Query on Enhancement Pack Upgrade/ Installation-Business Functions install

I am working on an Enhancement Pack Upgrade. I have the following questions from the Client, can you please help answer u2013
Scenario u2013 Upgrade from ECC 6.0 to ECC 6.0 EhP4
1 Using Business Function Prediction service, assume SAP recommends 10 Business functions to be installed. We install the 10 business functions and after 6 months the client realizes that there are some more functions which will help business.
a.What does it take to install the additional business functions.
b.Do we have to do the entire EhP4 Upgrade again
c.If we have to do the entire EhP4 Upgrade again what happens to the initially installed business functions, will that be overwritten
d.What will be the additional SPDD and SPAU effort to activate the additional business functions, will that be same as the initial SPDD/ SPAU effort.
2 Can we install all the Business functions available in EhP4. What happens if we install all the business functions. What will be the additional effort or overhead in terms of hardware, database, ABAP effortu2026..?
Thanks in advance.

Hi,
1. For installing additional business functions you need to again run the whole EHPI process. But what I feel is even you install more than 1 business function you will be able to activate only 1 business function per system.
2. The initially installed business functions would not go anywhere. You need to select them in your solman before the stack.xml file generation.
3. SPAU/SPDD effforts depends on your system. So no comments.
4. If you plan to install all business functions then you will need good amount of DB space and your upgrade downtime would be high.
Regards,
Nirmal.K

Similar Messages

  • Enhancement Pack Upgrade and Portal Implications

    Hello Everyone,
    We are currently on EHP 4 and running EP/Portal 7.00 SP30 and are planning to upgrade to EHP 6.  Is there a need to upgrade EP when upgrading the SAP landscape to EHP 6?
    We are treating the EHP 6 upgrade as a technical upgrade.  Thus the existing ESS/MSS functionality that we have will remain as Java Web Dynpros.  We are also not planning on implementing HR Renewal with the upgrade.
    Thank you for the help.
    Best Regards,
    Scott

    Hi Scott,
    You wont be having any issues if the SP Level of you EP/Portal 7.00 is 30.
    Please check the note 1496212.
    According to the note if your SP level is less than 18 then you have to upgrade it to 30.
    Your ESS/MSS business Packages will remain the same and for HR Renewal you can deploy its latest Businesspackage.
    We had a similar situation and now, we have successfully implemented latest ESS (in WebDynpro ABAP) and MSS (MSS ADDON) in our old portal 7.00 SP 27 (Backend Upgraded to ECC6 EHP 6)
    Regards,
    Suman

  • Business Function Set: Enterprise AddOns in Solution Manager

    Hello
    For testing purposes I want to activate the Enterprise AddOn EA_PLM in transaction SFW5 inside a Solution Manager 4 installation but no Enterprise AddOn is available. Additionally there is only one Business Function Set called "telco reference pack" with two Business Functions. Do I have to set up something before I can active the Enterprise AddOns? I thought PLM is part of the Solution Manager 4 installation.

    Hello Marc,
    the Solution Manager consists "only" of an CRM-component, the SolMan component itself and the Netweaver 2004s platform. So no PLM (and no Enterprise AddOn) is available. SolMan coves some functionalities of Software Lifecycle Management, but does not include the PLM coding itself. For EA_PLM you need an ERP system.
    Best regards, Alexander

  • Talent Management Enhancement pack 4  Business Function HCM_TCM_CI-1

    This business function contains some new job architecture functionality that we would like to utilize.  These new object types are functional name (FN) and job family (JF).  We do not plan to configure any of the talent management functionality because we will not be using it at this time.  Activating this business function also activates a functionality called Embedded Search which requires TREX 7.1.  We do not plan to do any of the configuration for the embedded search functionality either at this time as we don't think we will need it.
    My question is, is anyone aware of any issues that might arise  or what other SAP functionality that might be impacted by moving this business function into our Production environment without doing any of the configuration.  We have implemented SAP Payroll, Benefits, Org management, Personnel Administration, eRecruiting and Learning.
    Thanks in advance for any advise you can provide.

    Hi Kathy:
    In a nutshell, you shouldn't run into any issue.  You're just going to get a host of new web dynpro apps, OM data, and infotypes for the Central Person (the 74XX infotypes).  If you don't use them, then that's fine, it won't hurt anything.
    You should be just fine using the HRP1001 450 relationships from JF to FN and C to help drive your job architecture.  You would potentially need to use transaction HRTMC_PPOM to manage your job family/functional area relationships, but you won't negatively impact anything you have already implemented.
    If you're not going to use any of the Talent Mgmt functionality, you also don't need to worry about enterprise search or TREX.  I'm assuming you aren't using Succession Planning in eRecruiting, right?  If you do ever consider using the Talent Management functionality you've now implemented, you will have to migrate data over from the old eRecruiting version of Succession Planning.  Other than that, you should be good to go.
    Hope that helps!
    Thanks,
    Chris

  • ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

    When I run the Enhancement Pack Installation, I get a hard failure at the MAIN_SHDCRE/ADJUSTCHK phase.  The error message says "No lines found in logfile matching "UMODPRO\.INX".  The log follows...
    1 ETQ201 Entering upgrade-phase "ADJUSTCHK" ("20111006131443")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ200 Executing actual phase 'MAIN_SHDCRE/ADJUSTCHK'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = 'SAP_MOD_EHP'
    2 ETQ399 Arg[1] = 'ADJUSTCK.ELG'
    2 ETQ399 Arg[2] = 'ADJUSTMT.INF'
    4 ETQ010 Date & Time: 20111006131443
    4 ETQ265 Starting report "RSUMOD01" with variant "SAP_MOD_EHP" in batch
    4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
    4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ311 Batch job "RSUMOD01" with job count "13144400" scheduled
    4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
    4 ETQ232 RFC Login succeeded
    4 ETQ010 Date & Time: 20111006131819
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    1EETQ248 Missing log file(s) of report "RSUMOD01", matching "UMODPROT\.INX"
    What does this mean? 
    Is the backslash supposed to be in the name UMODPROT.INX?

    Hi,
    Please check in SM37 if there is any job failure in the system. And also check if there is any dump.
    Thanks
    Sunny

  • Advice on upgrade from Ecc 6.0 (No enhancement pack) to EHP 7

    Dear Friends
    Our customer is thinking about upgrading  from  ECC 6.0 (No enhancement)  to EhP 7. Can anybody tell me what are major efforts, steps and approx. time and precautions to consider in this case.
    thanks a lot in advance
    Victor

    Hi,
    SAP Library for SAP ERP on the SAP Help Portal at http://help.sap.com/erp. Choose a
    release and then choose Application Help. In SAP Library, choose Business Functions (SAP
    enhancement package 7 for SAP ERP 6.0) -> Business Functions in SAP ERP -> Enterprise
    Business Functions -> Accounting -> Financial Supply Chain Management -> SAP Treasury
    and Risk Management.
    Hope this helps.
    Regards,
    Jyoti

  • Security upgrade with Enhancement pack 4 on ECC6

    Hi Everyone,
    Perhaps you already know SAP is prompoting upgrade via Enahncement packs
    so we have upgraded  ECC6 with Enhancement packs 4 and now that we have doen this , if you want to create a role in PFCG this prompts tp peform steps 2A to 2C in SU25
    my question is
    1.Did any one upgrade  to EPH4 on ECC6
    2.If you did , did you perform the steps ( 2A to 2C in SU25)
    3.And also if you perform 2A and 2B , does this already write entires in PFCG ?
    Any thoughts ?
    Regards
    Mark

    Hi Mark,
    > 1.Did any one upgrade  to EPH4 on ECC6
    -->not me
    > 2.If you did , did you perform the steps ( 2A to 2C in SU25)
    --> 2A-C shall be executed after any SP implementation to get the changes from SAP into your tables/roles....
    > 3.And also if you perform 2A and 2B , does this already write entires in PFCG ?
    -->no
        only 2C, but after you have run 2A,2B, youll get your authorizations updated in your roles the next time you use the merge-authroizations function in PFCG
    b.rgds,
    Bernhard

  • Business functions to be activated after EHP4 upgrade

    Hi All,
    I have recently upgraded ECC 6.0 to EHP4.The following technical usages were selected during download.
    Financial Services,Financial Supply Chain Management and Financials.
    Please let me know what all business functions that are to be activasted.
    Do I have to activate business functions for EHP2 and EHP3 as well.Below are the BFs for our usage types.
    Business Function                           Technical Usage                         EHP
    /IBS/EAFS_RBD_BUSOPR                           Financial Services                          4
    EAFS_BCA_BUSOPR                           Financial Services                          4
    EAFS_CML_LOANS_POOLING                Financial Services                          4
    FICAX_BILL_INVOICING                           Financials                                                4
    FICAX_CI_1                                                Financials                                                2
    FICAX_CI_2                                                Financials                                        4
    FIN_FSCM_CCD_INTEGRATION               Financial Supply Chain Mgmt     4
    FIN_FSCM_INTEGRATION                           Financial Supply Chain Mgmnt     2
    FIN_TRM_CORR_FW                           Financial Services          4
    FIN_TRM_INS_HM                           Financial Services          4
    FIN_TRM_LR_FI_AN                           Financial Services          3
    FIN_TRM_LR_FI_AN_2                           Financial Services          4
    FIN_TRM_PSM_INTEGRATION      Financial Services          4
    INS_FSSR_CI_1                           Financial Services          3
    INS_FSSR_CI_2                           Financial Services          4
    INS_FSSR_I18N                           Financial Services          4
    Out of the above FICAX_BILL_INVOICING,FICAX_CI_2,FIN_FSCM_CCD_INTEGRATION,FIN_TRM_INS_HM and FIN_TRM_LR_FI_AN_2 have dependencies like X_CONT or BI_CONT which are not installed on the system.
    I guess I can't activate these business functions.Am I right?
    And I read that only one BF set is activated per one system.I did not find any BF set related to Finance in the drop down list of SFW5 in the system.Please enlighten me on this topic.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on Mar 8, 2011 1:44 PM

    > Thanks for your reply,as I mentioned the list of BFs are applicable for the 3 technical usages I  had selected during EHP4 upgrade.I need to select out of them.
    I understand your question - however, how should anyone else but you know whether you need the functionality behind them? This is a business decision.
    I suggest you use the documentation (press on the corresponding "i" in SFW5) to see if the business requires the functionality. If yes, enable it, if not, you don't need to enable it.
    Some of those BFs will need a BW/BI to work. You have to decide, whether you need them or not.
    Markus

  • Business Functions Switch to activate Enhancement Package 4

    Hi SAP experts,
    can you help me?...
    We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP, but I've been looking for information to know which Business Functions (switch) we need to activate for this scenario, but in all documentation I've been looking doesn't indicate this.
    Can you let me know wich switches we need to activate or share documentation about this?
    Your help is most highly appretiated.
    Regards
    Gonzalo C.

    > We will implement SAP CRM 7.0 with scenario of creation ERP Quations & ERP Sales Orders, therefore we have installed Enhancement Package 4 in our ERP,
    So there was any business reason to install EHP4? Who told you? And those people should also be able to tell you what to activate
    I'd go through SFW5 and click the "documentation" button next to the functions, this will open a browser window explaining what this function is about.
    Markus

  • Performance Issue with RF Scanners after SAP Enhancement Pack 5 Upgrade

    We are on component version SAP ECC 6.0, and recently upgraded to Enhancement Pack 5.  I believe we are on Net Weaver 7.10, and using RF scanners in one plant that is Warehouse Managed.  Evidentially when we moved to EHP5, the Web SAP Console went away and we are left with ITS Mobile.  This has created several issues and continues to be a performance barrier for the forklift drivers in the warehouse.  We see there is a high use of java script, and the processors canu2019t handle this.  When we login to tcode LM00, on a laptop or desktop computer, there are no performance issues.  When we login to tcode LM00, with the RF scanners, the system is very slow.  It might take 30 seconds to confirm one item on a WM Transfer Order.
    1.)     Can we revert back to Web SAP Console, after we have upgraded to EHP5?
    2.)     What is creating the performance issues with the RF Scanners now that we switched over to SAP ITS mobile?
    Our RF Scanners are made by Intermec, but I donu2019t think that is where the solution lies.  One person in our IT Operations has spent a good deal of time configuring SAPITS to get it to work, but still it isnu2019t performing.

    Tom,
    I am sorry I did not see this earlier.
    I'm currently working on a very similar project with ITS mobile and the problem is to accurately determine the root cause of the problem in the least amount of time. The tool that works is found here: http://www.connectrf.com/index.php/mcm/managed-diagnostics/
    Isolating the network from the application and the device is a time consuming process unless you have a piece of software that can trace the HTTP transaction between host and device on both wired and wireless side of the network. Once that is achieved (as with Connect's tool) you can then you can begin to solve the problem.
    What I found in my project is that the amount of data traffic generated by ITS mobile can be reduced drastically, which speeds the response time of the mobile devices, especially with large number of devices in distribution centers.
    Let me know if I can answer more questions related to this topic.
    Cheers,
    Shari

  • Impact of enhancing standard infotypes on service pack upgrade

    Hi SAP experts,
    I have a situation where in we had enhanced standard infotype 14 ( added custom fields to structure CI_P0014) in development systems and moved to production systems. Now these changes should be moved to project system in which the service pack upgrade is in progress. Will it impact the SP upgrade if I move my transports to these systems? Will it overwrite the sp changes for IT14?
    P.S : The support pack was not applied to the system in which the std infotype was enhanced.
    Regards,
    Sameena

    You should re-apply any customer enhancements etc to your development environment after SP's are applied - But only after you have a developer review potential impacts from SP and your development.
    I think you would be fine as IT14 isn't updated often in SP's.
    Cheers,
    Brad

  • Business functions in SAP Upgrade

    Good afternoon
    Uncomfortable asking them for their support
    we are conducting tests to migration to V5 V6 technique in SAP, but we wanted to make
    some validation to determine whether to migrate functional features are enabled only business we want to activate and validate these improvements and new screens and fields, but when doing so, we see that there is some functions were fitted but failed to see nothing else, know whether it is also necessary to activate the desired business function is further supplemented by some configuration?
    thank you hopefully someone can support me
    good morning

    Hi,
    In order to understand impact of activating business like which all transactions will be effected or what new config is delivered, you can generate impact analyzer report for different business function on link http://service.sap.com/erp-ehp.
    Thanks
    Sunny

  • New functionality - Enhancement Packs

    Hey
    my company just got enhancement pack 3 and we are testing some of the functionalities.
    In one of these one can copy from Billing document to CR but I used to get message FX not assigned to CR please check customising.
    That issue has been resolved via trcode VTAF where I created a Target (CR) and Source (FX).  Then I got a message saying that Item category DLN was missing, so  I created that too.
    Now I can create a CR based on a FX but item line is not copied. I get a message but it's quite a long list to check - and I might still not resolve the issue.
    Has anyone tried anything like this before?
    THX
    Ryan

    I solved this myself.

  • Enhancement Pack 2 impact on ESS for ECC 6.0

    We are planning to upgrade one of our systems (evaluation system) from EA-HR 600 to EA-HR 602 (Enhancement Pack 2 SP2)
    There's some ongoing ESS configurations (just ESS) on this evaluation system.
    What is the impact of an Enhancement Pack 2 import/upgrade towards the existing ESS configurations ?
    Has anyone experienced extensive 'overwriting of existing ESS configuration' or does the EnhP 2 introduces new functionalities leaving the existing configurations untouched ?
    Do ESS functional folks have to redo the bulk of their config ?
    Many thanks for any replies.

    Thanks Chris
    Still confused.
    Are you able to tell me what is the latest enhancement pack for ESS, the reason for asking is that I'm looking for more details on the new iViews as contained in Note 1048386 see below
    Thanks
    WB
    In the previous ESS Business Package (BP) version, the links for starting processes were provided in the workset Life and Work Events. With EhP2, the links for starting the processes are provided in the workset that the process belongs to thematically (for example, the process 'Change of Working Time' is provided in the workset 'Working Time'). The following list provides an overview over the processes available in the standard system and the worksets they are assigned to.
    Benefits and Payment
    o Company Loans
    o Membership Fees Sports Club
    o Status Overview
    Working Time
    o Change of Working Time
    o Status Overview
    Own Data
    o Change of Address
    o Personnel File
    o Status Overview
    Life and Work Events
    o Maternity Leave
    o Birth of a Child
    o Termination
    o Status Overview
    The available processes are integrated in the navigation of the ESS Homepage Framework.

  • Enhancement Pack 3 updated Warehouse Numbers with an entry for MLO

    Hello all,
    I am working with a supply chain team, and after the installation of enhancement pack 3, a new warehouse number appeared in the tables.
    Warehouse number MLO.
    None of us can explain it, but the change log lists an SAPK-603DINT object delivered via SAP transport.
    Any thoughts on where the warehouse number came from, or why it got delivered?

    Hi
    Without having looked into the special table entry:
    This term appears in the Online Support System mainly for the functional area "(Extended) Warehouse Management".
    Following the Master Guide for the SAP ERP 6.0 Enhancement Package 3 (among others) developments were made in the SAP Industry Scenario "SAP for Wholesale Distribution - Warehouse Management".
    Following the enhancement package overview presentation https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80b79088-d508-2b10-b497-b1628cb84166 differnet developments in "warehousing", were done in the SAP ERP Core as well.
    If you check out which Business Function you are using (i.e. LOG_MM_CI_2 includes some of these enhancements) you should be able to find out more (see for instance the Business Function documentation in help.sap.com)
    regards,
    Andreas R

Maybe you are looking for