Quality Setting for exporting from After Effects To Final Cut

I've created an animation in After Effects for Final Cut. My Export setting are Quicktime Format Options are RGB, Millions of Colors Pre-Multiplied (Matted)
Although the font images are clear in After Effects I'm getting pixelized font images on the final product. See below
Here's the image before in After Effects before I attempt to render the movie
Quite a difference as you can see. Any suggestions for setting coming out to clear up the problem?

Michelle, are you able to get to the point in the screenshot below? Is ProRes an option there? Does animation or Apple Intermediate Codec show up? Thos might be a couple alternatives if ProRes is unavailable.

Similar Messages

Exporting from After Effects to Final Cut Pro

Hi
Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
Thanks for any help!
Matt

You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
Hope this helps.

Trying to Keep an Alpha Channel From After Effects to Final Cut Pro

I've created a nice little transition in After Effects that uses an alpha channel. When I export it from AE I save it as a Quicktime movie with RGB + Alpha.
When I drop it on the timeline, though, in Final Cut the bar above it turns orange and therefore it plays very jerky. It makes it hard to tell if the transition is looking like it should without exporting first.
I tried converting to ProRes, but then the alpha channel is lost and so the transition is useless.
Does anyone have any ideas on how to get my very short transition clip to play correctly on the timeline without losing the alpha channel. Any suggestions would be much appreciated.
Thanks,
Ray

You need to render it in the sequence. CMD R.
You're working in +Unlimited RT+, so the orange bar means that it is unrendered and FCP will try to play it back as well as possible, given your hardware specs.
When you render it, it will take on the compression codec of your +Sequence Settings+, and play in real time.
Have a look at the manual for understanding Sequence Settings, Unlimited RT vs. Safe RT, and Rendering.
BTW, unless you rendered your transition from AE with a Straight alpha channel, as opposed to a Premultiplied one, the edges of the graphic will look wrong.

From After Effect to Final Cut?

It's possible to export from Final Cut to After Effects timeline?

> (Whatever happend to Automatic Duck?)
Adobe acquired the software from Automatic Duck and hired Wes and Harry Plate. The Pro Import After Effects feature in After Effects is the updated Pro Import AE functionality previously sold by Automatic Duck.
BTW, you can download other Automatic Duck software from their website for free these days.

After Effects and Final Cut Express

Hey,
Is it possible to export a project from After Effects into Final Cut Express? I just want to make sure before I get it.
That's all, thanks,
Leroy

You can export a QuickTime movie from After Effects and use it in FCE. AE projects will not open in FCE.

Exporting from After Effects (field dominance issues?)

Hi all,
I created a FCP DV/NTSC sequence with field dominance set to none (I'm working with still images, this improves the quality a lot). I then export that sequence as a quicktime movie file and import that movie file into After Effects.
The problem is after I'm done working in After Effects, I can't export a quicktime file without it looking really poor quality. When exporting, I preserve all the original FCP sequence settings, except the field dominance settings(doesn't seem to be an option in After Effects for this?).
So pretty much I am trying to get a sharp picture when exporting in After Effects, so I can take it back into FCP. Please assist.

Your workflow is quite limited by the DV NTSC sequence. If your sequence is all stills, you are not necessarily tied to that setting at all. Do you need to output to a VTR via FireWire ultimately? What is your final output?
A better sequence choice might be DV50. You would export a QT movie, current settings. You don't actually export from After Effects. You render by adding your comp to the Render Queue. Good render settings would be DV50 (this would not require rendering in FCP), Animation, or perhaps ProRes 422 HQ if you have access to it. You would choose not to render fields.
If it's all stills, it would be better yet to simply start in After Effects.

Is there an easier way to work with adobe after effects and final cut pro x

I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro... Is there a secret to easy working between FCPX and adobe after effects?
Thanks

You'll go from FCP X to and from Motion a lot easier than AE. Motion does pretty much anything AE does, most of the time faster and easier. Without Motion, you can't do custom templates. You can't customize the encoding of files without Compressor. Why would you want to remove them from your system? Leave them, use AE if you want along side of them. But I'd learn Motion first. Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

After effects vs final cut pro?

Is comparing adobe after effects to final cut pro, a fair comparison? What I mean is, looking around on youtube, I see better... effets on projects made with projects on after effects. now, I love FCP for editing, does adobe give a better program thats can do effects. I am looking to make my videos look more profesional, and I notice after effects has effects built into its system to do effects.
After looking at this vidoe, im sold, final cut pro can not do this that quick.
http://videocopilot.net/products/action2/tutorials/guided_tour/

David Bogie Chq-1 wrote:
I am looking to make my videos look more profesion< </div>
Effects do NOT make your videos more professional. Professionalism is the only thing that can make your videos appear to have been produced, written, shot, and edited by a professional. Even faking professional video requires elevated professionalism.
Hey! Just wait one second! That's is NOT what is promised by Apple and whoever makes those promises! All I have to do is buy the computer and the software and I'm a "professional!"
But I truly and strongly encourage you to go ahead and purchase After Effects based solely on the Video Copilot tutorials. Know in advance that AE is about ten times as complex as FCP ever will be and you will want to post extensively in the Beginner's AE Forum on the cow.
bogiesan
I would also suggest extensive posting in the FCP Beginners forum on the Cow for the OP.

When I export from the timeline in Final Cut Pro HD, I get a general error message

When I export from the timeline in Final Cut Pro HD, I get a general error message and the export quits. Any ideas on a fix?

Also, if I remember correctly, Final Cut Pro HD was version 4.5. Is this what you are running?
If so, what version of OSX and Quicktime are you running?
x

16:9 video sides cut off when exported from After Effects

When I export a 16:9 video from After Effects, the sides are cut off in the exported clip. I've tried different export settings and and my composition settings are correct, from what I can tell. Does anyone know why this could be happening?
Thanks!

and my composition settings are correct, from what I can tell.
But are they really? We cannot know, because you don't say anything about your exact render settings and comp settings, which is what is required here. You could be using an unsuitable CoDec or even crop your output inadvertently by using a specific output module setting....
Mylenium

Sound problem with exporting from After Effects

Hello everybody,
I exported a windows media video from premiere cs5 (it was shot with the cannon 7d).
The video has 1 video channel, 1 audio channel that contains a conversation, and another audio channel that contains only music.
After I exported it, I imported the video into After Effects cs5, I added some effects, and then I exported it as a windows media video.
The audio settings were:
Mode- music
codec- windows meida audio voice 9
audio format- 20kbps, 22.05 khz, mono
Even though the video from Premiere was flawless, the one from After Effects contains the conversation perfectly, but the music is very low and even erratic.
Did anybody experienced this problem?

AE doesn't deal with multiple channels. It always assumes that a file with 2 channels is stereo. You need to export the audio from Premiere separately or create a proper stereo mix, not throw two interleaved mono channels at AE...
Mylenium

Rendering After Effects to Final Cut Pro

I'm very new to Final Cut Pro and After Effects. I've managed to learn the basics for FCP on Lynda.com and I can create a basic video. What I'd like to do now is create text intro that I can apply to the beginning of all my videos. I learned about the text effects in After Effects. From with After Effects I can open a text effect and create the text that I want. My question is, what settings should I use to export this to a format that I can then import into my movie timeline in FCP?
I'm creating HD videos in YouTube at 720p.
Any help would be greatly appreciated.

Captain Mench wrote:
Now -- if you need to export an alpha channel out of AE then you'll need some specific formats.
Good luck,
CaptM
Welcome home, Mench!
To maintain the alpha channel from AE, the OP will want to look up how to be using two codecs, Animation and ProRes 4444. Both are extensively described in the help system for FCP and After Effects or just google them for several hours of interesting reading. The OP will also need to understand the concept of an alpha channel which, come to think of it, was difficult for me.
bogiesan

Best way to export from Motion 2 into Final Cut Pro 5, working in DV?

I am working in DV in Final Cut Pro 5, and I would like to get the best quality from anything I bring in from Motion 2 into Final Cut Pro 5, I keep hearing use the Animation codec. I would like to hear from the Panel of experts.
Happy Thanksgiving,
Sebastian

The Best way is to round-trip from FCP. Or simply import the .motn file directly into FCP. If you require an alpha channel and for some reason don't want to bring the .motn file in, Animation with millions+ for the colors (+ is the alpha channel) will work, But if you just want straight DV, you should export a DV file.
Patrick

How do I turn on the GUI controls for the Focus Blur Effect in Final Cut Pro X

I can't find the setting that enables the GUI control overlay to manipulate the parameters of the Focus blur effect in Final Cut Pro X. When I have the clip and the focus effect selected I only get a center element overlay. At one point I had controls for all the other elements of this effect.
anyone know a shortcut or how I can toggle these controls back on?

I don't see any other screen controls either.
Maybe there was a change sometime, or maybe you were using a different effect?

Placing after effects in Final Cut X

We have an After Effects clip saved through Compressor as a ProRes 422 file. It is saved from After Effects as a 16 bit file. When we look at it in Quicktime on the computer it looks fine, but when we bring it into Final Cut X it is small and crunchy.
Should it be saved as a 32 bit? Any other suggestions?
If it looks ok on the computer screen in Quicktime, is there a trick to bringing it into Final Cut X?
Thanks,
Mari

Need some more information. "Small and crunchY" are inexact descriptors. The bit depth of the file should not affect the size of the image. What pixel dimensions are your FCP timeline and your AE movie? Are they the same?

Quality Setting for exporting from After Effects To Final Cut

Similar Messages

Maybe you are looking for