Quality of my pictures after I burned a DVD out of imovie 11

I have created a new imovie project for our High School for their Basketball dinner and I just "shared" the project and created a DVD with idvd. The quality of my pictures is terrible..... I can't present this at the dinner. How can I get a better quality dvd???? HELP. The dinner is this weekend.

Hi
The quality of my pictures is terrible.....
There are minimum two major reasons to this.
A. DVD is as standard Low eg as old CRT-TV - No DVD encoding program can do better than this.
B. iMovie'08 or 09 or 11 - Makes things even worse by discarding every second line resulting in a quality loss of 50%
C. Rendering can also make things worse especially when using "Share/Export to iDVD"
and using transitions in the SlideShow project.
• iM'08 to 11 - Publish to Media Browser - in iDVD import from this
• iM up to HD6 - just close it and let iDVD import the movie icon (with a Star on it)
High Quality (suggestions)
• Make a Blu-Ray disk - with Roxio Toast™ incl BD-component, BD-burner + BD-disks
• Use Camera and show photos from this
Just some thoughts from Bengt W

Similar Messages

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

After I burn my DVD Video comes up instead of Menu

After I burn my DVD Video comes up instead of Menu. How do I get rid of this?

Go into the Map mode of your iDVD project and make sure there is nothing listed in the Auto Play bin at the left.
If there is drag it out and try again.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

After I burn a dvd it won't play in other players?

After I burn a dvd on my Mac, why won't it play in other players?

first, you might have better luck in the correct forum. this is for Mac Pro's
here's the one you want
https://discussions.apple.com/community/notebooks/macbook_pro
Do you want to burn a data DVD or a Movie DVD? If it's the 2nd one, then get iDVD or another movie dvd making application. Most computers don't have that capability
"naturally", you have to go out and get something that'll let you do that
JB

How do I burn a dvd from an iMovie?

How do I burn a DVD from an imovie?

Use iDVD.
Apple no longer sells it. Buy any version of iLife 11, 09, or 08 from your favourite software vendor and install just the iDVD app.
Amazon: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/

How do I burn a video onto a dvd out of imovie 11?

How do I burn a video onto a dvd out of imovie 11?
Also the program churns and churns, till I'm able to do something else. Why so slow? Is there any render button?

Here is a step by step on how to create a DVD from iMovie 10 using iDVD 7.1.2. If you do not have iDVD, you can probably substitute Toast (or one of the programs Pieter mentioned) everywhere I used iDVD (I don't have Toast so can't verify this).
1. Create a project in iMovie 10.0.1
2. Go to File>Share>File... and for Size choose Large 540P (960 x 540) and click Next
3. Choose a location on the hard drive to save the file to.
4. Wait for the blue circle activity indicator to finish.
5. In Finder, verify that iMovie created an MP4 file in the location specified in step 3.
6. Open iDVD and click "Create New Project."
7. Give the project a name and save it to your hard drive.
8. Drag the file you created earlier from the Finder into your iDVD project window.
(or go to File>Import>Video... and choose your video there)
9. Make any adjustments to drop zones, etc.
10. Click the burn button.
11. Insert a DVD and let it do its thing.
This produces a working DVD for me.
Here are my software specs:
OS X 10.9 Mavericks
iMovie 10.0.1
iDVD 7.1.2

Pictures are blurry when slideshow is burned to dvd using iPhoto, iMovie and iDvd. How do I correct?

I used iPhoto, iMovie, and iDVD... How do I create a slideshow burned to a DVD without getting blurry images when slideshow is played through DVD a player?

You created the slideshow using the built-in Ken Burns effect in iPhoto or iMovie? I've never found that to be up to my expectations; additionally, if the people or objects in the pictures have certain designs (in their clothes), using movement can blur them. I use Photo to Movie myself - to me it creates the smoothest movement in slideshows. Another possibility is the size of your images: did you increase or decrease their original size? And when you encoded it, what settings did you use? I use the Share > Quicktime > Expert settings and then choose these options:
I've found that these settings result in the most lossless conversion. After the new .mov file is saved to the desktop, I then add it to iDVD after creating a customized menu and theme.

After I burn a DVD I am unable to read it again

I have archived some files onto DVD's and after the disk is burned the icon comes up on the desktop. If I double click on the icon the disk seems to open and show it contains all the data I burned to it. However once I eject the DVD, when I reinsert it my computer just spits it back out after about 30 seconds. Did I burn the DVD incorrectly? Why am I unable to remount my DVD's after I have burned them?

"What brand of DVD media did you use?"
Memorex. Is there a superior media I should try?
Almost any brand is superior to Memorex when it comes to DVD and CD recordables. I'd recommend TDK, Maxell, Verbatim, or Taiyo Yuden.
That being said, this issue has been reported by many users and I don't recall anyone coming up with a definite solution for it. I think the issue is more prevalent with the DVR-106 drives, but obviously users with other models are experiencing it as well.

How can I burn a DVD of an iMovie 13 project using iDVD 7.1.2 version.

I have a late model iMac which came with iDVD. I use iMovie to make photo and movie projects and share them to iDVD to burn DVDs. I use these often and I love them, specially iDVD.
When Mavericks came out I updated and of course it changed iMovie. I just finished a photo project with music on iMovie and planned to transfer it to iDVD for burning DVD. This is a family project and I want to distribute copies to the rest of the family.
It turns out that I cannot use iDVD with the new iMovie version and/or Mavericks.
iDVD does not contain the buttons that it used to have on each theme in order to play the DVD.
I cannot drag the movie into iDVD.
What can I do so that I can use iDVD when I have an iMovie project to burn it on a DVD.
I can go back to the previous version of iMovie and still have Mavericks.
I do not know, I am lost. Why doesnt this work without any problems when updating the operting system. Apple should take into consideration all the previous applications etc when it makes an older computer able to update to more current system.
I appreciate any help offered.
Thank you

Export the slideshow out of iMovie via the File ➙ Share ➙ File menu option as a 480p Quicktime movie.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to burn a dvd created in iMovie with OS Maverics - why is it in MP4 format and not .MOV?

I have created a movie in iMovie, shared it and put it in a burn folder on my desktop, then tried to burn it. It seemed to work (the hard disc was spinning and computer told me when it was finished) but when i tried to play it on my Macbook Pro (which is where I created it) it won't play. It is in MP4 format. iMovie used to create movies in .Mov format. Is this the reason it won't play and what can i do about it?

Hi
A. making a .mp4 file then putting it onto a DVD (via Finder/DeskTop) results in a DATA-DVD - which can not be played by any (to my knowledge) Standard DVD-Player.
But if inserted into a window-PC and using VLC-player - I GUESS that it will play just fine.
B. To be played in a Standard DVD-Player You need to do a VIDEO-DVD and to do this You need a DVD-Authoring program (it is a MUST)
C. Things that use to go wrong are:
- Using cheap brands of DVD discs as Memorex, NoName etc - I only use Verbatim
- Using DVD+/-RW - usually do not work, DVD+R usually works BUT not on older DVD-players - I only use DVD-R
- BURN SPEED - as faster as more BURN ERRORS (WORSE) - in iDVD - Best IS NOT BEST AT ALL - I never go faster than x4 - most often I use x2
Reg Authoring programs:
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Free solutions:
Burn - a free alternative from Internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
Gives a fairly good resulting Video-DVD
Free DVD Creator.app - free from Apple Store
(very simple - Quality ?? not sure - looked problematic reg. Interlacing)
Yours Bengt W

My slideshows and menus look pixelated after I burn a DVD in DVD Studio Pro

Hello to all! I'm new to DVD Studio Pro and this posting. I have finally finished setting up my DVD, and it looks great in DVD Studio Pro. However, whenever I burn a final copy, the menus and every picture in my slideshow looks pixelated and crunchy. I'm pretty sure I have all my settings right, I had help setting up my project by a guy who creates films and promotional shorts in DVDSP all the time. The pictures/menus are jpgs (original size is something like 1800 pixels, 180 dpi). I have tried saving them smaller (720x543) then importing them. I have tried saving them as tiffs and importing them. I have tried saving them smaller AND saving as tiffs and importing them. I have tried different media types. I have gone into "menu" under DVDSP Prefs, and changed the Final Rendering from "hardware based" to "software based". Nothing works. I don't know what else to do. I just feel like DVDSP is "compressing" the crap out of these things for no reason at some point, and I can't figure this out. They do look lovely in the simulator though, it's only when I play back the burned DVD that it looks terrible. Am I overlooking something very simple? Please help! I really appreciate any thoughts people have on this.

Hi JenRem, another idea you may consider is to export your content prior to DVDSP3 workflow as follows:
• set destination resolutions for your DVD as 576x720 (PAL) or the non pal version (480 x 720) and
• export ain APPLE ANIMATION CODEC (this is the thing that may fix you issue maybe).
I base this suggestion on some experiences in 2005-2006 when making a DVD title from micr$oft's powerpoint .app. I just wanted animation (transitions) slides in a DVD for mat with an audio track and "stop on chapter".
I feel the same these days with a workflow using KEYNOTE.app - just export the QT in APPLE ANIMATION CODEC at the correct res for the DVD SP3 input.
I can't account for the look of your menus though.. perhaps another unrelated issue.
I noticed that exporting as a QT movie looked ok until I noticed dreadful compression artifacts in the final M2V after the DVD was encoded.
Additionally, I noticed somilatr issues when using content created by MOTION.APP into a DVD SP3 workflow when letting DVD SP3 do BACKGRAOUND or BIULD encoding.
SO.. simpe rule for me is to always use APPLe's ANIMATION CODEC as the input source for any CGA type stuff.
Naturally the objects are rather large when using the ANIMATION CODEC so just delete these transient objects when your work in comlete. You can always create them again as you know.
varies to taste I image but always works for me.
worth a try!
w
Hong Kong

How do i print out my picture after scanning it. it comes out way to small

after scanning my picture i print it out and it comes out way to small

VisionAiry wrote:
If you print the scans and they come out too small, it may be that you have a setting off when you scan it in. To resolve this problem completely, you could simply make a copy instead. But in order to assist you with this, I will need to know a lot more information.
1. What kind of printer do you have (Officejet 8600, Photosmart C6380, etc)?
2. What kind of computer do you have (Windows 7, Windows 8, Mac OS 10.8, etc)?
3. What software/program are you using to scan (HP Scan, HP Solution Center, Paint, etc)?
4. What program are you using to print the scans (Windows Picture Viewer, Photoshop, etc)?
5. What is the file type of the scan (.pdf or .tiff)?
Make sure your scan size is equivelant to the page you are scanning, resolution is set to at least 600 dpi, the item type is set appropriately such as to document since photo will make the image smaller, and go to advanced settings to check file size is not set to "Smallest."
I hope that helps. If not, I will need to you to answer the questions above please or I will not be able to help you. However, I have provided all the necessary information above regarding an HP printer on a Windows PC using the HP Scan.
Let me know if I can be of any more assistance. I'm happy to help!
I have the same problem. I have a HP Photosmart 7525 printer and work with Windows 7. I just want to copy a photo and it keeps coming out much smaller. I just put the photo on the scanner plate in the corner, choose the copy icon, and out comes a small picture in the corner of my photo paper,.There must be a setting somewhere but I can't find it. Can anyone help me?

I have extended video footage taken on my ipad that I need to burn to dvd. Tried imovie and final cut. Final Cut rendering time was extremely long. What is easiest way to accomplish my goal?

I am a video technology teacher and coach at a high school in NJ. I have footage of a basketball scrimmage that I need to get from my iPad onto a DVD. I tried importing it into iMovie without success. I have imported it into Final Cut Pro but the rendering time makes the process very cumbersome with 7/8 hours of rendering time to create a quick time file to then use with iDVD. Is there a quicker way to accomplish this.

The Mac does not come with a Blu-ray burner. So you would be burning a Blu-ray compatible file to a standard DVD-5 or DVD-9. Neither of which are ideal for authoring Blu-ray content.
Do an exhaustive search online about Blu-ray authoring and disk creation. This is not something for the hobbyist video creator (and I say hobbyist in the sense that you're not creating thousands of copies for mass distribution, so no one take offense.)
Blu-ray is expensive and requires a lot of planning and prep to do it right. But you can't burn an official Blu-ray disc on a Mac as they stand. And, Compressor doesn't burn discs, it only creates files. DVD Studio Pro would be the app that would burn the Blu-ray disc, and DVDSP has not been upgraded since long before Blu-ray came on the scene.

Quality of my pictures after I burned a DVD out of imovie 11

Similar Messages

Maybe you are looking for