Quad display resolution?

I am thinking about upgrading from my current x200t to something with optimus to do the following quad set-up
ThinkPad Mini Dock Plus Series 3 Quad Display Configuration:
1st Display: Active ThinkPad display
2nd Display: VGA analog monitor attached to the ThinkPad Mini Dock Plus Series 3 - 170W (4338) VGA analog port.
3rd Display: DisplayPort or DVI digital monitor attached to the ThinkPad Mini Dock Plus Series 3 - 170W (4338) DisplayPort or DVI digital port (left side pair).
4th Display: DisplayPort or DVI digital monitor attached to the ThinkPad Mini Dock Plus Series 3 - 170W (4338) DisplayPort or DVI digital port (right side pair).
does this mean I can run the thinkpadp display, one 24" at 1920x1200 via VGA and two 30" at 2560x1600 via DisplayPort?

well the T410, T510 with Optimus can support that, i haven't heard may people using 2 x 30 inch WQXGA resolution + 1 x WUXGA. Most people i know whom this setup uses 3 x 24 inches.
Depending on what you do, you may want to try the newer T420, T520, which can support internal display + displayport out at WQXGA + WUXGA on the VGA without the dock installed.
The new W520 should also support optimus, but most official resources said that it support only 3 monitors.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

New Mac Pro/Yosemite lost display resolutions that were in Mavericks

After a 9 hour migration process from my old Mac Pro, late 2007 2.8Ghz Dual Quad core, to a new Mac Pro 3.5Ghz 6-Core, I have had issues with the display resolution I used on my old Mac Pro. They don't show up in the list of available resolutions, and now everything on my Dell 30" display is HUGE! How can I get the resolution settings back to where the old Mac Pro was?

In the System Preferences "Display" pane - do you have "Best for display" or "Scaled" selected for the problematic 30" Dell display. Based on your comments I'm guessing it's the "Scaled" option which should show you the list of all resolutions that it knows your graphics board can do. So what graphics board do you have in the new and old Mac Pro? It's listed in the "System Information" app (click on the Apple in the menu bar at the top of the screen, then hold down the Option key and then click on "System Information". The graphics board is listed in the "Graphics/Displays" option about half way down the list of Hardware items on the left of the page. Did you migrate the old graphics board in the older Mac Pro over to the new one or does the new Mac Pro have it's own? What exactly is the list of resolutions that are shown for your new Mac Pro with the Dell 30"?
Also I'm a little confused - on which system is the Dell 30" on now - the old Mac Pro or the new one? Which resolution setting did the Dell on the old Mac Pro used to be set at and what is it now on the new Mac Pro?

How to change external display resolution WITHOUT clicking "CONFIRM"?

I have a somewhat unusual situation. My MacBook laptop is actually now a ModBook (a pen-tablet computer), and as such I no longer have a trackpad attached to it. All of my inputs are via the stylus, tapping directly on the built-in display.
This works perfectly fine, except when I need to give presentations on an LCD projector (which is quite often lately). I like to use the projector as an external monitor, so that I can run the Keynote presentation on it while using my laptop screen as the presenter's display, with the upcoming slide, etc. If the projector doesn't give me an ideal native display option (sometimes, the aspect ratio for the 3 or 4 resolutions available in the Displays drop-down in the menubar turn out to be stretched or squeezed), then I, naturally, have to open the Display System Preferences and try out different resolutions.
The problem is, since my stylus only interacts by clicking directly on the built-in-display, I have no way of moving the cursor over to the external display when the dialog box with the "Click here to confirm change/You have 15 seconds..." message appears. So I can never click it ... so I can never confirm the new settings.
The workarounds I've used so far are:
- Mirror displays (not ideal, as I need the presenter preview of the next slide)
- borrow a mouse from someone (usually from a Windows desktop, frankly) and plug that in to briefly mouse over and click the confirm button
I'd love to find a software workaround that allows me to NOT mirror displays and also doesn't require me to carry around a mouse all the time (my laptop bag is already overstuffed...).
Thanks.

Fateh wrote:
I hope that my question is clear ... Nope.
How to change the display resolution of APEX ??APEX doesn't have a display resolution. "Display resolution" is an attribute of the device and user agent software used to view the APEX page.
What do you mean by "the display resolution of APEX"?
In other word, if an end user sees large elements on a pageWhat "large elements"?
then he/she zooms it outHow?
"Zooms" what—the entire page or a single "large element"?
How can I set a proper ZOOM for my app by default ...Meaning what?
And as usual, we're missing:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
You've been posting here for years. You know this basic information is necessary to understand and reproduce problems.
If you're looking for help it doesn't seem unreasonable that you make the effort to provide a full, clear but concise description of the problem or requirement.

Thinkpad Yoga - Insufficient external display resolution over the Onelink

My local Lenovo Partner just confirmed the data in "User Guide" of the TPYoga, that the external screen resolution will only be 1920x1200.
"User Guide" Page 10, http://www.lenovo.com/shop/americas/content/user_guides/tpyoga_ug_en.pdf
"Display resolution:
– LCD: 1366-by-768 or 1920-by-1080, depending on the model
– External monitor: up to 1920-by-1200, depending on the monitor model"
I mean what do I want the OneLink Dock / OneLink PRO Dock for??
Of cause to connect a large screen and this not with a worse ppi than the intern display. So I need at least 2560x1600
(we don’t even talk about all the disadvantages of a 16:9 screen, cause that’s off topic).
Idealy I expect of cause a 4k resolution possibility together with the OneLink Pro Dock and multi stream (daisy chain) possibility at the display port.
But 1920x1200 external graphic output can’t be meant serious for a 2000US$ device??

Ok, let’s accept that the new Thinkpad YOGA Manual includes misinformation.
Actually I’m sitting in front of my 2048x1152 Display which is connected to my 8 years old Asus Notebook via DVI. Does this old jalopy perform a higher resolution via DVI than the Thinkpad Yoga via “OneLink PRO Dock-DVI” does?
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/options/tp_onelink_pro_dock_ug_en.pdf
Page 13
(I’m guessing in the first line (behind "One monitor") it’s supposed to mean DVI instead of DP”
(1) Lenovo, are these technical details of the NEW OneLink Pro Dock also wrong like the Manual of the Yoga regarding the maximum resolution?
Would be very helpful for me to plan with correct information..
(2) And is it definitely true that I can't connect two displays at the OneLink PRO Dock with a higher resolution than 1920x1200??
That would mean I send the Thinkpad Yoga back and better stay with my 8 years old ASUS jalopy.. smileyfrustrated:

Leopard "Forgets" External Display Resolution

I have a 17" MacBook Pro C2D (Oct 2006 revision) that I use at work with an external display (Dell E197FP) that is connected to the laptop via the DVI-to-VGA adaptor. The Dell has a native display resolution of 1280*1024 @60Hz and this is set via the System Preference's Display panel. The problem is that quite often when I connect the display in the morning OS X (10.5.6, at present) "forgets" the resolution that has been set and reverts back to its default for the display, which is 1152*864 @75Hz. It is baffling to me that it keeps forgetting the selected resolution for the display, despite recognising it, and that it selects such an odd resolution as a default. This happens about once per week at the moment.
Does anyone have an idea what is causing this and how I can stop OS X from being so forgetful?

Are you getting one to extend your desktop? I don't, I use my MacBook with the screen off using my external only with a keyboard and mouse plugged in. I run my Late 2008 2.1GHz MacBook with a GMA X3100 using a 23" Samsung wide ratio no problem in 1680x1050. It is high resolution. Make sure you click "mirror" in Display Prefs. Be certain that you don't simply boot to both because the external will appear grainy and only be putting out the native 1280 X 800 13" MacBook resolution on the new big LCD. There are many different ways to achieve this. With the LCD on and hooked to the MacBook, turn the MacBook on then quickly close lid after the chime. Give it some time. After it boots to the external, I open the lid to provide proper airflow, some may argue it's not needed.

External display resolution

I have Dell up2414q monitor which is capable of displaying up to 3840 x 2160. But when I connect my 11-inch Macbook Air (the latest 2014 model), which is capable of 2560 x 1600, shows only 1920 x 1080. This is the highest resolution listed in display setting.
I'm using Display Port cable and enabled Display Port 1.2 setting on the monitor. I went to Apple Store and asked, but they had no idea what was wrong. My OS is 10.9.3.

Hi there gen2014,
You may find the information in the article below helpful.
OS X Mavericks: Adjust your display resolution
http://support.apple.com/kb/PH14388
You can connect a second display and adjust its resolution. Once it’s connected, click Scaled, then select a resolution. Press the Option key while you click Scaled to see additional resolutions for the second display.
If you continue to experience issues, take a look at the troubleshooting steps in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

External Display resolution problem after resetting PRAM

Gello, I've got Fujitsu-Siemens P19-2 monitor hooked up to my MbookPro and after resetting PRAM the correct display resolution disappeared from the "Displays" menu in System PReferences.
So did the refresh rate option...
What do I do?
I really need to change the refresh rate and the resolution, but the refresh rate button is grey and unclickable, and the resolution simply isn't there (I need 1280x1024).
REsetting PRAM and SMC didn't help.

After a couple of resets everything went back to normal

External display resolution changes after returning from display sleep

I often use an external display as a second screen with my Macbook Pro (OS X 10.8.2) However, when I return to the computer after the display has gone to sleep, the external display resolution changes when the display reappears. Then I have to go into System Preferences > Display and "Detect Displays" in order to return the external display to the proper resolution.
Does anybody know of a way for me to avoid having to do this every time my display sleeps?
Thank you,
Adam

I have the exact same problem.
I found the key combination ⌘ alt F2 also restores the proper resolution on both displays, however it's still a bit annoying

Highest dual display resolution for mac mini mid 2011

I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
I am going to connect the screens in the following way:
1x mini-dvi - HDMI to one screen.
1x HDMI - HDMI to the other screen.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Thanks in advance
Rich

According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
"Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
That should mean it should be able to support it, but I don't know : <
HDMI version
1.0
1.1
1.2
1.3
1.4
2.0
Date initially released
December 9, 2002
May 20, 2004
August 8, 2005
June 22, 2006
May 28, 2009
September 12, 2013
Maximum clock rate (MHz)
165
165
165
340
340[109]
600
Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
1.65
1.65
1.65
3.40
3.40
6
Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
4.95
4.95
4.95
10.2
10.2
18
Maximum throughput (Gbit/s) with 8b/10b overhead removed
3.96
3.96
3.96
8.16
8.16
14.4
Maximum audio throughput (Mbit/s)
36.86
36.86
36.86
36.86
36.86
Maximum color depth (bit/px)
24
24
24
48[a]
48
Maximum resolution over single link at 24-bit/px[b]
1920×1200p60
1920×1200p60
1920×1200p60
2560×1600p75
4096×2160p24
4096×2160p60
Maximum resolution over single link at 30-bit/px[c]
N/A
N/A
N/A
2560×1600p60
4096×2160p24
Maximum resolution over single link at 36-bit/px[d]
N/A
N/A
N/A
1920×1200p75
4096×2160p24
Maximum resolution over single link at 48-bit/px[e]
N/A
N/A
N/A
1920×1200p60
1920×1200p60
Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
N/A
N/A
N/A
N/A
1920×1200p60

Cannot set display resolution after upgrading to Mavericks

I have early Mac Mini connected to KVM stitch. Over the weekend I upgraded to Mavericks and it "dowgraded" display resolution from 1920x1200 to 1600x1200 and everythign looks streached. 1920x1200 no longer shows on the list in display properties (1920x1440 shows but it does not look good on my screen). I googled Option key trick and hitting "Scaled" while hold Option key does show some additional resolutions, but not the one I used to have.
Connecting Mac directly to the monitor allowed me to set proper resolution and after removing monitor and pluging mac back into KVM things "held" untill Mac goes to sleep or until reboots.
I am aware that my KVM switch does not communicate EDID but things did work just fine before upgrade to Mavericks.

Hello curtdav,
It sounds like you are getting a graphical anomoly when unplugging an external monitor. I recommend these troubleshooting steps from the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

I am unable to play a downloaded HD movie from iTunes. SD movies play OK. An error popped up saying something about the display not suitable for HD movies but now all I get is a blank window. I have tried changing the display resolution to no avail.

I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
Can anyone help me resolve this problem?

Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it. Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read... I sent on the PC setting to try to change the display resolution.

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it.
Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read...
I went into the PC settings and tried to change the display resolution. This changes the size of all the icons (not only Adobe) but it does not solve the problem when I open an Adobe application (Photoshop or Illustrator)... The PC is run under Windows 8.1 and my display resolution is 3200x1800 (but again, when I change the settings for a smaller resolution, only the size of the icons is affected. Once I open the software, the problem is still there, extra-small toolbars...). Help!!!

Anything before CC is not high-DPI compatible. Feel free to continue to experiment with your system settings.
Mylenium

Windows 7 display resolution problem on iMac 27"

Hi, I have an iMac 27" that is running bootcamp with Windows 7. The resolution on the OS X is fine, but on the Windows 7 side, it is messed up. The display resolution choices make the screen look all stretched and weird; I cannot select the same resolution as I have on the OSX side. The display drivers say that they are generic, so I tried installing manufactuer's drivers. That did not work since they couldn't detect the correct monitor. I've run software update on he Mac OSX side, but to no avail. Does anyone know how to fix this? Thanks!

updates for osx will not affect windows
in osx one can make a packet with all drivers required for bootcamp windows do that
and if you need drivers for windows download the mobile version what amd/ati and nvidia call desktop videocards
are not the type used in imacs they use the laptop versions

Cannot change display resolution when connected to external display

On my 2.0GHz 13" MacBook, I have no problem with the display resolution when connecting to external display/projector when I am running in Mac OS, everything work perfectly! But things start to get messy when I am running in Windows VISTA 32 (installed within the Boot Camp 2.1). Whenever I connect to any external display/projector via a MiniDisplay-to-VGA cable, the resolutions on both my MacBook LCD and external display/projector drop to 640x480. And i am not able increase the resolution in the Display Settings. Does this mean that I have not installed the latest version of display drivers? Or is it that Apple did not provide the VISTA 32 drivers (in Boot Camp 2.1) that is compatible with the Mini Display port.

Cool!
I'm glad you have it fixed.
Please resolve the thread so others can find your answer faster.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How do I adjust display resolution for Mac Mini?

How do I adjust display resolution for Mac Mini? Text does not look crisp. Using Samsung 27 inch monitor with HDMI input

Apple menu -> System Preferences -> Displays. Depending on your version of Mac OS X, it may be set for "Best for Display" in which case it should already be set at the optimum for your monitor, or it may display resolution options in which case you should set it for the native resolution of your display.
Regards.

Quad display resolution?

Similar Messages

Maybe you are looking for