Question about the size af:inputText

can <af:inputText> grow itself automatically to avoid scrollbar?
if user types a long text into it, the inputtext area will become bigger to fit it to avoid scrollbar. is this possible?
another question is,i found the size of this input area are controlled by 'rows' and 'columns'.
can i make the inputtext area stretch to 100% width of the page?
i cannot use 'columns' to accomplish this, since the page resolution is different for users. it works on 1440x900,but fails on others.
thanks a lot
-Ken

cowbell bill wrote:
Still stumped, I've deleted all unused audio files, deleted all unused midi. Maybe a third of the project. I see nothing in the trash, Project size is still the same 3.25 GB. Bypassed all reverbs, And audio CPU level still maxing out in the red. What am I doing wrong. Thanks Bill
When you speak about project size, do you mean the size of the project file itself? Or of the entire project folder?
When you delete tracks or plugins from your project, you won't see anything in the trash, that is normal. Only when you delete an audio file from your disk +from within Logic+ you'll find that audio file in the trash.

Similar Messages

Beginner question about the size of the documents and fonts

I have worked with dps a couple of years now and now that Adobe removes Single Edition I have to look at other tools. EPUB3 fixed layout appears to be an alternative solution.
I've been reading up on the web and checked on Lynda courses, but there is one thing I wonder about.
How should I think about the size of the InDesign document and the size of the body text when I create a EPUB3 with fixed-layout?
Regards
Ake

A couple things to keep in mind with EPUB3 Fixed Layout:
Unlike EPUB reflowable, FXL doesn't change size. You'll need to optimize your InDesign layout for the device most likely to view it—for example, an iPad, since it's the dominant device.
Like with DPS, you'll need to pick a font size larger than you'd use for print.
As with DPS, it's very important to do some tests on your target device to optimize both dimensions and font size.
Final Note: If you're in North America, this is a good time to buy an iPad since there are a lot of Black Friday sales coming up!

Question about the size of my project

3.25 GB 20 or so tracks. a few plugins each a few software drums and synths. I getting overload warnings here and there. Not the I/O level the audio level. I look at the fear lilly Allen demo which has 50 tracks all sorts of plugins and a vid. 1.45 GB. I selected and deleted unused in audio bin and still the same. What am I missing. Logic Pro, IMAC 3.06 core 2 Duo 4 GB ram. Thanks Bill

cowbell bill wrote:
Still stumped, I've deleted all unused audio files, deleted all unused midi. Maybe a third of the project. I see nothing in the trash, Project size is still the same 3.25 GB. Bypassed all reverbs, And audio CPU level still maxing out in the red. What am I doing wrong. Thanks Bill
When you speak about project size, do you mean the size of the project file itself? Or of the entire project folder?
When you delete tracks or plugins from your project, you won't see anything in the trash, that is normal. Only when you delete an audio file from your disk +from within Logic+ you'll find that audio file in the trash.

Questions about the size of x-fi ca

I recently orderd a dell d/dock for my laptop and I am aware that it is possible to plug in an x-fi xtreame music card into its PCI slot, but I was wondering if the x-fi platinum is the same size as the xtreame music version? and also if it works properly without the I/O bay plugged in, since there would be no room for that in the d/dock.
thanks for your help.

Yes the Xtreme Music and Platinum use the exact same PCB. The difference is tha dri've bay, which doesn't affect functionality of the card if connected or not.

Question about the new Yoga 10 HD+

Hi
A few questions about the new Yoga 10 HD+ which I hope you can answer.
I bought the old model last year. Loved the design and long battery time but a few major issues made me return it.
Somewhere I read that it can't read NTFS over USB so I presume that's the same with an NTFS formatted microSD card?
Can it read exFAT formatted microSD cards?
Anyone observed issues regarding audio over bluetooth?
(I know BT isn't exactly High End HiFi but the old Yoga 10 for some odd reason - most likely a driver issue which nobody cared to fix - sounded *much* worse with quite noticeably distortion while both my phone and a cheap noname tablet I have zero fidelity issues - no matter which of my bluetooth audio devices I tried aptX or not)
So to avoid buying this only to return it too I really would like to see if I can have my questions answered before buying it.
While I love the form factor and long running time the above issues are just two mayor dealbreakers to me. Bad audio quality = no joy listening to spotify, local MP3s etc. No NTFS or exFAT = no large movies.
My old noname android tablet really could use an upgrade so I'm really curious whether this can be it or I should look at the competition and sacrify form factor and battery runtime.
Thanks in advance.
EDIT:
If it's not supporting either NTFS or exFAT on the microSD have anyone tried ext3 and/or ext4?
I mean with Androids Linux roots it should be a nobrainer to support at least when it comes to royalties unlike NTFS or exFAT where there *might* be some issues with Microsoft.
Solved!
Go to Solution.

Thanks!
OK. Seems I should just stay clear of this and look elsewhere
Sony for sure I know support exFAT. I'm usure about Samsung. Odd it seems so hard to find out. File sizes of +4 GB should be taken for granted - it's not 199x anymore...
Oh well. Wonder whether to just go for one from the competition or perhaps just save the money and wait until 64 bit catches on. Rumors is that the next Nexus 8 will be 64 bit... (I really don't expect an answer on this)

Question about the animated Pen tool

Hi,
ive a question about the animated pen-tool.
i draw a word, but my hand isnt very calm, so the result is what you see on the screenshot.
Is there a possibility to reduce the points on the animated pen tool like in illustrator?
i know in illustrator its possible, but i didnt found anything in after effects to do it.
thanks for your help

If you are using the Paint tools those options don't exist in After Effects. The only work around is to set a keyframe for the brush path, copy the keyframe, then go to Illustrator and in a blank document the same size as your layer paste. Once in Illustrator you can simplify the path, select it, copy it, then go back to After Effects and select the same keyframe then paste. If you get a mask instead of a new path delete the mask path, make sure you have only the original brush path keyframe selected, then go to Edit>Paste from the menu.
It doesn't look like you're drawing a mask path. That might be a better way to go.

3 questions about texture sizes

Hi there all,
I have 3 questions about texture sizes. First off, after
doing a search in this forum, I found out how to find the maxium
texture size my hardware can handle. However, this is only
currently tells me what the texture size I should use for my
computer. So basically, what my first question is, I wanted to know
what would be the average texture size for PC's. Why I ask this is
because arfter doing the command that finds my maxium texture size
that my computer can handle, it says that I can handle up to
2048x2048, but this doesn't help if lets say the standard hardware
texture size is 1024x1024.
My second question is, when you speak in maxium hardware
texture size terms, is this for per object, per scene that is
loaded into memory, or for the entire game?
... and my last question is, does hardware texture size also
include basic shaders as well (meaning with no textures)? If not is
there a limit on that as well?

1. If you know what maximum texturesize the endusers
graficcard can handle, you can build a switch to different *.w3d
files with that are saved with different texturesizes. you can see
how the hardware variates:
http://nuttybar.drama.uga.edu/pipermail/dir3d-l/2005-September/009554.html
but don't forget that the macs are limited at the moment to a
maximum texturesize of 512x512. If the textures are bigger then the
maximum texturesize they are scaled down to it. In your example a
texture that is 2048x2048 would be scaled down to 1048x1048 if this
is the maximum texturesize of the endusers machine.
2. The maximum texturesize is per Texture. But the Textures
are stored uncompressed in the VRAM of the graficcard. There is no
way to check how much RAM is left and i am not sure what happens if
you put a lot of data in it.
3. A shader only layers textures like photoshop and renderes
them depending on the settings of the shader. The maximum hardware
texture size only limits the size of the texture, if you use no
textures in the shader (setting all texturelayers to void) the
model will be only rendered depending on the values that are given
by "ambient", "emissive", "diffuse", "specular"
Just want to add here that textures should be in this sizes:
1x1, 2x2, 4x4, 8x8, 16x16, 32x32, 64x64, 128x128, 256x256,
512x512, 1024x1024, 2048x2048, 4096x4096 ...
but can be also be combined like this:
32x1024 or 512x256 and so on. this is just good to know.
If textures do not fit into this grid of pixel values, the
texture will be scaled up or down to the next size that is closest
to it.
if you type this code into the message window and execute
every line, you can check the resulting texturesize.
global pImage
pImage=image(100, 1000, 24)
member("world").newtexture("image", #fromimageobject, pImage)
put member("world").texture("image").width
-- 128
put member("world").texture("image").height
-- 1024
This will happen to all textures if they enter the
graficcard.

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

About the size of the font in DVB subtitle

I want to change the size of font in DVB subtitle but I can't find any description about it
How will i do

Hello!
I'm interested if you've found the answers for your questions about subtitle sizes. Because I'm starting to work on this theme and trying to find material, but not so successful.
Thank you.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Question about the size af:inputText

Similar Messages

Maybe you are looking for