Questions concerning XMP

So we are using a new DAM here in the office to facilitate image manipulation. We're working right now on our PoC phase and have been uploading images with all manner of XMP data included to verify the solution's ability to handle it.I noticed two things that have struck me as odd and I was wondering if anyone could help me out.
The metadata field titles in the DAM do not correspond with what is shown in Adobe Bridge. For example, in Bridge (CS 4) there are a number of fields for author information; Creator: Job Title, Creator: Address, Creator: Phone(s), etc. In the DAM these are listed as Author's . . ., such as Author's Position. None of the Creator's information is populated in the corresponding Author's fields, save for Job Title/Position, which populates just fine.
Is this an issue with different XMP schemas, the inconsistency in field titles and the fact that all the information is not being carried over into the DAM.
Also, a co-worker is using Microsoft Expression and none of the XMP data is crossing over. I have no problem with certain fields, like Location, State, etc.My co-worker's files do not carry even that information over. She created a sidecar file using the 'Extract Metadata' option and I tried viewing it in Bridge. No information came up in the Metadata window though, even with the sidecar.
Thanks in advance everyone.
~Matthew

All you need to do is compare the schema's used in the Dam and the actual raw data of a file.
What I have found is that some names do change IE: Caption - Description they are both the same schema.

Similar Messages

I have a MacBook Pro running 10.6.8 model 7.1; need to upgrade to Mavericks. My question concerns 3 software apps: Reunion 10, Quicken 2007, Appleworks 6.2.9. Any recommendations?

I have a MacBook Pro model 7.1 running 10.6.8; need to upgrade to Mavericks...question concerns 3 software apps: Reunion 10, Quicken 2007, Appleworks 6.2.9 (word processing docs). Any recommendations?

Quicken Essentials is universally loathed on this forum. Quicken 2007 updated for Lion, Mt. Lion and Mavericks for $15 is the way to go:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
Appleworks 6:
Partition your hard drive or add an external drive and install Snow Leopard and use the "dual-boot" method to run Appleworks; and/or
Install Snow Leopard Server (available by telephone order only from the Apple Store 1.800.MYAPPLE [1.800.692.7753]; part number - MC588Z/A) into Parallels and run Appleworks (and most other PowerPC apps) concurrently with Mavericks:
[click on image to enlarge]
Review Roger Wilmut's excellent series of articles, Abandoning Appleworks:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

Master iPad configurator question concerning cart syncing with different versions of iPads.

I have a question concerning configurator syncing.Can the master iPad be a different version of iPad than the other synced iPads? For instance can iPad 2 be the master iPad to a group of iPad Air's? The iPad 2 has some fewer capabilities than the Air, would some settings or restrictions be left off of the iPad Airs if they were set up this way? Thanks.

There is no such thing as 'master iPad'. If you're using Configurator or Profile Manager control of the setup is done from a Macintosh.

Might go for T400/500- Many questions concerning Think Vantage

Hi,
I am deciding on my first IBM, a T400 or T500
I have a few questions concerning the Think Vantage Function:
a) Does the recovery DVD set back the hard drive partitions to factory settings?
b) Does the Think Vantage function set back the hard drive partitions to factory settings?
This means the original size of the partitions, when they have been changed manually.
c) Does Think Vantage work with a self buyed Windows Vista?
d) Does Think Vantage work unter Windows XP
e) Does Think Vantage need drivers/ anything else to work or is it entirly working on the hardware side, so no software/ windows is needed
f)Will Think Vantage work under Windows 7 in a T400/500
g) How was the past situation? Did a under Windows XP working Think Vantage also work on Vista / have there been drivers delivered, when needed, for the new OS
h) Is it possible to set up a new OS (like Vista Ultimate) and then backup it up on a external hard drive and later recover from this?
What do I want to achieve?
I want to recover the factory settings at all times, this means partition size, number of partitions etc. and Windows Vista Business. Then I want to install Vista Ultimate do my settings and backing it up to an external drive or whatever and then recover from that all 3 Months. In the end I should be able to set back factory settings with the earliest/ first backup from Windows Business; Furthermore I might want to install Windows 7 sometimes.
Thank you for your help! Kind regards
Message Edited by Schwenker on 11-23-2008 08:23 AM

Hello,
I would recommend Acronis to do this job. Here is a link at thinkpad-forum.de.
You´ll get Acronis for free if you buy a PCWelt.
Your answers:
A. yes
B: yes
C: yes
D: yes
E: No, windows is needed and if it´s XP than MS NET 2.0 also.
F: yes, when windows 7 is out, than Thinkvantage will work then, on Server 2008 it seems to work.
G:Thinkvantage work in Vista and XP environment.
H: yes, you can backup it on a extern hdd and later recover the R&R Image to the internal disc.
What do I want to achieve?
I would recommend Acronis to do this job. Here is a link at thinkpad-forum.de.
You´ll get Acronis for free, if you buy a PCWelt.
here are some interesting benchmark with first versions of Windows 7 and XP.
Windows 7 unmasked
Perceptions becomes reality
Message Edited by Agotthelf on 23-11-2008 10:23 PM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Questions concerning ST Simple Transformations

I got some questions concerning Simple Transformations:
1.) When editing a simple transformation, how to insert comments? In pure ABAP, a comment line must have as asterisk in the first column...
2.) I use <tt:loop>...</tt:loop> and want to use the index of the currently processed entry, like SY-TABIX when implementing a "LOOP AT itab" in ABAP. Is there a way?
Thanks for your answer, points will be rewared...
-MIKE

Hi Jack, please find some sample coding below that will solve your issue:
<tt:cond check="not-initial(ref('E1EDL20.INCO1'))">
<INCO1 tt:value-ref="E1EDL20.INCO1"/>
</tt:cond>
With the simple transformation tt cond statment you can make an XML tag optional. In below example during deserialisation xml tag <INCO1> will be skipped when not availabke in the xml and SAP data E1EDL20.INCO1 will not be filled by the transformation.
Regards. Please give points when usefull !

My question concerns the ipad monthly calendar view.

My question concerns the ipad monthly calendar view. An all day event spans two days in the monthly calendar view. Is this a bug?

The entry is correct in day and week view. In the month view, the event carries to the next day indicating it ends at 12:00am.

Question concerning Tiger installation

Hello,
currently I have OS X 10.2.8 and most recently I bought tiger...I have a question concerning the installation process. I inserted the disk and completed the first couple of installation steps and when I get to the 3rd step to choose a hard dive to install the operating system on, my slave drive is the only option that appears, not my mac hd drive that already has the current operating system on it...should i install tiger on my slave drive or is there a way to get my home drive as an option?? I have more available space on my mac hd drive and would say that it is the main drive that contains all the information to run this computer....
any info on this matter would be greatly appreciated.....peter
Dual 1.25 GHz G4 Mac OS X (10.4.3)

when selecting the startup disk, should there always be a ? mark on the drive icon? Well, i selected the mac osx2.8 system and will try the process again.....thanks....
Dual 1.25 GHz G4 Mac OS X (10.2.x)

Question Concerning Anchor Usage

New to Dreamweaver's web world and have a question concerning
Anchors and Drop Down Menus. Is it possible to have one of the
selections from my main navigation drop down menu Anchored to a
particular section of a page?
Thank You for any input.

OH, that. Duh.... 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"E Michael Brandt" <[email protected]> wrote
in message
news:fu5vq2$gs1$[email protected]..
> jcraw77 wrote:
>> New to Dreamweaver's web world and have a question
concerning Anchors and
>> Drop Down Menus. Is it possible to have one of the
selections from my
>> main navigation drop down menu Anchored to a
particular section of a
>> page?
>>
>> Thank You for any input.
>
> Sure, just make its link be href="#anchorname"
>
> --
>
>
> E. Michael Brandt
>
> www.divahtml.com
>
www.divahtml.com/products/scripts_dreamweaver_extensions.php
> Standards-compliant scripts and Dreamweaver Extensions
>
> www.valleywebdesigns.com/vwd_Vdw.asp
> JustSo PictureWindow
> JustSo PhotoAlbum, et alia
>
> --

Question concerning Servicing

Hey all.
I have a question concerning the servicing of my Macbook.
My laptop (less than a year old and still under warrenty) has several dead pixels on the display and the case has developed a chip on the palm rest when the display lid (prongs) meets the palm rest (I believe that this is a popular problem). I did initiate a self repair on the chipped palm rest with super glue to fix it temporarily.
The question is if i take my laptop to the Genius bar, will I be able to get both the screen repaired and the palm rest repaired. And if so how long do you think it will take to replace both and any indication about costs.

jfdm wrote:
Hey all.
I have a question concerning the servicing of my Macbook.
My laptop (less than a year old and still under warrenty) has several dead pixels on the display and the case has developed a chip on the palm rest when the display lid (prongs) meets the palm rest (I believe that this is a popular problem). I did initiate a self repair on the chipped palm rest with super glue to fix it temporarily.
The question is if i take my laptop to the Genius bar, will I be able to get both the screen repaired and the palm rest repaired. And if so how long do you think it will take to replace both and any indication about costs.
I would think you would have no problem with just a simple super-gluing of the palm rest, provided you didn't get it all over the rest of the case. Dead pixels may be another issue. Industry standards say that a certain amount of dead pixels are acceptable. Yield would go way down if all LCD panels were required to be perfect and stay perfect. Your best course of action is to make an appointment and ask. Good luck.

Question concerning KW Content Update

Hello,
I have a question concerning updating the KW content: On the Content Update DVDs are *.KWE files. What should I do with this files? Must I also import these files with my batch file like the *.SAP files?
Could someone help me?
Thanks
Edited by: Malte Jacobi on Apr 8, 2008 8:39 AM

"And Custom Tags scares me"Then you better dont read to many posts in this forum.
and maybe not the rest of my post either
With JSTL
Here all common fields
<c:choose>
    <c:when test="${test to see if its a landlord}">
          All the landlord field here
     <c:when>
    <c:otherwise>
          All the not landlord fields here
     <c:otherwise>
</c:choose>

Question concerning executing of sql

Hallo,
I have a question concerning the execution of sql-statements.
I have a database and different applications that work with this database. When I now have a session and this session sends statements that should be executed.
I want to ensure that the application can not execute all statements. What I want is a possibility that before a statement is executed there is a warning.
Is there something in oracle database. Something that I can tie down to a table or a view.
Any help appreciated.
Thanks

Hi,
I have a question concerning the execution of sql-statements.
I have a database and different applications that work with this database. When I now have a session and this session sends statements that should be executed.
I want to ensure that the application can not execute all statements. What I want is a possibility that before a statement is executed there is a warning.
As per my understanding see, Does your application is executing the series of Queries directly from the Frontend environment for Calling any Stored procedure to do the necessary Job.
In case of queries, then say try to use some schema, where and what ever you want to keep the restrictions on certains table / Access grant respective Rights to some role and assign to the required schema.
So, In case if you want restrict some thing make your application to connect with respect user.
Else the above option is not possbile from your end then I think at table you can not restrict or raise any alerts or warnings, until the user don't have access to table. Other check with DBMS_ALERT, yoy might find any relavant thing for your problem.
If you are using stored procedures, then you can able achive that, that Send an Additional parameter Is_Access or Is_Executable. This parameter send the boolean values true or false or 1 or 2 as per your checking feasibility, at code level, make sure than when ever you need send the warning send appopriate boolean value and which return the message from stored procedure (out parameter ) to application and will not execute the Code, If appopriate Boolean value is send from application call , then perform the Business transaction as per requirement.
If I am missing from your requirement perspective, then I am sorry...
- Pavan Kumar N

Question concerning sap script

Hi all experts! I have a question concerning sap script
First some background information:
Ive created a sap script that is called from a function module and from an executable program, when I run the executable program the sap script work fine, but when I run the function module, all the variables in the sap script dont have value
In the function module the variables are defined in the top include
I dont know why these variables dont take his value from the function module
Any ideas?
Thanks in advance.
Message was edited by: Gerardo hernandez

I think that sapscript expects its variables to be in the program which calls the fm <b>by default</b>. When you test via SE37 the framework itself is the calling program and it's unlikely that it will have a variable named kunnr-name1.
To over-ride this default, inside your fm pass the 'options' parameter(type itcpo) to 'open_form' and set the 'tdprogram' value to sy-repid in the function module.
I have tested this in my own environemnt and initially got the same error as you. When I set the tdprogram variable it started working!

Question concerning WiSM operation

I have a question concerning the operation of the wireless network and the WiSM in a 6500 that we have put in place. My customer has the following setup: On thier mainsite, they have a core 6500 with a WiSM module in place. They have 4 remote sites, with several APs at each remote site. Each remote site is setup in an all Cisco environment, where its typically AP --> cisco switch --> fiber to main site cisco switch --> core --> then on to where ever. I have an engineer telling me this, that whatever wireless data traffic (internet, anything) that hits the AP (at any site), it must go THROUGH the WiSM module. I would have thought that the WiSM module would be for ONLY management of APs, not for data traffic handling.
Again, he says that ALL traffic (internet, etc) goes through the WiSM module, then on out through the infrastructure.
I would have thought that traffic would go through the AP only, then through the infrastructure.
Can you verify wheather data traffic from any wireless device through the AP actually traverses the WiSM module or not?
Again, I thought the WiSM module would be only for management of APs. Thanks.

The engineer is largely correct. By default, the APs will tunnel all traffic to the controller to be distributed according to VLAN/SSID. The controller and the AP work together to perform the normal wireless <-> wired bridging. This allows some flexibility in how the infrastructure handles mobile clients. There are many benefits to the Cisco Unified model (or LWAPP).
We have three hospital campuses and only a couple remote wireless sites. They are all well-connected. As all our primary app servers are on one campus, we only have controllers on that one campus. The client traffic is bridged at the main campus.
The Cisco Unified model does offer other modes of operation (H-REAP for example) that allow some local traffic to bypass the controller and be bridged by the AP to the local LAN. There are some caveats to this, however, and you'd want to read up on it before trying it:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig41/index.htm
or more specifically:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig41/c41hreap.htm

Dreamweaver cs6 suite development questions/concerns

Hello,
I am new a new creative cloud subscriber. I have past experience with programming a java environments and SQL. I am new to HTML5/CSS3 and have read a book on the subject to understand the design concepts in effort to find a good environment to develop mobile applications. I like what I see using fireworks to create HTML5/CSS3 to create code for more complex objects/elements.
Additionally, watched all the videos and am ready to roll up my sleeves and get started. As I have watched the videos and goggled allot of forums regarding DM CS6 and web applications I have a few questions and concerns. I will preface this with the understanding that this involves new features/ technologies and will suffer some growing pains.
Questions/ Concerns:
1) Fluid Grid Layout tool:
Can I create a mobile application with this tool that will work on both tablets and smart phones (not desktops) compiling a single optimized site using the phone gap tool; or do I have to create 2 separate site and compile?
2) Phone Gap
I have read that there are allot of issues with compiling applications. Even watching the adobe road show video, they could not get it to work (yikes).I have also read that I phone product code need to be compiled using xcode(tools); needed to have an apple subscription (which I have access to) What are the known issues compiling mobile applications for the different device platforms?
3) Sever-Side Mobile Applications
a) As I understand it, this cannot be accomplished with this environment without a web service that communicates to the server-side scripting/ Database server.
b) Reading about local storage, what are the limitations and how do they effect mobile applications if there is more complex scripting and large record sets?
C) Are there ways to create user/ security roles (I would imagine the integrity issues with security would be staggering)?
4) Responsiveness
I have played around DM, I have noticed it crashing and being very sluggish. I know its not memory or processing issues as I have read several posts on the topic.
It seems that adobe is making it easier to design and develop within one product/suite. These tools seem very powerful. The direction makes sense as I like elements of both development and design. I am concerned that I will hit walls and want to avoid banging my head. I am still new to this environment and the mistakes may be mine. With that being said, do you think Adobe will get these issues resolved out and have a great environment and development model.
Thanks in advance for the light anyone can shed on these subjects as I am eager to get started (but a bit worried).
Erich

Hi
To add to Davids reply -
Item 3:
Are you talking about apps. or web pages on mobile devices, (they are not the same thing)?
If web pages then the server/database side is no different to a normal web page which does require a server supporting these. As for local storage, (works whilst off-line) this is normally done via javascript and a local database, but I would not use this feature for anything too complicated as the database is stored on the users computer/device, and only 'communicates' with your server/database when the user is once again on-line and connected to your web page.
As for item 3.c. - Doing this for off-line use is a complete waste of time, as the user has access to any encryption code and the database entry's, which they can then use when on-line again. A simpler solution would be to require just the users credentials and store this locally, (still not ideal, but at least all the users DB is not downloaded).
Regarding item 4. Some users have reported problems, but for me personally 99.9% of them I have not experienced with the release version of CS6, and performance issues for me all vanished when I upgraded my PC to an i7 processor with 16Gb memory, an extreme solution for many I admit, but your computers speed and memory will have a dramatic effect on the user experience.
PZ

Questions concerning XMP

Similar Messages

Maybe you are looking for