Question about eVo3 case

I'm considering the iskin eVo3 case for my 30gig 5g ipod but I can't tell if I remove the best clip from the case, will it still have a plastic knob on the back or will it be able to lay flat on my dashboard. Any help would be appreciated. Thanks.

Read this:
"Included with every eVo3 is the sleek and functional RevoClip 2. This low-profile polycarbonate clip rotates to give you the best angle to control your iPod when clipped to your belt. It can be completely removed so that you can easily slip your iPod into a pocket or bag."
Hope this helps.

Similar Messages

Question about top case

Hi there,
I'd like to know if the "top case/keyboard" part also includes the trackpad?
I'm asking because I just had the top case replaced (was interfering with the fan that produced a clicking sound) and it looks like they replaced it with a used one?! For example, the bottom left corner shows a 1.5 inch square, lighter gray patch (as if there was a sticker there?), and the middle of the trackpad button is very shiny compared to the sides, like it's been used...
Thanks for any input!
whitebook 2.0Ghz - 4H622 Mac OS X (10.4.7) 2GB RAM

The top case includes the trackpad and trackpad button.
This is at the moment a bit of a sore subject with me. After my MacBook was returned from being repaired for the random shutdown problem, the trackpad button does not respond at all to clicks in the lower right corner. (The repair consisted of replacing the top case and heat sink.) So half the time when I click the button, it doesn't work, because the right end is where I click most often.
Yesterday I talked to AppleCare phone support, and the Product Specialist suggested I talk to a store Genius, that maybe it could be fixed or else the turnaround for a new top case would be faster than shipping.
I did that this morning, and the Genius claimed that the behavior was within specs, that it would not bother his typing since you're supposed to click in the middle of the button, that it was equivalent to complaining about a couple of dead pixels.
I haven't had a return call yet from the Product Specialist, and I'm currently planning on trying a different Apple store tomorrow.
I see "mushy trackpad button" is one of the common complaints on web forums:
http://www.mymac.com/showarticle.php?do=something&id=1572

I HAVE A QUESTION ABOUT USING CASE STRUCTURE

Can I compute a percentage using case structure?
In the following query below, I have been able to use CASE STRUCTURE to add to a counter when days were between 0 and 30, or when days were between 31 and 60 or when days were between 61 and 90 or when days were between 91 and 9999. I have also been able to get a GRAND TOTAL of all days between 0 and 9999. This is done in the LAST ITEM of the SELECT STATEMENT. The FIRST ITEM of the SELECT STATEMENT counts rows of records being processed. I want to take the LAST ITEM of the SELECT STATEMENT and MULTIPLY it by 100 and then DIVIDE it by the FIRST ITEM of the SELECT STATEMENT to get a percentage. I know that you can do this with numeric fields in a file but is there a way to do this in CASE STRUCTURE with calculated totals?
SELECT
count(distinct v.rowid) v_cnt,
SUM(CASE WHEN(V.LCL_ER_RECV_DT - ADD_MONTHS(V.IND_ER_PER_END_DT,3)) BETWEEN 0 AND 30 THEN 1
ELSE 0
END) one_mo,
SUM(CASE WHEN(V.LCL_ER_RECV_DT - ADD_MONTHS(V.IND_ER_PER_END_DT,3)) BETWEEN 31 AND 60 THEN 1
ELSE 0
END) two_mo,
SUM(CASE WHEN(V.LCL_ER_RECV_DT - ADD_MONTHS(V.IND_ER_PER_END_DT,3)) BETWEEN 61 AND 90 THEN 1
ELSE 0
END) three_mo,
SUM(CASE WHEN(V.LCL_ER_RECV_DT - ADD_MONTHS(V.IND_ER_PER_END_DT,3)) BETWEEN 91 AND 9999 THEN 1
ELSE 0
END) three_pl_mo,
SUM(CASE WHEN(V.LCL_ER_RECV_DT - ADD_MONTHS(V.IND_ER_PER_END_DT,3)) BETWEEN 0 AND 9999 THEN 1
ELSE 0
END) TOT
FROM NCOER V, NCOER_IN_ERROR NIE, NCOER_ERROR NE, ALL_CMD_VIEW ACV
WHERE V.MIL_CMD_ASGN_CD IN ('FC')
and v.lcl_er_form_cd = '4'
and acv.cmd_cd = v.mil_cmd_asgn_cd
and nvl(acv.lcl_code_stat,'N') = 'Y'
and NVL(v.lcl_omit_from_stats_ind,'N') <> 'Y'
AND V.PSC_CD IN ('FS10')
AND (V.LCL_ER_RECV_DT >= '01-MAR_2007' AND V.LCL_ER_RECV_DT <= '31-MAR-2007')
AND V.IND_SSN = NIE.IND_SSN(+)
AND V.IND_ER_PER_END_DT = NIE.IND_ER_PER_END_DT(+)
AND V.LCL_ER_RECV_DT = NE.LCL_ER_RECV_DT(+)
AND V.IND_SSN = NE.IND_SSN(+)
AND V.IND_ER_PER_END_DT = NE.IND_ER_PER_END_DT(+)
AND V.LCL_ER_RECV_DT = NE.LCL_ER_RECV_DT(+)

Solution for you:
SELECT
COUNT(V_CNT) PROCESS_RECORD,
SUM(CASE WHEN(PROCESS_MONTHS) BETWEEN 0 AND 30 THEN 1
ELSE 0
END) ONE_MO,
SUM(CASE WHEN(PROCESS_MONTHS) BETWEEN 31 AND 60 THEN 1
ELSE 0
END) TWO_MO,
SUM(CASE WHEN(PROCESS_MONTHS) BETWEEN 61 AND 90 THEN 1
ELSE 0
END) THREE_MO,
SUM(CASE WHEN(PROCESS_MONTHS) BETWEEN 91 AND 9999 THEN 1
ELSE 0
END) THREE_PL_MO,
SUM(CASE WHEN(PROCESS_MONTHS) BETWEEN 0 AND 9999 THEN 1
ELSE 0
END) TOT,
(SUM(CASE WHEN(PROCESS_MONTHS) BETWEEN 0 AND 9999 THEN 1
ELSE 0
END) *100/COUNT(V_CNT)) TOT_PER
FROM
(SELECT     V.ROWID V_CNT, V.LCL_ER_RECV_DT - ADD_MONTHS(V.IND_ER_PER_END_DT,3) PROCESS_MONTHS
FROM     NCOER V, NCOER_IN_ERROR NIE, NCOER_ERROR NE, ALL_CMD_VIEW ACV
WHERE     V.MIL_CMD_ASGN_CD IN ('FC')
AND     V.LCL_ER_FORM_CD = '4'
AND     ACV.CMD_CD = V.MIL_CMD_ASGN_CD
AND     NVL(ACV.LCL_CODE_STAT,'N') = 'Y'
AND     NVL(V.LCL_OMIT_FROM_STATS_IND,'N') <> 'Y'
AND     V.PSC_CD IN ('FS10')
AND     (V.LCL_ER_RECV_DT >= '01-MAR-2007' AND V.LCL_ER_RECV_DT <= '31-MAR-2007')
AND     V.IND_SSN = NIE.IND_SSN(+)
AND     V.IND_ER_PER_END_DT = NIE.IND_ER_PER_END_DT(+)
AND     V.LCL_ER_RECV_DT = NE.LCL_ER_RECV_DT(+)
AND     V.IND_SSN = NE.IND_SSN(+)
AND     V.IND_ER_PER_END_DT = NE.IND_ER_PER_END_DT(+)
AND     V.LCL_ER_RECV_DT = NE.LCL_ER_RECV_DT(+) )
Regards,
Rajs
www.oraclebrains.com

Question about this case statement...Never seen it written this way

I have this case statement written by a developer and i am trying to understand what he was trying to accomplish with writing it in this manner
CASE t_CELL
                WHEN 'XML' THEN
                    'Mods'
                ELSE
                    CASE WHEN t_CELL IS NOT NULL THEN
                        t_Cell
                    ELSE
                        CELL
                    END
                END
            = CELL OR CASE t_CELL
                WHEN 'XML' THEN
                    'Amps'
                ELSE
                    CASE WHEN t_CELL IS NOT NULL THEN
                        t_Cell
                    ELSE
                        CELL
                    END
                END = CELL);What is throwing me off is the = CELL that was included..Kindly note, this is just a sample code

Hi,
If x and cell are strings, then I trust you understand what it means to compare them by saying:
x = cellx can be any kind of expression that returns a string.
For example, do you understand what it means if x is a string literal, like this?
'Amps' = cellDo you understand what it means when x is another string column, like this?
t_cell = cellDo you understand what it means when x is a function that returns a string, like this?
TO_CHAR (SYSDATE, 'Dy') = cellIn the code you posted, the CASE expression is just another way of specifying a string value for x:
CASE ... END = cellA CASE expression is just another kind of expression, that is, another thing that can replace x on the left of the = sign.
It looks like the condition you posted is equivalent to:
(     (     t_cell     = 'XML'
     AND     cell     IN ('Amps', 'Mods')
OR     (     t_cell     != 'XML'
     AND     cell     = t_cell
OR          t_cell     IS NULL
)

Question About Vaja Cases

I recently bought a neoprene case for my Zen Touch (not from Vaja). All well and good.
At the same time, I also bought a rubberized skin for my Touch. Great.
But the thing is, I can't fit the Zen Touch into my neoprene case while the skin is attached. Anyone know whether the Vaja cases would be able to fit the Zen Touch with the skin on it's
Thanks. I hate to think that I spent $80 for these two items and can't use one without the other.

All Vaja cases I've see have a 'snug' fit and my guess is that it wont fit while the silicone case is on.

Question about E1 cas?

Hi all,
why in E1 CAS,
the command for timeslot is
ds0-group timeslot 1-15,17-31 type xxx?
as we know that, CAS, using robbed bit signaling.
why not
ds0-group timeslot 1-31 type xxx for the CAS?
and,
as far as I know, timeslot 1st for framing, why timeslot 1st, included in
ds0-group command

The Stuff in the signature will apply on May 31st(as I have said).
At present the PSU and graphics card, plus graphics drivers are not as posted.
It's at 2.5 at present and doing fine.
Thanks syar, I'll amend the settings on Tuesday 31st May
PM with my thanks in your inbox
Your comments appreciated

Question about CL(CAS Latency) in Bios

Currently the C.L is on 2.5.
There is an option for 2.0 in the Bios.
I was wondering if such a setting would make any difference to the PC's stability or performance
Answers ASAP please.
Thanks

The Stuff in the signature will apply on May 31st(as I have said).
At present the PSU and graphics card, plus graphics drivers are not as posted.
It's at 2.5 at present and doing fine.
Thanks syar, I'll amend the settings on Tuesday 31st May
PM with my thanks in your inbox
Your comments appreciated

Question about autodiscover in case of multiple bound namespace

Hi Experts,
I have a question about the autodiscover behaviour. Let's assume we have the below infrastructure:
SiteA :
MBX-Server-SiteA : Member of a DAG
CAS-Server-SiteA : outlook anywhere url = siteA.domain.com
SiteB :
MBX-Server-SiteB : Member of a DAG
CAS-Server-SiteB-1 : outlook anywhere url = siteB-1.domain.com
CAS-Server-SiteB-2: outlook anywhere url = siteB-2.domain.com
We have DB-1 and DB-2 that have copies in both MBX servers.
My question is how does exchange select the access URLs to return in the autodiscover process? I know that it depends on where the mailbox is hosted but can't find details about the process in the technet articles.
Thanks.

There's quite a few details that are involved in the Autodiscover process. First of all - probably the most important thing is that there are 2 stages to the whole process.
In the first stage, the client is simply concerned with getting the address of a CAS server that will help it further. We'll keep things simple and assume your scenario where the client is located inside the network and is domain-joined. The details of the
LDAP query are detailed in
this link. (At the time I was investigating this I've actually went ahead and ran the queries using the ldp.exe client against the Configuration partition of the respective AD domain - it's worth seeing the actual responses.) An interesting trick here is
the 'keywords' attribute that's stamped on those SCP entries. The reason behind it is that you don't want a client located in a site to go half across the globe in order to connect to a CAS server, when there's one available in its own site. One simple way
to get the 'keywords' attribute stamped is through the Set-ClientAccessServer cmdlet, using the -AutodiscoverSiteScope parameter. In your example, you'd probably want to run it against the CAS server in Site A and specify the name of the corresponding AD site
('SiteA') and correspondingly against the 2 CAS servers in Site B (using 'SiteB'). Once the client has got the response to his query, it will attempt to select one server that's handling the site he's in (essentially it will filter the results based on 'keywords'
-contains <client-site>). Now that we got our endpoint we can go to stage 2.
In stage 2, the client will actually use EWS in order to query the Autodiscover service itself running on our target server. There are 2 possible interfaces of accessing the Autodiscover service: POX (Plain Old XML) and SOAP. POX will be targeting the ../Autodiscover.xml
URLS, while the SOAP one will be using ../Autodiscover.svc URLs. Details about this including some hardcoded parts are
here. What happens next is detailed in point 3, section 2.1 The Autodiscover Process
here. This last link is the key to the whole process:
"It provides a list of CAS that has AutodiscoverSiteScope information set for the
Associated AD site of the Database where the client Mailbox is located."
In other words, the CAS is smart enough to return the URLs belonging to a CAS server in the AD site where the client's mailbox' database is active.
My advice is to test this on your scenario. Tests can be done here first-hand: the Outlook's tray icon Test E-Mail AutoConfiguration can be used or alternatively - if you want to see the details in the communication - SoapUI
for the SOAP access method, for POX there's an extension called 'Postman for Chrome' that can be used. I've used all these in my tests back when I was fighting conflicting results from the articles around the web about Autodiscover.
That's a long way of saying we get the AutoD URL of a CAS server closest to the workstation, which then provides the configuration to use which are the the URLs closest to the mailbox :)
By all means look at the SOAP response, but Outlook will only use POX. Lync does SOAP along with other 3rd party apps.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Question about cases...

hey guys,
I'm going to be getting an ipod touch in the next couple weeks if not sooner but before i do i want to get a case so i can keep it from getting dinged up and stuff. my main concern is the screen cracking on me, i've heard alot of people saying that their screens cracked pretty easily and so i'm trying to avoid that by getting a nice case, so my question is which case is the best case for keeping the screen safe from being cracked? if it'd help any i'm looking at a leather folio type case so at the very least the screens covered most of the time. if someone could help me with that it'd make things alot easier. thanks.

Go HERE
I got one of the leather ones.
Also, go HERE. I got the red Wrapz.
Understand that a case won't keep the iPod from cracking if you stick it in your pocket and sit on it, etc.
There are tougher cases, but mostly, they're meant to keep it looking good, not protect from major damage.
Also check out ilounge.com - tons of reviews and info.
Scott

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Re: Questions about Plan structure

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Questions about Contracts and New Phones

I've had some questions about how upgrading and adding new lines to a contract works and I haven't been able to find the answers through Google. First some background information: We started this most recent contract in September of 2011 and as such the current contract will end September of 2013. According to the phone information portal, all three of the devices on my account will be eligible for an upgrade this Saturday (May 4th, 2013). My daughters birthday just so happens to coincide with that date and as such we were planning on surprising her by taking her to buy a new phone and we are going to allow our son to upgrade his phone as he has been asking to for a while.
Is there any way of locking/limiting the amount of data allowed for each phone on a shared plan? I'm worried that my daughter will go way over our limit and not pay attention to the point where she will end up costing us a very large amount of money
Does adding a new line require the start of a new contract?
My son was interested in purchasing the "Samsung Galaxy S4" and has noticed that pre-orders for that phone are currently available. Is it possible to pre-order the phone on that date using the upgrade so that the price will be reduced?
If the answer to number 2 is a no, does adding the new line take away the upgrades from other phones or would he be able to go to the store past the release date and upgrade then?
Thanks for taking the time to read through all of this. Any help that I receive will be extremely appreciated.

1. Yes. There is an additional fee per line you wish to do this for. When you add the line you can choose this option and set the data amount it is allowed to use.
2. Yes. Each line is a separate contract with its own expiration date.
3. The contract starts when you sign up for the contract. The amount will be pro-rated on the plan if it is not started until part-way through your billing cycle that is what you are asking. Doing the pre-order just guarantees you the phone in case they sell out.
4. No it will not take any upgrades away as each line has its own termination date. You can move upgrades around between lines though.

Some question about International Travel

Ok so i know alot of people have question about international travel weather is USA to Canada, Canada to USA or where ever.
So i just got off the phone with someone from AT&T these are my questions for them. i hope it can help, im confuse myself.
*1. I travel recently travel to canada a few weeks ago, when i cross the boarder i switch the data roaming ON and it picks up Rogers Wireless, a few days ago i try i again it said NO SERVICE is something wrong with my iPad?*
NO, consider yourself lucky u didnt get charge for that roaming, your ipad well not work out of the US unless u buy one of our International plans that AT&T has provided. The reason for this is so you wont have any unwanted charge or high charge on your bill.
*2. If i was to buy a sim card from Canada and pop it in to my US ipad well it work?*
Honestly that's something you can try at your own risk, it's design for AT&T so by switching sim cards it may affect your ipad such as running slow, virus, crash. You can try it, i dont work for Rogers so i know nothing about them, i work for AT&T so i can only tell you about our plans and i wont lie to you.(I THINK U JUST DID) This ipad is not unlock just like the iphone so it well only work with AT&T.
*3. If i pop my sim card out and put in an international sim card well it affect my plan at all or in any way?*
Yes it can, right now your on the unlimited plan if you put in a different sim card and then re-put in ur AT&T one chances are you're going to loose your unlimited plan and have to settle for the newer plan. That's why AT&T has reduce it's international plans so people are more likely to use it. It's a contract we sign with Apple, if u want to use in canada you can always buy an Ipad in canada and use their plan. (***)
At the end of this conversion i was just more angry with them. All in all she told bottom line is dont do anything stick with AT&T and pay for international plans. So i have to pay over price data plan if i want to use it intertanional? or i have to buy an ipad for each international places i go to?
Has anyone try or done any of the 3 ive mention and did it affect ur plan or ipad in anyway?
Thanks
Andy

Ok so here's a little more info
I called AT&T again today asking them the same question the guy was more helpful then the one yesterday. Even though he kinda told me the same saying that the ipad need to be unlock. , Afterward he transfer me someone from Apple. The lady told me
1. The ipad is UNLOCK so dont bother trying to get it unlock.
2. she doesnt see why sticking in another sim card from one of the apple ipad carrier is a problem. U would just have to sign up activated it like u would when u first got it.
3. Contact phone company (my case Rogers) to see if they carry the mico sim cards.
4. She doesnt see why it would affect the current plan u have now.
So at the end of all that she told me, seem like AT&T is just telling you, you cant do this or u shouldnt do that is simple THEY WANT YOU TO USE THEIR PLANS.
so with that i said i just want to let everyone know. I'm gonna go pick my Micro sim cards from Canada in a bit and sign up for thier plan we'll keep everyone updated if anything change or how it work

Question about eVo3 case

Similar Messages

Maybe you are looking for