Qosmio X305 screen not displaying like my desktops LCD screen

My screen seems to be displaying dull images.
I'm kinda concerened, because it's an LCD screen, and its not displaying like my desktops LCD screen.
I put the brightness up, and that helped to see the images better, but they still are not of the quality they should be.
Is there a way to fix this? Or is that just how it is?

Many Desktop LCD Monitors can get very bright, much brighter than most notebooks. So it may just be how it is. Perhaps you could go to the shops and compare it to other X300's on display.
Try resetting or modifying the Contrast/Colour/Brightness settings in the nVidia control panel.

Similar Messages

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

Screen not displaying correctly. It keeps moving as the mouse moves

Screen not displaying correctly. It keeps moving as the mouse moves

Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac or iDevice you are using, what operating system, and what version of the application in question. Please remember to post in the forum relevant to your hardware or version of OS X.

My screen not display propely

i have problem wth my iPad2.the screen not display propely.pls help me

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

RESET OUT THE IPHONE IS A BLUE SCREEN, NOT REBOOT NOW OUT FLASHING BLUE SCREEN I CAN NOT USE, RESET OUT THE IPHONE IS A BLUE SCREEN, NOT REBOOT NOW OUT FLASHING BLUE SCREEN I CAN NOT USE

RESET OUT THE IPHONE IS A BLUE SCREEN, NOT REBOOT NOW OUT FLASHING BLUE SCREEN I CAN NOT USE

I have not researched further in solving this issue for a couple of months. Still using my iPhone 6+ 128GB with around 64GB free space, not dare to load more stuff at the risk of reboot loop. I am still at iOS 8.1. Anyone know would 8.1.3 solve the issue? Thanks a lot.

Why my MacBook Pro 15.4" did not come with a Unibody LCD Screen Glass Cover

Why my Apple MacBook Pro 15.4" did not come with a Unibody LCD Screen Glass Cover? The black glossy bezel around the screen.
Can somone please help me?

Did you get the anti-glare version? Or a really old MacBook Pro?

Utility folder icon not displaying like App folder icon?

Hi- noticed when I drag the system Utility Folder into the Finder Toolbar it does not display similar to the Applications folder - not the Sidebar, but the horizontal toolbar holding the view option buttons (as a favorite item). The Applications folder displays as the same "A"-type icon as in the Sidebar, but the Utilities folder displays as a folder, not the "X"-type icon it appears as in the sidebar. This seems nonstandard- I'd like to see what I can do about having it display in the Toolbar as it does in the Sidebar.
I know, I know, "Why?". I just need to, ok? Otherwise I won't stop thinking about it. Any ideas? Assuming this is the same case for everybody's system, not just mine. I would've posted this in the "OS X System" forum, but it's not really developer related. I'm also guessing this involves going into the icon resources, and making a change to match the resources for the Applications folder, but that's a blind guess. I did a similar change for the slider in iTunes to have it match the Quicktime slider, but not sure in this case, or where to look. Thanks!

To clarify: This is about how the Utility Folder displays in the Finder Sidebar vs. how it displays in the Finder Toolbar (both shown by selecting "Show Sidebar" and "Show Toolbar" in the Finder "View" pulldown menu.
Finder Sidebar, Finder Toolbar:
http://grok.lsu.edu/Article.aspx?articleId=5920
Any folder can be dragged into either space, and without using the Customize Toolbar option. Just drag and drop the folder.
Dragging the Utility Folder into the Sidebar displays it correctly, as its specialized, unique crossed-tools icon. However, dragging the Utility Folder into the Toolbar will not, unlike all other folders assigned with those special icons.
In the Sidebar, certain folders will display as non-folder icons. For instance, under "Places" the Home Folder does not display as a mini Home Folder icon, it displays as a little "house". The Desktop Folder displays as a mini-picture of a Desktop, the Applications folder displays as an "A" made up of a crossed ruler, pencil, and brush.
This is the same for the Finder Toolbar, when you drag one of those specialized folders into the Toolbar.
So, on the left side of a Finder window, you have the Sidebar, with its specialized icons (for certain folders, not all) and along the Toolbar (across the top of a Finder window, with its typical column-view buttons) you will also see those same (or other) specialized icons. In all cases, a folder's icon will display the same in the Sidebar as it does in the Toolbar. Except for the Utilities Folder.
If it isn't already, drag your Utility Folder into the Sidebar, and then, in that same Finder Window, drag it into the toolbar. Not the bar at the top of your monitor screen, but the toolbar of that specific Finder window. You should have the exact same result. The Utility Folder will display as a specialized icon in the Sidebar, but will display as a small version of its original blue folder icon in the Toolbar.
Message was edited by: Jack Gregory
Message was edited by: Jack Gregory

Interactive report: third screen not displaying

Hi Experts,
I am doing a interactive report in ALV grid...and my requirement is
when the user clicks on SPMON which is displayed on the initial screen the first screen
should display and in first screen when the user clicks LIFNR second screen should display..
I am able to display initial and first screen but second screen is not displaying...I am
pasting a pinch of my code please have a look and advice me..
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
For second screen : which is not working
FORM USER_COMM_1 USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC2'.
      IF R_SELFIELD-FIELDNAME = 'LIFNR'.
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM_1
Please advice
Karthik
Edited by: Karthik R on Apr 29, 2009 12:22 PM

Use both conditions in USER_COMM.
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.                      " Field name SPMON
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ELSEIF R_SELFIELD-FIELDNAME = 'LIFNR'.              " ELSE FIELDNAME LIFNR
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
        SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
Regards,
Gurpreet

Mac Mini does not display HDMI 1080i in full screen on TVs

I have a 1.66 GHz Intel Core Duo Mac Mini that I am having problems getting video to display 1920 x 1080 @60hz in full screen on my Sony XBR 1080p HDTV. The Mac is connected to the TV via a DVI to HDMI cable. The Mac recognizes the display as a "Sony TV"
When the Mac first starts up the entire TV screen is filled with the grey Apple startup screen, but when the Mac fully boots and gets to the desktop, the screen has shrunk so that it is slightly off the screen on the left, and has about 80% of the screen filled horizontally and about 90% vertically. I have tried all combinations of the overscan selection on the Mac and on the TV, but they make the image about 120% of the size of the screen so the top, bottom and sides are cut off.
I have tried 2 different 1080p HDTVs with the Mac Mini and get the same results for both TVs.
Now here is the thing that makes me believe that there is something funky with the Mac Mini. If I take my 2.16 GHz Macbook Pro 15" Intel Core 2 Duo and plug its DVI display port into the Same DVI to HDMI cable that is connected to the same Sony TV, it displays full screen with no problems.
What can I do to make my Mac Mini display properly?

Thanks for the ideas.
I did as you suggested, but the only 1920x1080 selection shown was one for "NTSC" which I would think is interlaced. This was after a reboot. All of available resolutions are labeled with "NTSC". When I look at the screen resolutions on my MacBook Pro when it is connected to the TV, they are labeled as "Interlaced". On both computers there are no progressive scan selections.
As an interesting note, regardless of what display resolution I select, the display area on the TV screen remains the same which is about 80% of the screen offset to the left. When "overscan" is selected, this mode enlarges to image to about 120% of the screen and cuts off the menu bar etc. However the MacBook fills about 98% of the screen in "normal" mode.
If there was a less aggressive Overscan mode or more aggressive normal mode, that would fix the issue.
Any other ideas on how to adjust this?

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

IPad air screen not displaying correctly

My iPad Air screen has recently started displaying with a pink hue in two of the corners, showing as a medium sized oval in one corner and a small circle in the other. There are also some vertical pink streaks that are less marked. It's really noticeable when the screen is displaying a white background. The only recent changes I have made is downloading the new IOS 8 update. There has been no trauma or damage to the iPad. It is still covered under the 1 year limited warranty. is there any way to fix this in my own?! Thank you!

Hello there katelynlc,
It sounds like you have some graphical anomolies on your screen that have a pink hue. If it is a software issue it will be resolvable by either first resetting the iPad:
Turn your iOS device off and on (restart) and reset
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Or backing up and restoring your iPad as a new device:
iOS: How to back up your data and set up your device as a new device
If restoring as new does resolve it, restore your backup and verify it still works.
If not, then the iPad will need service:
iPad Repair and Service - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

Group Folder not displaying on the desktop

Hi!
I have made a new and fresh installation of the OSX server 10.6 to a Mac Pro, due the extreme problems what our broken Raid Card caused us. I managed to install it okay, everything is working like before, except group folders.
I have proper AFP shares made for group folder and the mount shows fine. In the old stystem, I could go to group preferences on WGM, and on the Login / Items, select manage always just add the checkbox to "Add group share point", and the folder would display on the desktop for members of that group. Now it is not working. I actually booted from one backup of the last system and made sure that I have same settings than before.
What could be a problem here?

A work around.
On a client work station:
In finder, manually mount the share you would like to have show up. You may need to authenticate. This is fine. Do so with any users name on your system that has access to said share.
Open WGM. (still on the client work station) You'll likely need to install Server Tools temporarily.
Select the group or user you would like the MCX to apply to.
Click Preferences.
Click the items tab.
Click Always.
Click the plus button on the right side.
Select the mounted share.
Click Okay
Select the newly added line item. It'll probably look like this: afp://server.example.com_. With a kind: URL
Put a check box in the "Authenticate selected share point with Users login name and password."
Click save!
That should do it.

2006 Mac Pro + NEC 3090 - grey screen not displayed during boot

I have a September '06 Mac Pro 1,1 (Woodcrest variant) hooked up to an NEC 3090 30" LCD monitor, running OS X 10.5.7. Previously, I was using an Eizo S2110W 21" LCD; turning the monitor and computer on would cause the following to be displayed (in order):
1. Light grey background with dark grey Apple logo with spinning thing.
2. Solid blue background.
3. Leopard wallpaper.
4. Log-in dialogue.
Since using the NEC, the grey screen is not displayed at all: the display stays blank until the blue screen is displayed, and then the Leopard wallpaper and so on. This is using the 2560x1600 native resolution of the display, and has occurred using both 10.5.6 and 10.5.7.
If I change the resolution to 1280x960 and boot, the grey screen is displayed. If I change it to 1600x1200, I get weird corruption on-screen during the period when the grey screen should be displayed; for some reason, this includes part of the desktop wallpaper I was using before I rebooted.
Resetting the non-volatile RAM using Command-Option-P-R works for the very first time I boot the computer, though the grey screen is displayed at very low resolution. If I reboot from the log-in dialogue immediately afterwards, normal behaviour occurs - i.e. the blank screen.
The upshot of all of the above is that if I want to boot into Windows, or install OS X (e.g. when Snow Leopard comes out), I have to remember to boot into my existing OS X installation, change resolution, reboot whilst remembering also to hold down the ALT/Option key. It would be much easier if I could do away with having to change resolution.
I have tried connecting the monitor to a PPC Mac mini at 1600x1200 (it won't go any higher), using Tiger 10.4.11 (not sure of exact version - the latest). At this resolution, the grey screen is displayed.
Using a '08 MacBook Air (first generation) and the supplied DVI adapter, also at 1600x1200, nothing is displayed on the NEC until I get to the log-in screen. This occurs if the NEC is set to be the primary display or the secondary one - the only difference is where the log-in dialogue is displayed. I am not familiar with dual-screen behaviour, so I can't say whether anything is supposed to be displayed or not (i.e. does the grey appear on both displays?).
I have been in touch with NEC Europe support on this issue, who suggested it might have something to do with the 10.5.7 release. I know this not to be the case, as it was occurring prior to 10.5.7 being released.
Any ideas?

Put more of your hardware listed in your profile.
I looked and don't see you list your graphics card anywhere.
Graphic card it came with was either X1900 (watch for heat and dust bunnies and clogged vent);
OEM 7300GT (seems unlikely).
You could have replaced either with 8800GT or ATI 3870.
Require 10.5.2+ ideally 10.5.6+.
Some problems cropped up with 10.5.7. 10.5.7 doesn't work on some (many) 3rd party displays and stay with 10.5.6 if necessary until it is fixed or resolved.
But you say it happens with 10.5.6 also, and was doing so before 10.5.7? which makes your problem somewhat different or unique.
Zapping PRAM or NVRAM reset obviously shouldn't be needed repeatedly. And your graphics card probably needs to be replaced, or test with another card to rule it out.

Indesign CC does not display linked PDF image on screen

On Mac1 (10.6.8) When I imported a PDF file into Indesign CC 9.1 as a linked image - the image would come in as usual, however the image would not appear on my screen. Only a blank page box.
I can see the thumbnail image of the imported PDF in the links palette correctly.
However, on my page it appears as a blank box.
Selected Hi-res preview, and still it appears as a blank box.
I export to PDF, and the image is there as it should be on the exported PDF.
I tried the same image on Mac2 (10.8.3) with Indesign CC.
The imported image appears correctly on the page. (no blank box)
I saved that file and opened it on Mac1 that is having the problem displaying the image.
Mac1 again does not display the image, instead it is a blank box.
Tried the same image import in Cs6. No issue on either mac1 or mac2
What could be causing the imported PDF not to display on the page in Indesign CC?
Has anyone else come across this problem?

Hi
Are you still facing the same issue ?
Please refer to these threads for steps that you can try :
Edge Animation not working properly
Edge Animate not working in Muse Browser Preview, But works in Edge Preview
http://tv.adobe.com/watch/learn-adobe-muse-cc/integrating-adobe-edge-animate-graphics/
Thanks,
Sanjit

Variable Screen not display in Web

Hi all
When i execute the Query ZBP02_Q001 in Web, the Variable Input Screen of the Query is not display first,but display the content of the ZBP02_Q001 directly in the Web. All of the Varibale is not mandatory;
i am using BI 7.0;
Anyone can give a help!
Thanks in advance.

Hi Cao,
May be your infoobject are holding constants, which led to direct execution without the selection screen.
Inorder to get the selection screen, select the infoobject and make its settings as optional and it will be displayed in your selection screen.
So whenever you use optional for an infoobject, that specific infoobject alone will appear on the selection screen.
Regards
Thenmuga Selvan

Qosmio X305 screen not displaying like my desktops LCD screen

Similar Messages

Maybe you are looking for