Query jump: No Web server maintained for the presentation of log. system
Hello,
I have created a query jump in the RSBBS transaction to go in R/3 through a Bex Query. When i choose the jump in the query anayzer I have the error message:
<b>No Web server maintained for the presentation of log. system.</b>
Do you have ever had this message? what is the solution? why do my bex anayzer use a web interface to connect in R/3?
Thanks a lot!
Julien
Hi Arun,
Yes, the AIE 300 SYSTEM is R/3 system. If you think this could be a basis problem please let me know and if you can a step by step solution or something to bring to the basis.
Thanks,
Diego
Similar Messages
-
No Web server maintained for the presentation of log. system
Hi Banu/All,
I got the following error message while executing jump target to R/3 Transaction ME2N.
<i>Messages:
No Web server maintained for the presentation of log. system DDVR3110
Jump target cannot be executed
An error occurred with the report to report interface during the jump</i>
Banu, I have gone through the following link which u have given in the previous queries, but can u please tell me how to install ITS for the target system? or how to know/whom to ask regarding the ITS installation? is it BASIS People?
http://help.sap.com/saphelp_nw04/helpdata/en/61/b8c63ce4b79679e10000000a114084/content.htm
Apart from ITS, what other settings have to be done in this kind of scenarios?
Can U please eloborate on this topic, please?
Thanks & Regards...
Ganesh
Message was edited by:
GaneshHello Ganesh,
Did you have the chance to solve it?.
I have the same issue.
Thanks in advance.
Facundo Romero. -
No RFC destination is maintained for the port 'SAPERP'
Hi!
I am facing with a very strange thing.
I am implementing a File_to_IDOC scenario.
Therefore I created in XI system the appropriate Ports in tcode IDX1.
I use one business system with two clients (SAPERB100 and SAPERB200).
I defined there of course the appropriate RFC connections (RFC_IDOCERB100 and RFC_IDOCERB200).
Unfortunately when I go into tcode IDX2 and try to load metadata I get the following error:
No RFC destination is maintained for the port 'SAPERP'
Message no. IDOC_METADATA455
Diagnosis
No RFC destination has been maintained for logging on to this system for the port SAPERP.
This means that no structure information can be provided for this port.
Procedure
Maintain the required RFC destination for this port.
Can some one help me to solve this problem?
Thank you very much!
regards
HolgerHI Holger
You need to have a RFC destination created for XI server type 3 (ABAP) to push IDOC from ECC. Similarly you need RFC destination in XI towards ECC to load IDOC / RFC metadata.
Thanks
Gaurav -
About Sun Certified Web Component Developer for the Java 2 ... course
i want to know if i take the Sun Certified Web Component Developer for the Java 2 course,then could i write j2EE application with oracle envirmet and the websphere enviriment or should i take extra course if i mant to work in any of these enviroments
You can write j2EE application for all this enviroments. The code is the same, with little diferences in the applicantion servers configuration files.
For more information try: http://www.sun.com/training/certification/java/java_busj23e.html
"The Sun Certified Web Component Developer for J2EE Platform certification exam is for Sun Certified Programmers (any edition) who are using the Java technology servlet and JavaServer Pages (JSP) application program interface (APIs) to develop Web applications. Prior to beginning the Sun Certified Web Component Developer program, you must be a Sun Certified Programmer for the Java platform (any edition)."
"The Sun Certified Business Component Developer for the Java 2 Platform, Enterprise Edition 1.3 exam is for programmers and developers who are responsible for designing, developing, testing, deploying, and integrating Enterprise JavaBeans (EJB) applications. It is also for those specializing in leveraging the Java 2 Platform, Enterprise Edition (J2EE platform) technologies used to develop server-side components that encapsulate the business logic of an application. Prior to beginning the Sun Certified Business Component Developer program, you must be a Sun Certified Programmer for the Java platform (any edition)." -
No nutrient listing maintained for the nutrient group
Hi Team
I have maintained the nutrients in the nutrient group. I have given the area, UOM. I can find the nutrient group in the drop down while chaning the recipe. But once i select the nutrient gorup i get the warning message "No nutrient listing maintained for the nutrient group." I am not able to understand what's wrong. This error i am facning in PLM web UI not in ECCDear,
Planning file enteries in OMDO for every plant then system will atomatically update the planning file for every material that have valid MRP data.
If MRP is active for the plant and you have maintained the MRP views then planninf file enteris will be automatically made by the system when there is change relavant to MRP.
Check table MDVM to see whether there is an entry created after executing transaction MD20?
You can also run program RMMDVM20 to create planning entries.
MDAB : Set up planning file entry in background
MDRE : Check planning file entry
Can you check the MRP type for the material in material master (MM02)?
Please check and come back.
Regards,
R.Brahmankar -
Web server only accessing the default web folder.
I have the web folder for my domain specified in the web folder on my server as: /Library/WebServer/Documents/whp/
But when I enter the domain in a web browser, it goes to the home page in the /Library/WebServer/Documents/ instead.
The IP address is set to any and the port is 80.
Any idea what I am doing wrong?
Mac Book Pro Mac OS X (10.4.8)The website name you're typing into your web browser must exactly match either the domain name you have entered in Server Admin for the site, or an alias (under "Aliases"). So, for example, "example.com" and "www.example.com" do not match.
MacBook Pro Mac OS X (10.4.8) -
I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
No properties can be maintained for the selected node (MTE)
Hi!
I would like to set up the user defined alerts, e.g. Shortdumps frequency for satellite system from SOLMAN.
The access of the MTE on the satellite system goes without any problem
(<SID>\...\R3 Abap\Shortdumps frequency)
When I set up this alert via System Monitoring and try to access it by double clicking I get the following error: No properties can be maintained for the selected node (MTE).
Has some one some ideas how to solve this problem?
Any helpful information will be appreciated.
regards
ThomHi,
Please ensure you have enough(like S_RFCACL) authoraization in both Solman and Your satellite system
Check here [Solution Monitoring - Regarding MTE|Solution Monitoring - Regarding MTE]
Thanks,
Jansi -
Assessable value not maintained for the material X
Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports. -
Calculate teh tax maintained for the PO line items
I need to calculate teh tax maintained for the PO line items...how do i do it????
can somebody help??
kanishakHi,
Use this FM to get data from KOMP
tax amount = komp-mwsbp
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
Regards
Krishna -
How does vendor determine if no info record is maintained for the material
how does vendor determine if no info record is maintained for the material
Hi
If you have to determine a vendor, the minimum requirement is Info record. Beyond that, you can ofcourse maintain Source Lists, Quota Arrangements but Info record is bare minimum for automatic determination of vendor.
Otherwise, you have to maintain the vendor manually in th Purchasing docs.
Tcodes for Info record are ME11, ME12, and ME13.
Hope this clarifies.
Thanks -
RFUMSV25 - deferred tax- error FR472 - No target maintained for the tax on
Hi gurus!
When I run RFUMSV25 for Transfer postings for deferred tax I get this error:
Message no. FR472
No target maintained for the tax on sales/purchases code selected
I have trouble solving this, cause this error doesn't occure in our testing enviroment but only in production.
Thanks!
MarinaHi Marina,
As you might be knowing, the report RFUMSV25 is run for transfer posting from the main tax code to a deferred tax code. As the name suggests, you have to maintain a target tax code for each main tax code.
Hence, in tcode FTXP, create a deferred tax code. Say for V1 you can maintain a deferred tax code X1.
Then go the main tax code, say in our example V1
Click on the properties tab, and assign the deferred tax code X1 in the 'Target tax code' field.
Regards,
Mike -
Sun Certified Web Component Developer for the Java Platform, Enterprise Edi
I would like to take up the exam "Sun Certified Web Component Developer for the Java Platform, Enterprise Edition 5". Could you please suggest me the right book for it?
Does this one helps? ----Head first servlets and jsp
Whihc version I have to choose?That book is a very decent start, but it does not cover everything you need to know. I would also get "core servlets 2nd edition", which you can download for free here:
http://pdf.coreservlets.com
I would skim these two books to see which topics they cover, then check it against the list of requirements you will find on this page:
http://www.sun.com/training/catalog/courses/CX-310-083.xml
to see what you are missing. -
Error: IP Address or Server Name for the Licences Server
I am getting this error after installing SAP Server and after that the client. But the Error keep Comming back:
IP Address or Server Name for the Licences Server.
Regards,
Faisal BalochHi faisal,
Ca you please elaborate more on this like, which version & module you have installed the server on? like solution manager etc.
Thanks
M. Nizam -
T-Code J1INCERT:Acknowledgement number is not maintained for the quarter
Hi Gurus
While executing the T-Code J1INCERT, the system throws the following error:
Acknowledgement number is not maintained for the quarter
Message no. J1IN016
But we have maintained the Acknowledgement number in Table: J_1IEWT_ACKN,
Please throw some lights on it.Hi....
You have to update to this table : J_1IEWT_ACKN_NUM or J_1IEWT_ACKN_N at quater level (Q1,Q2,Q3) ,after that you have maintain the number ranges based on the Object name : J_1ICERT,J_1ICHLNNO, in SNRO t.code
I hope will get solution...
Regards
vamsi
Maybe you are looking for
-
Can I use my debit card to purchase from iTunes? I don't have a credit card
From my iPod touch
-
Doubt in BDC session method program
hi, I tried to execute this program..i am getting error in the bolded line..can you give suggestions.. REPORT ZPRABA1. TABLES:LFA1. DATA:BEGIN OF IT_ITAB OCCURS 0, LIFNR LIKE LFA1-LIFNR, LAND1 LIKE LFA1-LAND1, NAME1 LIKE LFA1-NAME1, END OF IT_ITAB. D
-
Hi, We are planning on putting Active/Standby pairs of ASA CSC bundles at three of our sites. We would also like to use these pairs as SSL head end devices. The question is whether we really need to purchase two sets of SSL licenses (and for that mat
-
Where can I find CRM best practice document
Dear all, I need the best practices document for CRM 7.0. Where can I get this document( I do have the sap service ID from my customer) Regards PG
-
OWB_DEMO: Validation resets my changes in AGGREGATOR-Operator
After Installation of the samples owbdemo_files on Oracle EE 11g I get the (known) error. In the project OWB_DEMO I get on the MAPPING of LOAD_SALES the error: VLD-1011: Der Datentyp von OUTGRP1.FINISH_MONTH in AGGREGATOR (NUMERIC) ist nicht mit dem