Question about configurations in Old Server

Dear All,,
I have a Question !
How will you find what are the configuration are in a server.. for example..
Is the DB configured RAC or DATA guard ?
Is RMAN configured or not ?
because at any time we have to face this request for Client who they don't have details regarding their Server,, (in Old Support Projects).
if i have a plan for a upgradation of database what are the documents i have to prepare and what are the steps i have to take at initial stage !
Regards
HAMEED

Hameed,
This should be documented and those documents should be provided by the clients.
You could do some investigation but again this will not be correct or complete without the documentation. For example, for RAC you could query the dynamic views (gv$instance, v$instance on each node) but this assume you already know what servers are configured. Or, you could refer to the RAC/DataGuard/RMAN configuration MOS docs for Oracle E-Business Suite and go through the steps to verify if those configurations are presented or not.
Thanks,
Hussein

Similar Messages

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Questions about mac mini iTunes server, streaming to macbook pro, ipads, etc.

I'm thinking about getting a mac mini to work with my NAS as a iTunes server. I have a bunch of questions about this. I will have two iPhones, a few iPads, and a laptop that will be accessing the files. I have iTunes match. This is basically to keep an always on computer for hosting the music/movies. My questions are as follows . . .
#1 Are there any good, comprehensive guides to show you how to do this?
#2 Can the movies be accessed when not at home on the shared network?
#3 Can the iPads or the macbook pro download the shared movies to be stored locally?
#4 Back to #3, how will it work on my macbook pro with listening to music (I have iTunes match)? Say i go to library and I break out my macbook pro and I don't have internet. What happens if I download music while at home onto my macbook pro to listen to it when I go to the library? Will i start a new library on my macbook pro? How will that mesh with the home server when I come back.
#5 Is there a way to mirror files or folders? So something that I have on my macbook pro will also mirror on the home server.
Thanks for your help on this. I'll post any follow up questions.

seanfenton wrote:
1. I want to replace the Optical drive with a 2TB SATA. can I use this 2.5 inch?
I do not know if it is the same model number, but this one will work in your MBP:
http://eshop.macsales.com/item/SEAGATE%20OWC/ST2000LM003M/
2. I want to replace the HD with a 128GB SSD 840. When I replace these drives, will my OS still be in tact? I have never done this job before.
No. You will have to format the drives in Disk Utility>Erase to Mac OS Extended (Journaled) and then install the OSX by using the original install disks.
3.) I want to replace the ram sticks to max capacity. This is 2 2GB sticks, Correct?
No. An early 17" 2008 MBP will accept 6GB RAM with the following specifications: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. The best sources of Mac compatible RAM are OWC and Crucial.
4.) Most difficult...
I want to extend the monitor wirelessly to a projector. I thought about using Apple TV and Airplay. However, support for airplay is for MacBooks 2011 and newer. I thought of using a PS3 and the media server, but I think this brings on a format compatibility issue. (my library is so large I could not afford to convert all my movies to MP4.) So, how would you recommend I put my extended monitor with VLC player onto a projector?
Could I possibly connect the MBP to a Mac Mini as an extension? would this work natively? I would rather use a VGA cord than F with 3rd party app BS.
Cannot help you there.
5..) I want to Bypass iTunes this time around. I would prefer to use Finder and VLC to manage all of my music. I mostly play all my music on shuffle, so, could I create a playlist on VLC with all of my music and play it randomly? (im sure this is possible but i'd like to organize all my plans with confirmation.)
You are not obligated to use iTunes.
6.) Can i upgrade the keyboard to backlit? i've read that this is possible.
All MBPs have back lighted keyboards. Your either needs a NVRAM reset or a repair.
Ciao.

I have a question about Configuration of Post with Clearing

I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.

Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks

Question about RAC 10g on server running AIX and domain name changes

We have several 10g clusters running on IBM p-Series AIX servers, and our company is changing the domain name for our network. I am concerned that if we do not change the domain names in the TNSNAMES.ora file and also the /etc/hosts file on each server, the cluster will no longer function. We are using CRS (version 10.2.0.3) and ASM within each cluster.
Does anyone know where I can find information about changing the domain name that was set up as part of the CRS and database installs for RAC? Does anyone have experience doing this, and would be willing to share a few insights? Thanks in advance for any advice you can give!

You may be able to use the VIPCA utility for RAC to change or modify the public and private settings for your domain names on AIX. Also, the Oracle 10g DBCA "Database Configuration Assistant" should be of use to change your settings for your RAC environment.
Also, see here for a good IBM Redbook that covers Oracle 10g RAC on AIX platforms:
http://www.redbooks.ibm.com/redbooks/pdfs/sg247541.pdf
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/

Question about Sun Java Calendar Server 7

You downloadable forum, at [http://www.sun.com/software/products/calendar_srvr/get_it.jsp|http://www.sun.com/software/products/calendar_srvr/get_it.jsp],
leaves one with two questions.
-What databases are needed/supported by this MessageBoard System for backend storage?
-What are the licensing details? May the MessageBoard/Communications Suite 7
be installed and used in a commercial environment, free?
-May Sun Java Calendar Server 7 be downloaded without the Communications suite?
-Can it be run off an Apache Tomcat Server with J2SE,J2EE codebases?

Although... at the top of this forum it says
This is a forum for new Java developers to get acquainted with the technologies and tools associated with the Java Platform.It doesn't actually say anything about programming, not there nor in what follows. So it isn't surprising that the OP thought this was a suitable forum to ask about that server, which looks as if it might be a "tool associated with the Java platform".

Question about 3750 as dhcp server

hi,
With two c3750 switches stacked one customer is plannig to configure those switches to act as dhcp server for about three thousand clients.
Can this configuration affect to the normal behaviour of the stack?
Could come up some problems with this amount of clients?
Thanks in advance

uosambela wrote:hi,With two c3750 switches stacked one customer is plannig to configure those switches to act as dhcp server for about three thousand clients.Can this configuration affect to the normal behaviour of the stack?Could come up some problems with this amount of clients?Thanks in advance
Personally with that many clients i would look to use something like Microsoft Windows DHCP server. Using switches/routers as DHCP servers is fine for a few vlans or clients but for 3000 it is much easier to manage with a dedicated server.
Jon

Questions about configuring sshd

I checked the server admin manual and didn't find much detail on this topic. I took a look at the man page for sshd, but didn't really understand everything I read. Hoping someone here can help me understand how to configure sshd in OSX. I'm pretty new to OSX, but I have some experience working with Linux hosts. Working with sshd seems a little different on OSX.
I need to adjust the system wide setting to timeout inactive SSH sessions. Currently a stale session will hang open for ever. I need to set the timeout to 15 minutes. Where/How is this done? Is this done in /etc/ssh_config by setting a value for "ConnectTimeout?" Is this seconds or minutes?
How do you restart sshd after making changes to the config?
What is the difference between /etc/ssh_config and /etc/sshd_config?

First off, there are two config files of interest here:
/etc/ssh_config - configuration file for the ssh client
/etc/sshd_config - configuration file for the ssh server
If you make a change to sshd_config then the change will apply to all connections made to this server. Making changes to ssh_config affect outgoing connections initiated by this machine.
So the first question is which file to edit.
If you want to control this at the server side (so idle connections are terminated by the server) then edit /etc/sshd_config.
All the options are covered in the sshd_config man page:
# man sshd_config
Specifically, I think you're looking for a combination of ClientAliveInterval and ClientAliveCountMax.
ClientAliveInterval sets how frequently SSHD checks the client connection. If ClientAliveCountMax tests are performed without any response the connection is closed.
So, for your 15 minute disconnect you could set the ClientAliveInterval to 300 (5 minutes = 300 seconds), with a ClientAliveCountMax set to 3 (you don't want to set it to 15 minutes/1 Max since any temporary network delay could cause the connection to drop).
To control this from the client side, the corresponding parameters to add to /etc/ssh_config are ServerAliveInterval and ServerAliveCountMax.
How do you restart sshd after making changes to the config?
Changes are dynamic, and applied to each new connection (i.e. the next time you log in it will use the current sshconfig/sshdconfig settings).

Question about writing a web server

I was asked to write a simple Web server that responds to HTTP requests received on port 808
It has the following features:
1.a request for an HTML document or image file should generate a response with the appropriate MIME type
2.a request for a directory name with a trailing / should return the contents of the index.html file in that directory (if it exists) or else a suitably formatted HTML listing of the directory contents, including information about each file
3.a request for a directory name without a trailing / should generate an appropriate Redirect response
4.a request for a non-existent file or directory should generate an appropriate error response
5/the Web server should be multi-threaded so that it can cope with multiple
how to do it?
may anyone help me please?

As a startert for ten, try this that I had lying around form a previous
forum response.
java -cp <whatever> Httpd 808
and connect to http://localhost:808 to get an eye-full.
If you should use this for anything approacing a commercial
purpose, I will, of course, expect sizable sums of money to be
deposited in my Swiss bank account on a regular basis.
Darn it! I'm serious!
import java.io.*;
import java.net.*;
import java.util.*;
public class Httpd
     implements Runnable
     private static String HTTP_400=
          "<HTML><BODY><H2>400 Bad Request</H2></BODY></HTML>";
     private static String HTTP_403=
          "<HTML><BODY><H2>403 Forbidden</H2></BODY></HEAD>";
     private static String HTTP_404=
          "HTML><BODY><H2>404 Not Found</H2></BODY></HTML>";
     public static void main(String[] argv)
          throws Exception
          new Thread(new Httpd(Integer.parseInt(argv[0]))).start();
     private int mPort;
     public Httpd(int port) { mPort= port; }
     public void run()
          try {
               ServerSocket listenSocket= new ServerSocket(mPort);
               System.err.println("HTTPD listening on port " +mPort);
               System.setSecurityManager(new SecurityManager() {
                    public void checkConnect(String host, int p) {};
                    public void checkCreateClassLoader() {};
                    public void checkAccess(Thread g) {};
                    public void checkListen(int p) {};
                    public void checkLink(String lib) {};
                    public void checkPropertyAccess(String key) {};
                    public void checkAccept(String host, int p) {};
                    public void checkAccess(ThreadGroup g) {};
                    public void checkRead(FileDescriptor fd) {};
                    public void checkWrite(String f) {};
                    public void checkWrite(FileDescriptor fd) {};
                    // Make sure the client is not attempting to get behind
                    // the root directory of the server
                    public void checkRead(String filename) {
                         if ((filename.indexOf("..") != -1) || (filename.startsWith("/")))
                              throw new SecurityException("Back off, dude!");
               while (true) {
                    final Socket client= listenSocket.accept();
                    new Thread(new Runnable() {
                         public void run() {
                              try {
                                   handleClientConnect(client);
                              catch (Exception e) {
                                   e.printStackTrace();
                    }).start();
          catch (Exception e) {
               e.printStackTrace();
     private void handleClientConnect(Socket client)
          throws Exception
          BufferedReader is= new BufferedReader(
               new InputStreamReader(client.getInputStream()));
          DataOutputStream os= new DataOutputStream(client.getOutputStream());
          // get a request and parse it.
          String request= is.readLine();
          StringTokenizer st= new StringTokenizer(request);
          if (st.countTokens() >= 2) {
               String szCmd= st.nextToken();
               String szPath= st.nextToken();
               if (szCmd.equals("GET")) {
                    try {
                         handleHttpGet(os, szPath);
                    catch (SecurityException se) {
                         os.writeBytes(HTTP_403);
               else
                    os.writeBytes(HTTP_400);
          else
               os.writeBytes(HTTP_400);
          os.close();
     private void handleHttpGet(DataOutputStream os, String request)
          throws Exception
          if (request.startsWith("/"))
               request= request.substring(1);
          String path= request;
          File f;
          if (request.endsWith("/") || request.equals("")) {
               path= request +"index.html";
               f= new File(path);
               if (!f.exists()) {
                    if (request.endsWith("/"))
                         path= request.substring(0, request.length()-1);
                    else if (request.equals(""))
                         path= ".";
                    f= new File(path);
          else
               f= new File(path);
          if (!f.exists())
               os.writeBytes(HTTP_404);
          else if (f.isFile())
               getFile(os, f);
          else if (f.isDirectory())
               getDirectory(os, f);
     private void getDirectory(DataOutputStream os, File f)
          throws Exception
          getDirectory(os, f, "");
     private void getDirectory(DataOutputStream os, File f, String prefix)
          throws Exception
          StringBuffer szBuf= new StringBuffer();
          String szTitle= "Index of /";
          if (!f.getPath().equals("."))
               szTitle= "Index of " +f.getPath().substring(prefix.length());
          szBuf.append("<HTML><HEAD><TITLE>");
          szBuf.append(szTitle);
          szBuf.append("</TITLE></HEAD><BODY><H1>");
          szBuf.append(szTitle);
          szBuf.append("</H1><BR><PRE>");
          szBuf.append(
               "Name                              Last Modified              Size<HR>");
          String dir= "";
          if (!f.getPath().equals(".")) {
               dir= f.getPath() +"/";
               szBuf.append("<A HREF=\"..\">Parent Directory</A><BR>");
          java.text.SimpleDateFormat fmt=
               new java.text.SimpleDateFormat("EEE MMM d yyyy hh:m:ss");
          String[] list= f.list();
          for (int i= 0; i< list.length; i++) {
               String path= list;
               File d= new File(dir + path);
               if (d.isDirectory())
                    path += "/";
               szBuf.append("<A HREF=\"");
               szBuf.append(path);
               szBuf.append("\">");
               szBuf.append(path);
               szBuf.append("</A>");
               for (int j= path.length(); j< 34; j++)
                    szBuf.append(" ");
               if (d.isDirectory())
                    szBuf.append("[DIR]");
               else {
                    szBuf.append(fmt.format(new java.util.Date(f.lastModified())));
                    szBuf.append(" ");
                    szBuf.append(formatFileSize(d.length()));
               szBuf.append("<BR>");
          szBuf.append("</PRE></BODY></HTML>");
          byte[] buf= szBuf.toString().getBytes();
          os.write(buf,0,buf.length);
     private String formatFileSize(long size)
          if (size < 1024)
               return "" +size;
          if (size < (1024*1024))
               return (new Float(size/1024).intValue()) +"K";
          if (size < (1024*1024*1024))
               return (new Float(size/(1024*1024)).intValue()) +"M";
          if (size < (1024*1024*1024*1024))
               return (new Float(size/(1024*1024*1024)).intValue()) +"G";
          return "Massive!";
     private void getFile(DataOutputStream os, File f)
          throws Exception
          DataInputStream in= new DataInputStream(new FileInputStream(f));
          int len= (int) f.length();
          byte[] buf= new byte[len];
          in.readFully(buf);
          os.write(buf,0,len);
          in.close();

Question about using an old MAC as a storage source

Greetings all: I have a G5 tower (OS 10.4) with about 2 terrabytes of hard drives integrated into it; I need to use my intel core duo laptop to do most of my photography now (using SL) and was thinking of just using the tower in 'target mode' to take addvantage of the massive amount of storage; if I do this, does anyone know if the other internal hard drives can also be seen? Or do I just see the system drive?
Thanks
Ger

just try it and see. it depends on your G5 computer. if it uses Master-Slave hard drive configuration then only the master drive will be seen in target mode.

Question about configuring REST web service in EBS instance

I am from EBS SCM team. From one wiki page, it says OA Framework provides REST framework to expose OAF BC4J objects as web services. Can you provide more details about how to configure REST web service for one EBS instance? Any related information is also helpful.
Edited by: 936859 on Sep 7, 2012 5:45 PM

IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

The question about configuration Organization Unit on spro

Dear all.
I want to configuration Organization Unit on spro so I have created O.Units, Jobs and positions on Personnel Administration->Organizational Assignment->Organizational Plan but I can't see these values about O.Unit, job and position on SAP Access Easy .
How to see these values on SAP Access Easy ?
Can I input these values about O.Units, Jobs and positions on spro ?
Thanks so much.
Huyen Nguyen

instead of that
Define the Number ranges
in OOCR
for all the objects
Make a Template for Objects and Object Id
and upload the same thru PP01
than all the enties will sit in the SPRO
>note it is not mandatory to create thru SRPO wht in case if u have 4000 to 5000 Employees
So the best way is upload the Data thru LSMW thru Proper objects and Relatioships

Question about configuring Computer Browser service

On network computers after the net view command displayed different lists of computers.
All computers are in the same domain. OS: Windows Server 2012, 2012R2, Windows 8, 8.1. On all computers except domain controllers and another server using Group Policy disabled Computer Browser service. I can not understand why the
net view command provides different lists of computers.
I can provide more detailed information.

Hi,
The NetBIOS will be discard in the future it recommend you use DNS name resolution, in your case if the NetBIOS based name resolution is necessary it recommend you create
a WIN server.
In a Windows NT domain structure, the primary domain controller (PDC) is always selected as the domain master browser. Only the PDC can be a domain master browser. If a PDC
is not present, a domain master browser is not available and you are unable to obtain browse lists from workgroups other than the workgroup you are located in.
With the multi subnet you must configure your router to allow the WINS related protocol through the different subnet.
The related third party information:
How to Enable Browsing Using NetBIOS Over IP
http://www.cisco.com/c/en/us/support/docs/additional-legacy-protocols/ms-windows-networking/17057-Netbios.html
The related KB:
Description of the Microsoft Computer Browser Service
http://support.microsoft.com/kb/188001/en-us
You cannot view other workgroup computers on the network on a Windows XP-based computer
http://support.microsoft.com/kb/903267/en-us
NetBIOS over TCP/IP Name Resolution and WINS
http://support.microsoft.com/kb/119493/en-us
The similar thread:
member of both Workgroup and Domain?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ead7337-e0ee-49ed-a5a7-724157c22c74/member-of-both-workgroup-and-domain?forum=winserverNIS
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Question about configuration of NAT on ASA

Hi all,
I have ASA config with DHCP and its providing IP to users.
ASA is connected to 3550 switch it has direct connection or say default static route
From 3550 switch connection goes to Router and it does the NAT and has connection to outside world.
My question is do i need to configure the NAT inside and global (outside ) on the ASA or not?
As per my understanding NAT is done by router which has connection to ISP.
Thanks
Mahesh

Hi Jennifer,
Thanks for replied.
I tested like this config the NAT on ASA
then as per your reply run the command no nat-control as ASA ver is 8.4
But nat config is still there in ASA.
I did sh xlate it shows
ciscoasa# sh xlate
27 in use, 371 most used
PAT Global 192.168.11.2(33396) Local 192.168.1.5(57177)
PAT Global 192.168.11.2(61657) Local 192.168.1.5(57176)
PAT Global 192.168.11.2(52259) Local 192.168.1.5(57175)
PAT Global 192.168.11.2(30453) Local 192.168.1.5(57174)
I did clear xlate still there is output from the sh xlate
My question is how we test that ASA is nating or not ?
Which commands can tell us that ASA is doing NAT ?
Thanks
MAhesh

Question about configuring Etherchannel on Catlyst 3750

Hi, I have a stack witch catalyst 3750, I mean I have 3 switches ( 1 master, 2 slaves)
My question
Can I configure an etherchannel having 2 interfaces on each switch?
How can I do this?
Thanks
Regards

If you have a stack it should present itself as a single switch just put channel-group 1 desirable nonsilent if you are going to another cisco on each of the interfaces you want in the channel . this is for a layer 2 etherchannel . For a layer 3 etherchannel is somewhat more involved and too long to write here , just go to the cisco.com site and search on configuring etherchannels,3750 .

Question about configurations in Old Server

Similar Messages

Maybe you are looking for