Quality of service

I had internet services with verizon when i lived in new york and i absolutely loved it. The service was the best, the customer service was excellent. Now that I have moved to the Atlanta metro area there is no available coverage from you in this area. Are you planning on providing services in this area at anytime in the near future? If so you definitely will not have any competition, because the quality of service is horrible by all the providers in this area. HELP!

I have not hear of Verizon (other than wireless) in Georgia at all....
Best of luck
Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

Similar Messages

  • Quality of Service and Jitter issues

    I am having poor quality of service (36%) and Jitter issues (36ms).  I called Verizon Fios technical support and was told that my connection is fine and that it must be a vendor issue.  Only vendor I'm having an issue with is Verizon.  If I can't get someone from Verizon that knows what QoS and Jitter is on the phone to help me troubleshoot this issue I'm going to have to cancel my service and find a provider that has someone technical providing tech support.

    Upstream jitter
     35.7 ms
    Downstream jitter
     6.0 ms
    Upstream packet loss
     0.8 %
    Downstream packet loss
     0.0 %
    Upstream packet order
     100.0 %
    Downstream packet order
     100.0 %
    Packet discards
     5.1 %
    MOS
     3.4

  • Quality of Service :Qos from Cloud Console 12.1.0.4

    Hello,
    After install a two node RAC  with 12.1.0.2 and a Cloud Console 12.1.0.4 , I'm trying to Access to the Quality of Service Management option, from Cloud GUI.
    But, to choose Dashboard or other options, appear this error:
    Error
    :Cannot connect to Quality of Service Management Server: Error while getting remote MBeanServer for url: ormi://rac1:23792/default
    Specify Quality of Service Management Credentials
    Specify the credentials to connect to Quality of Service Management Server.
    Is necesary start any agent?
    Which will be the correct credentials? Grid user?
    Many thanks
    Arturo

    Hi,
    IT should be Enterprise manager platform,
    --> Please check the OMS, Agent status,
    For OMS:
    export the OMS_HOME=
    emctl status oms -details
    for Agent
    As installed user : oracle
    export the AGENT_HOME
    emctl status agent.
    Pls try to clean shutdown and restart the OMS
    emctl stop oms -all
    make sure no oms process is running .. ps -ef | grep -i oms
    emctl start oms..
    =====
    select OWNER, TRIGGER_NAME, TRIGGER_BODY from DBA_TRIGGERS where trim(TRIGGERING_EVENT) = 'LOGON';
    If this returns any values, disable the logon trigger and attempt to configure again.
    ===
    Regards
    Krishnan

  • Quality of Service with WRT610N and Vonage

    I'm trying to get Quality of Service working with my WRT610N and my Vonage device.  The WRT is connected directly to my cable modem, and the Vonage device is connected to Ethernet port 1.  I've set up the Vonage's MAC address on the QoS tab to be priority "High" (done by selecting the "Voice Device" on the Category dropdown).  Additionally, I've set my Vonage options (on the Vonage website's page for my account) to use the highest bitrate (90 kbps, I think).  No other QoS settings have been made.
    However, the router doesn't seem to be enforcing QoS at all.  If I do any kind of surfing at all (dragging around on Google maps to load new satellite pages is a good test), the voice quality on an ongoing Vonage call becomes very choppy.  Do I have to do something else to ensure that the Vonage device gets highest priority?
    Solved!
    Go to Solution.

    Yup, it should work. Been working with these devices lately and the only way to get a good connection from it is by connecting the Modem and the VONAGE then your router. COMCAST is alsready using smart modems so it should always recognize any devices connected to the modem. You can also try leaving the devices OFF for a minute and turn ON the devices, first the modem and wait for another minute then your VONAGE and wait for another minute and then your router.
    Please post if it worked on not...
    Regards,
    Lord Maxthor

  • Setting Up Router Quality of Service

    I need to set limits to specific IP's or devices in my house using the internet. I heard that "Quality of Service" on the router was the best way to go. I checked it out on my router but it is very confusing. I have no idea how to set this up and I work with computers for a living. Can anyone help me configure this?

    Hi SadGamerGeek,
    Welcome to the community and thanks for posting!
    Sorry for the problems you're having with your broadband speed and for the time it's taking to sort out.  I can help you from here.  Click on my username and under the section "about me" you'll see the link to "contact the mods".
    Whenever we've received your details we'll take it from there.
    Thanks a million,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Change "Quality of Service" EOIO to EO for a XI Purache Interface in EBP

    Hello Colleagues,
    we have a PO interface in place but some problems with Message processing at Adapter. To solve the problem we try to change the Quality of Server EOIO to EO but the Quality of Service comes from the EBP system at XML Message header.
    Please, in that location on the EBP system are we able to change the Quality of Service?
    Many thanks in advance!
    Jochen

    Hi Barry,
    The EBP system send POs (also calalog messages) via integration engine (SXMB_MONI on EBP) to the XI system (Integration Server) and the XI system sends the messages out to the Vendor via SOAP.
    The messages which are send by EBP are with QOS EOIO at message header.
    Regards,
    Jochen

  • Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?

    Hi,
        We are building an IDoc to File scenario in SAP PI 7.1, where a single incoming idoc will create three different output files. Also files must be created in target server in a specific order.
        Our first idea to ensure that files would be created following a specific order was that Message mapping (in Java) build target payload with all three files following expected sequence.
        In addition, receiver file/ftp adapter is setup with a dynamic variable to create each file with a different filename adding also timestamp.
        Testing the scenario, we see that three files are created in target server but when we sort them by creation date, it seems they don't follow always same sequence.
        Sometimes adapter creates File1, File2, File3; next time it created File2, File1, File3 and so on.
        Our problem is that files must be created always with a specific order and we cannot use BPM. Does anyone know if a receiver file/ftp adapter can be setup to create files following specific sequence (EOIO)?
        I know that sender file/ftp adapter can be setup with a quality of service, but I didn't find anything similar for Receiver file/ftp adapter.
        Suggestions will be welcome.
    Kind Regards,
    Aitor

    Hi,
         First, thanks all of you for your quick answers. They were helpful because we learnt a new configuration setting.
         We tried your suggestions but they didn't really fix our problem.
         Finally interface has been re-designed and we will not have to apply this logic, so no issue from our side.
         However, let me continue with this topic in case that somebody else will have the same issue, then it will be able to review this thread.
         When adapter created the files in the target directory (windows server), files had the expected timestamp in each filename. However, if we sorted windows directory contents by "Date Creation", files were sorted different that timestamp shows in the filename.
         For example, adapter created following files:
    File1_20090325-115117-169
    File2_20090325-115117-174
    File3_20090325-115117-180
         But when we sorted windows folder contents, files were sorted as follows:
    File2_20090325-115117-174
    File1_20090325-115117-169
    File3_20090325-115117-180
         It seems that timestamp was pre-assigned by the adapter, but when adapter created the files, it did it with a temporary name and finally assigns the filename. If a file size was bigger than other, maybe it takes more time and windows creation date is higher.
         If so, it means that adapter is not following same instructions as itu2019s indicated in "maintain order at runtime" checkbox.
         Do you know if there is any way where we can push also the order in the adapter as we did in interface determination?
    Regards,
    Aitor

  • EOIO Quality of Service

    Hi guys,
    We have developed a File-XI-Idoc scenario, which works fine.
    The problem is that we want each file that is found in the folder where XI reads files, to be processed first and the corresponding Idoc that is produced from the mapping to be posted in receiver R/3 system first.
    In order to achieve that we have used EOIO QoS in processing parameters of sender file communication channel. Although, files are processed by XI one by one, since they are put in the same queue, it is not guaranteed that Idocs are posted to R/3 in the same sequence,
    We had a case that Idocs were posted exactly at the same time in receiver R/3 system and the one that should be processed second was processed first. The second Idoc (that should be processed first) was locked due to concurrent modification of the same material.
    Is there something else that I can do in receiver Idoc adapter, for example??
    Evaggelos

    Use the Queue Processing option of the receiver Idoc channel
    Queue Processing
    If the function module IDOC_INBOUND_IN_QUEUE is to be used, set the relevant indicator. It is used for IDocs that are serialized by queues (quality of service is EOIO). This module is only available in SAP Web AS 6.40 and higher. If it is not available, the function module IDOC_INBOUND_ASYNCHRONOUS is called. The indicator only takes effect in SAP systems Releases 4.0 and higher. Calls for the queue processing function module are placed in the qRFC queue.
    Regards,
    Prateek

  • RFC TO SOAP  - Quality of Service

    Hi,
    i see that my RFC to SOAP test functioning properly. But in Exactly Once mode. In RFC Sender adapter and SOAP Receiver adapter there is no configuration tab to change "Quality of service". 
    Is it possible to change the mode?
    Kind Regards,
    PM

    It is not possible to set the QoS at Channel leve for RFC receiver.
    Have a look at this thread: tRFC & qRFC
    for SOAP, look at this discussion: Re: In what QOS does the receiver SOAP adapter work BE or EO?
    Regards
    Ramesh
    Edited by: Ramesh P on Dec 30, 2011 1:17 PM

  • Sender JMS Adapter with EOIO Quality of Service

    Hi,
    I have a sender JMS adapter with a quality of service as EOIO. In the SAP help it says that I need to specify the "Processing J2EE Cluster Server (Cluster ID)". Just wondering how I get this value? Does anyone have an example?
    Thanks,
    Krishneel

    Hi,
    Please go through the bleow Wiki:
    http://wiki.sdn.sap.com/wiki/display/XI/FAQ+J2EEJMS+Adapter
    http://help.sap.com/saphelp_nwpi71/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
    Thanks,
    satya

  • How does the quality of service in India compare to the United States?

    I am currently in India and 12 hours from the closest Apple service center in Delhi.  After the monsoon rains started my computer started acting up.  At first some keys seemed to stick and I was able to solve the problem by attaching a USB keyboard.  Lately the computer started crashing and then having trouble starting up again (an internet search suggests this could be a problem with the RAM).  If I left the computer for a while it would start up and operate well for a bit but eventually crash again. 
    I took the computer into a computer repair shop here and he said that I should wait (3 months) until I go back to the United States rather than go through the trouble of traveling to Delhi to get the computer repaired.  He also said that the quality of repairs is much better in the US.  For example, in India they will put in second hard refurbished hardware whereas in the US they will use new hardware.  The repairs in India will also take much longer than it would in the US.  He recommended I get a cheap PC from him to use while I am here and get my mac repaired when i get back to the United States, he would then buy the computer back when I left.
    I was wondering if anybody could share their experience or knowledge of the quality of service in India.  Thank you.

    And another quote from the fine manual:
    Re Slideshow:
    Rendering Preview Images
    Aperture renders preview images in four situations:
    When a library is upgraded—provided that the “Create previews for existing images” checkbox is selected in the Welcome to Aperture dialog
    When an image is imported, or a version is created, rotated, or adjusted—provided that the Maintain Previews item is selected in the Library Action pop-up menu (with a gear icon)
    When you Control-click the library, a project, or an image selection and choose Update Previews from the shortcut menu
    Immediately before a slideshow, if the previews are not up to date, and the slideshow preset uses the Best quality setting
    When rendering a group of preview images, Aperture uses the current application preference settings for compression quality and picture size, not the settings that were specified when preview rendering began. For example, if you have the quality set to 6, and then halfway through rendering you change the setting to 8, the previews that have not yet been rendered will be compressed at setting 8. Previously rendered previews are unaffected.
    So, a high quality slideshow will require high quality previews, and indeed Aperture will render previews before rendering a slideshow, if the preview quality is not sufficient.
    Regards
    Léonie

  • Quality of Services "Exactly Once in Order"

    Hi,
    I have several integration using iDOC output R / 3.
    This integration into the Integration Builder them removed brand "Maintain Order At runtime" (Quality of Services - Interface Determination) to be executed in parallel, but when they reach the engine J2EE appear with the Quality of Services as "Exactly Once in Order."
    Why this happens with iDOCs? . With RFC do not have this problem.
    Best Regards
    Julian.

    Hi
    I have been reviewing the integrations that run in parallel and gave the impression that really do not run in parallel (Quality of Services "Exactly Once"), but that the channel receiver is taken so that the previous interface ends of inserting data into the receiver.
    If open the message and revise the log, the first message that arrives is in this state:
    "JDBC adapter receiver channel JDBC_XXX_YYY_Receiver: started processing; Party, service ZZZ_BS "
    But the following is not enough to reach this state and it is with this log:
    "Receiver JDBC adapter: started processing; QoS required: ExactlyOnce "
    One step before the first message, only runs the next step when the first message ends to be processed by the adapter.

  • Quality of service (QOS) is disabled in the HTTP service.  Unable to tur...

    Hi,
    "Quality of service (QOS) is disabled in the HTTP service. Unable to turn on QOS features." this message is seen and server restart itself. Why this occur?
    Thanks..

    That message is logged when you have QOS disabled. Check http://docs.sun.com/source/817-1831-10/agsnmp.html#wp999778 for information on enabling QOS.
    However, the server should not crash/restart. Please describe the steps to reproduce the problem.
    Message was edited by:
    Arvind_Srinivasan

  • Changing Quality of Service in Receiver Adapter

    Hi,
    We have a scenario where hundreds of messages for the same interface is sent to XI and written to one file on the receiver side.  We do not want to change the QOS (Quality of Service) to EOIO (Exactly Once in Order) on the sender side nor do we want to use BPM due to performance issues.
    Is there any way to change the QOS to EOIO after the mapping is complete?
    I tried changing the QOS (DeliverySemantics) using a adapter module on the receiver adapter.  In the audit log, I can see that the QOS has been changed to EOIO and assigned to the correct ConversationId, but the messages does not follow the EOIO process.
    Any help is great appreciated.
    Thanks.
    Best Regards,
    Duke

    Here is more detail on the scenario. 
    Hundreds of messages come into XI from R/3.  One message is split into multiple messages by using the Extended Interface Determination.  These messages are written to a file (each message has its own file).  The file adapter is set to append. 
    The issue we are facing is that when hundreds of messages are processed simultaneously, it triggers an error when attempting to write to the file (locking issues).  It then has to wait and retry, which adds to total processing time.  Due to the time sensitivity of these interfaces and the errors that are raised, we would like to change the QOS to EOIO on the receiver side (when it writes to the file) so that it does not have to wait and retry.
    The Maintain Order at Runtime is checked in the Interface Determination.  Once it gets to the adapter framework to write to the file, it has a QOS of Exactly Once, which is carried over from the sender.
    We do not want to change the QOS on the sender side, but only on the receiver side.
    Any thoughts?
    Thanks.
    Best Regards,
    Duke
    Edited by: Duke on May 29, 2008 5:11 PM

  • How to determine quality of service of communication between XI and R/3

    Hi All,
    Suppose we are sending data through R/3 to XI using outbound abap proxy to XI. My query is how do we determine which quality of service (EO or EOIO) will be used for this communication. I have seen normally it is EO ( or BE, in case we are using execute_synchrounous function).

    Q0S:
    http://help.sap.com/saphelpnw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
    adapter types and QoS:
    http://help.sap.com/saphelpnw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
    http://help.sap.com/saphelpnw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
    http://help.sap.com/saphelpnw04/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm

Maybe you are looking for

  • Want To Switch Back From iOS 7 to iOS 6

    So, I just updated my iOS software yesterday on my iPad 2 to the latest version, iOS 7, from the previous iOS 6. There are four or five decent new features, but FAR too many that I don't like about it... To name a few: - in iOS 7, the user-photos scr

  • Can rented movies be on more than one device at a time?

    Can rented movies be on more than one device at a time?

  • CS4: 32 or 64 Bit? How do I know?

    I've been testing CS4 on Win7 Ultimate 64 bit. I open files from Bridge, and I expect that they are opening in 64 bit. But I have come to realize that I cannot be sure. AFAIK, they do. Today, I went exploring: How to use the 32 bit version. As expect

  • IE saves file in different name(ex. some[1].somthing.txt ) why adds [1]?

    I am streaming the file content from servlet. My header & content type setting looks as follows. String downloadType = "application/octet-stream"; res.setContentType(downloadType + "; name=\"" + fileName + "\""); res.setHeader("Content-Disposition",

  • "Closed Clam" question

    I use the MacBook Pro attached to a HDTV. My question is.. If I have it in Closed Clam mode for a extended period of time will this hurt and damage the MacBook Pro ?