Question about Sender and Receiver Structure for JDBC

Dear All,
I want to know why there is a fixed format for sender and receiver structure for JDBC. why cant we use the structure like what we want? explain me in detail.
Thanks

Good Question:
We have to create our data structure based on the existing database table structure. While reading or writing , JDBC adapter convert our data type structure in to SQL Query Statements that matches Table structure.

Similar Messages

Problem with Stored Procedure exection in Sender and Receiver side of JDBC

Hi All,
I am facing problem while executing Stored Procedures using sender and receiver sides of JDBC adapter.
Here is my SP in Oracle DB :
PROCEDURE EMP
( ID IN VARCHAR2,NAME IN VARCHAR2,PROCESSED IN VARCHAR2 ) AS
BEGIN
   INSERT INTO EMPLOYEE VALUES (ID, NAME, PROCESSED);COMMIT;END EMP;
Now I want to execute this SP using sender JDBC channel and receiver JDBC channel.
Can anyone please help me executing this SP?
Regards,
Soorya

Hi Soorya,
The receiver Data type should be like this:
<StatementName>
<storedProcedureName action=u201D EXECUTEu201D>
    <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName>
Check the link http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
Which DB are you using?? The sender structure will be like
<resultset>
<row>
<field1></field1>
<field2></field2>
<field3></ field3>
</row>
</resultset>
Search SDN you will get lot of examples
Regards
Suraj

Unable to send and receive email for external domain

Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server.
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server: localhost
Address: ::1
Non-authoritative answer:
Name:    www.google.com
Addresses: 2404:6800:4009:802::1014
          74.125.236.145
          74.125.236.148
          74.125.236.146
          74.125.236.144
          74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server: localhost
Address: ::1
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!

Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks

I need send and receive emails for edge server 2010

i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.

Hello,
I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
on Hub transport server.
Please uncheck "anonymous users" on receive connector for Hub server.
Please follow the ExchangeITPro's suggestion to check DNS MX record.
Cara Chen
TechNet Community Support

Is there a free app for sending and receiving pics for ipod touch

My friend just received an ipod touch. Looking for a free app for him to use to send and receive pics. Can you help me with this? We are dummies when it comes to technical things, so please keep it simple for me! lol

there is no official app for sharing pics with i device to i device but there is a rumour that you can do it from an app called ibluenova.

Send and Receive script for Outlook 2011 not working

I used to have a script to send and receive mail in Entourage. When I change the script to:
tell application "Microsoft Outlook"
connect to every pop account
connect to every imap account
send
end tell
It hangs at the second line and I am not able to fix it, anybody know how to do this?

I don't have any accounts in Outlook to test, so this is a bit of a long shot, but could it be that you want something as simple as the following? I assume this is part of something bigger, as cmd-k will do the same thing.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
tell application "Microsoft Outlook"
send and receive all
end tell </pre>

Send and receive emails for iMessage and FaceTime

Hi everyone! I'm in a tough situation. On iMessage and FaceTime, I want to use a different send and receive email but it says next to the one I type in
Error: unable to verify email because it is already in use..... And it still has a check next to the email I don't want. Can someone plz reply
Soon!! HELP

iOS: FaceTime is 'Unable to verify email because it is in use'

Email delivery failed. unable to send and receive email for da device 9780 bold

Hellow, I m using
BlackBerry® 9780
smartphone (3G, Wi-Fi)
6.0 Bundle 863 (v6.0.0.285, Platform 6.5.0.54)
3G Bands 1,2,5,6
Cryptographic Kernel v3.8.6.5
Branding Version: 1.0.99.538J
Micro Edition Configuration: CLDC-1.1
Micro Edition Profile: MIDP-2.1
Micro Edition JTWI Version: 1.0
Micro Edition Media Version: 1.1
Micro Edition PIM Version: 1.0
Micro Edition File Version: 1.0
Micro Edition Bluetooth Version: 1.1
Micro Edition Location Version: 1.0.1
Micro Edition Security and Trust Services (APDU) Version: 1.0
WLAN Version: 4.2.1.40
www.blackberry.com
Now the problem is I have my email {REMOVED} associated with this device. But I m unable to send receive the email
There is an error I get like delivery faliure please resolve meh and assist me
Mod Edit: Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
divyaan wrote:
There is an error I get like delivery faliure please resolve meh and assist me
Sadly, from "like", we can't really understand the error message you are receiving...exact and complete content of any errors presented are always better to help us understand rather than vague hints and such.
In any event, I recommend this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Stop Sending and Receiving Emails for the employee which is no longer exist

Exchange 2007
Hi There,
I have lot's of mailboxes in my exchange server which their users are not with us anymore.
I would like to stop receiving any emails for them.
I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
information.
Any idea how to:
Stop sending / Receiving email for these type of users?
OR
Changing the respond message?
Thank you in Advance for your time

You have a couple options. Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers.
This would prevent any information regarding you Exchange servers being returned.
If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox. Refer to this article on creating a DSN:
http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx

About sender and reciever structures

hi friends ,
warm wishes......
i am having in source side three fields like name , city , pincode ....and at target side also the same fields are present ........but i want the text file from reciever system with only pincode+ cityname , without changing the reciever structures .
its very urgent...
thanks in advance.

JP,
I dont understand your requirement.
You source is having name , city , pincode.
In your target you need only pincode+ cityname. If you dont want name then it is not possible to create the file with this two fields pincode and cityname. You have to create a new structure for it. If you use the same structure then you will have problem in your receiver content conversion.
Is this what you are looking for?
---Satish

Question about voice and data plan for Europe

I am in New York and my boss is going to France for a week and a half. He told me he will not have access to the internet there. He asked me to find out if it would be possible to get a voice and data plan for the month that he will be there, and if so, could someone show me where I could look at the different plans available?
If it's not possible to do that for just a month, then could someone tell me where I could find the rates are for voice and data in France?
Thanks

Hi kevindrosario,
I appreciate your interest in our International Services. France, is a GSM country and will only support a Global capable device. Unfortunately, its not clear if your boss has a Global capable device. If so, here are the details for the voice and data rates for France.
If your boss doesn't not have a Global capable device, no worries! We offer an Occasional Global Traveler program, in which we will loan you a Global device for up to 21 days. I hope this information is helpful. Please let me know if you have any any additional questions or concerns.
Thank you,

A few questions about Memory and Power Supply for MSI 975X Platinum Powerup Edit

Bought this Motherboard: MSI 975X Platinum Powerup Edition
975X Platinum V.2(7246-020)
I have a P4 CPU HT in it with 2 512mb sticks of DDR2 memory (533mhz).
I am upgrading to a Core 2 Duo 6600 CPU which has a 1066mhz FSB
What memory speed should I purchase to achieve the fastest bus speed without overclocking???
I get confused as my current memory is 533 which I guess on a Pentium 4 with HT cuts the FSB speed in 1/2 to 266mhz.
Any recommendations?
Do I need to buy Dual Channel or can I just buy 2 sticks?
Thank you
Peter

Quote from: /dot on 07-February-07, 15:46:41
Great info again guys!
I'll stay away from OCZ (I read it's more for overclockers).
@DryHeat:
I watched your sig, great setup! I'm planning for about the same setup (MSI 975x PUE, P180, C2D, ...). But will try a Scythe Ninja for CPU cooler and use an MSI graphic card (maybe 2 cards for 4 monitors in total).
Is your setup silent or just quiet? Makes a big difference for me.
What would you change now? And what is the most noisy component?
Sorry for all the questions but I'm not an expert and by budget does not permit me from making any mistakes.
The case fans create the most noise. When they are all on "low" I an hardly hear them and have to shake the mouse to see if it's on, but on medium it sounds like a "standard" computer. Not terrible, but not quite. On high they are down-right loud.

Transport the sender and Receiver Structures of Retraction

Hi,
I would like to transport the sender structure which has been created in UPB_STRUCT and UPB_RULE.
COuld some one tell me how to transport these objects.Points will be assigned.
Thanks,
Subha

Hi,
When u open UPB_RULE screen, first tab u can see Rules -> Transport which prompts for transport request. Same is the case with UPB_STRUCT, sender structure -> transport
Bindu

How to correctly configure send and receive connectors for SBS2011 exchange to connect to EOP

Hello SBS fans,
we have a customer with SBS2011 and exchange. The server email is setup for Exchange Online Protection.
It passes the Remote Connectivity Analyzer for inbound and outbound email. It shows a warning for the spf, saying it cannot find the spf record, BUT MXtool box passes everything associated with their domain name, including the spf record.
They are now getting some bounced email from yahoo servers, referencing this ip
65.55.169.249, which is a valid Microsoft ip.
I checked the bounce back email header carefully, and found a reference to an internal ip, 192.168.11.14, which just happens to be the ip of the user's desk PC!! - NOT the local addr of the sbs2011 server (which should not be there anyway)
I will guess that there is an incorrect setting in one or both of the hub transports? There is a correct smart host connector.
I am no longer sure about the other connectors!
Any ideas on this?
ewholz
Network and Server Installs

Hi,
à
It shows a warning for the spf, saying it cannot find the spf record
Would you please let me know the complete warning message that you can get? Meanwhile, would you please let
me know how long ago you add the SPF record? Be
more than 72 hours?
Please also refer to following article and check if can help you.
Configuring
Exchange 2007 Hub Transport role to receive Internet mail
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Question about Java and XML rendering for Word 97 upwards.

Without using the apache POI library, and by sticking to non-pay products,
is it possible to use java or XSLT/XML to turn
an xml formatted file into a
Microsoft Word/Excell/PDF file within one framework?

Look into Apache FOP. But be warned: it will most likely use POI to do any excel conversions. That's how (sane) software development works: you don't reinvent the wheel, you effectively reuse what is already there.

Question about Sender and Receiver Structure for JDBC

Similar Messages

Maybe you are looking for