Question about the import process in UC&CU upgrade

Hi,
We have are doing an UC&CU upgrade ( 4.7 => ERP6 ehp4)
We have export the database (unicode converssion) and we are in the step where it's the import.
I would to kno what i have to do in this SAPinst step :
Database Schema Database objects have been found in the database schema (dv1 in DV1) used for this installation.You must delete these objects, or use another database or SAP SID as entered in the previous dialogs.
and there is check box : Delete existing database objects.
I would like to be sure about this option.
I supose i have to valid this option if someone could confirm this point.

If you do a Unicode conversion (no matter in a UC & CU scenario or as a single project) the target system must be empty - means, you will create a new database and load it with the content you exported.
You can't install the export into your already existing database with the same name.
Markus

Similar Messages

A question about the Installation process in general

Hey guys, a general question to the installation process.
The following scenario:
I install a programme on my macbook pro and don't tick all possible installation options (like additional content).
Afterwards I change my mind and want to install the optional content.
So I run the installation programme again and now the question:
If I install the additional content AND the mainprogramme again is the main programme going to be overwritten or am I going to have the mainprogramme twice on my system from now on
Thanks in advance for you help, folks!

If you do a Unicode conversion (no matter in a UC & CU scenario or as a single project) the target system must be empty - means, you will create a new database and load it with the content you exported.
You can't install the export into your already existing database with the same name.
Markus

HCM Processes & Forms - Some questions about the PD Processes

Hi Experts,
At my Organisation we use HCM Processes and Forms and Organisation Management and MSS to manage Position Based Security (PBS).
The MSS Managers have requested a form be developed which they can use to extend an existing Position to Employee temporary assignment (IT1001 S-P with A081 relationship) which is due to expire within the next 30 days. We recently upgraded to ECC EHP6 and I thought I would now have a go at developing this Form.
While researching in SCN and SAP Press books on the ‘HCM Processes and Forms’ topic, I have discovered a lot of information that has assisted me so far in progressing this solution.
There are a few givens that I have confirmed so far, which are as follows;
Since we are using Positions (Organisation Management), the only option available here is to use the PD Process, which implies using the SAP_PD Back_End Service. Therefore this become the baseline to build upon.
While researching in SCN and SAP Press books on this subject I could not find relevant information about what is possible using the SAP_PD Service to achieve my solution design for the above requirements and thus my post to the HCM P&F Community for assistance.
My questions are as follows;
In the solution design, I was considering to use the “Process without Start Object” or “Mass Start” to skip Step 1 - “Selection Object” and use a Generic Service to get all the positions for the Manager (along the lines of the SAP Standard Generic Service - find Positions in Manager’s area of Responsibility) and only retain the Positions where the End Date for the IT1001 A081 relationship in between the Effective Date and Effective Date plus 30 days. This should provide me with all the positions under the Manager that have the A081 relationship with the assigned employee that are about to expire within the next 30 days.
I want the result presented on the Form in a Table format so that the Manager has to enter the Extension Start Date and End Date for the new assignment period.
Is this possible using Standard Design Time functionality?
2.      Or Instead of Question 1, could I use OADP to achieve the same result using a custom search class to return a list of multiple objects (Positions)which is used to populate the form?
3.       I get the impression that the ‘Mass Start’ process is mainly for multiple employees. Can it also be used for multiple PD objects?
4.       I get the impression that if I used the ‘Mass Start’ option I could only use this if I was CREATING a new object or assignment? (I take it that you cannot use the Mass Start option to CHANGE multiple existing objects. Only because I have not seen any SAP Standard examples of this yet!)   Please confirm if this is possible?
5.       Has anyone used the “Query for Mass Start” option on a Process? How does that work? (Could I write a ‘SAP Query’ to get the positions I am interested in under the Manager?) Is there a sample SAP Standard process that uses a query?
Your assistance would be greatly appreciated.
Thanks in Advance.
Regards,
Steve

no limit
no limit
limitations of what?
you can use forms on mac, pc, and other systems

Questions about the load processing of OpenSparc T1 Dcache

Hi,
I have some questions about OpenSparc T1 Dcache load processing.
During load processing, subsequent loads to the same address need to search the store buffer for a valid store to that address. If there is a CAM hit, data is sourced from the store buffer, not from the D-cache, and no load request will be sent to the L2.
What if there is no CAM hit. Would the load request be sent to L2? Or would Dcache be checked for the requested data?
If the load request would be sent to L2, what next? Would the Dcache be updated?
Thanks

Store buffer is checked for Read after Write (RAW) condition on loads. If there is full RAW - i.e. full data exists in the store buffer - then the data is bypassed and no D cache access happens.
If RAW is partial (e.g. word store followed by a double word load) then load is treated as a miss. Store is allowed to complete in L2 cache and then load instruction is completed.
For the miss in STB, D cache is accessed. If hit, data is fetched from D$. If miss, data is fetched from L2$ and allocated in D$.

Question about the Signal Processing Toolkit

I am using Measurement Studio with Visual C++ 6. Is it possible to use the
Signal Processing Toolkit in this environment or does LabWindowsCVI have to
be used? Would the toolkit supply a lib/dll that could be linked into a
VC++ project and called directly from the program?
Thanks

You can use the signal processing toolkit libraries in VC++, but the libraries do depend on CVI libraries. The easiest way to create a Visual C++ project that links to the CVI libraries would be to either a.) create the project in CVI then convert it using the Measurement Studio CVI conversion wizard, or b.) create a Visual C++ project that uses the CVI libraries with teh Measurement Studio application wizard.
For more information on the conversion wizard, see the following topic in the Measurement Studio references:
(Measurement Studio for Visual C++ 6)
Visual C++ Help\Tutorials\Getting Started\Measurement Studio for Visual C++ 6.0\Converting LabWindows/CVI Projects to Measurement Studio for Visual C++ Projects
(Measurement Studio for Visual C++ .NET)
Visual C++ Help\Tutorials\Getting Started\Measurement Studio 6.0 for Visual C++ .NET\Working with LabWindows/CVI Projects in Visual C++
- Elton

A simple question about the Integration process and the PI system

Hi all
Out PI system gets more and more slowly .
in the Monitor I can se that there are many ufinished IP about 100.
in the Outbound colon there is a Watch icon with the message
QMessage being sent
and in the graphic of the IP thers is a Send Message Asynchronously with text in process.
my question is can those unfineshed IP be guilty in slowing down the system by taking resources, they have been there for quit a long time .
Thanks

Hi again
I have checked sm12 , no locks
theres is no mapping involved in this step , the IP is trying to send a file to server.
I just want to know if 100 unfinished IP slow down the system .
It does not matter if the file has been sent or not
is there any way to check those IP if they are taking resources.
Thanks.

Basic Questions on the Syncing Process

I have a couple of questions about the syncing process.
First - does the syncing take place through MobileMe and the so called “cloud” or does it take place through the physical connection of the Touch to the iMac via the USB cable? When I connect the Touch to the iMac, I have
sync Address Book contacts
and
sync iCal calendars checked in iTunes
and there’s a little message in the same iTunes window under Bookmarks which tells me that the bookmarks are being synced over the air via MobileMe. So is the following assumption correct on my part that
Address Book
iCal
are being synced via the physical USB connection while the Bookmarks are being synced over the WiFi connection?
And finally, if I have contacts - let’s call them 1, 2, 3, 4, 5 on the Touch and only 1, 2, 3 on the iMac
what happens with the syncing process? Do the contacts on the Touch get reduced to 1, 2, 3 or do those on the iMac expand to 1, 2, 3, 4, 5 ? The question I guess is what syncs to what? Do changes on the iMac transfer over to the Touch during syncing or does it work the other way too?
Thanks
John
Thanks
John

1) If you have it to sync via Mobileme, then it sync via Mobileme. If you do not, then it does not.
2) It syncs both ways.
http://manuals.info.apple.com/enUS/iPod_touch_3.0_UserGuide.pdf

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

HT4527 I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process. I have iTunes 11.0.1.12 on both computers so the help screenshots do not help a

I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process. I have iTunes 11.0.1.12 on both computers so the help screenshots do not help as such

Then stop trying to use HomeShare and use one of the other options listed in the document from which your question was posted.

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

Question about sql batch process in java app

hi all
i have few questions about using batch process in the java.sql package. the addBatch method can take sql statements like inserts or updates. can we use a mixture of insert and update then? can we use prepared statement for this? it's just for performance consideration. thanks in advance.

hi all
i have few questions about using batch process in the
java.sql package. the addBatch method can take sql
statements like inserts or updates. addBatch() is a method that has no parameters. It doesn't 'add' sql statements.
can we use a
mixture of insert and update then? can we use
prepared statement for this? it's just for
performance consideration. thanks in advance.The point of batching is that you take something that is invariant and then 'add' a variant part.
Thus a single insert has an invariant part (the table and specific columns) and a variant part (the data for each row by column.)
You can use anything that is valid SQL (for jdbc, driver, database) and use it presuming your database allows that particular usage in batching. But that does require some regular pattern - it won't work if your usage is random. Nor will it work if some statements need to be executed only some of the time. Finally also note that transaction processing will often require smaller chunks - you can't insert a million rows in one batch.

Short question about the nano controls

Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!

The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens.

Add the ability to manipulate image data early during the import process

Following many discussions about the inability to cleanly support aspect ratio in LR, it would be useful to have the ability to interviene in the import process (early) and manipulate the exif data. It is possible to attach a metadata preset during import but presets do not give the ability to change the aspect ratio and cropping tags.
This feature could have many other uses such as allowing more complex naming schemes, copy location, etc.

Perhaps your post would be better received in the Lightroom forum? (this is the SDK forum).
Or perhaps better still, the feedback forum: http://feedback.photoshop.com/photoshop_family/topics/import_actionshttp://feedback.photoshop.com/photoshop_family/topics/new
SDK-wise: one can easily intervene via plugin and apply whatever transformations pre-import that one could think of...
Rob

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Question about the import process in UC&CU upgrade

Similar Messages

Maybe you are looking for