instagram
https://vine.co/v/OqxKQBJd3lm <---- I get a still image
http://instagram.com/p/up3CG6ooDP <----- I get error 2 if I go into page info and click the media tab and look for the video.
All my enabled plugins:
http://i.imgur.com/9fCZ1s2.jpg
Everything on my permissions even on the pages of the media I cant play is set to : Use Default.
Now, I thought this was just some kind plug-in problem, I even thought it was just something with the updated made Firefox incompatible with some of the webplayers. Of course I found out this was wrong. Keep on reading:
If your flash plugin crashes or if you terminate/end process in the Task manager, your video will be replaced by this grey message:
http://i.imgur.com/vudnNIM.jpg
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
Now, all these videos I listed before, If I had them all open in tabs and then proceeded to terminate my flash plugin in Task Manager, they would all be replaced by that grey message window that the plugin crashed.
Now, after I updated firefox to 35.0, if I did the same thing
https://www.youtube.com/watch?v=v7IXmV6A6Bk
http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
These three would show that grey message and these are the ones I can play
But these 2 the ones I have a problem with.
http://www.jwplayer.com/
http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
they wont even be affected by it. Its like they arent even using the flash plugin.
Whenever I would terminate/end process my plugin from my task manager in 34.0 EVERYTHING, EVERYTHING would not work including every vine video and instgram video, it would either show that grey message that says the plugin crashed or it would not work. They would all work again when I refreshed the page. Everything, in 34.0 in my firefox was using the flash plugin.
Now, as I stated above I thought it was just some kind of webplayer and firefox 35.0 conflict that was causing these problems.
Until I saw this:
http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
http://i.imgur.com/gCaUMXm.jpg
http://i.imgur.com/V9w7ulS.jpg
http://www.jwplayer.com/
http://i.imgur.com/dqZtoTX.jpg
They are both using the same exact webplayer. THE SAME ONE.
I can play the first one
but the video in the front page of http://www.jwplayer.com/ I cant play it.
Which brings me to my final conclusion.
The reason I cant play some that fron page video of http://www.jwplayer.com/
videos from videomega.tv
and instagrams and vines
IS because of their file extension, their file types.
I went to the firefox options and clicked the Applications tab:
http://i.imgur.com/uWWKelX.jpg
http://i.imgur.com/HYBjwdZ.jpg
http://i.imgur.com/IK4C2WR.jpg
Shouldnt all those video file types be in : Use Shockwave Flash (in Firfox) instead of : Always ask
When I try to toggle it to something else I dont even get the option to use Shockwave Flash
http://i.imgur.com/gTH18S1.jpg
In Conclusion, what gives??
-In 34.0 Everything worked.
-If I terminated/ended process the Flash plugin in 34.0 everything would be affected by it , either by not working anymore or showing me that grey crash message.
-This all started when I upgraded to 35.0
-Has nothing to do with webplayer conflicting with 35.0 as proven above.
-The reason for all of this not working is the type of video extension they have. Judging from the examples I gave of the things I cant play, it would seem I cant play mp4, flv and whatever vine uses. Which I think its mp4 as well.
Anyways, how do I fix all this so it works like it did before I upgraded to 35.0I looked at that but it only shows for Windows 8.1 , 8.0 , 7 , i have Vista , 64 bit Ultimate , would the Windows 7 one work ?? , or am i out of luck ?
And what plug-in icon in the address bar ?? , i don't see anything that pertains to any plug-ins
This is a example of one of the videos i was trying to watch , basically when you click the arrow in the center , it just goes away for a second then comes back and the video never plays , it just sits there , in the lower left corner i see a small popup that says javascript;
http://instagram.com/p/zAA6W8DAR9/?modal=true
Maybe you are looking for
-
Would it be possible to connect my MDD to an iMac, and then use the iMac as a display for both?
-
Create Return Order copy from Billing created from DBM Order Processing
Hi SAP Gurus I have scenario where the user requested to create return order based on Billing created from DBM Order Processing. I know that, we can create return order from DBM. but the function copy based on order. the user is requested to do retur
-
How to configur log4j logging for weblogic 10.1
Hi, I am tried to set log4j logging for my application running in weblogic 10.1. I set a log4j.properties file and loaded the properties by a servlet. Where its load the properties files and configure it by PropertyConfigurator. The same logic has wo
-
I need app to help me to filter & hide columns in excel sheet?
Is there any app helps me to filter & hide excel sheet ?
-
Actual labour cost calculation
Hi Gurus, IN KP26, we have fixed lab hrs.From Table S027,we are getting lab cost for a particular production order.My user do not want lab cost and they want to delete it and lab hrs should be remain as it is in configuration. Pl advise how we can r