Query owner cannot change query
We are trying to setup security that will permit the following:
Display and Execute all queries
Create queries prefixed with 'REP'
Change and Delete their own queries
The setup below is permitting all of this except that the owner cannot change their own queries. The owner is permitted to create and save a query named 'REP12345'. However, when trying to edit the query using query designer, the user gets the message: You are not authorized to REP12345 Query '3'.
S_RS_COMP
Activity Display, Execute
InfoArea *
InfoCube *
Name (ID) of a reporting compo *
Type of a reporting component Calculated key figure, Query View, Query, Restricted key figure <...>
S_RS_COMP
Activity Create or generate
InfoArea *
InfoCube *
Name (ID) of a reporting compo REP*
Type of a reporting component Query
S_RS_COMP1
Activity Change, Display, Delete, Execute
Name (ID) of a reporting compo *
Type of a reporting component All values
Owner (Person Responsible) for *
I have gotten it to work with the following setup:
S_RS_COMP
Activity Create or generate, Change, Display, Delete, Execute <...>
InfoArea *
InfoCube *
Name (ID) of a reporting compo *
Type of a reporting component Calculated key figure, Query View, Query, Restricted key figure <...>
S_RS_COMP
Activity Create or generate
InfoArea *
InfoCube *
Name (ID) of a reporting compo REP*
Type of a reporting component Query
S_RS_COMP1
Activity Display, Execute
Name (ID) of a reporting compo *
Type of a reporting component All values
Owner (Person Responsible) for *
S_RS_COMP1
Activity Change, Display, Delete, Execute, Enter, Include, Assign
Name (ID) of a reporting compo *
Type of a reporting component All values
Owner (Person Responsible) for $USER
Similar Messages
-
Cannot Change Identities / Email where Submit button emails responses to
I have created, entiriely, in LiveCycle a form. When it is distributed it AUTOMATICALLY inserts my own email to where the repsonses go to. Cannot - REPEAT CANNOT- Alter it.
THIS IS NOT THE SUBMIT BUTTON THAT YOU PUT INTO A FORM.
This is the "Submit" that is automatically generated and put into the PDF TAB when a form is distributed.
I've gone into Acrobat / LiveCycle and changed "identies" but the response STILL goes to my Email. It NEVER picks up my changed Identity - and shows my own email and not the one I want responses sent to.
Rebooted after chainging Identities - STILL goes to my email.
Edited in the Acrobat - STILL - goes to my email - SUBMIT button (automatically created when you distribute the form) ALWAYS says to send to my email.
Edit the options/properties to change - MY EMAIL IS GREYED OUT AND CANNOT ALTER IT IN THE DISTIBUTON panel where you can select options as how the form is distrubited - selecting EMAIL response to form submission.
It ALWAYS SHOWS my Active Directoy LOGON ID as the form OWNER - CANNOT CHANGE IT.
We are IN an Active Directory environemnt and my logon account has NO RIGHTS to change MASTER registry Win7 entries at all - only (like normal) my own preferences - BUT LIVE CYCLE / ADOBE DOES NOT CHANGE ANYTHING with email at all concerning the auto email sent to portion. I can change "sent by" but NOT who I want responses sent to.
Cannot FIND at all any XML preferences file in registry / file system to hack and manually change it.
You look at the XML data in the form and it shows my email address - AND ALL XML data is BLOCKED from being edit at all in the form - and NO idea where it is pulling this information from.
Is there ANY WAY at all to change --- WITHOUT WRITING ANY CODE - to alter where a distributed form is to send email repsonses to.
CANNOT, REPEAT CANNOT - use any cloud, online or any external source at all. Cannot use Acrobat.com.
Thanks,
TomThe email address is coded into the server script file that processes the form data.
Look for the below file on the server and see if you can open it and locate the email address. It's a Cold Fusion file
act_email.cfm -
Frm-40208 from running in query mode. cannot change database fields
Hi,
Could some one help me with this.
I am calling a form from another form. I am passing the parameter list to the calling form and doing a query by setting the block property. But when queries the message
FRM-40208 Form running in query mode. cannot change database fields .
I do not want the message to appear when they go the called form . Please some one could help me how could I avoid displaying the message.
Regards
BainHi,
Good day! I am working with a module that also calls another form. It uses call_form with query mode parameter set to query_only. My problem is, whenever i call the other form using the call_form, it would display the called module and then as it populates the detail block of the called form, it will display frm-40208 from running in query mode. cannot change database fields per record. What I want is for the message to be displayed only once.
I have tried capturing the error by using on-error trigger, but it doesn't go to that whenever the other form was being called. I think the message has to do with the post-query trigger, because it passes some values on a dbase block objects.
Do you have any suggested solutions or workarounds to make the message display only once whenever the other form is being invoked by the call_form?
I would greatly appreciate any suggestions/ideas.
Thanks and regards,
ASantiago -
FRM-40208: Form running in query-only mode. Cannot change database fields.
Hi,
I am using forms 6i where it is calling a form from a menu in query like call_form(,query_only). Now an error is occurring on call of that form ‘FRM-40208: Form running in query-only mode. Cannot change database fields.’ Though this is been handled to give a certain message from on_error message from a package from library.
Now the issue is that the error keeps on popping even after the ok button is pressed. There are number of records from the table. How can we handle the error. Any suggestion would be really appreciated!!!
Regards,
Rajeshthanks Gred but i have resolved the issue. it seems that each row was going into query_only mode (program written such a way). therefore the error was showing even after the OK button. handled the issue from ON_ERROR trigger. anyway thanks for your time Gred!
-
Issue: When using BW Bex query analyzer users cannot change reporting queries. Any attempt to change queries results in errors.
Error: BEx Query Designer: Run-time error '-2147221499 (80040005) Fatal Error - Terminating
Impact: Business reporting is currently being negatively impacted because users cannot modify queries, cannot change filters for fiscal period and fiscal year.
OS / MS Office Suite being used: Vista & Office 2007
Backend System: BW 2.0B
Frontend System: Being a large organization, we have a controlled environment wherein all users will have the following applications installed by default:
1. SAP Client Base 7.10
2. SAP BW 3.5 Patch 4
3. SAP BI 7.10 Patch 900
4. SAP GUI 7.10 Patch 12
Does anyone has any idea as to why we are getting this error? Is it a Vista issue? Is it a front-end issue?Just a thought - did you guys apply any Microsoft security patches before this started happening - we had a similar issue in other SAP application due to MS security update. Raise an OSS with SAP
-
user cannot change password option is automatically getting unchecked while giving domain admin rights
Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers? -
R12: Imported Payables Invoices, cannot change currency code
Hello,
I am importing payables invoices to Oracle AP in batches using Open Interface table.
When viewing an invoice from the batch, the invoices are updatable but I cannot change the currency of the invoice to a foreign one..
Is there a way to change the currency code of an imported invoice?
Oracle release: R12.0.6Hi,
Please check the Supplier Site Invoice Currency and Payment currency options at the Supplier Header and Site level.
Navigate to Suppliers-Entry-Query the supplier for which the forg currency not working-select update->click on invoice management and check the currency at the header and site.
Hope it helps
Regards,
Sridhar -
I cannot change apple id when the app store asks me to update anything
i cannot change apple id when the app store asks me to update anything
App Store products can only be updated by signing in to the store with the same Apple ID that was originally used to download them. You can't update anything, including your own purchases, as long as there are pending updates linked to the other ID.
If you can't sign in with the other ID, you have to delete all the apps that are linked to it. If you don't know which apps those are, see below.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
3. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
4. At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Delete each such item by following the instructions in the Apple Support article linked above.
5. Quit and relaunch the App Store.
If you find these instructions confusing, ask for an alternative method. -
We migrated a server (ldap and file serving) to some new machines, which have new names. We've got all of the login and file sharing functionality working on the new machines, but wherever we have a mount of a share in the Login Items for a user, we can't get the old machine out of the Login Items. It's not fatal, but it does make login take a lot longer because it has to fail first.
We can mount the share from the new server, and save THAT in a NEW Login Item just fine -- it's just that when you click on the old defunct one the minus sign is greyed out, and the mouseover says "You cannot change this item because it's managed by your system administrator." There is a yellow triangle next to the item in the list. Went into the user's ~/Library/Preferences/com.apple.loginitems.plist and it's not in the file. The /Library/Preferences don't have anything that looks like a plist of the right name.
Where do I find it and how do I get rid of it?In response to ManishBhatt94's post today, I may have some information that may be useful to you. I called Microsoft's 800-642-7676 and spoke with a technical representative with questions pertaining to my particular issue. I also have friend that has the
same issue with her computer running windows 8. A representative from my ISP told me how to go into 1)Tools, 2)Internet Options, 3)Connections, 4)LAN settings and uncheck the proxy settings box. However after restarting or shutting down my computer it reappears.
It will also reappears while I play games on Facebook not allowing me continue until I go back into the proxy settings in LAN and uncheck the box AGAIN and AGAIN. A local owner of a computer repair shop told my friend that it was a virus. After speaking with
Microsoft today I was told the same thing/it was more than likely a virus on my personal PC at home. As most people likely do, I use wireless internet in my home on the affected computer. Solution; as suggested by Microsoft rep was to have the virus
professionally removed either by someone or to use their remote service for a fee of $149 which comes with several guarantees and does not require you to re-install software or documents. I hope that my response was of some help to you. I also kept trying
to fix this problem but wasted a lot of time. He also suggested to Google the proxy problem to see if ANYONE has any alternatives to fixing this problem!
-
Hi guys, finally I made it to the apple family by buying an Air from a guy I knew... But I cannot change the ID in the apple store for updates... I managed to change it in Itunes, but when I want to download the updates it would tell me that I should log in with the other account...
Please advise...
Thank you!!!The OS and the preinstalled iLife apps are permanently assigned to the Apple ID of the original owner. You need to ask the original owner to call Apple Care and request that the Mac be released from his Apple ID.
The only secure way to use a second hand Mac is to erase the HDD and install a fresh version of OS X.
The only version of OS X that the original owner can pass to you is the version of OS X that came preinstalled on the Mac. The original owner cannot legally pass to you any apps that he bought in the MAS. -
Exchange 2010 Public Folders Cannot Change Permissions Errors from Management Console and Powershell
This problem does not affect new public folders, only old ones that have probably been on Exchange 2000/2003 servers in the past. Migrations I believe did go smoothly but now have errors.
Error Reported is:
Microsoft Exchange Error
The following error(s) occurred while saving changes:
Add-PublicFolderClientPermission
Failed
Error:
Failed to modify the MAPI.NET table property of the object "000000001A447390AA6611CD9BC800AA002FC45A030064004E9CC2F8DD46B5E1E4578DE6D8030000000278E90000" on server "FQDN.Server.Name". See inner exception for more information.
MapiExceptionNonCanonicalACL: Unable to modify table. (hr=0x80004005, ec=2409)
Diagnostic context:
Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=218]
Lid: 56871 EMSMDBMT.EcDoRpcExt2 returned [ec=0x0][length=356][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropModifyACL [64]
Lid: 17082 ROP Error: 0x969
Lid: 27745
Lid: 21921 StoreEc: 0x969
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropModifyACL [64]
Lid: 22086
Lid: 27128
Lid: 27232 StoreEc: 0x8004010F
Lid: 27128
Lid: 27232 StoreEc: 0x8004010F
Lid: 22086
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x3D210102
Lid: 19149 Error: 0x0
Lid: 24509 Error: 0x0
Lid: 31229 Error: 0x0
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 6671 StoreEc: 0x8004010F
Lid: 24976
Lid: 24952
Lid: 25472
Lid: 7972 StoreEc: 0x969
Lid: 26532
Lid: 4920 StoreEc: 0x969
Lid: 5119 StoreEc: 0x969
Lid: 5247 StoreEc: 0x969
Lid: 17916 StoreEc: 0x969
Lid: 4814 StoreEc: 0x969
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x969
Lid: 29150
Lid: 20446 StoreEc: 0x969
OK
From ExFolders we get error "Exception: Object Reference not set to an instance of an object"
Any thought on how to fix permissions, people who already had permission in the past can see and access them OK and all objects, but we cannot change/update or remove permissons
We alos receive similar error from the powershell.Hi,
Could
you please add a new public folder hierarchies with ADSIEdit as following setups.
For how to use ADSIEdit ,you can access:
http://technet.microsoft.com/en-us/library/cc773354(WS.10).aspx
1.Run ADSIEdit, right click Exchange Administrative Group under “Configuration \ services \ Microsoft
Exchange \ Organization name \ Administrative groups”.
2.Select New Object.
3.Select msExchPublicFolderTreeContainer for the class and click Next.
4.Enter the following for the value:
Folder Hierarchies, click Next.
5.Click Finish.
6.Create
Public Folder Tree Object.
7.Right click CN=Folder Hierarchies -> New Object.
8.Selected msExchPFTree for the class.
9.For the value we entered, "Public Folders" and clicked next.
10.Clicked on the "More Attributes" button, selected msExchPFTreeType .
11.Set the value
to 1.
Note: This is very important that this value is set
to a value of 1 as This tells Exchange that this is a MAPI Tree.
12.Click Ok and then finish.
13.We then went
to the properties of the newly created "Public Folders" Tree object in
ADSIEdit.
14.Copy the distinguished name value
to the clipboard and then click cancel.
15.Navigate
to the Storage group that contains the Public
Folder Store for this server and get properties of the server.
16.Locate the msExchOwningPFTree attribute and paste in the value that was copied
from the Public folders Distinguish name attribute.
17.Restart the Information Store Service.
18.Mounted and dismount the PF store.
19.Open Outlook with administrator,give full permission to default owner.
Hope it can help you! -
Big Permissions Problem: "You Cannot Change The Contents Of This Folder"
I installed Tiger some time ago (and need to upgrade now from 10.4.6 to 10.4.9).
I haven't used it much since some of my software will only run under Panther.
In any case, I'm using it now and have been having big permissions/user accounts problems.
I have two users on the computer "robert" and "ra", both with admin privileges (I set up two because I was trying to get around these problems -- I'd be very happy with just one).
I have 10.4.6 installed on an external HD and boot from that into Tiger (I have Tiger on another external HD as a backup, and my main HD in the iMac has 10.3.9 -- that's what I boot from when I need to run older programs).
In any case, both "robert" and "ra" have ADMIN privileges. But I get weird ownership problems. For instance, if I am logged in as "ra" and try to play a Realplayer file streaming from the web (in Firefox 1.x), I get the error
/Users/robert/Desktop/307e6wz7 could not be saved, because you cannot change the contents of that folder.
I check the ownership of the "Desktop" folder -- read/write for "ra".
If I right-click I can save the Realplayer file to the desktop.
Same with other links.
I've also noticed other ownership problems (blocked folders at finder level) but can't duplicate tonight. Is this an obscure error, or is there something amiss in ownership recognition? Is there some way I can sort all out? Login in as "root" and set all right?
Thanks
G4 iMac Mac OS X (10.4.6)Yes they do. When you installed them you dragged these particular apps to the Applications folder. Doing so automatically attributes the program with the ownership attributes of the account owner who installed them - 'robert.'
Proper application installers install apps under the system/admin ownership. You can try to fix these apps by changing their permissions:
Select the app and CTRL-click to open the contextual menu. Choose Show Package Contents from the contextual menu. Select the Contents folder and press COMMAND-I to open the Get Info window. In the Ownership and Permissions section click on the tiny arrow icon to expose the panel. Click on the little lock icon to authenticate. Change permissions as follows:
Owner = system with Read/Write privileges
Group = admin with Read/Write privileges
Other with Read-Only privileges
Click on the Apply To Enclosed Items button. Close the lock by clicking again on the lock icon. -
This wifi issue is bad, all other products I have work fine, but my iPad (fully update, re-installed, re-booted, etc...) will not work. Time to return it and switch to another vendor? Many of the solutions I see are change your router. I cannot change a Hotel router, a companies router! Please Apple fix this ASAP prem price and not working!
the iPad should work with most wifi routers. There are some old wife routers it may not. Your ipad coiuld have a hardware problem.
Does it work with some routers? Have you hung out in the lobby of the hotel and asked if other ipad users are having a problem. What does the hotel staff say?
You could carry a mini wifi router with you and connect the mini via ethernet cable.
Find the make and model of the wifi router. We can check if other ipad owners are having problem.
a 4g solution.
I recently signed up for FreedomPop.com. http://www.freedompop.com
FreedomPop provides 500meg of free 4g cellular data per month! You do need to buy their wireless device at $39. Your machine needs wifi capability. There are ways of getting bonus megs. One gig of addition data costs $10 per month. I used about 15megs per hour of lite internet surfing.
When signing up, you need to be careful with your selections. On some screens, the free option is a small link below the large button. FreedomPop employs a Pavlovian Dog < Operant conditioning > thing of getting you used to clicking on the large button then they change the large button to a paid add-on.
Once you setup your account, you need to go to your account options screen to turn off automatic paid data download once you exceed your quota.
The performance seems a little slower than my DSL connection.
http://www.freedompop.com/offers.htm?experience=organic.default
http://www.freedompop.com/coverage
Get it before they go broke.
Robert -
Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?
Yes it sounds like you have a corrupted preference file.
The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
For your case I beleive the preference file is
com.apple.desktop.plist
Maybe you are looking for
-
I connected my iMac's to a Airport Base. I was able to successfully get the 17" to print through the base but the 20" tells me it has a -9672 error when it tries to connect with Bonjour. I figure the difference is because the 17" is using driver vers
-
Error message trying to sign in
I can sign in on my PC but not on my ipod touch. I was able to connect on the touch last week, with the same user and PW. Today I get an error message.....ACCOUNT: DB_IO_ERROR. Help please...
-
My iMac is sooo slow... Why??
Hi, I have an iMac bought in 2011. Processor: 3.2 Ghz Intel Core 13 / OS X Lion 10.7.5 / I have 1.33 TB FREE out of 2TB Its so slow! when starts its almost a minute to start using it, the same when "it goes to sleep", every time I touch my keyboard
-
Hello, I want to use another JDBC driver because the driver that Aurora uses is fault while I'm connecting to the remote database from my Java stored program. I've loaded the new driver_classes.zip with loadjava in SCOTT schema, all classes are valid
-
How can I get iCloud on my iPod Touch?
I have downloaded the new iTunes 10.5 but still can not get iCloud to come up on my iPod Touch nor on iTunes (windows Vista). The website states that it should automatically come up once I plug in my device onto iTunes, but it does not. I have even