Query not ended properly..
hi frenz
I am running this program , taking data froom a file n passing it between th IN clause but when more that 100 values are passed to
it gives thae error that "Query not ended properly.."
plz help as soon as posible
String query = "SELECT * FROM "+service+"."+fileName + " where " + fileName + "." + colNames[0] + " IN (";
System.out.println("Curr Qry >>> "+query);
try {
String newFile = filePath+fileName+".CTL";
bufWrite = new BufferedWriter(new FileWriter(newFile));
bufWrite.write("LOAD DATA INFILE * APPEND INTO TABLE " + service + "." +
fileName + "\n");
bufWrite.write("FIELDS TERMINATED BY '" + delimiter +
"' OPTIONALLY ENCLOSED BY '\"' (");
for (int x = 0; x < fileDataFormat.length; x++) {
bufWrite.write(fileDataFormat[x]);
counter = 0;
while (counter < dateFields.length) {
System.out.println(" checking >> "+fileDataFormat[x]+" with >>> "+dateFields[counter]);
if (fileDataFormat[x].equals(dateFields[counter])) {
bufWrite.write(" DATE 'yyyymmdd' ");
System.out.println("EQUALITY check >>> "+fileDataFormat[x]+".equals("+dateFields[counter]+")"+fileDataFormat[x].equals(dateFields[counter]));
counter++;
if ( (x+1) != fileDataFormat.length) {
bufWrite.write(",");
bufWrite.write("\n");
bufWrite.write(") BEGINDATA \n");
bufWrite.flush();
con = SQLUploader.getConnectionObj(uName, uPass, driver, url);
System.out.println("1111");
//Check the code from here
enumer = hash.keys();
String personId = null;
while (enumer.hasMoreElements()) {
//Getting personid's in array
personId = (String) enumer.nextElement();
vector.add(personId);
qryBuff.append(personId);
ctr++;
if (ctr != hash.size())
qryBuff.append(",");
query += qryBuff.toString() + ")";
System.out.println("Query generated >>> " + query);
stmt = con.createStatement();
rs = stmt.executeQuery(query);
Unreadable. Use code tags
Awful code. Appears to be a muddled mess to me.
That doesn't look like ANSI standard SQL to me. Which database uses "FIELDS TERMINATED BY"?
Some databases have a max query length and a limit to the number of entries in the IN clause. Maybe you've hit that.
Print out the SQL you've generated and see if it's correct. Hard to tell in code.
You should use PreparedStatement if your query involved Dates.
All that writing is confusing and messy. I'd prefer something like Log4J that I could turn off and on.
%
Similar Messages
-
Excel process does not end properly
Hello All.
I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
Best Regards.
Moshi.Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
You must double check all references and add approporiate dispose/close commands for every one of them.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
OdiStartScen threw "The scenario did not end properly" Exception
Hello,
I tried to use ODI to do the "CDC", but OdiStartScen, which i used to start the scenario continually, threw "The scenario did not end properly" Exception at the end of process of my package. The process is "OidWaitForLogData --> extend window --> interface --> purge window --> OdiStartScen";
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)
OdiStartScen "-SCEN_NAME=JOURNALIZEPACKAGEDEMOSCEN" "-SCEN_VERSION=002" "-CONTEXT=GLOBAL" "-LOG_LEVEL=5" "-SYNC_MODE=1" "-ODI_USER=SUPERVISOR" "-ODI_PASS=d,yXgLJMwXJsIhe0qMX.X9PPn"
Does anyone have an idea of what is the problem ?
regards(From ODI user's guide/MODEL/ Change Data Capture)
Using Changed data in Consistent journalizing is similar to simple journalizing regarding interface design. It requires extra steps before and after processing the changed data in the interfaces, in order to enforce changes consistently within the set.
Operations Before Using the Changed Data
The following operations should be undertaken before using the changed data when using consistent set journalizing:
Extend Window: The Consistency Window is a range of available changes in all the tables of the consistency set for which the insert/update/delete are possible without violating referential integrity. The extend window operation (re)computes this window to take into account new changes captured since the latest Extend Window operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from other journalizing operations.
Lock Subscribers: Although the extend window is applied to the entire consistency set, subscribers consume the changes separately. This operation performs a subscriber(s) specific "snapshot" of the changes in the consistency window. This snapshot includes all the changes within the consistency window that have not been consumed yet by the subscriber(s). This operation is implemented using a package step with the Journalizing Model Type. It should be always performed before the first interface using changes captured for the subscriber(s).
Designing Interfaces
The changed data in consistent set journalizing are also processed using interfaces sequenced into packages.
Designing interfaces when using consistent set journalizing is similar to simple journalizing, except for the following differences:
The changes taken into account by the interface (that is filtered with JRN_FLAG, JRN_DATE and JRN_SUBSCRIBER) are not automatically purged at the end of the interface. They can be reused by subsequent interfaces. The unlock subscriber and purge journal operations (see below) are required to commit consumption of these changes, and remove useless entries from the journal respectively.
In consistent mode, the JRN_DATE column should not be used in the journalizing filter. Using this timestamp to filter the changes consumed does not entirely ensure consistency in these changes.
Operations after Using the Changed Data
After using the changed data, the following operations should be performed:
Unlock Subscribers: This operation commits the use of the changes that where locked during the Lock Subscribers operations for the subscribers. It should be processed only after all the changes for the subscribers have been processed. This operation is implemented using a package step with the Journalizing Model Type. It should be always performed after the last interface using changes captured for the subscribers. If the changes need to be processed again (for example, in case of an error), this operation should not be performed.
Purge Journal: After all subscribers have consumed the changes they have subscribed to, entries still remain in the journalizing tables and should be deleted. This is performed by the Purge Journal operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from the other journalizing operations.
To create an Extend Window, Lock/Unlock Subscriber or Purge Journal step in a package:
Open the package where the operations will be performed.
Drag and drop the model for which you want to perform the operation.
In the Type list, select Journalizing Model.
Check the option boxes corresponding to the operations you want to perform.
Enter the list of subscribers into the Subscribers group if performing lock/unlock subscribers operations.
Click OK. -
List of Character which cause Query not work properly
I want the List of characters and resolution which can leads the SQL query to not work properly
LIKE
Problem: Single Quotes " ' " in SQL query.
Solution: Use one more single Quotes
Example: Select 'D''Sa'as EName from dual;
Please provide all Such special cases so I take care while developing my application.That's what I ment by 'copied to every other iBook I have to create in this series' ( I mean 'linked in ePub export pop up').
I use a small CSS file containing what I need and have no surprises anymore. I learned a lot this weeks...
And concerning InDesign (as I always say in the IT-world): For every solution there is a problem...
Cees
information designer -
ORA-00933 SQL COMMAND NOT END PROPERLY
I face problem on this query________________
"SELECT channel.channel_id,Channel.PANEL_ID, Channel.STRIP_ID, Channel.CHANNEL_NAME,Control_system_tag.CS_TAG_NAME,Control_system_tag.CS_TAG_ID,Component.CMPNT_NAME,Component.CMPNT_ID " _
& "FROM Channel LEFT JOIN Control_system_tag ON (Channel.CHANNEL_ID = Control_system_tag.CHANNEL_ID) AND (Channel.STRIP_ID = Control_system_tag.STRIP_ID) AND (Channel.PANEL_ID = Control_system_tag.PANEL_ID)LEFT JOIN Component ON Control_system_tag.CMPNT_ID = Component.CMPNT_ID " _
& "WHERE ((Channel.PANEL_ID)=" & lPanelId & ") AND ((Channel.STRIP_ID)=" & lStripId & ")) order by channel.channel_id"
sql command not properly ended
Could anybody tell me what is a problem in my query?
ThanksTry by removing a ")":
)) order by channel.channel_id" becames
) order by channel.channel_id"
Bye
Acr -
ABAP Query not transporting properly
Hi,
I m trying to transport an ABAP Query and infoset together in a single change request. The infoset of query has generated fine except for some warnings about currency. And the query is also running fine on development. But when I transport the infoset and query together to the quality client the transport log shows the transport as successful, but doesnt show the.
Activate inactive runtime objects at all.
Also the query and infoset have not been transported, I checked in SQ02.
Please see the transport log below. I dont know what I m doing wrong. I cant move the infoset and query separately to production, I have to move them together. Any suggestions, will give points for the right answer. Thanks for reading
QTD Master Data QA
600 Selection for Import 11/30/2006 17:08:14 (0) Successfully Completed
Check Versions 11/30/2006 17:13:03 (0) Successfully Completed
600 Selection for Import 11/30/2006 17:13:50 (4) Ended with Warning
600 Import 11/30/2006 17:14:30 (0) Successfully Completed
5 Import steps not specific to transport request
Feedback after export or import 11/30/2006 17:13:15 (0) Successfully CompletedHi
After transport the request from original system to destination system, you have to do the import.
So run trx SQ02, Enviroment->Transports
Here you should be in the same screen where you have created the request.
Now choose <b>IMPORT</b> options,<b> Overwriting allowed</b> chekbox ans insert the request number in <b>Dataset with imports</b>.
Max -
I have a simple inventory query where the user can input a
search term, and a price span in 2 text boxes, named p1 and p2, the
search box is named s.
When I just change the price boxes and submit, it works
perfectly, but if I put anything in the search text box, it always
returns 0 records, even though I know it should be returning
hundreds of records. The real kicker here is that when I copy the
query submitted to the db in the debugging section, and I paste it
directly into the access database, it runs perfect.
What could make it run perfect in the db directly, but not
return any records when sent via CF?
Any suggestions would be helpful, thank you, and the CF code
is listed below, then below that the code found in the debugger
with my sample search.Welcome to the world of non-standard SQL. ANSI standard SQL
is a myth. Trial and error and experience is the only solution. Not
only are things vastly different between the database players (even
those that purport to be ANSI compliant), things are even different
amongst the different drivers (ODBC, JDBC, OLE, Native, etc.) that
you can use to go against those databases. Typically Database
differences will simply crash. With Driver differences, anything
can happen, although they are typically more restrictive. They will
often not allow certain keywords or constructs to pass through even
though the DB supports it. -
Absent of Alpha routine : Query not running properly
Hi All,
We are facing below problem in execution of query,
Problem: We have forgot to set ALPHA routine property in some info object and loaded full data in the data target,
But when we run report without leading zero, the query is giving wrong output
Ex:
Data in target: 0000201
Data in Query: 201
For above selection report will give wrong result because absent of ALPHA routine lead 0000201 and 201 as different value.
Constrains: We have loaded millions of data in targets so we couldnu2019t delete and reload data
Please provide me some valuable input to overcome above problem.If you are lucky you are still on BW3.5. In that case there is an ABAP that can do the correction for you.
In BW7.0 this ABAP is not working anymore and no support is available for alpha correction. The only solution that I see is indeed reload all data.
If you have an ODS before your cube and work with delta, you could:
- create another IOBJ with ALPHA.
- fill this IOBJ from the first IOBJ via transformation rules or analysis process
- add new IOBJ to ODS and CUBE and adapt transformation rules
- generate new (fresh) index on CUBE
- replace old IOBJ by new IOBJ in queries
Or, alternative:
- create a new cube with the new IOBJ and without the old IOBJ
- load the new CUBE
- rebuild queries on new cube
- discard old cube -
hi,
I am using checkbox in my application which has different lov.
suppose there is checkbox sport with lov cricket,football etc.
now a user can select more than one value .
Suppose user select both cricket and football.
user mail address is also stored in table.
On a page i have used list if any one select cricket from the list user who have select cricket must receive mail ,the cursor i have written is
DECLARE
CURSOR U_MAIL IS SELECT MAILID FROM USERINFO1
WHERE (instr(':'||:P13_SELECTLIST||':',':'||sports||':')>0 or
instr(':'||:P13_SELECTLIST||':',':'||entertainment||':')>0 or
instr(':'||:P13_SELECTLIST||':',':'||education||':')>0 or
instr(':'||:P13_SELECTLIST||':',':'||finance||':')>0)
MAILUSER VARCHAR2(40) ;
BEGIN
OPEN U_MAIL;
IF U_MAIL%ISOPEN THEN
LOOP
FETCH U_MAIL INTO MAILUSER;
EXIT WHEN U_MAIL%NOTFOUND;
HTMLDB_MAIL.SEND(
P_TO => MAILUSER,
P_FROM => '[email protected]',
P_BODY => :P13_TEXT,
P_body_html =>'<html><body>'||:P13_TEXT||'<br></br><IMG SRC ="http://htmldb.oracle.com/pls/otn/wwv_flow_file_mgr.get_file?p_security_group_id=143055126452435142&p_fname=untitled1.bmp"/></BODY></HTML>',
P_SUBJ => :P13_SUBJECT);
END LOOP;
CLOSE U_MAIL;
END IF;
END;
in my case if any user select only cricket then he use to receive mail,but if he select both cricket and football ,and from list if i select football then mail is not received by him .pls any one can help me out.what change should i make in cursor.In table checkbox values are stored as colon seperated(cricket:football)Mak,
If P13_SELECTLIST contains one value like 'football' and the sports column contains 'cricket:football' then the following use of instr is incorrect: instr(':'||:P13_SELECTLIST||':',':'||sports||':')>0You want: instr(':'||sports||':',':'||:P13_SELECTLIST||':')>0Scott -
Migrated 3.x query not working properly
Hi All,
I am migrating existing 3.x queries in system to BI 7. Some queries are showing strange behaviour like when i am executing them in analyzer the results are perfect. When i am executing same queries on web through query designer or through a web template all the Key figures are coming completely balnk.
What may be the reason?? pls guide.
Regards:
Jitendra
Edited by: Jitendra Gupta on Apr 22, 2010 4:09 PMWelcome to the world of non-standard SQL. ANSI standard SQL
is a myth. Trial and error and experience is the only solution. Not
only are things vastly different between the database players (even
those that purport to be ANSI compliant), things are even different
amongst the different drivers (ODBC, JDBC, OLE, Native, etc.) that
you can use to go against those databases. Typically Database
differences will simply crash. With Driver differences, anything
can happen, although they are typically more restrictive. They will
often not allow certain keywords or constructs to pass through even
though the DB supports it. -
hi guys,
actually,i am dealing with one query for which there is one problem.when i am trying to run the query,it is not taking updated values for one of the key figures.
simply put,while running query one of the values for the report is not getting updated/executed.
what can be the possible solution(s) for that?please suggest and guide on this
Regards,
N.RAJA SEKHARhi,
i want to know whether the query is built on the master data object.
if so it will take the old value.
so create a infoset on this master data object and in menu select goto->global properties afrom which check most recent reporting infoobject.
pls assign points if helpful. -
Inner join query not working properly
Hi everyone,
It does not gives any error, but it is not fetching any values...but when i dont include fourth table CSKT AND THE FIELD LTEXT it is fetching the values.
SELECT SINGLE
T1~PERNR
T1~BEGDA
T1~ENAME
T1~PLANS
T1~KOSTL
T2~STRAS
T2~PSTLZ
T2~ORT01
T3~PLSTX
T4~LTEXT
INTO FS_TAB
FROM PA0001 AS T1
INNER JOIN PA0006 AS T2 ON T1PERNR eq T2PERNR
INNER JOIN T528T AS T3 ON T1PLANS EQ T3PLANS
INNER JOIN CSKT AS T4 ON T1KOSTL EQ T4KOSTL
WHERE T1~PERNR eq p_pernr.Change like this
SELECT SINGLE
T1~PERNR
T1~BEGDA
T1~ENAME
T1~PLANS
T1~KOSTL
T2~STRAS
T2~PSTLZ
T2~ORT01
T3~PLSTX
T4~LTEXT
INTO FS_TAB
FROM PA0001 AS T1
INNER JOIN PA0006 AS T2 ON T1~PERNR eq T2~PERNR
INNER JOIN T528T AS T3 ON T1~PLANS EQ T3~PLANS
LEFT OUTER JOIN CSKT AS T4 ON T1~KOSTL EQ T4~KOSTL
WHERE T1~PERNR eq p_pernr.
OR
SELECT SINGLE
T1~PERNR
T1~BEGDA
T1~ENAME
T1~PLANS
T1~KOSTL
T2~STRAS
T2~PSTLZ
T2~ORT01
T3~PLSTX
T4~LTEXT
INTO FS_TAB
FROM PA0001 AS T1
LEFT OUTER JOIN PA0006 AS T2 ON T1~PERNR eq T2~PERNR
LEFT OUTER JOIN T528T AS T3 ON T1~PLANS EQ T3~PLANS
LEFT OUTER JOIN CSKT AS T4 ON T1~KOSTL EQ T4~KOSTL
WHERE T1~PERNR eq p_pernr.
as long as the table is not used in where condition, u can use left outter join. -
Firefox sometimes does not end
14.7.2014
Firefox 30.0 (German version) under Win 8.1
Hello,
Sometimes Firefox does not end properly. When Firefox is re-started I get a message saying Firefox
is still running although about 10 minutes has passed between end and the re-start.
Only by killing Firefox in the Task Manager can cure this problem. I use firefox a lot and this occurs about 5 times a day.Firefox Keep running in background, that's why your getting this error
*http://kb.mozillazine.org/Firefox.exe_always_open
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
FOR ALL ENTRIES stmnt. in SELECT query is not running properly
Hello experts,
In my report program, I write one query on table BSIS.
Internal table declaration -
DATA : BEGIN OF DLC_BSIS OCCURS 0,
BUKRS LIKE BSIS-BUKRS,
GJAHR LIKE BSIS-GJAHR,
BELNR LIKE BSIS-BELNR,
SHKZG LIKE BSIS-SHKZG,
BSCHL LIKE BSIS-BSCHL,
AUFNR LIKE BSIS-AUFNR,
HKONT LIKE BSIS-HKONT,
QSSKZ LIKE BSIS-QSSKZ,
DMBTR LIKE BSIS-DMBTR,
END OF DLC_BSIS.
Query as follows --
SELECT BUKRS
GJAHR
BELNR
AHKZG
BSCHL
AUFNR
HKONT
QSSKZ
DMBTR FROM BSIS
INTO TABLE DLC_BSIS
FOR ALL ENTRIES IN IT_BKPF2
WHERE BELNR = IT_BKPF2-BELNR
AND BUKRS = IT_BKPF2-BUKRS
AND GJAHR = IT_BKPF2-GJAHR.
IT_BKPF2 internal table having -- BUKRS - LT01
BELNR - 6400000061
GJAHR - 2009.
And in BSIS database table -- 3 entries are there for the above documnet.
But, in my internal only one entry has come for the same above document.
I think For all entries stmnt. is not running properly. But Why it's not running properly.??
What would be the reason..??
Thanks in advance....!!
Regards,
Poonam.>
Poonam Patil wrote:
> Hello experts,
> In my report program, I write one query on table BSIS.
>
> Internal table declaration -
>
> DATA : BEGIN OF DLC_BSIS OCCURS 0,
> BUKRS LIKE BSIS-BUKRS,
> GJAHR LIKE BSIS-GJAHR,
> BELNR LIKE BSIS-BELNR,
> SHKZG LIKE BSIS-SHKZG,
> BSCHL LIKE BSIS-BSCHL,
> AUFNR LIKE BSIS-AUFNR,
> HKONT LIKE BSIS-HKONT,
> QSSKZ LIKE BSIS-QSSKZ,
> DMBTR LIKE BSIS-DMBTR,
> END OF DLC_BSIS.
>
> Query as follows --
>
> SELECT BUKRS
> GJAHR
> BELNR
> AHKZG
> BSCHL
> AUFNR
> HKONT
> QSSKZ
> DMBTR FROM BSIS
> INTO TABLE DLC_BSIS
> FOR ALL ENTRIES IN IT_BKPF2
> WHERE BELNR = IT_BKPF2-BELNR
> AND BUKRS = IT_BKPF2-BUKRS
> AND GJAHR = IT_BKPF2-GJAHR.
>
> IT_BKPF2 internal table having -- BUKRS - LT01
> BELNR - 6400000061
> GJAHR - 2009.
>
> And in BSIS database table -- 3 entries are there for the above documnet.
>
> But, in my internal only one entry has come for the same above document.
>
> I think For all entries stmnt. is not running properly. But Why it's not running properly.??
> What would be the reason..??
>
>
> Thanks in advance....!!
>
> Regards,
> Poonam.
include the buzei field in selection criteria i have faced the same situation earlier.
always select all the key fields.
varun -
"Your server is not configured properly or your search query has ..."
Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.
Maybe you are looking for
-
FM to get the free good quantity for an item.
Hi alll, I need to populate freegood quantity to ipc. How can i get the free good quantity configured for an item ?. Thanks and Regards shanto aloor
-
Hello Folks, I have an ALV table view, after selecting any line item in the view i have button "DETAIL" which would pop up another view with the details in ALV view again. I have done the below steps but iam unable to get the alv pop-up with details.
-
Hi friends when u attempt to clear the vendor we use f-44 t code the screen shows additional selections but we give normally CHECK the indicator None here some more additional selections when we use them in what scenario we can use additiona
-
Hi all, 1)Do the system have that functionality to auto-clear open items in GRIR? (Auto-clear meaning no human intervention)? Please any one clarrify the above question Thanks in advance Nandha Moderator: Please, search before posting
-
IBooks in Education (UK)
Hi, I'm not quite sure if i'm posting this in the right section of this page but here goes... I work in a school (UK) and we have about 10 iPads but are looking to expand for them to be used for English. I work in a SEN school so the use of the iPads