Query with different currency for different users

Hi at all,
just a crazy thing happened. I created a query. Every user gets the result with the currency EURO.
Only one user here gets the country currency like US$, Francs etc.
If he logs in on a different PC, he also gets EURO.
So I think the problem is because of his PC.
I already checked his user data in SAP and BW.
And he really uses the same query with the same filters...
Thanks for helping...
Kind regards from totally confused Marielle

Hi,
Check the Front end Patch levels on both the machines. If they are different, then you can decide what you want to do, either upgrade it on other PCs or not use the one that has it.
Cheers,
Kedar

Similar Messages

DIFFERENT Currencies for PO Line Item

Hi Frndz,
On a Purchase Order with more than one line item, the different items can have prices with DIFFERENT currencies?
In my case first line item currency is getting copied to all line item and after that, currency feild is grayed out. But client want me to configure different currencies for different line item if possible.
Thanks,
Hetal

Hi
Currency filed is depending on Vendor master.
In Vendor master u'll define the currency.
IN ME21N, if u enter the vendor it will automatically default.
Check it out.
Regards,
Raman

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

F110 Payment with different currencies for a vendor

We want to run a payment in transaction F110, where we have different currencies for the same vendor.
An example: We have a debit invoice on 100 € and a credit memo on 50 SEK.
When the payment is run, the currencies are not summarized into one record but two separate. One for each currency. We would like to have it in one record. Is this possible?

Hi
you can adjust the payment currency for one of them to be in same currency as the another one and you will see at F110 that the program read both document in same currency
Regards
Mahmoud EL Nady

How can you define a different homepage for a user?

Hi
I am fairly new to Application express, I have created an application but I would like to define a different homepage for a user when they login. Of course I can modifiy the PLSQL code:
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':1'
With a different page, however I would like to setup a different home page depending on the user that logs in - I tried setting up a conditional process specifying P_101_USERNAME but this did not work...any ideas on how this can be achieved?

Hi
Thank you for your response, I have created the function:
create or replace function "GETDEFPAGE"
(auser in VARCHAR2)
return VARCHAR2
is
Defpage number;
begin
select DefaultPageNumber into Defpage from users_table where username='aUser';
return Defpage;
end;
Can you please assist me on how I can call the function in the login process within the block:
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':1'
);

Different currencies for multiple line items in a AP invoice?

Hi, Expert,
Is it possible to assign different currencies for multiple line items in a AP invoice?
Eg:
One vendor is supplying raw materials from different regions, and we have to raise one invoice with different currency rate to each items
regards,
Sanju

Hi Sanju,
It is not possible to assign different currencies for multiple line items in a AP invoice.
Try to book the different documents(different correncies for a single vendor in a A/P Invoice).
Regards,
Madhan.

Show report in different currency depending on user parameter

hi all,
i'm trying to show my report in different currency, depending on users given parameter.
i hold my account balance in USD based. User should select one parameter, in which currency they want to see their account balance. (e.g. EURO, GBP ...) and depending on their selection, i want to convert USD based info into chosen currency, by fetching field from currency table and making some calculation.
also i want to include in report currency($, Â£ ...) accordingly ().
how can i achieve this, has somebody any suggestion to me?
thanks in advance.
bogi.

hi,
i think i need to explain my problem more detailed. anyone who has suggestion, please help me.
i have 3 tables account, times and currency.
- times table has time_key, date, day_of_week fields.
- account table has - account_balance and time_key_FK fields.
- currency table has currency_type, amount, time_key_FK fields.
1. i have function decode(:Currency,'USD',account_balance,'EURO',--here i want to replace my calculation CALC1---)
CALC1- this calculation need to some calculation like this: account_balance * (fetched field from this sql)(select amount from currency, account where currency.currency_type='EURO' and account.time_key_FK=currency.time_key_FK)
i tried to do this, but discoverer plus doesn't let me make condition and calc. i'm very confused.
2. after i achieve this query, somehow i want to display on worksheet on which currency is it based. can i get parameter value, and show this value as in column heading?
tnx!!!

Pure-ftpd - different permissions for virtual users?

I seem not to be able to find out how I could declare different permissions for different virtual users. In /etc/pure-ftpd.conf exists one line to declare permissions using
#umask file:folder
umask 133:133
umask matches the numbers to 'UserGroupOthers'.
Now that virtual ftp users belong to a real existing unix user / group, I wonder who is Users, Group and Others?
Users = virtual ftp user ?
Group = virtual ftp group ?
Others = anonymous visitors?
How can I tune it, so one virtual user can add files - f.e. to be used by a scan station - while others shall only read, having anonymous disabled?
This gives me a headache.

Ok, let me think. What did I do?
I had different users. User X, Y and Z.
Then, I had a shared directory above their home directories.
While in the system, (not in pure-ftpd) I symlinked.
(Note that doing something in user X's directory, like ln -s ../shared didn't work---I had to do ln -s /usr/home/ftpuser/shared).
Then, I ~think I played with the permissions on shared and got what I wanted.
Then, after a few hours on this, they changed their minds about what they wanted, everyone was allowed to use shared, but different companies had to have their own directories, so I no longer have that config.
For what it's worth, you can take a quick look at my page
http://www.scottro.net/qnd/qnd-pureftpd.html
but I don't think it covers that situation.
HTH, though I doubt that it did.

Are iPads built with different configurations for different countries?

Are iPads built with different configurations for different countries?

deebeeque wrote:
I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
Additionally, does Brazil have 4G?
I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

Leave Quota generation with diifferent rules for different countries

Hi,
I have the following requirement need help in achieving this.
Employers must grant 10 days paid leave to employees that worked for six consecutive months from the time of hiring and who worked on not less than 80 per cent of all schedule work days. This paid leave may be taken consecutively or separately. Where an employee's application to take paid leave will hinder the normal business operations, the employer may require the employee to take such paid leave at a different time.
The number of days of paid leave available to employees increases in proportion to employees' length of service as set forth in the below table.
Years of Service 0.5 1.5 2.5 3.5 4.5 5.5 6.5+
Paid Holidays 10 11 12 14 16 18 20
The right to annual paid leave expires after two years. In other words, annual paid leave left over from one year may be carried over and taken the next year only. For example, if an employee is awarded 10 days paid leave after their first 6 months of employment; those paid holidays will become invalid after 2.5 years of employment. Use them or lose them.
Simply put, holidays from one year can be carried over to the next year, but not to the third year. So, if you don't take your leave from one particular year within 12 months of that year ending, you will lose that first year's allowance.
Employee can take leave encashment of holiday leave only when leaving their employer. It is not legal for companies to buy up the holiday leave of those still working for the firm.
In my organization one PSG grouping has been used for all countries, it wont be possible to change the grouping now. In such a case how can we provide different rule for different country without customizing the Leave module.
Do we have to use any PCR for this, if yes which??
Regards,
Jailakshmi
Edited by: Jailakshmi on Aug 3, 2011 7:16 AM

Hi,
Use QUOMO Feature to give different entitilement to employees.
Leave entitlement as per seniority can be configured in base entitlement.
Keep validity and deduction period for 2 years by using :Relative postion" option in validity and deduction period table.
Rgds,
Lata
Rgds,

Purchasing info records with different prices for different packaging

Hi,
hope, someone can help me.
We have different prices for different kind of packaging, but all the material is bought in the same unit, i.e. kg.
Let's say, usually you buy x kg in a drum, but sometimes you buy y (or x) kg in a bottle or in a bag.
We won't allow variable order units. Even if we would, it's not helpful, because we always order kg.
So the price depends on a criterion - I don't know, which to take. And we want to maintain the different prices in the info records.
Is there a solution?

Hi.
I went through the history of the problem.It seems that your base unit of measure is KG.Also you have mentined that same material is used in various plants.
You need to activate the variable ordering unit 2 in material master. This is present in the materila master Purchasing tab.Also note that this data is maintained at plant level. This will not have any impact on the materials which are presnt in the other plants.
After activating variable order unit in materal master. You need maintains the conversion factors from Order units to Base UOM.(Eg 1 KG = 1 KG, 1BOX = 10 KG etc)
Create inforecord for the material and maintain price in Base unit of measure.
In PO enter the order unit as BOX system will automatically calculate the price of BOX based on the conversion factors which are maintained in the material master.
I belive this is the simple and best solution for your requirement..
If you have any suggestions please let me know
Cheers
Umakanth

GLOBAL TEMPORAY TABLE with the ability for a user to see others's entries

I have a list of record available for many user at the same time for them to work on.
Every one has the tendency to chosse the first record...
I want each of the users to be able to chose a different record once the preceding record has been selected by another user.
It would have been somthing like a GLOBAL TEMPORAY TABLE but with the ability for every user to see others records
so I would do and anti-join...
Does anyon have an idea on how I could implement such a behavior?

You will not be able to use a global temporary table for such a requirement.
It sounds like you will need a permanent table, which you will need to lock certain records (prohibiting users from taking those already in use), you can look at using the DBMS_LOCK package for this.
That's just speculation based on what you've typed, if you provide more details you make get more specific help.

Different aggregation for different Dimensions

Hello,
is it possible to have different aggregations on different dimensions.
I have following situation:
I have a measure per client and day.
I'm interested in the maximum per month from the daily sums over clients.
In the measure properties I can only choose between Maximum and Sum in general but not per Dimensions.
To clearify what i mean here is some sample data.
* * Client A * Client B *
* 2014-11-28 * 7 * 8 * SUM() = 15
* 2014-11-29 * 6 * 8 * SUM() = 14
* 2014-11-30 * 6 * 10 * SUM() = 16 <-- monthly max
* 2014-12-01 * 7 * 8 * SUM() = 15
* 2014-12-02 * 5 * 12 * SUM() = 17 <-- monthly max
* 2014-12-03 * 6 * 9 * SUM() = 15
This data is stored in my fact table with reference to date and client dimensions.
This example data would have to be reported as:
/* Report on measure
* * Measure *
* 2014-11 * 16 *
* 2014-12 * 16 *
* Report on measure per client
(max per client and month)
* * Client A * Client B *
* 2014-11 * 7 * 8 *
* 2014-12 * 7 * 12 *
Can this be achieved with SSAS? Didn't find any property for that on the measure.
Best Regards,
Thomas

Hi Thomas,
According to your description, you want to calculate different aggregation for different dimensions, right?
Based on your scenario, I tested it on AdventureWorks cube, the query below is for you reference.
with member [Customer].[Country].[USA & Canada] as
Aggregate( { [Customer].[Country].&[United States],
[Customer].[Country].&[Canada]
member [Measures].[MaxAmount]
as
max([Date].[Calendar].currentmember.children,[Measures].[Internet Sales Amount])
select {[Customer].[Country].&[United States],[Customer].[Country].&[Canada],[Customer].[Country].[USA & Canada]} on 0,
[Date].[Calendar].[Month].members on 1
from
[Adventure Works]
where [Measures].[MaxAmount]
Here is similar thread with yours, please see:
https://social.technet.microsoft.com/Forums/en-US/1bd493ef-f957-4fd5-916b-ee60639106c3/calculated-member-different-aggregations-on-different-dimensions?forum=sqlanalysisservices
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Different price for different batches

hai, is there any possibility of maintaining differenet prices for different batches.
say for example i put 10 pieces into 1 batch and like that maintain 10 batches.
for each batch i want to maintain different prices.
is it possible.
Thanks in advance

The link mentioned talks about production / proportion units which deals with different conversions for different batches. For example in leather industry, basic unit may be piece but sales unit may be sq feet. And each piece has different area so proportion unit may be used.
But as i understand your requirement is just to have different prices for different batches but the units, conversions will remain the same for all batches.
Maintaining a batch specific price is a standard feature of SD pricing; create an access sequence with field batch (CHARG).
However one potential danger with this is when the user changes the batch, price will not be updated automatically (unlike when you update plant). To redetermine price automatically whenever batch is changed, you can use the exit below.
Include: MV45AFZB
Form: USEREXIT_NEW_PRICING_VBAP CHANGING NEW_PRICING.
Code:
if VBAP-CHARG ne *VBAP-CHARG
new_pricing = 'C'.
endif

Different LOV for different rows

Hi,
Imagine a tabular report with a number of rows, and a select list for each row populated based on data in that row.
I've seen a solution for this in a few threads, but I've tried to replicate it in 4.2.1.00.08 with no success
Select list filter in a tabular form problem
Tabular form - Different LOV for different rows
my query includes this as a column
APEX_UTIL.SAVEKEY_NUM(duration) durationwith another column defined as "Select List (query based on LOV)" using
select apex_util.keyval_num d, apex_util.keyval_num r from dualand while the duration varies, the LOV is always stagnant.
This occurs in both classic & updateable reports (tabular forms).
I was skeptical that it would work anyway, since I'm sure the query is resolved/bound before rendering each LOV - but that's just assuming background process logic.
Is the only alternative solutions to use APEX_ITEM.SELECT_LIST_FROM_QUERY() ?
Scott

Ahh, I had only tried that on my classic report example. It only seems to have that effect on the tabular form.
Makes me hesitant to use it with that kind of behaviour.
When comparing normal tabular form, one set to generic, and another changed back - I saw no differences in the metadata that I would think have some form of impact on rendering behaviour
APEX_APPLICATION_PAGE_RPT
APEX_APPLICATION_PAGE_REGIONS -- customization/timeout_cache_after changed, component_signature had trailing 0
APEX_APPLICATION_PAGE_RPT_COLS -- lost tabular form attributes, region had lost selector column, in fact I'm having trouble bringing it back to a point where it actually saves data.
Scott

Query with different currency for different users

Similar Messages

Maybe you are looking for