Question about firewire AC adaptor and iPod Nano (1st and 2nd gen)

I have an AC adaptor from the Mini, model #A1070 W008A130 and I was wondering if it was compatible with both the 1st and 2nd gen Nanos.
I've been unable to find any power specifications and just want to make sure I'm not going to burn both mine and my girlfriend's Nanos out when we charge them away from a computer.
Thanks in advance.

I have an AC adaptor from the Mini, model #A1070
W008A130 and I was wondering if it was compatible
with both the 1st and 2nd gen Nanos.
I've been unable to find any power specifications and
just want to make sure I'm not going to burn both
mine and my girlfriend's Nanos out when we charge
them away from a computer.
Thanks in advance.
You won't burn anything out.

Similar Messages

  • The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??

    The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??

    The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
    I assume you have seen this article yet?
    iPod display's a sad iPod icon
    If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
    https://discussions.apple.com/thread/1193481?start=0&tstart=0
    B-rock

  • I have both iPod nano 1st and 2nd generation, neither shows in iTunes since i installed yosemite, Icon shows on mac desktop , with a few empty folders inside

    I have both iPod nano 1st and 2nd Gen . Neither are appearing in iTunes since Ive installed Yosemite, both appear on desktop and iTunes launches when i plug nano in to mac

    Hi Phil.Surf 16,
    Thanks for the question. Based on what you stated, it sounds like the iPod is not in iTunes. I would recommend that you read this article, it may be able to help the issue.
    iPod not appearing in iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • Itunes will not update/sync ipod shuffle (1st or 2nd gen).

    Hello -- I've seen a few postings with similar issues, but no answers that work yet, so I'm hoping someone may be able to help.
    Recently, I can not get itunes to sync or update either my 1st or 2nd gen shuffle. itunes sees it and diagnostics says everything is fine (although the diag program takes 5-7 mins to run). Non-shuffle ipods work fine on the same USB port. Also, the shuffles work fine on other computers.
    I have deinstalled/reinstalled itunes, as well as the USB driver. I downloaded the reset utility for both shuffles and run. No difference after any of these efforts.
    The problem is the same for autofill or drag/drop. itunes says not to disconnect the ipod as it's sync'ing and the little sync symbol appears next to the shuffle, but itunes just locks up ~5 mins. It returns w/o an error message, but nothing has been copied. It's the same whether I try to copy 1 or 100 songs.
    Any help will be appreciated. I'll cross post in 1st gen discussion as well.
    Thank you,

    None of the suggested fixes in the knowledge base article you referenced resolved this issue for me. Further, I cannot use the iPod Reset Utility to restore the iPod as it is not 64-bit OS compatible.
    I have been unable to sync my iPod Shuffle 2nd Gen with iTunes since the release of 8.1.1.10. The new release 8.2.0.23 has not resolved the issue. Hopefully Apple will take notice of all the problems here on the forums and release either an iTunes or firmware patch to resolve these problems.
    Message was edited by: Amp300

  • Vista Ultimate and iPod Nano Drag and Drop

    I upgraded my laptop to Vista Ultimate (which it is not) and I have iTunes 7.1.1.5 running. I use a shared network drive for my music library. I have a 80 G Video IPod that syncs up with no (known) issues. I just got a new iPod Nano and iTunes will recognize it but i can not load music manually. When i try to drag and drop music from my library onto the iPod Nano the drag function does not work. Does anyone know what to do?

    I upgraded my laptop to Vista Ultimate (which it
    is
    not) and I have iTunes 7.1.1.5 running. I use a
    shared network drive for my music library. I have
    a
    80 G Video IPod that syncs up with no (known)
    issues.
    I just got a new iPod Nano and iTunes will
    recognize
    it but i can not load music manually. When i try
    to
    drag and drop music from my library onto the iPod
    Nano the drag function does not work. Does anyone
    know what to do?
    Make sure "Manually manage music" is checked in
    Options under Summary.
    I just dealt with this situation with a daughter's
    replacement nano...
    I do have the manually managed option selected. The setup I am using is similar to the other iPods I have been using. I believe this issue is vista ultimate.
    IBM Laptop Windows Vista

  • IPod nano Lanyard Headphones 2nd gen problem

    I have been using it for about 3 months. The left ear one's volume suddenly decreases to about half of the right one's volume while I was listening for an hour. How long can this headphones last? Does it have any form of warranty? And is there any way to fix this?
    Message was edited by: jason32choy

    on all nanos, the headphone hole is on the bottom. the only thing on the top of the nano is the hold switch.
    unless i misunderstood your question, no, it won't work.

  • Syncing iPhone and ipod nano toi the same iTunes

    I have an iPhone (16GB) and and Ipod nano (4GB) and about 9GB of content in my iTUnes. IS it possible to sync both these to the same iTunes library on the same pc. All the iTunes content is on the iPhone but it is too much for iPod nano. I use the two for different things for eg: the nano has nike Plus on it and I also use it for gym etc
    in Effect, can you have 2 different libraries to sync with different ipods on the same PC and iTunes

    Yes, you can use multiple devices with one library, I use 2 regular iPods and a shuffle (I have a friend who syncs both an iPhone and a Nano, she syncs each with it's own separate playlist). You can for instance have one sync the entire library and another sync a selected playlist or playlists. iTunes recognises each device that is connected and they can each have their own individual settings: There are several different ways to use multiple devices with one computer, you can read more heres: How to use multiple iPods with one computer

  • IPod nano 1st refused iPod nano Replacement Program because not boot to normal screen.

    I am not strong in english.
    I have iPod nano 1st and problem with battery broken. batterry in iPod make my iPod cover glass broken.
    I claim to icare in chiang mai (Authorized Service Provider in Chiang Mai Thailand) but refuse because iPod can't boot to normal screen.
    iPod nano Replacement Program must boot normaly.
    I try to call 001800 4412904 (apple support) can't call no signal everytime,

    Thanks!

  • Ipod Nano 5G and Itunes 10

    I have ipod nano 5g and i have itunes 10 but when i open itunes nd appsore i dont see any ipod nano 5g(so to click wheel games ) and other stuff specific to 5g.
    A simple filter in itunes store for the apple device a person using is a bit of common sense which apple seems to lack(not just for iphone/ipad).
    : PS : I am located in India.
    the store designed in no way to be user friendly and more cluttered than organized for an application for a company like apple

    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding.
    Post your complaint on the http://www.apple.com/feedbackProduct Feedback website.

  • Can you connect and ipod nano 4/5th generation with and ipad to download music/update software

    Can you connect and ipod nano 4/5th generation with and ipad to download music/update software.
    If so how do you go about it and what equioment are you required to purchase.

    No you cannot.

  • I dropped iPod nano (4g and 5g) in water...what do I do ?

    I dropped iPod nano (4g and 5g) in water...what do I do ?

    You should placed the soaked iPod in a sealed container of dry rice for about a week while changing out the rice daily.  Do NOT attempt to power it on before then.
    If you have already, there is a good chance it could have fried some of the iPod's internal components.
    B-rock

  • Ice-Link Plus and iPod Nano 3G

    Hi,
    I've been using an Dension Ice-Link plus and iPod Nano 1G in my Alfa GT for two years without any problem. Now I'm thinking in buying a new Nano 3G but I don't know the Ice-Link is fully compatible with the new Nano 3G.
    The Dension Support hasn't answer yet to this question.
    I suppose it will be as the base connector haven't changed but I'd like to know if someone in this forum could confirm it or not.
    Thanks,

    I use the Ice Link Plus in my BMW, and I can confirm that the Nano 3G indeed works with my system. Ought to work with yours aswell.
    Must say that I'm a bit disappointed on Dension aswell... they could have done this test and written some info on their site. Buying the Nano 3G was a bit of a gamble for me =)

  • Something new about for new update for ipod nano 6th generation

    Hello,something new about for new update for ipod nano 6th generation , clock faces and others..

    What on Earth are you talking about???

  • Ipod nano 7g and Polar Wearlink+ Nike+ Heart rate receiver

    Hello to everybody, I am struggling in finding information about the compability between Ipod nano 7g and Polar Wearlink+ Nike+ Heart rate receiver without using any additional receiver.
    Documentation posted on Apple, Nike and Polar websites only mention ipod nano 6g.
    Could you please shed some on this?
    Many thanks.
    Fred

    If it is compatible with Nike + it will work with the 7th Generation Nano.

Maybe you are looking for

  • Carriage Returns / Line Breaks & PDF

    I have a requirement to display a customers address in 1 column of a PDF report. The address is stored in the RPD as Address1, Address2, etc. etc. I use the answer of the question "Carriage Returns / Line Breaks" as a basic startup. ( Question Regist

  • SWN_SELSEN not working in test client after client-copy

    Hi all, We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items.  Because

  • Sequence Number in File Name

    Hi All, I have a requirment where the Output file name should be appeneded with a sequence number which needs to be in sync with the number of records processed. Each time this sequence has to be started from the previous number where it ended. The s

  • Class descriptions are not shown with SDK 3.5

    Hi everybody, I'm using a stand-alone version of Flash Builder 4 on Snow Leopard. When I use the 4th Flex SDK, the documentation for the classes from the SDK (e.g., mx.controllers.Button) is shown in the tooltip (or the ASDoc-View). When using Flex S

  • Random questions on a DVD quiz?

    Hi, For one of my college projects I have to produce an interactive DVD quiz. The main issue though is, can I make a DVD quiz that will have random questions (video / screenshot) everytime? Is this possible with DVD Studio Pro? If so, how? Is it a si