QT7Pro - DVD's won't play - defers to Windows Media

I just purchased QT7Pro. Installation seemed to go well. Followed directions to start movie that I placed in dvd on computer. Won't open in QT7, goes to Windows Media Player. Access options in control panel shows both programs. Tried to set default to QT7, does not take. Any advise???

Since I don't use the MPEG-2 Playback Component my answers may be out of line. I play my DVD files using built in Apple software.
I suppose that you would have to first insert the DVD and then dismiss the default software application that wants to "play" it.
Open QT Player and navigate to the VIDEO_TS folder found on the DVD, open it using QuickTime Pro and click OK in the QuickTime dialog.
Others can chime in if my suggestions don't work.

Similar Messages

  • DVD Player won't play some DVDs

    My DVD Player won't play certain DVDs. Presumably all commercial DVDs should be playable in the software. Fox discs are a problem. I can get Player to turn on, but after the menu, the screen flashes a reading error, from which it could not recover. Yesterday I tried to play a Paramount disc, and nothing happened. The computer didn't even acknowledge that there was a disc in the tray. A Wolfe Video wouldn't read at first (I got a dialogue box that the disc was blank) but I put it in again and that time it played.
    Also, on a side note, I would like future editions of DVD Player to add the feature of allowing the viewer the ability to go backwards a frame at a time, as well as forwards.

    Hi, Doug.
    This is starting to sound like a different problem. Your original report seemed to apply only to specific DVDs. Now it's with all DVDs. Before we get into how to reinstall DVD player, let's try a few other things that are more likely troublemakers with DVD Player.
    1. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    2. Reset DVD Player. Peform all of the following steps before attempting to launch DVD Player again:2.1. Trash the com.apple.DVDPlayer.plist file in your Home > Library > Preferences folder. This file is the preferences file for DVD Player.
    2.2. Using Get Info, make sure you are the Owner and have Access of Read & Write on the following folders on your account:• Home > Library > Application Support.
    • Home > Library > Application Support > DVD Player.
    • Home > Library > Application Support > DVD Player > Settings.If not, correct the permissions accordingly using the Owner and Access pop-up menus in the Details sub-panel of the Ownership & Permissions panel of the folders' Get Info windows.
    2.3. Trash the contents of your Home > Library > Application Support > DVD Player > Settings folder.3. If none of the above sorts it out, let's see what Console can tell us: After the problem occurs, make note of the time, then immediately check the ends of these Console logs for clues that may have been logged when the problem occurred.
    4. Note that none of the above rules out the possibility that your optical drive has become defective.4.1. Can you burn DVDs, e.g. even data DVDs from Finder?
    4.2. See if the freeware VLC Media Player (nee VideoLan Client) can play the DVDs.Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • My 10.6.8 macbook pro's DVD player won't play a movie from Netflix.  The DVD does play on a 10.5 mb pro.  So DVD is ok.  Message says "not permitted" when I click play.  Is there a compatibility issue? Or something else?

    My 10.6.8 macbook pro's DVD player won't play a movie from Netflix.  The DVD does play on a 10.5 mb pro.  So DVD is ok.  Message says "not permitted" when I click play.  Is there a compatibility issue? Or something else?

    Hello:
    This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
    When the DVD is in the drive (and DVD players is open) click on File>get disk info.
    Barry

  • I burned an iMovie slideshow project to a DVD but, despite the mac saying that it would play on a mac or windows computer it won't play on my windows laptop. Any ideas-?

       I burned an iMovie slideshow project to a DVD but, despite the mac saying that it would play on a mac or windows computer it won't play on my windows laptop. Any ideas…?

    Download VLC Player
    http://www.videolan.org/vlc/download-windows.html
    Cheers
    DOn

  • I bought an album on iTunes, and one of the songs plays for 7 seconds, then it stops playing. I even tried to play it in Windows Media Player and it didn't work there either. How do I make it work or get my money back?

    Please help.

    Music purchased and downloaded from iTunes will not play in the Windows Media Player.
    Try re downloading the album > 
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Firefox 21 won't open mp3s in Windows Media Player

    I have set the program to file type option to both "windows media player" and "ask" and Firefox still opens the mp3 in a generic player in a new tab. MP3s played in the Windows Media Player popup window (after downloading) fine in the last version of Firefox 20.X. I've tried disabling the Microsoft WMP plugin (the only way to stop them from opening in a new tab using Quicktime was to disable the Quicktime plugin).
    The MP3 MIME settings in Quicktime have all been unchecked and the Windows extension settings all are set to Windows Media Player as the default player for MP3s.

    Great worked for me too, but.............its a win 10 how do i update to the latest version

  • Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

    Hi
    I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
    I hope that was clear.
    Thnx

    Hello kmanthie,
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    I worked on behalf of HP.

  • How do i play itunes in windows media

    How can I play itunes in windows media?  I can burn in windows media, but in itunes it says it can't find the device.  Please advise.

    You don't "play iTunes" in Windows Media. Both of these apps are media players: one native to Mac OSX-- iTunes and the other native to MS-- XP; Vista; Win7. The popularity of iPods initially, then iPhones and now iPads caused Apple to make iTunes+QuickTime available for Windows users who wanted to own and use those mobile devices but retain their Windows machines. The issue that you are asking is whether or not you can play your audio files in WinMedia instead of in iTunes. Yes, you can. You will need to launch Windows Media player and import into the library the audio files which are "living" in iTunes. Actually they are in the "My Music" folder of your home on the C: drive.

  • TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

    i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

    I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
    The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

  • DVD drive won't play brand new store bought DVDs - makes grinding noise

    I just bought my iMac last September and it was going great until the last month or so. First it started making noises when I inserted a new DVD and was slow to start, but it still worked. Then it started taking longer and sometimes rejecting the disc once - I'd re-insert and it'd be fine. Later it started rejecting more than once before it would play and now it seems to have stopped altogether and generally won't play any DVDs. I do watch a lot of movies, but even with a little more than average use it still seems a bit ridiculous that the drive would die or burn out in less than one year, right?? Has anyone else had this issue and/or resolved this issue? I'm new to Macs and haven't had to call the service people before but have heard others say they've had issues with the store service - should I call AppleCare instead? Any suggestions/tips/help would be appreciated. Thx.

    It happens. Just be lucky it's still under warranty and give Apple Care a call.
    George

  • DVD drive won't play

    Edit: Apparently it's not possible to list the maker of my DVD drive without being bleeped. I have edited the subject title.
    I have a Satellite A105-S4274 with a Mat**bleep**a DVD-RAM UJ-841S ATA drive. I've never used it for burning any media, only watching the occasional DVD. But now it won't play any DVD, nor will it play any music CDs. I've also tried using it to read CDs and DVDs I've burned on my desktop PC, but the drive won't read them, either.
    The DVD drive is recognized in the Vista device manager, which says it's working properly. It also shows up on Windows Explorer. However, when I put a disk in the drive, the light on the drive flashes as normal, but then stays on and nothing happens. When I use Windows Explorer to attempt to look at what's on the disk, it shows nothing.
    Is there any way to fix this problem? If not, what drive will work as a replacement?
    Solved!
    Go to Solution.

    It sounds like a drive failure.  Replacement drives are problematic since Toshiba doesn't publish a list of compatible drives and it can be tricky getting a replacement.  There have been cases where even the identical make and model drive fails to work because of firmware differences.  The easiest, but not the cheapest solution would be to buy a replacement from a Toshiba Authorized Service Provider.  Those usually run around $400.  You can also use Google and search the net for info.  www.sparepartswarehouse.com sells all manner of laptop parts and would be a good place to start.

  • Dvd disc won't play on dvd player

    Hi I,m quite new to apple ,i need help as i burnt a video off sd card onto dvd it plays great on my macbook pro but when i try to put it in my dvd player so i can watch it on tv the dvd player won't read it.  i have gone through 8 dvd,s trying to sort it.
    Any help greatly excepted .
    Christine

    I WAS NOT AWARE THAT I HAD TO USE A SOFTWARE, I RANG APPLE AND THEY TOLD ME TO DOWN LOAD VLC PLAYER BUT IT DIDNT WORK.
    I DOWNLOADED THE SHORT VIDEO FROM SD CARD ONTO DISC AND CAN PLAY IT NO PROBLEM ON MAC BUT IT WONT PLAY ON MY DVD SO I CAN WATCH IT ON TV. I HAVE USED 8 DVDS TRYING LOL  TRIED TO RING APPLE AGAIN BUT IT JUST HAD JUST CLOSED
    BEEN ON THIS SINCE 6PM LOL
    CHRISTINE

  • DVD videos won't play, although audio works?

    since upgrading to 10.8.4, DVD videos, including rental movies, discussions from teaching sessions, and conversions from home movies won't play, although sound is audible. Video player is "App version 5500.38.2; Framework version 5.7.1. I have rarely used DVDs on the machinge, but did work fine in past. Any suggestions appreciated

    What comes to mind is that the DVD player will only work with certain original Apple manufactured DVD drives.  (Licensing issue since Apple pays a license fee for the MPEG software on the DVD drive.)  Are you using the original built-in drive?  VLC doesn't care about the license but states that it is up to the user to insure proper licensing.  Look in About This Mac to see what information it has about the DVD drive.  Perhaps it is somehow sending the wrong information.
    Can you view MPEG movies on the Apple site.  For example the movie trailers.

  • DVD-R Won't Play

    I just switched to mac and love everything except for one thing. It won't play a DVD-R I created. It will play any other DVD. The DVD-R in question will play in any other DVD player, including my friend's Mac (running the same version of OS and DVD player).
    I tried calling support and was on hold for 40 minutes before the line went dead.
    Help?

    welcome to macbook forum.
    try to burn another one, for your dvd-r might be scratched and macbook is a bit picky on disk surface quality.
    Also open system preference > cd & DVD > when you insert video dvd > open dvd player selected.
    Good Luck.

  • Ripped DVD's won't play

    My G4 _*will play*_ commercially prepared Movie DVD's. But if I rip a movie (MacRipper) and save it on the hard drive, it won't play from the hard drive. A burned copy won't play either. I have no problem with any of this on My G5 IMac works and and or my Intel IMac. But not on the G4.
    Why is this?

    Will the MacBook start up using the install DVD that came with it? To test this, shut down the computer, start it up again and hold down the Option key on the keyboard. Insert the install DVD. If everything is working correctly, you should see an image of the install disk come up (possibly after clicking a curly arrow shaped refresh button) and you can click on it and continue.
    If the computer spits out the install disk, it would seem you have a hardware issue - probably the optical drive is bad and needs to be replaced. Contact Apple for service or carry it in to an Apple retail store (make an appointment first so you don't have a long wait at the Genius Bar) or to an Apple authorized service provider.
    Assuming your niece's use of the MacBook has been normal (not putting anything that is not supposed to go in there into the optical drive, for instance) this should be covered under the MacBook's warranty.
    Best of luck.

Maybe you are looking for

  • Setting the path in Windows98

    Hello, I'd like to run my java application on a computer with Windows 98, and not in the java bin directory. I'm familiar with setting the path variables in Windows XP. You go to control panel -> System -> Advanced -> Environment Variable -> and set

  • Log4j async appender and line number output

    Hello, I am trying to implement log4j in my application, and would like to log the caller class and the line number of the call. When I do not use async appender, the caller class and the line number are logged. However when I add the same appenders

  • Error installing itunes 10.5

    I was happilly using an older version of itunes with my ipod video but needed to update as I now have an ipod touch.  When the update started it stopped almost imediately and said update failed.  I have tried removing all apple components from comput

  • Compilation error- xws-security sample aplication for signing

    hi I tried to run the sample application (xws-security) in JWSDP 1.6 but i am getting the following error. [echo] Running wscompile.... [wscompile] C:\Sun\jwsdp-2.0\xws-security\samples\simple\build\server\WEB-INF\c asses\simple\PingService.java:10:

  • Sending error msgs through email and sms

    Hi, does anyone done on sending error msg file through email and sms. if so share some knowledge with me. thanks in advance