Quantity not updating in storage location

Dear one and all,
For a Sales order and Delivery order , System has not reduced the entire qty from a storage location after making the invoice. System reduced only part qty. The balance qty is still remaining in the storage location.
Plz guide what all needs to be checked.
Thanks & regards
Sharad

Dear GSL & Lakshmipati,
Thanks for ur responses.
One last question -
I have an order wherein there are some physical items:
- they are not value/text/service items
- item cat/sch line cat automatically determined
- sch line cat is relevant for deliv but not for MRP (no movement type defined) in customization
- there Goods Movement Status is showing as complete (C) in Delivery
- there doc flow is showing as "confirmation of service"
- all the items are completely delivered & invoiced
- no batch split is occuring
How will you keep track of such items (in storage loc.)? Why would you have such items?
Thanks & regards
Sharad

Similar Messages

Function module does not update the storage location in delivery

Hello,
I've been trying to use SD_DELIVERY_UPDATE_PICKING to update the storage location in SD return deliveries, without any success. Any clues? The FM works fine when it comes to updating the picking quantity, but the storage location issue still persists.
Thanks in advance,
Joao

Hi Joao,
I have the same problem. I tried to find the FM SD_OUTB_DELIVERY_CHANGE but couldn't find it. Have you by any change specified the incorrect FM name here? If yes, can you please communicate the correct FM name?
Regards,
Divyaman

Problem in Address update for storage location via LSMW

I am trying to update the address of storage location thru LSMW,
Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
Currently my recording only takes me to the create storage location & no LHS 'dialogue structure' for 'Addressees for storage location'
Please give the suggestions as I its on urgent for me to update 1000 storage location.

Dearrrrrrr Prasoooon,
U got it Right Again!!!!!
Thank you so much.
I resolved with above Note & now i can happily go on leave from tomorrow.
Salute to you!!!!!!!!

Delivery is to be done at the end user location not at the storage location

Hai Gurus.
I have a problem
I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
regards
chandrasekhar

As i underdstand from your description of issue .You dont want to recive the material in the storage location of your main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master

SHPCON - How to update LGORT (Storage Location)

Hi experts.
I'm using an INBOUND idoc with message SHPCON to create batch split for delivery items.
When trying to update Storage Location, the field is not updated, but all the other fields are correctly populated.
Does anybody know how I can have this field updated?
Any user-exit I can use?
Following the data I am using:
Message Type : SHPCON
Process Code : DELV
Function name : IDOC_INPUT_DELVRY
Segment E1EDL18: PIC
Segment E1EDL19: BAS
Thank you for you attention!
Edited by: Rodolfo Oliveira on Mar 6, 2012 10:24 AM

You're a bit confused. You can not buy more storage for your iPad. It is what you bought the day you bought it. So, a 16GB or a 32GB or a 64GB iPad can not be increased. What you bought was more Cloud storage. Apple gave you 5GB of cloud storage for free. Once you've used that, you need to buy more. Don't confuse that with adding storage to your actual iPad. Two completely different things.

Change Software Update Service storage location - OS X Server 2.2

What's the best way to change the file storage location used by the Software Update Service in Server 2.2? I don't want to change the default "Service Data" location for the other services.
Generally I like to make as few changes to the standard configuration as possible, but in this case I need to make an exception. I'd really like to to get the catalog of update files on to an External Pegasus RAID.
I've tried using a symlink to the /Library/Server/Software Update/Data folder. That didn't work as the service was unable to update the catalogs.
Should I use a symlink on the whole /Library/Server/Software Update/ folder or is there perhaps a better way?
With any potential solutions, how likely is is that changes I make likely to be overwritten with future updates.
Thanks,
GRW

Question (please use responses in bold in square brackets)
Response
1
Update went smoothly with NO problems [No]
No
2
Update actually solved existing previous problem with server [Not sure yet]
Not sure yet
3
Updated from Server App version 2.2 [Yes]
Yes
4
If answer to Q.3 was 'No' please advise previous server version [Server app version #]
5
OS X version at the time was 10.8.2 [Yes]
Yes
6
If answer to Q.5 was 'No' please advise previous OS X version [-]
To clarify:
1) As it was updating application data, I got an error message at the very end of the update saying that some application data may not be usable/work/wasn't updated (something to that tune) with a yellow triangle and exclamation mark inside it. After the update, I rebooted the server just in case then let everythign start up normally. All services turned on as per usual.
I have gone through most of my services that I run and I'll list off everything that I've tried out and it's state:
Caching Server - Looks OK
Contacts - Functioning so far as expected
Calendar - Functioning so far as expected
Profile Manager - Was able to test a push profile add and delete with success
DNS - Functioning as normal
Software Update - Looking good so far (I had issues with it stopping and restarting randomly with an interval of a month or two between events, hoping that is fixed, though it never affected functionality - it was in the error logs)
File Sharing - Working as expected
Open Directory - No issues thus far
VPN - Looks OK
Websites - Functioning as expected
Hope that helps you guys!

Physical Inventory Movement Block not Rest at Storage Location Level

Hi,
We are facing a typical problem in our Production System and the issue is as follows:
1. We have created a Physical Inventory Document for a material with Freeze Book Inventory and Posting Block indicators.
2. We completed the count and entered the same with reference to the PI Document.
3. We reconciled and posted the differences in the system.
4. We still find that in Material Master the Physical Inventory block for material movements was not reset automatically at the Storage Location stock view.
Please help us urgently as all our Goods movements for this material are held up.
Thanks

Hi,
I am able to see 4 PIDs in MI22 for my material.
2 docs pertaining to the latest Annual Physical Inventory in 2010.
These documents are for the same material in the same plant but for different Storage Locations. Out of which when i see the Material Master - Storage Location view, i see that the Physical Inventory Block "X" is set for one of the Storage Locations.
The PID for the Storage Location with this Physical Inventory Block for Movements indicator, is already settled (Count done and no differences in physical and book stock in this storage location).
The problem persists and i need to remove the posting block which was not reset.

Picking quantity from a different storage location during batch split??

Hi Gurus,
Have an issue with doing batch split in a delivery with batches from several storage locations.
Have delivery XXXXXX where I want to pick batches from several different storage locations.
I click on the batch split button and select the different batches and quantitys.
The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
Thank You for all Your help!
BR,
Christian

Hi Christian,
you have not jet got an answer -- here my suggestion.
You have to use the Userexit Mv50afz1. Here you can do some checks and you can do a popup, where you can sign the LGORT, where the batch is.
In any case, you need an ABAPer
In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
If nessesary create an ylips- Line of the position.
Use an assign-command to avoid the change of the index.
hans

Quantity not updated in EDI Vendor posting

Hi experts,
We've observed that Quantity (MENGE) is not getting updated on the FI document (Segment 'E1EDP01'). Idoc type 'INVOIC01' and message we using is 'INVOIC01'.
Any idea or has anyone come across this issue?
Thanks for your time.

Hi,
Segment E1EDP01, quantity and unit of measure the quantity and the unit of measure are transferred if the corresponding fields in the billing document are filled. If the corresponding fields in the billing document are filled, but MENGE is still not updated into FI document, Maybe you have used the user exit EXIT_SAPLVEDF_002 on SD side to suppress the values.
Best Regards,
Gladys

Actual Cost & Quantity not update in Process Order

HI,
Process order confirmed from Production person before maintain the actity price rate.
hence those confirmation are gone in to the error & found in t.code COFC
afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
but still actual quantity & cost not updated.

Hi Ajay
'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
You may need to raise an OSS message incase the program is not available to download
BR,Ajay M

Account Based CO-PA Quantity Not updated in COEP-MEGBTR

Hello,
We use account based CO-PA. For certain Billing transactions, the quantity is not coming to the BW.
On analysis, we notice that the line item document created in COEP table is not updating the quantity field MEGBTR but only the field MBGBTR.
Not sure what is cuasing these transactions to post differently.
Thanks for your help. Murali

Could you please check note 105747, 911203, 353643 or 188724, This does not pertain to ECC6 but possibly earlier releases.

Stock is not showing in storage location after MIGo

I am not able to see the stock in storage location after MIGO. Please help me where Iam wrong.

Hi Deepak,
while GR , which movement type it should ?
check document for that GR , is it created?
check your stock may be at inspection storage location
Thanks
Bala

PO Partial confirmation Quantity not updated for non-catalog items in SRM

Hi Experts,
Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
Steps to Reproduce:
1) Create a purchase order.
2) Confirm some part of the quauntity and reject the balance part in Ariba.
3) Open the link in SRM and click Copy push button.
4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
Expected Result:
PO should update the changes done in Ariba.
Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as in the Catalog items partially confirmed POR is copied onto PO.
kindly give your valuable inputs to poceed furthur.
Regards,
Chandu

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Bapi/FM tp update DO storage location

hi all,
any bapi/FM to update SD DO storage location... thanks for the help

Hello,
Solved the error. Just miss some parameters:
     lwa_item_data-deliv_numb = lwa_lips-vbeln.
     lwa_item_data-deliv_item = lwa_lips-posnr.
     lwa_item_data-fact_unit_nom = lwa_lips-umvkz.
     lwa_item_data-fact_unit_denom = lwa_lips-umvkn.
     APPEND lwa_item_data TO lit_item_data.
     lwa_item_control-deliv_numb = lwa_lips-vbeln.
     lwa_item_control-deliv_item = lwa_lips-posnr.
     APPEND lwa_item_control TO lit_item_control.
     lwa_item_data_spl-deliv_numb = lwa_data-vbeln.
     lwa_item_data_spl-deliv_item = lwa_data-posnr.
     lwa_item_data_spl-stge_loc = 'H114'.
     APPEND lwa_item_data_spl TO lit_item_data_spl.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
     EXPORTING
       header_data    = lwa_header_data
       header_control = lwa_header_control
       delivery       = p_vbeln
     TABLES
       item_data      = lit_item_data
       item_control   = lit_item_control
       return         = lit_return
       item_data_spl = lit_item_data_spl.
it's important to fill fact_unit_nom and fact_unit_denom.
Best regards,
Pedro Nunes

Picked Quantity not updated while using FM in background

Hi All,
We have a requirement to update the picking quantity in a delivery order (VL02N) through a custom screen.
Inorder to do the above operation we are using the Function Module SD_DELIVERY_UPDATE_PICKING_1. We find a strange behaviour while using this FM.
The FM updates the picking quantity when executed online, but when called in the program (By passing exactly the same parameters) it does not update the picking quantity even after using a COMMIT WORK command after the function module. While debugging it was found that the XLIPS intl. table and LIPS structure was not being populated when the FM was executed through a function call in program.
We tried using the WS_DELIVERY_UPDATE, but even this FM behaves in the
same way.
Please let us know as to how to over come this issue.
regards,
Sandeep

Hi Babul,
Thanks for your reply. I actually tried using even the above mentioned FM. But I am faced with the same error. The problem is that in one of the includes LV50LF01 (Subroutine READ_DELIVERY) of the FM, the internal table XLIPS gets refreshed. This happens only when the FM is called in our program.
regards,
Sandeep

Quantity not updating in storage location

Similar Messages

Maybe you are looking for