Query Builder - Find WEBI reports that are using a table

I am trying to find list of WEBI reports using a specific table. This specific table is used in only 1 universe.
Though I could successfully find list of reports that use this universe, I am unable to find drill down further and find the subset of reports using this table/object.
SELECT si_name, SI_KIND, si_id, SI_PARENTID,SI_AUTHOR,SI_OWNER FROM CI_INFOOBJECTS, CI_APPOBJECTS
WHERE PARENTS("SI_NAME='WEBI-UNIVERSE'","SI_NAME ='MyUniverse'")
Is it possible to find the information I am looking for using query builder.
Also, for a given WEBI report I am trying to find the list of report names and the folder they reside in:
Select SI_NAME, SI_ID, SI_PATH, SI_KIND, SI_OWNER From CI_INFOOBJECTS, CI_APPOBJECTS WHERE
PARENTS("SI_NAME='Folder Hierarchy'",
"PARENTS('SI_NAME=''WEBI-UNIVERSE'' ', 'SI_NAME=''MyUniverse'' ')" )
The above query just gives me the folder names. I am looking to find the report names as well the the folder (and preferably the path) in a single query. Is that possible.

Sri,
With respect to your 1st requirement:
In BusinessObjects 6.5 it was possible. However, post BOXIR2 this information could not be retrieved from CMS via query builder. I agree with Jorge Sosua's comment above.
With respect to your 2nd requirement:
The field 'SI_PATH' will retrieve Filestore path(physical path). If you were referring logical path(Public folder path or psuedo-reference path) will you please refer my respone to Kelly Stone at BusinessObjects Query builder queries - Part II , If this may assist you.
Regards,
Sandeep

Similar Messages

How to identify reports that are using a specific universe object?

Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?

Hi Samuel,
In case you are using BOXIR2 you can do this by editing the crystalenterprise.webi.xml file.
Replace the CrystalEnterprise.Webi.xml file (Take a backup) with the edited one.
Path where you can find this file- Tomcat/webapps/businessobjects/enterprise115/desktoplaunch/WEB-INF/classes/META-INF/CrystalEnterprise.Webapps/ePortfolio/plugins
Paste the Custom Documentation folder in Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\
May I know your email Id so that I can send you the edited crystalenterprise.webi.xml file.
Regards,
Sarbhjeet Kaur

How to find reports which are using sales tables

Hi Guys,
we are using OBIEE 10g version.Here i need to identify the the reports which are using sales tables.
Table names are given but how to find which report is using these tables.Is there any method to find
or we have to check all reports manually?
Could any one pls suggest me here!
Regards,
sk
Edited by: 912736 on Jun 8, 2012 1:24 PM

Hi SK,
You can run a report from catalog manager that willl give you all answers requests and the subject area columns in use, you can map these back to the sales tables either manually or by linking (vlookup) to an RPD report that you can run from the Admin tool.
The Usage Tracking method is pretty good but you will have to match up the reports using the Logical SQL.
I'd do both methods and cross ref your results to ensure nothing slips the net.
Regards
Alastair

How to find all oaf pages that are using a table in their VOs

Hello everyone,
I need to findout all the View Objects and Entity Objects that are using a table lets say A. Is there a smart way to find out all the VOs and EO's that are using my table?
Thanks
Sunny

Technically there would be only one EO for your table (if its Oracle code). VOs contain queries and there might be many which refer the table.
One option I can think of is doing a table name search in the various (EO and VO) directories on JAVATOP. Its the XML (99% cases) that would have the queries. Rest 1% having dynamic VOs, it would be difficult to determine.
Regards

Hiding reports that are used by dashboards

Hi:
We are using some Webi reports for use in Live Office/Xcelsius. While we want the users to be able to consume the data from these reports in the Xcelsius dashboards (which reside in InfoView as well as on Desktops), we don't want them to be able to see these reports in InfoView. Is there a way to "hide" these reports from the users but still give the users the ability to refresh the dashboard data that uses these reports? Thanks.
-Nishant

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

SQL query to find all suites that are associated with automation

I trying to incorporate CodeUI tests into a Release Mangement deployment template ... As a developer, I want to be able to specify a sub-tree of a test plan & only execute those test suites that are associated with automation. Is there a way to
extract all automated workitems and associated them with their respective test suites?
Any assistance would be greatly appreciated!

John,
I've partially resolved the issue of executing a sub-set of suites with the following powershell implementation:
1. Extract "potential" suite paths from a XML configuration file:
<?xml version="1.0"?>
<Configurations>
<Properties>
<Property key="DEFAULT" value="SuitePaths" />
<Property key="DatabaseServer" value="MYDBSERVER" />
<Property key="DatabaseInstance" value="Default" />
<Property key="DatabaseName" value="TFS_DefaultCollection" />
<Property key="ConfigurationName" value="US - Windows 7 and IE 10" />
</Properties>
<Notifications>
<Notification key="0" value="[email protected]" />
</Notifications>
<SuitePaths>
<SuitePath key="0" value="MyProject\WebProduct\Student\Features\Login" />
<SuitePath key="1" value="MyProject\WebProduct\Student\Features\Logout" />
</SuitePaths>
<AreaPaths>
<AreaPath key="0" value="MyProject\WebProduct\Student\Features\Login" />
</AreaPaths>
</Configurations>
2. Extract record set of suites from TFS via SQL query:
# FUNCTION: Retrieve-SuitePaths
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) Paths -- Hash table of suite paths
Function Retrieve-SuitePaths
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)]$Paths
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve suite(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$SuitePaths = "("
$Counter = 0
foreach ($Key in $Paths.Keys)
if ($Counter -gt 0)
$SuitePaths = $SuitePaths + ", "
$SuitePaths = $SuitePaths + "'" + $Paths.Get_Item($Key) + "'"
$Counter += 1
$SuitePaths = $SuitePaths + ")"
# --DEBUG ONLY--> Write-Output "Paths: $SuitePaths" | Out-File -FilePath $LogFile -Append
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_SuiteChildren
AS
-- Anchor definition to pull all certify modes
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
CONVERT(NVARCHAR(256), NULL) AS ParentTitle,
S.[Title],
0 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
WHERE
S.ParentSuiteID = 0
UNION ALL
-- Recursive member to pull details of certify sessions
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
PS.[Title] AS ParentTitle,
S.[Title],
SC.[RecurseLevel] + 1 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN cte_SuiteChildren AS SC on SC.SuiteID = S.ParentSuiteID
INNER JOIN [dbo].[tbl_Suite] AS PS ON SC.SuiteId = PS.SuiteId
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
cte_SuiteLevel_0
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[ProjectName] + '\' + SC.[PlanName] AS Path,
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 0
cte_SuiteLevel_1
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 1
cte_SuiteLevel_2
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 2
cte_SuiteLevel_3
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 3
cte_SuiteLevel_4
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 4
cte_SuiteLevel_5
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 5
cte_SuiteLevel_6
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 6
cte_SuiteLevel_7
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 7
cte_SuiteLevel_8
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 8
cte_SuiteLevel_9
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 9
cte_SuiteLevel_10
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 10
cte_Suites
AS
SELECT
SL0.[ProjectId],
SL0.[PlanId],
CASE
WHEN SL2.ParentSuiteId IS NULL
THEN SL1.ParentSuiteId
ELSE CASE
WHEN SL3.ParentSuiteId IS NULL
THEN SL2.ParentSuiteId
ELSE CASE
WHEN SL4.ParentSuiteId IS NULL
THEN SL3.ParentSuiteId
ELSE CASE
WHEN SL5.ParentSuiteId IS NULL
THEN SL4.ParentSuiteId
ELSE CASE
WHEN SL6.ParentSuiteId IS NULL
THEN SL5.ParentSuiteId
ELSE CASE
WHEN SL7.ParentSuiteId IS NULL
THEN SL6.ParentSuiteId
ELSE CASE
WHEN SL8.ParentSuiteId IS NULL
THEN SL7.ParentSuiteId
ELSE CASE
WHEN SL9.ParentSuiteId IS NULL
THEN SL8.ParentSuiteId
ELSE CASE
WHEN SL10.ParentSuiteId IS NULL
THEN SL9.ParentSuiteId
ELSE SL10.ParentSuiteId
END
END
END
END
END
END
END
END
END AS [ParentSuiteId],
CASE
WHEN SL2.SuiteId IS NULL
THEN SL1.SuiteId
ELSE CASE
WHEN SL3.SuiteId IS NULL
THEN SL2.SuiteId
ELSE CASE
WHEN SL4.SuiteId IS NULL
THEN SL3.SuiteId
ELSE CASE
WHEN SL5.SuiteId IS NULL
THEN SL4.SuiteId
ELSE CASE
WHEN SL6.SuiteId IS NULL
THEN SL5.SuiteId
ELSE CASE
WHEN SL7.SuiteId IS NULL
THEN SL6.SuiteId
ELSE CASE
WHEN SL8.SuiteId IS NULL
THEN SL7.SuiteId
ELSE CASE
WHEN SL9.SuiteId IS NULL
THEN SL8.SuiteId
ELSE CASE
WHEN SL10.SuiteId IS NULL
THEN SL9.SuiteId
ELSE SL10.SuiteId
END
END
END
END
END
END
END
END
END AS [SuiteId],
SL0.ProjectName,
SL0.PlanName,
--SL0.Path,
--SL1.[Title],
CASE
WHEN SL2.Title IS NULL
THEN SL0.Path + '\' + SL1.Title
ELSE CASE
WHEN SL3.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title
ELSE CASE
WHEN SL4.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title
ELSE CASE
WHEN SL5.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title
ELSE CASE
WHEN SL6.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title
ELSE CASE
WHEN SL7.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title
ELSE CASE
WHEN SL8.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title
ELSE CASE
WHEN SL9.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title
ELSE CASE
WHEN SL10.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title
ELSE SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title + '\' + SL10.Title
END
END
END
END
END
END
END
END
END AS Path,
CASE
WHEN SL2.RecurseLevel IS NULL
THEN SL1.RecurseLevel
ELSE CASE
WHEN SL3.RecurseLevel IS NULL
THEN SL2.RecurseLevel
ELSE CASE
WHEN SL4.RecurseLevel IS NULL
THEN SL3.RecurseLevel
ELSE CASE
WHEN SL5.RecurseLevel IS NULL
THEN SL4.RecurseLevel
ELSE CASE
WHEN SL6.RecurseLevel IS NULL
THEN SL5.RecurseLevel
ELSE CASE
WHEN SL7.RecurseLevel IS NULL
THEN SL6.RecurseLevel
ELSE CASE
WHEN SL8.RecurseLevel IS NULL
THEN SL7.RecurseLevel
ELSE CASE
WHEN SL9.RecurseLevel IS NULL
THEN SL8.RecurseLevel
ELSE CASE
WHEN SL10.RecurseLevel IS NULL
THEN SL9.RecurseLevel
ELSE SL10.RecurseLevel
END
END
END
END
END
END
END
END
END AS RecurseLevel
FROM
cte_SuiteLevel_0 AS SL0
LEFT OUTER JOIN cte_SuiteLevel_1 AS SL1 ON SL1.ParentSuiteId = SL0.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_2 AS SL2 ON SL2.ParentSuiteId = SL1.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_3 AS SL3 ON SL3.ParentSuiteId = SL2.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_4 AS SL4 ON SL4.ParentSuiteId = SL3.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_5 AS SL5 ON SL5.ParentSuiteId = SL4.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_6 AS SL6 ON SL6.ParentSuiteId = SL5.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_7 AS SL7 ON SL7.ParentSuiteId = SL6.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_8 AS SL8 ON SL8.ParentSuiteId = SL7.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_9 AS SL9 ON SL9.ParentSuiteId = SL8.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_10 AS SL10 ON SL10.ParentSuiteId = SL9.SuiteId
SELECT
SS.[ProjectId],
SS.[PlanId],
SS.[ParentSuiteId],
SS.[SuiteId],
SS.[ProjectName],
SS.[PlanName],
SS.[Path],
SS.[RecurseLevel]
FROM
SELECT DISTINCT
S.[ProjectId],
S.[PlanId],
S.[ParentSuiteId],
S.[SuiteId],
S.[ProjectName],
S.[PlanName],
S.[Path],
S.[RecurseLevel]
FROM
cte_Suites AS S
WHERE
S.[RecurseLevel] IS NOT NULL
AND S.[Path] IN $($SuitePaths)
) AS SS
ORDER BY
SS.[Path]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 240
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
3. Execute every suite in the record set via TCM
$DataSet = ( Retrieve-SuitePaths -LogFile:$LogFile -Connection:$Connection -Path:$Paths)
# --DEBUG ONLY--> $DataSet.Tables[0].Rows.Count
# --DEBUG ONLY--> $DataSet.Tables[0]
# Determine whether or not any test suites were retrieved from TFS....
if ( $DataSet.Tables[0].Rows.Count -gt 0 )
$ListTestRunID = $null
$SumFailed = 0
$SumInconclusive = 0
foreach ($Row in $DataSet.Tables[0].Rows)
# Set project, plan & suite variables....
[Int16]$ProjectID = $Row.Item('ProjectId')
[Int16]$PlanID = $Row.Item('PlanId')
[Int16]$ParentSuiteID = $Row.Item('ParentSuiteId')
[Int16]$SuiteID = $Row.Item('SuiteId')
$ProjectName = $Row.Item('ProjectName')
$PlanName = $Row.Item('PlanName')
$Path = $Row.Item('Path')
$RecurseLevel = $Row.Item('RecurseLevel')
# Set local build path variable....
switch -wildcard ($Path)
"*WebCMS*\Administration\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Administration'
"*WebCMS*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Instructor'
"*WebCMS*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Student'
"*WebProduct*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Instructor'
"*WebProduct*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Student'
default
$CUITBuildPath = $CUITPathUNC
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output 'Test Suite:' | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output " ID:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectID" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanID" | Out-File -FilePath $LogFile -Append
Write-Output " Parent Suite: $ParentSuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $SuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationID" | Out-File -FilePath $LogFile -Append
Write-Output " Name:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectName" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanName" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationName" | Out-File -FilePath $LogFile -Append
Write-Output " Path:" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $Path" | Out-File -FilePath $LogFile -Append
Write-Output " Build: $CUITBuildPath" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> Write-Output " Recursion: $RecurseLevel" | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
# Set TCM arguements....
$ArguementPlanID = "/planid:$PlanID"
$ArguementTitle = "/title:$Title - $Path (SuiteID: $SuiteID)"
$ArguementSuiteID = "/suiteid:$SuiteID"
$ArguementConfigurationID = "/configid:$ConfigurationID"
$ArguementTFSCollection = "/collection:$TFSCollection"
$ArguementTeamProject = "/teamproject:$TFSTeamProject"
if(![string]::IsNullOrEmpty($CUITBuildPath))
$ArguementBuildDirectory = "/builddir:$CUITBuildPath"
$ArguementBuild = ""
$ArguementBuildDefinition = ""
else
$ArguementBuildDirectory = ""
$ArguementBuild = "/build:$TFSBuild"
$ArguementBuildDefinition = "/builddefinition:$BuildDefinition"
$ArguementTestEnvironment = "/testenvironment:$WebServer"
$ArguementSettingsName = ""
if(![string]::IsNullOrEmpty($SettingsName))
$ArguementSettingsName = "/settingsname:$SettingsName"
# Create test run....
Write-Host "$TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName"
Write-Output " $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName" | Out-File -FilePath $LogFile -Append
try
$TestRunID = & $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTeamProject $ArguementTFSCollection $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName
catch
$ExitMessage = $_Exception.Message
# --DEBUG ONLY--> Write-Output "TestRunID: $TestRunID" | Out-File -FilePath $LogFile -Append
if ($TestRunID -match '.+\:\s(?<TestRunID>\d+)\.')
# The test run ID is identified as a property in the match collection so we can access it directly by using the group name from the regular expression (i.e. TestRunID).
$TestRunID = $matches.TestRunID
$ArguementID = "/id:$TestRunID"
$TestRunResultsFile = $TempDirectory + "\TestRunResults$TestRunID.trx"
$ArguementQueryText = "/querytext:SELECT * FROM TestRun WHERE TestRunID=$TestRunID"
$ArguementResultsFile = "/resultsfile:""$TestRunResultsFile"""
Write-Host " Waiting for test run to complete ..."
Write-Host $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
Write-Output " $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunCompletion = $true
$WaitCount= 0
while ($WaitingForTestRunCompletion)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
Start-Sleep -s $TestRunWaitDelay
$TestRunStatus = & $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
$TestRunStatus
if ($TestRunStatus.Count -lt 3 -or ($TestRunStatus.Count -gt 2 -and $TestRunStatus.GetValue(2) -match '.+(?<DateCompleted>\d+[/]\d+[/]\d+)'))
$WaitingForTestRunCompletion = $false
Write-Host "Evaluating test run $TestRunID results..."
# Take small pause(s) since the results might not be published yet....
Start-Sleep -s $TestRunWaitDelay
# Export results....
Write-Host $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile
Write-Output " $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunExport = $true
$WaitCount= 0
while ($WaitingForTestRunExport -and $WaitCount -lt 5)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
$ExportResult = & $TCMEXE 'run' '/export' $ArguementID $ArguementResultsFile $ArguementTFSCollection $ArguementTeamProject
if ([System.IO.File]::Exists($TestRunResultsFile))
$WaitingForTestRunExport = $false
if ([System.IO.File]::Exists($TestRunResultsFile))
# Load the XML document contents.
[xml]$TestResultsXML = Get-Content "$TestRunResultsFile"
# Extract the results of the test run.
$TotalTests = $TestResultsXML.TestRun.ResultSummary.Counters.total
$PassedTests = $TestResultsXML.TestRun.ResultSummary.Counters.passed
$FailedTests = $TestResultsXML.TestRun.ResultSummary.Counters.failed
$InconclusiveTests = $TestResultsXML.TestRun.ResultSummary.Counters.inconclusive
# Output the results of the test run.
Write-Host "========== Test: $TotalTests tests ran, $PassedTests succeeded, $FailedTests failed, $InconclusiveTests inconclusive =========="
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output "Summary:" | Out-File -FilePath $LogFile -Append
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output " Total: $TotalTests" | Out-File -FilePath $LogFile -Append
Write-Output " Passed: $PassedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Failed: $FailedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Inconclusive: $InconclusiveTests" | Out-File -FilePath $LogFile -Append
$SumFailed += $FailedTests
$SumInconclusive += $InconclusiveTests
# Remove the test run results file.
[System.IO.File]::Delete($TestRunResultsFile) | Out-Null
# Add "current" TestRunID to the list of TestRunID(s)....
if ($ListTestRunID -ne $null)
$ListTestRunID = $ListTestRunID + ', '
$ListTestRunID = $ListTestRunID + $TestRunID
# Next test suite....
4. Extract record set of test runs from TFS via SQL query:
# FUNCTION: Retrieve-TestRuns
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRuns
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test run(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_State
AS
SELECT 0 AS [StateID], 'Unspecified' AS [StateName]
UNION ALL
SELECT 1 AS [OutcomeId], 'To Be Determined (1)' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'Aborted' AS [StateName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [StateName]
UNION ALL
SELECT 6 AS [StateID], 'Needs Investigation' AS [StateName]
SELECT
TR.[ProjectId] AS [Project Id],
P.[ProjectName],
TR.[TestPlanId] AS [Plan Id],
TP.Name AS [TestPlanName],
TR.[TestRunId] AS [Run Id],
TR.[Title],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[StartDate] AS [Date Started],
TR.[CompleteDate] AS [Date Completed],
DATEDIFF(SECOND, TR.[StartDate], TR.[CompleteDate]) AS Duration,
TR.[Type],
TR.[IsAutomated],
TR.[TotalTests] AS [Total],
TR.[PassedTests] AS [Passed],
TR.[IncompleteTests] AS [Incomplete],
TR.[UnanalyzedTests] AS [Unanalyzed],
TR.[NotApplicableTests] AS [Not Applicable]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestRun] AS TR
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Project] AS P ON TR.ProjectId = P.ProjectId
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Plan] AS TP ON TR.TestPlanId = TP.PlanId
INNER JOIN cte_State AS S ON TR.[State] = S.[StateID]
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[StartDate]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
5. Extract record set of test results from TFS via SQL query:
# FUNCTION: Retrieve-TestRunResults
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRunResults
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test result(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_Outcome
AS
SELECT 0 AS [OutcomeId], 'To Be Determined (0)' AS [OutcomeName]
UNION ALL
SELECT 1 AS [OutcomeId], 'In Progress' AS [OutcomeName]
UNION ALL
SELECT 2 AS [OutcomeId], 'Passed' AS [OutcomeName]
UNION ALL
SELECT 3 AS [OutcomeId], 'Failed' AS [OutcomeName]
UNION ALL
SELECT 4 AS [OutcomeId], 'Inconclusive' AS [OutcomeName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [OutcomeName]
UNION ALL
SELECT 6 AS [OutcomeId], 'Aborted' AS [OutcomeName]
UNION ALL
SELECT 7 AS [OutcomeId], 'Blocked' AS [OutcomeName]
UNION ALL
SELECT 8 AS [OutcomeId], 'Not Executed' AS [OutcomeName]
UNION ALL
SELECT 10 AS [OutcomeId], 'Error' AS [OutcomeName]
UNION ALL
SELECT 11 AS [OutcomeId], 'Not Applicable' AS [OutcomeName]
UNION ALL
SELECT 12 AS [OutcomeId], 'Paused' AS [OutcomeName]
UNION ALL
SELECT 13 AS [OutcomeId], 'To Be Determined (13)' AS [OutcomeName]
UNION ALL
SELECT 255 AS [OutcomeId], 'Never Run' AS [OutcomeName]
cte_State
AS
SELECT 0 AS [StateID], 'None' AS [StateName]
UNION ALL
SELECT 1 AS [StateID], 'Ready' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Not Ready' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 5 AS [StateID], 'To Be Determined' AS [StateName]
SELECT DISTINCT
TR.[TestRunId] AS [Run Id],
TR.[TestCaseId] AS [Case Id],
O.[OutcomeID] AS [Outcome Id],
O.[OutcomeName] AS [Outcome],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[TestCaseTitle] AS [Title],
TR.[AutomatedTestName] AS [Automation Method],
TR.[DateStarted] AS [Date Started],
TR.[DateCompleted] AS [Date Completed],
DATEDIFF(SECOND, TR.[DateStarted], TR.[DateCompleted]) AS Duration,
TR.[FailureType] AS [Failure Type],
TR.[ErrorMessage] AS [Error]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestResult] AS TR
INNER JOIN cte_Outcome AS O ON TR.Outcome = O.OutcomeID
INNER JOIN cte_State AS S ON TR.State = S.StateID
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[TestRunId],
O.[OutcomeName],
TR.[TestCaseTitle]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "SQL Statement: " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
6. Email results to distribution list
Currently, I'm simplifying the extraction of suite path ... replacing hardcoded depth with STUFF() & XML PATH
Carl.

How to find the objects that are used for a particular BEx query

Hi ,
I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
1. Selection screen variables
2. Characteristics
3. Restrcited, Calculated and normal key figures.
I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
Can you help for table joins to get the output as mentioned above.
Thanks in advance.
Regards,
Sai

Hi,
you want find the total information about query details use the T CODE - RSRTQ.
give the proper selection then execute.
please find the doc.
RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
Thanks,
Phani.

HT1338 how can i find which files that are using the most storage?

help please !!! because my storage availability is getting lower !

Try a program such as Disk Inventory X or OmniDiskSweeper.
(70433)

Find USERS that are using a particulary Forms ??

It is possibile to find the USERS that are using the a FORMS in application server ??
I must update sometime a forms, but if the user is using the forms it is not possibile. Find the user i can call it for exit from teh form.
Thank's a lot.

I'm not aware of such an information somewhere. We had a similar need (actually we needed something more), and we used DBMS_APPLICATION_INFO package, which updates CLIENT_INFO column in V$SESSION.
Bad news are : you have to change every Form to do that....but it's not difficult, you can add a call to that package in WHEN-NEW-FORM-INSTANCE trigger in each Form...

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

What are main events in that are used in ALV reports

hi gurus
what are main events in that are used in ALV reports....
regards
baskar

hi
i think this will help u.
Events in alv and their FM    The main events in alv and their FM and why we use these:
1. SLIS_PRINT_ALV.
2. SLIS_T_LISTHEADER.
3. SLIS_T_EVENT.
4. SLIS_T_SORTINFO_ALV.
5. SLIS_T_LAYOUT_ALV.
6. SLIS_T_FIELDCAT_ALV.
and in classic reports what is the sequence of events:   === Events are
At selection-screen output.
Initialization.
At selection-screen on field
At selection-screen on end of field
At selection-screen on Radiobutton Group R1. (If you have any radio buttons)
At selection-screen on block b1. (If you have any blocks)
Start-of-selection.
Get node. (if the data is retreived from a logical database)
Get node late. (if the data is retreived from a logical database)
Top-of-page. (if the write statement is in the end-of-selection event or we can say that before the first write statement)
end-of-selection.
and fuction modules are
LISTHEADER - Is used to print the header information in the ALV List. Name, Date, Time, ALV Name and other details are called as Header information.   EVENT - Basically this is the FM to handle Event's. When the user needs to do some event operation like when double clicking the a particular field we need to perform some operation.   These events are captured by this FM.   LAYOUT - This FM is used to define the layout of the List. There are many options available in this FM to define the Layout style.   FIELDCAT - These are used to populate the List header. We can change them according to our req.
User-defined Text Output Event
    Application
      print_end_of_list
    Define output text to be printed at the end of the entire list
      print_top_of_list
    Define output text to be printed at the beginning of the entire list
      print_end_of_page
    Define output text to be printed at the end of each page
      print_top_of_page
    Define output text to be printed at the beginning of each page
      subtotal_text
    Define self-defined subtotals texts
Mouse-controlled Actions in the Grid Control Event
    Application
      button_click
    Query a click on a pushbutton in the ALV Grid Control
      double_click
    Query a double-click on a cell of the ALV Grid control
      hotspot_click
    Query a hotspot click on columns defined for this purpose in advance
      onDrag
    Collect information when elements of the ALV Grid Control are dragged
      onDrop
    Process information when elements of the ALV Grid Control are dropped
      onDropComplete
    Perform final actions after successful Drag&Drop
      onDropGetFlavor
    Distinguish between options for Drag&Drop behavior
Processing of Self-defined and Standard Functions Event
    Application
      before_user_command
    Query self-defined and standard function codes
      user_command
    Query self-defined function codes
      after_user_command
    Query self-defined and standard function codes
Definition of Self-defined Functions Event
    Application
      toolbar
    Change, delete or add GUI elements in the toolbar
      menu_button
    Define menus for menu buttons in the toolbar
      context_menu_request
    Change context menu
      onf1
    Define self-defined F1 help
All of these can be found under type group SLIS.
Events
SLIS_EV_ITEM_DATA_EXPAND        TYPE SLIS_FORMNAME VALUE 'ITEM_DATA_EXPAND',
SLIS_EV_REPREP_SEL_MODIFY       TYPE SLIS_FORMNAME VALUE 'REPREP_SEL_MODIFY', SLIS_EV_CALLER_EXIT_AT_START TYPE SLIS_FORMNAME VALUE 'CALLER_EXIT',
SLIS_EV_USER_COMMAND              TYPE SLIS_FORMNAME VALUE 'USER_COMMAND',
SLIS_EV_TOP_OF_PAGE                     TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
SLIS_EV_DATA_CHANGED                TYPE SLIS_FORMNAME VALUE 'DATA_CHANGED',
SLIS_EV_TOP_OF_COVERPAGE       TYPE SLIS_FORMNAME VALUE 'TOP_OF_COVERPAGE',
SLIS_EV_END_OF_COVERPAGE       TYPE SLIS_FORMNAME VALUE 'END_OF_COVERPAGE',
SLIS_EV_FOREIGN_TOP_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_TOP_OF_PAGE', SLIS_EV_FOREIGN_END_OF_PAGE TYPE SLIS_FORMNAME
VALUE 'FOREIGN_END_OF_PAGE',
SLIS_EV_PF_STATUS_SET                  TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
SLIS_EV_LIST_MODIFY                      TYPE SLIS_FORMNAME VALUE 'LIST_MODIFY',
SLIS_EV_TOP_OF_LIST                       TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
SLIS_EV_END_OF_PAGE                    TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
SLIS_EV_END_OF_LIST                      TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
SLIS_EV_AFTER_LINE_OUTPUT       TYPE SLIS_FORMNAME VALUE 'AFTER_LINE_OUTPUT', SLIS_EV_BEFORE_LINE_OUTPUT     TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE_OUTPUT',
SLIS_EV_SUBTOTAL_TEXT                TYPE SLIS_FORMNAME VALUE 'SUBTOTAL_TEXT'.
with regards
sravani
award points if found useful.

After I edited the SQL in a dataset, I can't use the query builder in any datasets that I create.

Is there a way to reset BI Publisher Enterprise 11 so that I can use the query builder again instead of having to write out all of the SQL? I know that I can't use the query builder for the dataset that I edited the sql in but I would like to use the query builder for new datasets.
Thanks,

Hi J_Constantine,
Welcome to the Apple Support Communities!
I understand that your iPad is restarting and not responding sporadically. You have already attempted some great troubleshooting steps and I think you are on the right track. Holding the home button is one step that you take while placing your device in recovery mode to restore. This is the method that I would suggest to restore. For complete information on how to place your device into recovery mode, please reference the attached article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gs free

My macbook pro keeps saying I have 450 gigabytes out of 500 that are used. But when I look on finder there are no files that are anywhere close to that amount. I went through and deleted files from my mac and now I only have 10 gigabytes of additional space free. My mac now says I have 440 gigs of other that is used. But does not make sense, do I have a virus?

Since you have not identified the OS your MBP is using, these extract may or may not assist you.
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
You may also download from the Internet OmniDiskSweeper (free) and open it it will show all of the files on your MBP and the respective sizes.
ciao.

Where can I find the Tables script that are used in the Documentation

Hello All,
Where can I find the Tables script that are used in the Documentation, Like Sales, Customers, employee, department.......
Appreciate any Help
Thanks & Regards
Madhu K

10g
http://download.oracle.com/docs/cd/B19306_01/server.102/b14198/scripts.htm#sthref77
9i
http://download.oracle.com/docs/cd/B10501_01/server.920/a96539/scripts.htm#4216

Query Builder - Find WEBI reports that are using a table

Similar Messages

Maybe you are looking for