Query Tables Does Not Fill Down Formulas When Refreshed

I have used external data queries for several years, connecting to a variety of data sources, but most frequently to SQL server 2005 using MS Query and ODBC. Anyway, in Excel 2007, when I refresh my queries and the data range adds new
rows to the query table, the formluas do not fill down past the previous extent of the data range. These are not external queries converted from a previous version of Excel; I built them in Excel 2007, and the issue persists across multiple workbooks.
To answer the inevitble suggestions:
1) The formulas are definitely in the query tables, not adjacent.
2) "Extend data range formats and formulas" is enabled in the advanced tab of Excel options.
I've found threads on other sites where users had similar problems, but have not seen a satisfactory solution or even a good response to their inquiries. Any ideas?
P. Dolan
Stat Analyst, TN Dept of Safety

I have the same issue with excel 2010. To answer Ryan's last question, Excel does seem to consider all the added rows as begin part of the table. On the pre 2007 queries, there was an option under 'External data properties'
to specify whether you wanted the formulas to copy down to the new rows. When this option was selected, it worked without fail. Under 2007 and 2010 this option no longer appears, but most of the time the formulas do copy down properly, but eventually
something happens to cause this to stop occuring. The only fix I have found is to recreatet the whole query again. It then works for awhile and then stops working at some point. I wish I could isolate what causes it to stop, but I haven't been
able to figure it out.
Same with me and Excel 2010. The help refers to the option, but my dialog box does not have it. (Another option that has disappeared is the ability to get column headers derived from the returned query.)
Excerpt from help:
On the Data tab, in the Connections group, click
Properties.
In the External Data Range Properties dialog box, select the
Fill down formulas in columns adjacent to data check box.

Similar Messages

Frm- 40505 Unable to query (table does not exist)

Hey,
I have a form which has two blocks that are master and detail blocks. On the form, there are 3 fields that allow the query. If there is record found in the master then it works fine. If nothing found, it shows "query causes no records" which is also fine. But afterwards, no matter what I type in to query, it always show frm-40505. Oracle error, unable to perform query. I click "display error", it shows:
SELECT ROWID,LOC,INV_NUMBER,RECNO,FACTOR,C_DESC,ADJ_TYPE,CODE,AMT FROM OE_INVOICE_ADJ
WHERE (LOC=:1) and (INV_NUMBER=:2) order by recno
frm - 09402:Table or view does not exist.
Here oe_invoice_adj is the detail table and it does exist. If I stop the form and run it again then it's fine. It only happens after "query causes no records".
Any ideas? thanks a lot in advance.

Jay, Have you created public synonym for the tables so that the users don't have to refer the tables with the schema scott.xtable...
and have the users been given the SELECT privilege to those tables....
mb
I actually created the tables and views for my application by logging in as scott/tiger.Now the users I have created with due privileges are just able to log in but unable to perform any query or DML.The error message is FRM 40505'UNABLE TO PERFORM QUERY' which says table or view does not exist.How do I fix this problem?
Please get me a solution
Thanks
Jay

ORA-12060: shape of prebuilt table does not match definition query

Oracle version: 11G Release 2
When Iam trying to create a Materialized view with on prebuilt table syntax I am facing the below issue.
Create table sample_table as select col1,col2,col3 from sample_view;
table created.
Create Materialized view sample_table on prebuilt table refresh complete on demand as
select col1,col2,col3 from sample_view;
I am getting the below exception
Error report:
SQL Error: ORA-12060: shape of prebuilt table does not match definition query
12060. 00000 - "shape of prebuilt table does not match definition query"
*Cause: The number of columns or the type or the length semantics of a
column in the prebuilt table did not match the materialized
view definition query.
*Action: Reissue the SQL command using BUILD IMMEDIATE, BUILD DEFERRED, or
ensure that the prebuilt table matches the materialized view
definition query.
How to resolve this issue?

SQL> create table sample_table as
2 select owner, table_name, tablespace_name
3 from dba_tables
4 where rownum < 11;
Table created.
SQL> Create Materialized view sample_table on prebuilt table refresh complete on demand as
2 select owner, table_name, tablespace_name
3 from dba_tables;
Materialized view created.What issue?
Which leads me to ask what version of Oracle you have because we don't know.
SELECT *
FROM v$version;

The new version of firefox does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs

'table does not exist' when creating generic datasource

I went to SBIW->Business Content DataSources->Transfer Business Content DataSources-chose "content delta". it said 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings.
then I selected each datasource under co-om-cca and activated those with no problems.
problem: now when i try to create came generic datasource using co-om-cca application component i get mssg when saving 'the specified table does not exist'...so now it isn't even letting me create a datasource at all using a standard application component either.
I have been having many problems with creating datasources and using application components and this is why I did the first paragraph because I don't know what else to try.
Please help, thanks.

I have answered my own question. I wasn't entering the view/table and it was my own complete oversight.

There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

# Question
there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
..

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Row action event on data table does not occur when rows added dynamically

Row action event on data table does not occur (only refreshes the page) when the rows in the data table are added dynamically at run time using button click and java bean.
please tell me a way to catch the row click event when adding rows dynamically to data table. i m using RAD 6.0 to develop Faces jsp pages.
thanks
amit

i got the answer

JTable Problem (table does not show rows and columns)

Hi All,
What the table is suppose to do.
- Load information from a database
- put all the values in the first column
- in the second column put combobox (cell editor with numbers 1-12)
- the 3rd column put another combobox for something else
- the 4th column uses checkbox as an edit
The number of rows of the table should be equal to the number of
record from
the database. If not given it default to 20 (poor but ok for this)
The number of columns is 4.
But the table does not show any rows or
column when I put it inside a
JScrollPane (Otherwise it works).
Please help,
thanks in advance.
public class SubjectTable extends JTable {
* Comment for <code>serialVersionUID</code>
private static final long serialVersionUID = 1L;
/** combo for the list of classes */
protected JComboBox classCombo;
/** combo for the list of subjects */
protected JComboBox subjectsCombo;
/** combo for the list of grade */
protected JComboBox gradeCombo;
boolean canResize = false;
boolean canReorder = false;
boolean canSelectRow = false;
boolean canSelectCell = true;
boolean canSelectColumn = true;
// the row height of the table
int rowHeight = 22;
// the height of the table
int height = 200;
// the width of the table
int width = 300;
// the size of the table
Dimension size;
* Parameterless constructor. Class the one of the other constructors
to
* create a table with the a new <code>SubjectTableModel</code>.
public SubjectTable() {
this(new SubjectTableModel());
* Copy constructor to create the table with the given
* <code>SubjectTableModel</code>
* @param tableModel -
* the <code>SubjectTableModel</code> with which to
initialise
* the table.
SubjectTable(SubjectTableModel tableModel) {
setModel(tableModel);
setupTable();
* Function to setup the table's functionality
private void setupTable() {
clear();
// set the row hieght
this.setRowHeight(this.rowHeight);
// set the font size to 12
//TODO this.setFont(Settings.getDefaultFont());
// disble reordering of columns
this.getTableHeader().setReorderingAllowed(this.canReorder);
// disble resing of columns
this.getTableHeader().setResizingAllowed(this.canResize);
// enable the horizontal scrollbar
this.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// disable row selection
setRowSelectionAllowed(this.canSelectRow);
// disable column selection
setColumnSelectionAllowed(this.canSelectColumn);
// enable cell selection
setCellSelectionEnabled(this.canSelectCell);
setPreferredScrollableViewportSize(getSize());
TableColumn columns = null;
int cols = getColumnCount();
for (int col = 0; col < cols; col++) {
columns = getColumnModel().getColumn(col);
switch (col) {
case 0:// subject name column
columns.setPreferredWidth(130);
break;
case 1:// grade column
columns.setPreferredWidth(60);
break;
case 2:// class room column
columns.setPreferredWidth(120);
break;
case 3:// select column
columns.setPreferredWidth(65);
break;
} // end switch
}// end for
// set up the cell editors
doGradeColumn();
doClassColumn();
//doSubjectColumn();
* Function to clear the table selection. This selection is different
to
* <code>javax.swing.JTable#clearSelection()</code>. It clears the
user
* input
public void clear() {
for (int row = 0; row < getRowCount(); row++) {
for (int col = 0; col < getColumnCount(); col++) {
if (getColumnName(getColumnCount() - 1).equals("Select")) {
setValueAt(new Boolean(false), row, getColumnCount() - 1);
}// if
}// for col
}// for row
* Function to set the cell renderer for the subjects column. It uses
a
* combobox as a cell editor in the teacher's subjects table.
public void doSubjectColumn() {
TableColumn nameColumn = getColumnModel().getColumn(0);
nameColumn.setCellEditor(new DefaultCellEditor(getSubjectsCombo()));
// set up the celll renderer
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for drop down list");
nameColumn.setCellRenderer(renderer);
// Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = nameColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer) headerRenderer)
.setToolTipText("Click the Name to see a list of choices");
}// end doSubjectsColumn----------------------------------------------
/** Function to set up the grade combo box. */
public void doGradeColumn() {
TableColumn gradeColumn = getColumnModel().getColumn(1);
gradeColumn.setCellEditor(new DefaultCellEditor(getGradeCombo()));
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for drop down list");
gradeColumn.setCellRenderer(renderer);
// Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = gradeColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer) headerRenderer)
.setToolTipText("Click the Grade to see a list of choices");
}// end doGradeColumn-------------------------------------------------
* Function to setup the Class room Column of the subjects
public void doClassColumn() {
// set the column for the classroom
TableColumn classColumn = getColumnModel().getColumn(2);
classColumn.setCellEditor(new DefaultCellEditor(getClassCombo()));
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for drop down list");
classColumn.setCellRenderer(renderer);
// Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = classColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer) headerRenderer)
.setToolTipText("Click the Class to see a list of choices");
}// end doClassColumn--------------------------------------------------
* Function to get the size of the table
* @return Returns the size.
public Dimension getSize() {
if (this.size == null) {
this.size = new Dimension(this.height, this.width);
return this.size;
* Function to set the size of the table
* @param dim
* The size to set.
public void setSize(Dimension dim) {
if (dim != null) {
this.size = dim;
return;
* Function to create/setup the class room comboBox. If the comboBox
is
* <code>null</code> a nwew one is created else the functon returns
the
* function that was returned initially.
* @return Returns the classCombo.
private JComboBox getClassCombo() {
if (this.classCombo == null) {
this.classCombo = new JComboBox();
// fill up the class name combo
ArrayList classRooms = new ArrayList();
try {
//TODO classRooms = Settings.getDatabase().getClassRooms();
for (int i = 0; i < 10; i++) {
String string = new String("Class");
string += i;
if (!classRooms.isEmpty()) {
classRooms.trimToSize();
for (int i = 0; i < classRooms.size(); i++) {
this.classCombo.addItem(classRooms.get(i));
} catch (Exception e) {
e.printStackTrace();
return this.classCombo;
* Function to create/setup the subjects comboBox. If the comboBox is
* <code>null</code> a nwew one is created else the functon returns
the
* function that was returned initially.
* @return Returns the subjectsCombo.
private JComboBox getSubjectsCombo() {
if (this.subjectsCombo == null) {
this.subjectsCombo = new JComboBox();
try {
ArrayList subjects = loadSubjectsFromDatabase();
if (!subjects.isEmpty()) {
Iterator iterator = subjects.iterator();
while (iterator.hasNext()) {
// create a new subject instance
//TODO Subject subct = new Subject();
// typecast to subject
//TODO subct = (Subject) iterator.next();
String name = (String) iterator.next();
// add this subject to the comboBox
//TODO this.subjectsCombo.addItem(subct.getName());
subjectsCombo.addItem(name);
}// end while
}// end if
else {
JOptionPane.showMessageDialog(SubjectTable.this,
"Subjects List Could Not Be Filled");
System.out.println("Subjects List Could Not Be Filled");
} catch (Exception e) {
e.printStackTrace();
return this.subjectsCombo;
* Function to load subjects from the <code>Database</code>
* @return Returns the subjects.
private ArrayList loadSubjectsFromDatabase() {
// list of all the subject that the school does
ArrayList subjects = new ArrayList();
try {
//TODO to be removed later on
for (int i = 0; i < 10; i++) {
String string = new String("Subject");
string += i;
subjects.add(i, string);
// set the school subjects
//TODO subjects = Settings.getDatabase().loadAllSubjects();
} catch (Exception e1) {
e1.printStackTrace();
return subjects;
* Function to create/setup the grade comboBox. If the comboBox is
* <code>null</code> a nwew one is created else the functon returns
the
* function that was returned initially.
* @return Returns the gradeCombo.
private JComboBox getGradeCombo() {
if (this.gradeCombo == null) {
this.gradeCombo = new JComboBox();
// fill with grade 1 to 12
for (int i = 12; i > 0; i--) {
this.gradeCombo.addItem(new Integer(i).toString());
return this.gradeCombo;
public static void main(String[] args) {
try {
UIManager.setLookAndFeel(new Plastic3DLookAndFeel());
System.out.println("Look and Feel has been set");
} catch (UnsupportedLookAndFeelException e) {
// TODO Auto-generated catch block
e.printStackTrace();
SubjectTableModel model = new SubjectTableModel();
int cols = model.getColumnCount();
int rows = model.getRowCount();
Object[][] subjects = new Object[rows][cols];
for (int row = 0; row < rows; row++) {
subjects[row][0] = new String("Subjectv ") + row;
}//for
model.setSubjectsList(subjects);
SubjectTable ttest = new SubjectTable(model);
JFrame frame = new JFrame("::Table Example");
JScrollPane scrollPane = new JScrollPane();
scrollPane.setViewportView(ttest);
frame.getContentPane().add(scrollPane);
frame.pack();
frame.setVisible(true);
**************************************END
TABLE******************************
----------------------------THE TABLE
MODEL----------------------------------
* Created on 2005/03/21
* SubjectTableModel
package com.school.academic.ui;
import javax.swing.table.AbstractTableModel;
* Class extending the <code>AbstractTableModel</code> for use in
creating the
* <code>Subject</code>s table. In addition to the implemented methods
of
* <code>AbstractTableModel</code> The class creates a model that has
initial
* values - the values have their own <code>getter</code> and
* <code>setter</code> methods - but can still be used for values that
a user
* chooses.
* <p>
* @author Khusta
public class SubjectTableModel extends AbstractTableModel {
* Comment for <code>serialVersionUID</code>
private static final long serialVersionUID = 3257850978324461113L;
/** Column names for the subjects table */
String[] columnNames = { "Subject", "Grade", "Class Room",
"Select" };
/** Array of objects for the subjects table */
Object[][] subjectsList;
private int totalRows = 20;
protected int notEditable = 0;
* Parameterless constructor.
public SubjectTableModel() {
// TODO initialise the list
// add column to the default table model
this.subjectsList = new
Object[getTotalRows()][getColumnNames().length];
* Copy constructor with the <code>subjectList</code> to set
* @param subjects
public SubjectTableModel(Object[][] subjects) {
this(0, null, subjects, 0);
* Copy constructor with the initial number of row for the model
* @param rows -
* the initial rows of the model
* @param cols -
* the initial columns of the model
* @param subjects -
* the initial subjects for the model
* @param edit - the minimum number of columns that must be
uneditable
public SubjectTableModel(int rows, String[] cols, Object[][]
subjects, int edit) {
// set the initial rows
setTotalRows(rows);
// set the column names
setColumnNames(cols);
// set the subjectlist
setSubjectsList(subjects);
//set not editable index
setNotEditable(edit);
* Function to get the total number of columns in the table
* @return int -- the columns in the table
public int getColumnCount() {
if (this.subjectsList == null) {
return 0;
return getColumnNames().length;
* Function to get the total number of rows in the table
* @return int -- the rows in the table
public int getRowCount() {
if (this.subjectsList == null) {
return 0;
return this.subjectsList.length;
* Function to get the name of a column in the table.
* @param col --
* the column to be named
* @return String -- the column in the table
public String getColumnName(int col) {
if (getColumnNames()[col] != null) {
return getColumnNames()[col];
return new String("...");
* Function to get the value of the given row.
* @param row --
* the row of the object.
* @param col --
* the col of the object.
* @return Object -- the value at row, col.
public Object getValueAt(int row, int col) {
return getSubjectsList()[row][col];
* Function to return the data type of the given column.
* @param c --
* the column whose type must be determined.
* @return Class -- the type of the object in this col.
public Class getColumnClass(int c) {
if (getValueAt(0, c) != null) {
return getValueAt(0, c).getClass();
return new String().getClass();
* Function to put a value into a table cell.
* @param value --
* the object that will be put.
* @param row --
* the row that the object will be put.
* @param col --
* the col that the object will be put.
public void setValueAt(Object value, int row, int col) {
* TODO: Have a boolean value to determine whether to clear or
to set.
* if true clear else set.
if (value != null) {
if (getSubjectsList()[0][col] instanceof Integer
&& !(value instanceof Integer)) {
try {
getSubjectsList()[row][col] = new
Integer(value.toString());
fireTableCellUpdated(row, col);
} catch (NumberFormatException e) {
* JOptionPane .showMessageDialog( this., "The \""
+
* getColumnName(col) + "\" column accepts only
values
* between 1 - 12");
return;
System.out.println("Value = " + value.toString());
System.out.println("Column = " + col + " Row = " + row);
// column = Grade or column = Select
switch (col) {
case 2:
try {
// TODO
if (Boolean.getBoolean(value.toString()) == false
&& getValueAt(row, 0) != null
&& getValueAt(row, 1) != null
&& getValueAt(row, 2) != null) {
// subjectsList[row][col + 1] = new
Boolean(true);
System.out.println("2. false - Updated...");
* this.subjectListModel.add(row,
* this.subjectsList[row][0] + new String(" -
") +
* this.subjectsList[row][2]);
} catch (ArrayIndexOutOfBoundsException exception) {
exception.printStackTrace();
break;
case 3:
if (Boolean.getBoolean(value.toString()) == false
&& getValueAt(row, 0) != null
&& getValueAt(row, 1) != null
&& getValueAt(row, 2) != null) {
System.out.println("3. If - Added...");
getSubjectsList()[row][3] = new Boolean(true);
this.subjectListModel.addElement(this.subjectsList[row][0] +
* new String(" - ") + this.subjectsList[row][2]);
// subjectListModel.remove(row);
fireTableCellUpdated(row, col);
fireTableDataChanged();
// this.doDeleteSubject();
} else if (Boolean.getBoolean(value.toString()) ==
true
&& getValueAt(row, 0) != null
&& getValueAt(row, 1) != null
&& getValueAt(row, 2) != null) {
setValueAt("", row, col - 1);
setValueAt("", row, col - 2);
setValueAt("", row, col - 3);
System.out.println("3. Else - Cleared...");
// this.subjectListModel.remove(row);
break;
default:
break;
}// end switch
getSubjectsList()[row][col] = value;
fireTableCellUpdated(row, col);
fireTableDataChanged();
}// end if
}// end
* Function to enable edition for all the columns in the table
* @param row --
* the row that must be enabled.
* @param col --
* the col that must be enabled.
* @return boolean -- indicate whether this cell is editble or
not.
public boolean isCellEditable(int row, int col) {
if (row >= 0
&& (col >= 0 && col <= getNotEditable())) {
return false;
return true;
* Function to get the column names for the model
* @return Returns the columnNames.
public String[] getColumnNames() {
return this.columnNames;
* Function to set the column names for the model
* @param cols
* The columnNames to set.
public void setColumnNames(String[] cols) {
// if the column names are null the default columns are used
if (cols != null) {
this.columnNames = cols;
* Function to get the rows of subjects for the model
* @return Returns the subjectsList.
public Object[][] getSubjectsList() {
if (this.subjectsList == null) {
this.subjectsList = new
Object[getTotalRows()][getColumnNames().length];
return this.subjectsList;
* Function to set the subjects list for the model
* @param subjects
* The subjectsList to set.
public void setSubjectsList(Object[][] subjects) {
// if the subject list is null create a new one
// using default values
if (subjects == null) {
this.subjectsList = new
Object[getTotalRows()][getColumnNames().length];
return;
this.subjectsList = subjects;
* Function to get the total number of rows for the model. <b>NB:
</b> This
* is different to <code>
getRowCount()</code>.<code>totalRows</code>
* is the initial amount of rows that the model must have before
data can be
* added.
* @return Returns the totalRows.
* @see #setTotalRows(int)
public int getTotalRows() {
return this.totalRows;
* Function to set the total rows for the model.
* @param rows
* The totalRows to set.
* @see #getTotalRows()
public void setTotalRows(int rows) {
// if the rows are less than 0 the defaultRows are used
// set getTotalRows
if (rows > 0) {
this.totalRows = rows;
* Function to get the number of columns that is not editble
* @return Returns the notEditable.
public int getNotEditable() {
return this.notEditable;
* Function to set the number of columns that is not editable
* @param notEdit The notEditable to set.
public void setNotEditable(int notEdit) {
if (notEdit < 0) {
notEdit = 0;
this.notEditable = notEdit;
----------------------------END TABLE MODEL----------------------------------

I hope you don't expect us to read hundreds of lines of unformatted code? Use the "formatting tags" when you post.
Why are you creating your own TableModel? It looks to me like the DefaultTableModel will store you data. Learn how to use JTable with its DefaultTableModel first. Then if you determine that DefaultTableModel doesn't provide the required functionality you can write your own model.

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

Table does not exist - DbLink

Hello, I have 2 instances, into production environment, instance A and instance B. Into instance A I have a dblink to instance B...
The problem appear when I want to see the indexes of a table of instance B from instance A, to do this I press F4 into TOAD over:
owner.table@dblink
and when I click into tab "Indexes", Oracle said me: "The table does not exist", I review the grants, and this is ok, and the table exist in instance B.
One explanation, I have the same environment into testing, and there work perfectly, I have the same dblinks, the same users and the same grants.
Any suggestion to help me.

You may want to contact the folks that make TOAD.
My guess is that TOAD is querying the local USER_/ ALL_/ DBA_INDEXES table rather than the USER_/ ALL/ DBA_INDEXES table at the remote server. You could run a client-side SQL trace to see what SQL is being generated to see if the problem is that TOAD is generating the incorrect SQL or whether there is some problem with the database. But I'm not sure how productive that would be since it's not like you could fix the SQL TOAD is submitting. If there is an option in TOAD that changes the behavior here, it's certainly possible that someone here will know it. But TOAD support is probably more likely.
Justin

Table does not exist for the sys user

Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
Sarang

Yeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

EXP-00011 table does not exist

Hi guru's,
My DB Version: 10.2.0.2.0
OS Version: Solaris 10
While trying to export a table from a schema i am getting error:
exp-00011 table does not exist
when i check the source database i found that table name as 'abc' exists there
but when i log on to schema and try to check the info about the abc table with below mentioned query i got below error:
SQL> select table_name from user_tables where table_name='rtx';
no rows selected
i also checked with table_name='RTX'
i am getting the same error.
Can anyone help me out

sorry the table name is rtx
C:\Documents and Settings\Administrator>exp userid=sysadm/rtxprod@rtxprod tables=sysadm.rtx file='E:\rtx.dmp' buffer=1000000 feedback=10000 statistics=none
Export: Release 10.2.0.1.0 - Production on Thu May 10 14:36:34 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options^C
C:\Documents and Settings\Administrator>exp userid=sysadm/rtxprod@rtxprod tables=sysadm.rtx file='E:\rtx.dmp' buffer=1000000 feedback=10000 statistics=none
Export: Release 10.2.0.1.0 - Production on Thu May 10 14:37:05 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
EXP-00011: SYSADM.RTX does not exist
Export terminated successfully with warnings.

DB Toolbox List tables - does not work properly

Hello All
I have two databases: one "c:\a\aa.mdb" contains some tables inside
second "c:\a\bb.mdb" contains no table.
When I run the list tables command from DB toolbox SEPARATELLY the tables are listed in proper way, i.e. one has tables, second does not.
But when I build a vi which returns the table list, and call it twice the result is wrong. Both database seems to have all tables, even though the second does not contain any tables.
I attachment you will find the packed example.
Two databases with udl files (change if unpacked to different directory than c:\a\).
The vi "two vi tables.vi" shows the problem. It calls "find tables.vi" to return the tables in database.
You can see th
at when DB List tables is called in the main vi it works fine. But when it is called two times inside the loop it returns false results.
Can anybody comment on this.
For those who are afraid of unpacking zip files I enclose pictures.
thank you in advance
Pawel
Attachments:
list_tables.zip ‏36 KB
diagram.gif ‏22 KB
front_pannel.gif ‏37 KB

Pawel,
I apologize for the delayed response to your first question. I am currently working on the problem in order to determine a more permanent solution. These forums are a very important resource for not only helping our customers but also for improving our products!
With regards to your other question I believe the problem is one of data flow programming. Each table creation will take a certain amount of time to complete depending on the size and nature of the rows and columns being inserted. Unless you programmatically control the data flow, the �DB Tools Execute Query.vi� does not necessarily know when each table has been created. Since control is handed off to the database program, the �DB Tools Create Table vi� is forced to wait
until the database program returns control.
To programmatically control the flow of data you would need to use either a case structure with a while loop (suggested) or a sequence structure. These structures are critical in cases where execution of a previous section of code must be completed before subsequent code portions are to execute. I have attached an exaple that may prove useful.
The wait method is actually a good way to time data flow but in this case may not be the best solution if you want your table creations to be dynamic over time (you may be forced to change the wait for larger table creations, for instance). If you know that your table creations will never change then using a wait method may be an acceptable solution.
I hope this information helps out some. If not please post back with some sample code or more detail on your issue. Good Luck!
Craig H.
National Instruments
Attachments:
Create_Table_Example.zip ‏26 KB

DDNTF and DDNTT tables does not exixts in dictionary.

Hi,
After upgrade,tables DDNTF and DDNTT does not exists in dictionary when executing tcode SE11 but I can see DDNTX tablein SE11.
Although when basis person executes some query,its readings reading table DDNTF after taking long time.
Plz help me why these tables are not visible through SE11 tcode.
Reply soon
Reagrds,
Divya

Hi Divya,
I think this not the right place where you post this thread to get abrupt and accurate answers..
You would rather post in SAP NETWEAVER ADMINISTRATOR or SAP on SQL SERVER Forums.
But any one by doing search i have found a thread which discussed regarding this..
Please check this thread and if possible post this thread in another forum.
Re: R3load Error during ABAP import phase for DB Instance Installation
Hope this would help you.
Good luck
Narin

Query Tables Does Not Fill Down Formulas When Refreshed

Similar Messages

Maybe you are looking for