Quality in SD

Hi,
For FG sales material i have a inspection type 10.I did quality planning through (QP01).in IMG i assigned inspection type to delivery type & inspection type to delivery category M (sample).now when my sales person is doing PGI system is not allowing him .& in QA32 i am not getting any lot .But system is showing error "ststus of inspection lot 1000001/partial lot 0000 dose not allow goods issue.note in Qp01 my usage is -6 (goods issue).
Manoj

Hi
1.This means lot is created.Check in MMBE.
2.also go to MB51 & check the document number.
3.Check In QA32 put material & Inspection type>excecute>take Usage Decision.
Regards
Sujit

Similar Messages

  • Master data is not getting displayed in the Report in Quality

    HI Experts,
    I have ZESP_Num as master for my transaction data.
    I have loaded the data in the Development and designed and checked my report. It is working fine.
    But after moving it to Quality. My report is not getting the master data.
    When I try to do right click manage ZESP_Num.
    I'm getting message like this.
    The data from the InfoProvider ZESP_NUM involved could not be checked
    Message no. DBMAN242
    Diagnosis
    A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
    Can anyone plz help me.
    Thanks

    Hi,
    Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
    Hope helpful.
    Regards,
    RAO

  • Can I return my new laptop to lenovo because of its quality problem?

    IBM is one of the best brand as I know, especially showing us not only high quality of products but the service.
    But now one thing happened to me, if I don't have this case I can't believe. I found there is something with the laptop(T61 Model 7658CTO) the same day when I got the new laptop on June 3rd, 2008. Then I call 800, a lot of 800 calls,at last I were told that I should contact send it back first if I were to get another new one. Three days later I got the box sent by Lenovo, and I return it back in terms of what the paper shown.
    Unfortunately the problems of the laptop still exist when I turn on my laptop after it repaired. What's wrong with my laptop, this is new one, I think IBM should provide high quality products.
    I don't know how to describe the weird sound , it sounds like two or more micphone opened clost to each other. It is very harsh.
    I want to get one new laptop from Lenovo because of the quality of product and customer service or can I return the laptop?
    I would appreciate any advice you can give me.
    Message Edited by hjwu1979 on 06-27-2008 07:18 AM

    Like Obama says... yes you can
    I did it last week because I bought an iPhone 4 as a wedding gift but then I changed my mind and wanted an iPad, so the bride could use it together with the groom (while the phone is personal).
    I returned the iPhone to the apple store and I paid the difference to buy the 32GB iPad, no problems
    I didn't opened the case, but the guy at the apple store told me I could have returned the phone even if it was opened. It must be undamaged tough.

  • Iphone 5S call voice Low quality.

    Iphone 5S  low quality call voice.  When I make a phone call , people in the other side said my voice is very small and disconnected. The voice is good when I am using the earphone at the same calls

    Hello tigertiger123abd,
    The following article can help sort your iPhone's built-in microphone.
    iPhone: Microphone issues
    http://support.apple.com/kb/TS5183
    Cheers,
    Allen

  • Questions on default print quality and print order

    I recently upgraded to CS 5.5, a clean install on a new Mac running 10.7. I've found two issues regarding printing from both Acrobat and InDesign:
    In both programs, if I go directly to print (command-P, then hit OK without changing settings), documents will print at my printer's default setting, which is for a high-quality photo on glossy paper. (I haven't figured out yet how to change that default.) I want it to print to my faster standard quality  setting, which is generally also the "last-used" setting. I can of course go into printer settings to fix -- each time I do that, my standard setting is already set in that window -- but I have to make that move every time I print.
    Previous versions of both programs (CS3) automatically went into the last-used or standard setting. How can I get that back?
    Also, print order hasn't been working as it did in CS3. Documents print first-page-first in CS 5.5, unless I check "Reverse order"; in CS3, docs printed last-page-first automatically, without checking any additional box, making documents easier to collate. Also, on many documents, "Odd pages only" prints the even ones, and vice-versa.
    How can I get the automatic reverse order and correct odd/even back in Indesign 5.5 and Acrobat X Pro?

    Hi Davis,
    Well, if you are able to log on the BPS application (thus, a Web Interface if I'm not mistaken) then it means that some user is logged on the ABAP-side. It is either a "personal" user or a technical (common) user, that is used for anonymous access.
    You will certainly be able to track down this user with the SM04 transaction.
    You should be able to add a button to the BPS page. One idea would be to call an URL with an ICF service behind that will be able to process the parameters contained in this URL.
    It will be this very ICF service that will call the BAPI.
    Try these links
    http://help.sap.com/saphelp_nw04s/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ea8db790-0201-0010-af98-de15b6c1ee1a
    Hope this helps.
    Best regards,
    Guillaume

  • How many times can you "Export - Quicktime movie" the same ProRes 422 file until it starts to lose quality?

    Lets say you are done with your project & you want an uncompressed copy of it as your master. If you keep importing it back into Final Cut Pro, & keep exporting (Quicktime movie), will it ever start to lose quality?

    I've never seen a number given, but would think it is very high.
    Apple describes ProRes here:
    About Apple ProRes
    And in that document says:
       "while remaining visually lossless through many generations of decoding and reencoding."
    I don't think I've ever seen degradation caused by recompression or multiple compassion, but as a workflow if you output a master file, then re-import it to add graphics and export that, you would only be 1 generation down from the master file. If you wanted to make multiple versions, you can always go back to, and re-import,  the master file and make the changes, then export, so all you exports stay only 1 generation down from the master file.
    MtD

  • Let us solve this Verizon Service Quality debate for good

       Motorola Droid here.
         I don't frequent this forum too often, I probably glance at it once a week or so, but it doesn't take a regular visitor to take notice that this forum is always peppered with 3G complaints, some more or less valid than others.  However, after reading through a couple different threads tonight I'm afraid I'm going to have to hop on the bandwagon and question my 3G speeds.
         First off, I saw somebody say that 90-100 dBM isn't very good.  I am always stuck at around 98 dBm in my home though, and when I'm out and about I find it never gets below the high 80s.  Is this normal?  Also in my Settings>About Phone>Status menu, it constantly  says I am on an "Network Unknown."  This occurs and remains constant despite any combination of settings, including  roaming being on or off, and whether or not I am on 3G, 1X, or WiFi.
         Speaking of WiFi...when I am at home I use my home router as opposed to 3G for obvious reasons, which is a NETGEAR N router, yet I still only average about 2.5 mbps when connected to it or any wifi elsewhere.  Yes, I have tried turning my routers security off, and yes, I do have it in b/g mode.  I have also done the 228 number thing, the disabling of voice privacy suggestion, turning roaming on/off, several factory resets, etc. 
        Basically I'm just curious to know if anybody else is having similar issues, and what your average speeds are.  Infact, I'm going to make a little form below this paragraph for anyone who is interested, and rename the title of this post.  Perhaps we can congregate enough responses to come up with an average and then determine whether we are receiving acceptable service or not:
    Phone model:________
    What is your...
         Average 3G download speed? _____dBm
         Average WiFi download speed? _____dBm
        Any other comments that are pertinent___________

    first...how do i check my signal and speed? do i NEED an app or is there somewhere on the phone to do this? (i've seen others talk about 85-95 dBM, but never knew how to check). let me know and i'll post the results.
    also, one other thing you can try....and i MUST stress that i know little about this, except that it seemed to have improved my quality (voice/sound....my phone sounded "muffled" on both ends) on both ends, but i'm not sure if it actually increased my signal strength?
    call ##778
    select "edit mode"
    enter the password: 000000
    go into the "cdma settings"
    change home page,"  "home orig," and  "roam orig"  from evrc to evrc-b
    hit menu and "commit modifications."
    from what i gather, evrc-b is better technology, but is not supported everywhere. so if you try this and your signal is worse (or gone) then you'll need to follow the steps to switch it back. you will also want to save these instructions to your phone in case you find yourself somewhere that appears to be getting poor or no signal, so you can switch it back.

  • Large pdf(40MB) with 600 pages color quality is poor if i print more than 1 or 2 pages at a time.

    I have a 40MB PDF file with over 600 pages of color images. If i print each page one at a time, there is no issue whatsoever with the quality, but if i print say 5 pages, the 4th and 5th page and any subsequent page will look like rubbish. In general, just not the same color quality as before. The Konica Minolta printer doesn't seem to be at fault here because like i mentioned, this problem does not occur if i print individual sheets, just if i print more than 5 or so.
    Printing individual sheets in this instance, however, is not a real solution because in all the job will have many thousand pages. What do i do? Any one here experience a similar problem?

    You were able to catch me whilst my Konica Minolta tech was here.
    This is my take on his diagnosis,
    The c353 while capable of quality output is not exactly a robust production level machine.
    Without the aid of a RIP, all the processing needs to happen either in memory or it may have a hdd. Does the machine have a hard drive?
    In either case, you are running out of memory.
    Changing the printers properties on spooling may aid in completing the job.
    He mentioned sending the job as raster. Print as Image from Acrobat's Advanced tab would do that, but I think you would cripple your computer doing such. Try it; be prepared to go out to lunch or something while it churns away.
    hth

  • A/P Credit memo after GRIN Quality Inspection

    Hi all,
    We have to implement GRIN Quality Check module for one implementation. What we have done in the add on that for one GRIN, we go to Quality Check Program where item wise we enter the Accepted Quantity and Rejected Quantity . Then for all the Rejected Quantity we move the items from Raw Material W/Hs (GRIN W/Hs) to Rejection W/Hs and then create the invoice for complete GRIN Quantity for all the items . We have thought  to return back the rejected items using A/P Credit memo which will both nullify the Invoice affect as well as Stock Affect . But there is a problem that we are encountering during A/P Credit memo :
    When we perform Copy From from A/P Invoice to A/P Credit Memo , all the details form A/P Invoice are copied don to A/P Credit memo , but we want to return the goods not from RM WHs but from the Rejection WHs as we had already moved the Rejected Items stock to Rejection WHs ,when we change the code of Warehouse from RM WHs to Rejection WHs , it removed the tax code from Tax Code columns for that row and later does not even allow to edit the Tax Code for that row without which we are not able to save the A/P Credit memo.
    please suggest the best way of implementing the complete scenario so that we could both be able to maintaining the separate stock of Rejected Items, Return it back after creating the complete Invoice . We also wanted to create the complete invoice after GRIN irrespective of the no. of items rejected.
    Thanks and Regards,
    Pooja Singh.

    Hi,
    Might be I have elaborated too much thats why I have not received any solution so far.
    Actually I just want to confirm one thing first, that we are working for GRIN Inspection as follows :
    1. GRIN
    2. Inspection of all the items in a particular GRIN
    3.Stock Transfer of Rejected Items to Rejection Locations
    4.Now we want to create Complete Invoice that is invoice for Complete Quantity irrespective of Rejected Qty.
    5.Now Returning back the Rejected Qty of items from Rejection Whs and Credit note for Vendor to reduce the due balance.
    But when I try to create A/P Credit memo from AP invoice I want to change the WhsCode from RM Whs to Rehection Whs which if done , Tax code disaapears and disables.
    What should be done.
    Thanks and Regards,
    Pooja Singh.

  • Error while creating Quality Plan

    Dear Experts,
    While creating the Quality Plan following error is coming -"Error occured when checking type "
    In the log of task list following error is appearing - "Op. 0060, CH 0060:char. iden % used for QDI several times in task list"
    Please give your valuable suggestion onto this.
    Thanks
    Sumit

    It means you are sending down the same characteristic to an external system like LIMS more then once. 
    I believe this is a warning.  Not a hard error but I'm not 100%sure.
    Craig

  • Error while transporting the request from quality to production of BI

    Dear all,
    When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
               Execution of programs after import (XPRA)
               Transport request   : RBDK904992
               System              : RBP
               tp path             : tp
               Version and release: 372.04.04 700
               Post-import methods for change/transport request: RBDK904992
               Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
               Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
               Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
               Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
               Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
               The errors affect the following components:
                 BW-WHM (Warehouse Management)
               Post-import methods of change/transport request RBDK904992 completed
                   Start of subsequent processing ... 20080406140407
                   End of subsequent processing... 20080406140408
               Execute reports for change/transport request: RBDK904992
               Reports for change/transport request RBDK904992 have been executed
                   Start of................ 20080406140408
                   End of.................. 20080406140408
               Execution of programs after import (XPRA)
               End date and time : 20080406140408
               Ended with return code:  ===> 8 <===
    Thanks in advance.
    Regards,
    M.M

    Hi,
    First try to figure out the object type from the text obtained by following steps above.
    Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
    After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
    Hope it helps.
    Regards
    Mr Kapadia

  • Error while transporting database index into quality system

    Hello,
    I am getting an error while transporting a new index in quality system.
    I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
    While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
    I retransported the objects using a new request. However I still got the same error.
    Please help.

    Navin,
    No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
    K.Kiran.

  • HP Officejet Pro L7590 - print quality issue

    We've had a lot of problems with this unit since day one.  It simply wouldn't work with our XP computers.  Thankfully it does work with our new Windows 7 computer.
    The problem I'm having is that I have to clean the printheads at least once, if not twice, before every print job if it hasn't printed anything recently (even an hour or two).
    Although we've had the printer for a while, it has hardly been used because it wouldn't work with our previous computers (and I gave up trading emails with HP support because the situation just got worse each time we tried something, not better).  The myPrintMileage function says we've printed just over 300 pages (and I can pretty much guarantee that at least 250 of those have been diagnostic pages trying to get it working, not actual print jobs). 
    The only advice I can find on the troubleshooting page is to replace the printhead/s.  Is that really the case?  We have already had to replace ink cartridges before we ever got the printer working.  If we now have to replace one or both printheads this machine is proving very costly to run.  I would be very disappointed to find we had had to replace all four ink cartridges and both printheads before we ever got the machine working properly. 
    I'd appreciate any feedback you can offer on this please.

    I've included a link below to help you troubleshoot rpint quality issues...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&tmp_task=solveCategory&lc=en&dlc=en&cc=...
    This document provides some system settings that may help fix the issue.
    Dave M.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee.

  • Thoroughly fed up with quality of service from BT

    Because broadband was so slow on our normal phone line I pay for an additional line dedicated to broadband. 
    The last time both these (BT) lines were working was 27th July!
    The main phone line died on 28th July and that was finally sorted out on 28th August. Immediately afterwards issues started with the other line, meaning broadband varies between very slow and completely unavailable (many times per day).
    An engineer has been round, but it looks like the issue is in the cabling. The main frustration is, I'm getting almost daily updates, but the quality of them is rubbish! The're either "your line should be fixed now" when it never is or "we're not sure what's happening - we'll ask Openreach and get an update for you tomorrow". That update is generally "it's fixed now" or "we'll get an update" again. I had a text two days ago saying they aim to fix it by 28/10 and then today I've had a text and phone call saying it's fixed (it still isn't). I've tweeted @bt_care but they're not contacting me when they say they will, so I'm at the end of my tether. 
    If I had any other options for my supplier I'd have left ages ago. We've lived in this house for 13 years and I'm pretty sure we've not had a clear year without any phone / broadband faults, and they've generally taken weeks rather than days to fix.
    I don't suppose anyone can help much, but it makes me feel better to vent!

    Hi SadGamerGeek,
    Welcome to the community and thanks for posting!
    Sorry for the problems you're having with your broadband speed and for the time it's taking to sort out.  I can help you from here.  Click on my username and under the section "about me" you'll see the link to "contact the mods".
    Whenever we've received your details we'll take it from there.
    Thanks a million,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Issue in Process Controlled workflow for Shopping cart in Quality system.

    Hello All,
    I ahve configured a Process controlled workflow in SRM 7.0  with custom resolver, and I am facing an issue taht the Workflow works well in Development but in Quality the approvers are dropped after SC is ordered in Quality system.
    The SC Workflow drops the approvers picked up from the Interface  method /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP and IF_EX_WF_RESP_RESOLVERGET_APPROVERS_BY_AREA_GUID of BADI /SAPSRM/BD_WF_RESP_RESOLVER. The approvers can be seen in the shopping cart Approval preview Tab until the SC is ordered.
    I have compared the OSS notes relevant for Workflow, all of them have been transported, Also I compared and checked general Workflow settings, BRF Config and  Process level  settings in Dev and Quality, everything is same.
    Also while debugging; the approvers can be seen in the decision set table in the create_process_forecast method of class /SAPSRM/CL_WF_PROCESS_MANAGER.
    Kindly let me know what else i can check to find the root cause.
    Thank you in advance for help!
    Regards
    Prasuna.

    Hello Vinita;
    Thanks for the input and sorry for the not so "ASAP" reply;
    From what I'm seeing in from your 2 screenshot, i strongly believe that the problem is even before the Z implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID (in which the FM i ZSRM_GET_USER_FROM_PGRP is called. I think the problem could be in the process level determination  ZSRM_WF_BRF_0EXP000_SC_APP100. Let me explain:
    In your  cases where not buyer is determined,  in the approval tab there is not even a process level for buyer approval. If the problem were indeed in the implementation  /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID  then the process level would be there, but the system will display, instead of the name of the buyer(if the buyer determination fails) a red label with the message:  "With the strategy "Buyer determination" an approver could not be determined (or something like that..please check the image at the end of the text)".
    I can propose a way to discard this: Implement the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS of class ZCL_BADI_SC_WC (in case you didn't know, in this method you can specify an "default" approver in case that the determination of approver in GET_APPROVERS_BY_AREA_GUID fails). The idea is to specify an default approval and see how it behaves:
    If the user you indicated in the method GET_FALLBACK_AGENTS appears as approver, then yes, the problem is arises from implementation GET_APPROVERS_BY_AREA_GUID, in which case it could be a data problem (peharps in pposa_bbp?). You could also check in TX SU53 with the users with this problem to see if there's a missing authorization objetc.
    If, in the other hand, the "default" approver is not shown, it means that the process level buyer determination is not even called, so you should check in more detail ZSRM_WF_BRF_0EXP000_SC_APP100 and /SAPSRM/CL_WF_PROCESS_MANAGER > Determine process restart –method ----- (i have never used this method, so i could not tell if  it could be the source of the problem).
    Also, you could implement the method GET_FALLBACK_AGENTS in this way so the default approver would be the WF administrator indicated in the customizing (or you could just append directly any user you want):
    METHOD /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS.
       DATA: lv_admin_expr TYPE swd_shead-admin_expr,
             lv_admin      TYPE swd_shead-wfi_admin,
             lv_admin_type TYPE sy-input,
             ls_agent      TYPE  /sapsrm/s_wf_approver.
       CALL FUNCTION 'SWD_WF_DEFINITION_ADMIN_GET'
         IMPORTING
           default_admin_expr = lv_admin_expr
           default_admin      = lv_admin
           default_admin_type = lv_admin_type.
       ls_agent-approver_id = lv_admin.
       APPEND ls_agent TO rt_agent.
    ENDMETHOD.
    Error of agent determination:
    Please let me know the result of the test with the implementation of method GET_FALLBACK_AGENT. By doing this we could ensure if really the problem is in method GET_APPROVERS_BY_AREA_GUID or before.  I just made the test in our system and I'm almost sure that you wont get the default approver, but i could be wrong. 
    Any question please let me know.
    Best regards
    Cristian R.

  • Lost quality in photo gallery

    Suddenly, the quality of the photos in my photo gallery went from great to really bad. Does anyone know why?

    If for the photos transferred from your computer, under the Photos tab for your iPhone sync preferences with iTunes, deselect Sync Photos followed by selecting Apply followed by a sync. This will remove all photos from your iPhone with a warning message provided indicating this will occur.
    Follow this by reselecting Sync Photos and the photos you want transferred to your iPhone followed by a sync to re-transfer the photos to your iPhone to see if this makes any difference.

Maybe you are looking for