Question about loading hierarchy
Hello expert,
I have some question about hierarchy loading:
(1) hierarchy DS are all for BW3.X? does it need DTP for this loading ?
(2) in Process chain, "DTP process" or "saving hierarchy process" are all needed in PC ? or just one of them is needed?
Many Thanks,
You do not need DTP to load hierarchy.
In the PC, you need to add the info package and after that attribute change run to load the hierarchy fron hierarchy DS.
Regards,
Gaurav
Similar Messages
-
Newbie question about loading servlets on tomcat
I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
http://localhost/servlet/HelloServlet
Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
Many thanks
MarcYou have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
<web-app>
<servlet>
<servlet-name>HelloServlet</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/HelloServlet</url-pattern>
</servlet-mapping>
</web-app> -
Question about Load balancing with IISPROXY
Hi,
We are running WLS 5.1.0 SP5 on NT 4.0 SP6. We are not using clustering.
We are able to round robin between multiple instances of the WLS successfully.
Question: If one of the instances of WLS goes down, is there any way to configure
the plugin to take it out of the loop automatically (without using clustering)?
Thanks,
Anil.
This is not the syntax. Syntax is just this:
MaxSkips=something.
eg: MaxSkips=25
The doc says:
5:10:1000 for min:default:max
By which we mean that default value is 10, max is 1000 and min is 5. I guess the
docs are confusing about the syntax here. We will correct them.
--Vinod.
Anil Kommareddi wrote:
> Vinod,
> I could not find any documentation on the MaxSkips parameter except in the Service Pack
> docs. The syntax is MaxSkips=min:default:max.
>
> how do the min and max parameters work?
>
> Vinod Mehra wrote:
>
> > Even if the servers in the WebLogicCluster list are non clustered you WILL be
> > able to do load balancing. But the problem is if the servers go down the plugin
> > will not remove them. But it not that bad. If an connection attempt fails the
> > server is marked as bad and will be skipped for the next MaxSkips (default=10)
> > cycles of load balancing. MaxSkips parameter is configurable for IISProxy
> > (SP4 onwards, I think).
> >
> > -Vinod.
> >
> > Prasad Peddada wrote:
> >
> > > I believe there won't be any load balancing unless you use servers in a cluster. As
> > > an alternative you can use hardware load balancers directly in a situation like this.
> > >
> > > Anil Kommareddi wrote:
> > >
> > > > Hi,
> > > >
> > > > We are running WLS 5.1.0 SP5 on NT 4.0 SP6. We are not using clustering.
> > > > We are able to round robin between multiple instances of the WLS successfully.
> > > >
> > > > Question: If one of the instances of WLS goes down, is there any way to configure
> > > > the plugin to take it out of the loop automatically (without using clustering)?
> > > >
> > > > Thanks,
> > > > Anil.
> > >
> > > --
> > > Cheers
> > >
> > > - Prasad
-
Questions about keyword hierarchy
I'm in the process of designing and building a keyword hierarchy for LR3.5, and I'm at a loss to understand a couple of things.
In the process of deciding how to build this, I've looked at a number of hierarchies people have posted to the web. One thing I've noted is that people sometimes have the same word in multiple hierarchies, and sometimes the same word as both a regular entry and as a synonym. For example:
Architecture
Building
Church
{Cathedral}
Cathedral
Skyscraper.....
Cities
Building
Cathedral....
So what happens if I use the keyword building?
I *think* what will happen is that LR gives me a choice of selecting Building>Architecture OR Building>Cities. Is that correct? Is there a way to get Building, Cities AND Architecture? What happens if I select Cities? Do I get ONLY cities, and none of the lower level keywords?
And I'm at a total loss about synonyms. If, while applying keywords to an image, I select the synonym {Cathedral}, under Architecture, what keyword(s) get assigned to the image? What if I select Church? And what if I select Cathedral under Cities?
Many thanks.Thanks web-weaver.
I posted basically the same question in a couple of other places, and got conflicting answers. And the information I found on web searches tended to explain HOW to set up a hierarchy, but not how it really worked, and information on synonyms is especially limited, and often conflicting. So I did some tests. So as to not use any words that were already in my keyword list, I built a simple hierarchy of words not currently in use:
Colors
Blue
{Cyan}
{Azure}
Red
Pink
Salmon
Rose
Green
{BRG}
{Emerald}
Cyan
Orange
Fruit
Orange
Apple
(I actually had a couple of other trees, but this is enough to demonstrate how they actually work.)
And it turns out synonyms don't work quite like I expected them to, and are, honestly, so limited I question their value.
Test1: Tag a photo with the keyword Cyan. Only Cyan gets applied to the metadata, not any of the words associated with it (Blue, Colors, Azure). Searching, I can find the image by searching on Cyan, or Colors. But NOT by searching on Blue.
Test2: Tag a photo with the keyword Blue. Only Blue gets applied to the metadata, not Cyan, or Azure. When searching, I can find it by searching on Blue, or any of it's synonyms (Cyan, Azure), or Colors.
(I had expected synonyms to work the other way, I think. So that if I searched on Blue I'd get all images tagged with Blue, but also those tagged with Azure and Cyan. )
Test3: Tag one photo with Cyan, and another with Blue. Searching with Cyan gets me both images, as does searching with Colors. Searching on Blue gets me only the image tagged with Blue.
Test 4: Tag a photo with the word Colors (and nothing else). I find it by searching ONLY on colors, not Blue, Cyan, or Azure.
Test 5: Tag a photo with the word Red (and nothing else). I find it by searching on Red, or Colors, but not Pink or Rose.
Test 6: Tag a photo with the word Pink (and nothing else). I find it by searching on Pink, Red or Colors, but not Salmon.
Test 7: Tag one photo with Orange->Color, and a second image with Orange->Fruit (this nomenclature seems backwards to me, btw. It's really Fruit-Orange and Color-Orange, but whatever...) Searching on Orange finds both images. Searching on Color finds only one, searching on Fruit finds only the other.
Synonyms affect only search, and not tagging (assignment). Searching on a term that is a synonym will find images tagged with the main word. (e.g., search on Azure and you'll find Blue, but not Colors).
On another site someone replied that when you search you'll find "any image which bears that keyword or any keyword BELOW it in the hierarchy." That's backwards, at least as I understand the word "above.". You'll actually find images using the keyword, it's alias, or any word ABOVE it in the hierarchy. So if an image is tagged with Red, you can find it by searching on Red or Colors, but not Pink. If the image is tagged with pink, you can find it with Colors, Red or Pink, but not Salmon.
The worst limitation of using synonyms is that when you're tagging an image, LR3 isn't smart enough to know the synonyms exist. So if I tag an image with the word Azure, LR3 doesn't substitute Blue, or use the synonym where it already exists in the hierarchy. Instead, creates a new, top level entry named Azure, not tied in any way to the alias or the "Colors" tree.
It seems like it would be useful to be able to enter Blue as a search term and find any images tagged with Azure and Cyan. Or enter Red as a search term and find Pink and Rose, too. The way it's implemented now forces you to enter the term you're most likely to use (Blue, for example) at the bottom of the hierarchy, and the least used words above. Or to use synonyms, and hope you never get confused an enter a synonym as a keyword instead of the word it refers to.
It seems to me it's more useful to just use Azure as another keyword beneath (or maybe above) Blue in the hierarchy. At least that way if I tag an image with Azure, I'm not creating a new entry in the Keyword list. I'm not sure I see much value in synonyms as they're currently implemented, but if someone has some examples of how synonyms benefit them I'd be delighted to see them.
Hopefully this information will be of use to someone. -
Question about loading and using Images.
I know how to load an image and to draw it onto a canvas etc etc. However my question is to do with the efficiency of loading multiple images (possibly the same image!) and using them together. I have multiple objects, all instances of the same class, which all draw themselves onto a screen in different positions. However they all use the same 3 images (depending on an internal state).
So if I create 5 of these objects and each object calls to load the same image using something along the lines of:
url = this.getClass().getResource("MyImage.png");
normalImage = Toolkit.getDefaultToolkit().getImage(url);Does this mean that in the memory there are 5 exactly the same copies of this image? Or does java do something clever and use one image that they would all reference? I suspect I will have 5 in memory but I wanted to ask about this before going and making an imageManager class where I load all the images and just use getMethods in that when drawing. I will not be preforming any transforms or anything on any of the images so they can all literally be the same image but simply drawn in multiple positions on the one canvas.
(note: I am using active rendering to draw these images myself and then blit it to the screen ...).Use ImageIO rather than Toolkit--with Toolkit you need to use a MediaTracker to ensure you have your image loaded before you try to use it.
If you load an image and then do this:
MyImage1 = MyImage;
MyImage2 = MyImage;
MyImage3 = MyImage;
There are 4 references to the Image in MyImage. If you don't specifically use a method that gives you a new Image, usually, you are getting a refrence to an image already loaded in memory. -
Question about Load Balance SFTP service by using CSS1150X
Does anyone come across of load balancing SFTP service by using CSS1150X? Typically by configuring CSS1150X to load balance FTP service, the configuration will as follow:
content ftp_rule
vip address 192.168.3.6
protocol tcp
port 21
application ftp-control
add service serv1
add service serv2
add service serv3
active
group ftp_group
vip address 192.168.3.6
add service serv1
add service serv2
add service serv3
active
However, for my personal understanding and knowledge, I will configure my CSS1150X as follow to load balance SFTP service:
content sftp_rule
vip address 192.168.3.6
protocol tcp
port 22 //Change 21 to 22
application ftp-control
add service serv1
add service serv2
add service serv3
active
group sftp_group
vip address 192.168.3.6
add service serv1
add service serv2
add service serv3
active
My question is, "application ftp-control" in content "ftp_rule" is still applicable to SFTP or not?I believe application ftp-control would not be used for sftp.
This might cause the session to get dropped when there is no data channel created and cause issues with long connections.
Hope it helps!! -
Question about load external SWF
Hi people!
I've been trying to load an external SWF into my app. I need
to load a Fusion Chart's Gantt Chart, but I didn't achieve.
Fusion Charts are embed using the attached JavaScript code.
How can I load this SWF into my app? Should I use ExternalInterface
to do it?You would need to use SWFLoader, Image or Loader to load your
swf into Flex. To interact with it, you would most likely need to
use SWFLoader/Loader so you could make calls into the SWF. This is
somewhat of an advanced topic and a common question, so you should
be able to find more complete answers if you search the forums for
these. -
Question about Load Average in the AWR report
Hi,
I've some database in 11.2 RAC on AIX.
I was analyzing the root causes of eviction.
Looking AWR Report before the reboot I see:
DB1
Host CPU (CPUs: 6 Cores: 3 Sockets: )
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
4.18 12.33 60.9 12.6 1.6 26.5
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 27.4
% of busy CPU for Instance: 37.3
%DB time waiting for CPU - Resource Mgr: 10.6
DB2
Host CPU (CPUs: 6 Cores: 3 Sockets: )
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
3.77 13.93 60.7 12.5 1.6 26.7
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 6.9
% of busy CPU for Instance: 9.5
%DB time waiting for CPU - Resource Mgr: 0.0
Do you think these value ar high?
This is vmstats at the time of reboot:
DATA
RUN
BCK
AVM
FRE
PRE
PPI
PPO
PFR
PSR
PCY
FIN
FSY
FCS
CUS
CSY
CID
CWA
07/21/2013
00:08:17
31
0
7.400.345
579.923
0
81
0
0
0
0
3.292
187.010
19.560
84
16
0
0
07/21/2013
00:08:17
17
1
7.390.187
589.884
0
176
0
0
0
0
3.681
169.994
21.482
81
19
0
0
07/21/2013
00:08:17
27
1
7.402.121
577.816
0
115
0
0
0
0
3.150
157.210
18.503
84
16
0
0
07/21/2013
00:08:48
19
1
7.422.966
564.179
0
211
0
0
0
0
2.396
152.667
19.368
84
16
0
0
07/21/2013
00:08:48
19
1
7.427.693
559.268
0
162
0
0
0
0
2.990
154.733
19.843
85
15
0
0
07/21/2013
00:08:48
23
1
7.441.204
545.530
0
204
0
0
0
0
2.137
171.501
18.151
84
16
0
0
This is mpstat:
DATA
CPU
MIN
MAJ
MPC
INT
CS
ICS
RQ
MIG
LPA
SYSC
US
SY
WT
ID
PC
07/21/2013
00:08:48
0
12896
44
0
1279
3030
1362
2
367
100
27313
86
14
0
0
0.49
07/21/2013
00:08:48
1
11055
93
0
1123
3137
1315
1
222
100
31860
85
15
0
0
0.51
07/21/2013
00:08:48
2
5938
51
0
1465
3840
1294
2
532
100
29992
85
15
0
0
0.49
07/21/2013
00:08:48
3
6266
57
0
1247
3177
1046
2
511
100
22793
85
15
0
0
0.51
07/21/2013
00:08:48
4
2661
18
0
1729
4087
1707
4
264
100
24647
85
15
0
0
0.49
07/21/2013
00:08:48
5
4211
10
0
1395
2709
1101
2
209
100
21019
86
14
0
0
0.51
07/21/2013
00:08:49
0
9372
27
0
1150
2583
1219
0
245
100
47745
82
18
0
0
0.47
07/21/2013
00:08:49
1
11327
13
0
726
1803
794
1
130
100
25239
87
13
0
0
0.52
07/21/2013
00:08:49
2
8970
118
0
1459
4396
1517
0
602
100
24833
81
19
0
0
0.49
07/21/2013
00:08:49
3
7328
267
0
1329
4136
1273
2
586
100
25385
81
19
0
0
0.51
07/21/2013
00:08:49
4
8793
19
0
1133
2583
1036
1
235
100
24327
86
14
0
0
0.50
07/21/2013
00:08:49
5
8239
12
0
1309
2846
1165
1
277
100
18513
86
14
0
0
0.50
Thank youThank you Jonathan,
i'm looking ASH, 15 minutes before the crash.
I've 13% of buffer busy waits and 13% of cpu quantum
Avg Active
Event Event Class % Event Sessions
CPU + Wait for CPU CPU 59.09 0.15
buffer busy waits Concurrency 13.64 0.04
resmgr:cpu quantum Scheduler 13.64 0.04
The buffer busy waits was caused by an update of a table.
There are ETL jobs that runs every nigth.
Looking IO stats I notice a change in the use of the swap:
before the crash:
hdisk66 xfer: %tm_act bps tps bread bwrtn
1.0 8.2K 2.0 8.2K 0.0
read: rps avgserv minserv maxserv timeouts fails
2.0 6.7 3.8 9.6 0 0
write: wps avgserv minserv maxserv timeouts fails
0.0 0.0 0.0 0.0 0 0
queue: avgtime mintime maxtime avgwqsz avgsqsz sqfull
0.0 0.0 0.0 0.0 0.0 0.0
near the crash:
hdisk66 xfer: %tm_act bps tps bread bwrtn
71.0 241.7K 59.0 241.7K 0.0
read: rps avgserv minserv maxserv timeouts fails
59.0 12.1 0.2 183.5 0 0
write: wps avgserv minserv maxserv timeouts fails
0.0 0.0 0.0 0.0 0 0
queue: avgtime mintime maxtime avgwqsz avgsqsz sqfull
0.0 0.0 0.0 0.0 0.0 0.0 -
Question about loading Premiere CS2
I have Premiere Pro 1.5 on a dying computer with XP operating system. I couldn't get 1.5 reauthorized so Adobe gave me a CS2 download with serial number.. I tried to load CS2 on the newer computer with Microsoft Vista as the operating system. At first it hung on "Error 1311 - Source file not found. Data1.cab." I moved Data1.cab to the directory and then I was able to get past that error. CS2 continued installation until it got to the help files, which didn't load. The rest of the CS2 seemed to load OK.
I then tried to open CS2. It bombs after 3 seconds of the opening page. Any ideas?I don't have a CD of CS2. I downloaded a second copy of CS2 from Adobe and had the same result. However I was repairing the origional CS2 with the second copy. I will uninstall CS2 and try to install the newer copy of CS2 later.
I am wondering... Could it be that CS2 doesn't like Vista? -
Question about load Microsoft JDBC driver for Sql server 2000
Hello,
I have some problem while trying load the sqlserver2000 jdbc driver
My program is a third party application and it works with the other type 4 JDBC driver well. So I tried to use Microsoft SQL server 2000 JDBC driver instead.
I installed JDBC driver and set up the classpath.
My error message is:
"Driver class 'com.microsoft.jdbc.sqlserver.SQLServerDriver' could not be loaded"
Is above message means that my classpath setup correctly but the application could not load the class or the application could not find the jar file which containes the driver class?
By the way, the third party application I was using to load this JDBC driver does not certified to use microsoft JDBC driver. But I don't think it matter?
Thanks for your help
Hui LuHello,
I have some problem while trying load the
sqlserver2000 jdbc driver
My program is a third party application and it works
with the other type 4 JDBC driver well. So I tried to
use Microsoft SQL server 2000 JDBC driver instead.
I installed JDBC driver and set up the classpath.
My error message is:
"Driver class
'com.microsoft.jdbc.sqlserver.SQLServerDriver' could
not be loaded"
That is an unusual message. Presumably you did not see "NoClassDefFoundError". If you see that it means the class could not be found.
Is above message means that my classpath setup
correctly but the application could not load the class
or the application could not find the jar file which
containes the driver class?
By the way, the third party application I was using to
load this JDBC driver does not certified to use
microsoft JDBC driver. But I don't think it matter?
It could. Perhaps the app expects a certain functional level and the driver doesn't support that. And so it bails with the message that you see.
Or it could mean that you have do something special because it has its own class path, and the driver is not in that. -
Question about load balancing between Portal and ABAP
Hi,
I have the problem whit load balancing between Portal and ECC (ERC) ABAP
Exist two system:
1) ECC (ERP) ABAP = Backend Module = HR
2) EP (JAVA) = Frontend
The users (9000 users) logon in the EP and run query (data personal) in the ECC. The problem to all user connect in Central Instance and not in the Dialog Instance.
How can balancing the conecction HTTP (EP) to ECC (ABAP)??
I need balancing in the ECC to Dialog InstanceJco -> right. Another possibility is that you use iviews that point to the backend in this case you will need to use a load balanced entry for the backend system in the [system landscape|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8c1e438d7017fce10000000a42189c/frameset.htm] -> SAP_R3_LoadBalancing
If you have ESS deployed on your portal, you will most probably need to do both.
Cheers Michael -
Question about Load Balancing Wireless connections using WLC- F5- ISE
Hi all,
Can anyone give me some orientation how the radius auth process/handshake between the WLC and ISE changes once the F5 is installed in the middle in order to perform load balancing?
We can do some kind of load balancing by configuring different radius servers on each WLC for which, I must configure the same shared secret in the WLC and ISE so the radius request/accept could be processed.
Now that we have the F5 in the middle, do I need to create/configure the same shared secret in the F5 so radius transactions can be processed by this device?. Based on the following link, I must configure the F5 in the ISE like another NAD device (similar to the WLC) but I do not know if this additional configuration in the ISE includes the Auth parameter to be added in the ISE NAD (F5) configuration.
How to properly use a load balancer in Cisco's Identity Services Engine
http://www.networkworld.com/community/blog/load-balancing-cisco-identity-services-engine
Our sheme is shown next,When you covert the pair into SSO, all the APs will go to the ACTIVE unit. No unit will "live" in the standby unit because this unit will "share" the AP-support license between the two.
This is the first step you need to get sorted. Send an email to [email protected] and give them the exact details of what you want to do (i. e. AP SSO) and then provide the serial number of your nominated active WLC and the serial number of your nominated standby WLC. -
Simple question about loading routine
Hello Gurus,
I will use following routine:
my source includes fields "CURRENCY" , "AMOUNT".
following routine is for target field "0AMOUNT" in DSO.
but when I check this routine, get "The data object "SOURCE_FIELDS" does not have a component called "CURRENCY", why ? how to correct it ?
IF SOURCE_FIELDS-CURRENCY IS INITIAL.
RESULT = 0.
CURRENCY = 'EUR'.
ELSE.
CALL FUNCTION
'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
DATE = sy-date
FOREIGN_AMOUNT =
SOURCE_FIELDS-amount
FOREIGN_CURRENCY =
SOURCE_FIELDS-currency
LOCAL_CURRENCY = 'EUR'
TYPE_OF_RATE = 'M'
IMPORTING
LOCAL_AMOUNT = RESULT
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CURRENCY = 'EUR'.
ELSE.
RESULT = SOURCE_FIELDS-amount.
CURRENCY = SOURCE_FIELDS-currency.
ENDIF.
Many thanks,
Frank ZhangHi Frank,
(1) for 'CONVERT_TO_LOCAL_CURRENCY' function, importing and exporting are different from function definition. but if I reverse them, it doen not work, why?
I don't know the reason if this is what is happening
(2) "LOCAL_AMOUNT = RESULT", means put result of function to LOCAL_AMOUNT, or something else?
I think, Local amount ie amount after conversion to EUR will be put in result.
(3) if I need another statement in the routine to " RESULT = ? ", please complete this question mark for me ? No you would not need another statement.
(4) can I set value for another target object such as 0CURRENCY in this routine for 0AMOUNT.
I think, you could but you may need to use return table for such a case.
Regards,
Sunmit. -
Question about Objects Hierarchy
Hi Guys,
Question :
I am writing an applet let's say Zoo extends JApplet
let's say I have a class Bear that extends Mammal. and Mammal that extends Animal.
Now, I have an ArrayList<animal> cage = new ...
and along the way I am adding Bears to my cage : cage.add(new Bear)...
my question is: how would I write a search loop that returns the Bears from my cage ?
and : how would I write a loop that returns the mammals:
I have tried the following :
for (int k = 0 ; k< cage.size() ; k++) if (cage.get(k) == Mammal) return cage.get(k);
didn't work
also tried :
for (int k = 0 ; k< cage.size() ; k++) if (cage.get(k).getClass == Mammal) return cage.get(k);
and didn't work
any ideas ?
Thanks a lot ... ( and my apologies if my example offends any animal lovers, I am one my self :)You want to return them all, or just the first one you come to?
To make it simple let's suppose you want to return just the first one. And since you're using Java 5 techniques like Generics, let's clean up your code to use the Java 5 enhanced for loop as well:
for (animal one: cage) {
if (one instanceof Mammal) { // This was your question, I think
return one;
}If you have to return them all, then add them to a new List as you find them and return that when you're done going through the cage. -
Question about loading time determination in OVLZ
Hello,
In t-code OVLZ, field "Determine load. time", the F1 explanation is bellow:
-No loading time determination
No loading time is determined
-A Route-dependent
A route-dependent loading time is determined.
Influencing factors are the shipping point, the route, and the loading group
-B Route-independent
A route-independent loading time is determined.
Influencing factors are the shipping point, the route, and the loading group of the material.
can somebody tell me what is the difference between A B? It seems to be the same according to the 2nd line explanation of B.
Thanks,
Gunadihi,
in OVLZ-shipping point- working hours
determine load time: the option A -stands for route dependent
means loading times is determined with combination of shipping point+ route+ loading group
option B- stands for route Independent
Means loading time is determined with comnination of shipping+ loading group
the loading time will have effect on delivery sch ie., taken into account for forward scheduling else backward scheduling
hope this help u
regards,
Arun prasad
Maybe you are looking for
-
Can I see my desktop on Apple TV?
Able to access my library on Apple TV for photos and music. Wanted to play a DVD and watch it on the larger TV. Thought I could do that with Apple TV (wirelessly, without HDMI cables). Please advise...
-
i am trying to download ios 7 but it keeps on say estimating time and it has been doing this for over a hour what do i do?
-
Depot Import Procurement !!
Hi Depot ( A Trading House) procures material from foreign vendor. What is the process of depot import procurement? What should be the FV11 conditions for the material? What should be the material and chapter ID combination in J1ID? Tax Pro
-
My 4s dead or should I keep trying error -2001
Hello Friends Well my wife has done it again for the 3rd and probably last time she has dropped her iphone 4s into water submerging the entire phone. This time around the rice and drying packets did not work. I followed a number of other non-invasiv
-
No response to hacked account report
Hello, I've had to create a new Skype account in order to post on this forum. My old account has been very seriously hacked. The hacker has managed to change my password and login email, set up auto-recharge to the linked Paypal account and steal lar