Question about using blending modes when cloning

Hi I want to clone on a blank layer above the background layer. I have the tool set to curent and below and the blank layer is set to normal blending mode. I want the cloning to be in darken blending mode. I change the blending mode of the clone stamp tool to darken. Will that work on a blank layer that is set to normal or is it necessary to also change the blending mode for the blank layer to darken as well? Thanks for your help.

Well thanks. It's not just a portion of the image that I want to clone on using different blend modes, but the entire image. I didn't want to duplicate the background to clone on as it adds a lot in size to the image and its harder to edit out incase I make a mistake. Guess I will have to have two layers, one set to lighten and one to darken. I wish that Adobe would make photoshop work in the next version so that you could just change the blending mode of the clone stamp tool in the tool bar. Wasn't it like this in versions before CS5?
So I have another question for you. Can I use the healing brush on lighten and darken blending modes on a blank layer set to normal with sample current and below selected? Or do I have to switch between two separate layers, one set to lighten, one set to darken?
Thanks again.

Similar Messages

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Question about the CSS behavior when using layer 3 sticky and sticky table

Hi everyone,
I have a question about the CSS behavior when using layer 3 sticky and sticky table is full.
If I configure layer 3 sticky and specify the inactivity timeout as below, how does the CSS
handle subsequent needed sticky requests ?
advanced-balance sticky-srcip
sticky-inact-timeout 30
CSS document says that
Note:
If you use the sticky-inact-timeout command to specify the inactivity timeout
period on a sticky connection, when the sticky table becomes full and none of
the entries have expired from the sticky table, the CSS rejects subsequent
needed sticky requests.
My question is what is the next reaction by doing the CSS if the CSS is in the
following condition:
when the sticky table becomes full and none of the entries have expired from
the sticky table, the CSS rejects subsequent needed sticky requests
Does CSS just rejects/drops subsequent needed sticky requests ?
or
Does CSS does not stick subsequence requests to particular service but CSS forward
subsequence requests with round-robin basis ? which means if the sticky table is full,
the CSS just works round-robin load balancing fashion for subsequence requests ?
Your information would be appreciated.
Best regards,

Hello,
There is a good document explaining this on Cisco web site
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_tech_note09186a0080094b4b.shtml
It depends if the sticky-inact-timeout is used or not. If not, it's FIFO (the oldest entry in the sticky table is removed). If yes, the CSS will reject the next sticky request.
Rgds,
Gaetan
Rgds
Gaetan

I have a question about extracting pages. When I do the function, adobe saves the individual files as " file name space page number ", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I a

I have a question about extracting pages. When I do the function, adobe saves the individual files as "<file name><space><page number>", so the files look like this "filename 1.pdf", "filename 2.pdf", "filename 3.pdf". Without too many gory details, I am using excel to concatenate some data to dynamically build a hyperlink to these extraced files. It casues me problems, however, for the space to be the the file name. Is there any way to change the default behavoir of this function to perhaps use a dash or underscore instead of a space?

No, you can't change the default naming scheme. You can do it yourself if you extract the pages using a script instead of using the built-in command.

Question about using iMac 2011 as a monitor

hi ,, i have imac 2011 21'5
can i use as a monitor to play xbox 360 on it using mini displayport to hdmi cable ??
if no then is there way else i can play xbox on my imac screen

Frank:
Thanks so much for responding! One question about your post. When you say that the Mac Mini cannot boot in OS 9, does that mean that if I wanted it to hold Filemaker Pro 4 files (which runs on OS 9), that it cannot do this? We would not be running Filemaker on the Mini, just storing the files. We would run Filemaker off of our desktop computers. Sorry, I don't know a ton about computers, so sometimes I need clarification about the terms that people use.-Rob

Question about using new battery in old Powerbook

I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
Current bad Battery Information below:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 1144
Remaining Capacity (mAh): 1115
Amperage (mA): 0
Voltage (mV): 12387
Cycle Count: 281
thanks folks, Shereen

Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
Message was edited by: eww

I have a question about using adobe CS files in CS6 edition

I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

donrulz,
Are your Edit>Color Settings the same?
Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

Question about using mac mini as a server

I run a small non-profit agency. Our server (A Mac G4 from about 4 years ago) recently died a somewhat painful death, and we need to get a new one. We're trying to be thrifty, but i don't want to get something that won't meet our needs. Our server needs are very basic. No more than 8 people will ever access the server at the same time, and generally it will be 2-4 people at once. We keep Word and Excel docs on it (It used to host our database, but we will have a separate server for our new database). Do you think a Mac Mini with the following specs would meet our needs:
80 GB Hard Drive
1 GB RAM
1.42 GHz PowerPC G4

Frank:
Thanks so much for responding! One question about your post. When you say that the Mac Mini cannot boot in OS 9, does that mean that if I wanted it to hold Filemaker Pro 4 files (which runs on OS 9), that it cannot do this? We would not be running Filemaker on the Mini, just storing the files. We would run Filemaker off of our desktop computers. Sorry, I don't know a ton about computers, so sometimes I need clarification about the terms that people use.-Rob

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC

Question about using TVARV in an ABAP program

Hello gurus, Im sorry about the silly question.
I have a question about using TVARV in an ABAP program.
A program is presenting a problem and I think that in this code:
SELECT SIGN OPTI LOW HIGH
FROM TVARV
INTO TABLE R_1_163431035_VELOCIDADE
WHERE NAME = '1_163431035_VELOCIDADE'
AND    TYPE = 'S'.
IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
      ZOPERADORAS-OPERADORA = 'ABCD' AND
      ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
ELSE.
ENDIF.
What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
I am new to ABAP programming, but I have a lot of XP in other programming languages and this makes no sense to me.
Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
If this is a bad way to program, what would be the best way?
Regards
Ronaldo.

Hi Ronaldo,
But in this case, the range is not empty, there are 17 records, in this way.:
For the column "SING" all values are "E"
It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
Not silly ;-). Yes they work differently.
More info here:
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
BR
Sandra

Question about using Macbook in Vietnam.

I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

You may need a plug adaptor, but you don't need a power converter.
(43828)

Using blending modes

I bring 2 images and stack them as layers. Then I use blending modes (lighten, screen, overlay, etc..) to make one image. If I want to paint back part of the image I lost during blending via mask, normal brush does not work anymore. I even tried to change normanl brush into whatever blend I was using at the time with no joy. Help

If you want to reveal part of the underlying layer, add a layer mask to the top layer, paint with Black into the mask in those areas your want to reveal the lower layer.
You can add a layer mask from the bottom of the Layers panel (third from left fifth from right on my copy of CC)

Where Would be the best category to ask a question about using dashboard?

Where Would be the best category to ask a question about using dashboard?

However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

Question about Using PAPI Web Service in PowerBuilder 9

Hi, all.
I Have a simple question about using papiws in power builder 9.
In pb9, I created a new Web Service Proxy Wizard and I input a url for papiws(ex. http://seraphpernote:7001/papiws/PapiWebService) and click next.
But I couldn't get any Service List.
In Eclipse, I used this url for using papiws well.
Does anybody know about this case??
help me plz.

IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

Question about using 10g/11g and APEX ...

Hi,
I just recently learned of Oracle's APEX and have a few questions about using it.
Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
Are all of these free to use?

You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
Your specific questions:
1) Apex is a package that can be installed into any properly licensed database.
2) The price for the production license of the database varies by edition.
The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

Question about using blending modes when cloning

Similar Messages

Maybe you are looking for