Questions: Late Model and Flash based iPod utilities

In the past I found it somewhat cumbersome to have to fully Restore iPods in order to repair their function.
So in order to keep my 3rd Gen. iPods in good shape I routinely needed to run
third-party disk repair utilities which have kept the iPods in fine running shape.
I notice that not much is available anymore in the way of an iPod utility, and for the Flash-Memory based iPods there seems to be none available.
Do the later model iPods no longer need maintenance?
Is there a utility that can repair and maintain a Flash Memory based drive
with out having to resort to erasing and restoring?
(i.e. do flash based drives never get directory errors?)
Thanks in advance for any referrals

Belated thanks for the reply
I have been a bit ill, and not computing, lately.
It is my understanding that Restore function erases the iPod.
I find it more desireable to repair the 'pods without having
to lose all files.
Also, it seems to me that running a repair routine is a rather short time frame
(i.e. the time, only, that it takes to rebuild or repair the directory)
This seems not to be significantly more time that it would take to load
a couple-of-dozen songs.
Thanks again and sorry for the delay

Similar Messages

Adobe Flash and Flash based Video Players and the ps command

OK, I have two v20z servers. I just reinstalled Solaris 08/07 on both of them. These are both Sunray servers. One of the servers is fully patched and has SRSS 4.0 installed and serving Sunrays just nicely. I just finished installing Solaris on the 2nd server.
On the first one I'm not sure what whacked things, the patches or SRSS
If I go to a site with a flash based video player like youtube, Firefox or Mozilla will freeze untill the video is fully streamed.
Also on this server the "ps" command is super slow. I like to do ps -efa|grep whatever to find processes. This unbearably slow on this 1st server.
On the 2nd server I haven't yet patched it or installed SRSS. I think though it's the patches and not SRSS
On this server the Flash 7 that comes preinstalled works fine on streaming videos. It also works fine with Flash version 9,0,47,0. I even copied the 9,0,47,0 version of flash from the server that where flash is freezing, so it's not flash that is the problem I don't think.
Normal flash animations work fine, it's just flash based streaming video players.
Something after patching seems to have done this
Anyone else have a really slow ps and flash that freezes the browser while watching videos?

*** BUMP ***
Really? No one else has experienced this? I can easily recreate the issue, but can't find any fix.

Cubes - COPA Based Model and Account Based Model.

please search the forums before posting - the COPA models is well documented in help.sap.com and also in the forums
Hi All,
Can some one tell me the difference in Cubes based on COPA Based Model and Cubes on Account Based Model?
thanks
Edited by: Arun Varadarajan on Jan 28, 2009 8:11 PM

please search the forums before posting - the COPA models is well documented in help.sap.com and also in the forums
Hi All,
Can some one tell me the difference in Cubes based on COPA Based Model and Cubes on Account Based Model?
thanks
Edited by: Arun Varadarajan on Jan 28, 2009 8:11 PM

Playing QuickTimes and Flash-based websites on iPhone

Hello ~
I am unable to watch QuickTime movies or look at Flash-based websites on my iPhone. Do I need to download something in order to do these things? I have seen others with iPhones that can...any help is appreciated.
Thanks!

Quicktime is built into the OS of the phone and you should have no problems with .mov or .mp4 movies in the formats that the iPhone supports. Flash cannot be played on the phone at this time.
For more information on movie formats the phone supports, see:
http://support.apple.com/specs/iphone/iPhone.html
If properly formatted quicktime videos are not playing on the phone, try resetting the phone (top and home button until you see Apple logo).

Scrub question for dreamweaver and flash

It has been forever since I have used Dreamweaver. I pretty much stick to print design with the exception of my own stuff, and my last few sites have all been done 100% in Flash. So I am in the process of putting together my new site in dreamweaver and have gone through a few hours worth of tutorials so think I am well on my way to getting something up.
My plan is to have a flash header that I am hoping can stay the same throughout the site. In other words, I dont want it to reload each time it goes to a new page, just keep playing. Is there a way for me to easily accomplish this? I am assuming this would be on the DW side, but if need be I can post on the Flash forums.
Now the one other thing, if its something that can be done but is a total nightmare to deal, or just too far out of my league since I havent used DW any time recently just let me know and I will come up with a new plan.
Thanks in advance!

Thanks for the feedback. I knew going into those last sites what limitations flash brings to the table. Beleive it or not those two didn't really play into my thought process at all. I get very little traffic, most of it from people actually typing in the web address or linking to it from after I email it to them. It does on the other hand let me do some really creative stuff like a drag and drop resume that was modeled after a pantone book. Anyways, the big thing thing that is pushing me to go the the other direction at this point is mobile devices. Just driving me up the wall that I cant see my site on my iphone.
As far as the current project goes, thanks again. I think I will just skip the flash at this point, and I have already been thinking about a back up plan. No point in trying to figure out how to do something that is already dated.
Now for question two. I have a client that I do print work for that has a similar issue. He has a "music player" on his site that has a similar problem. Any time someone changes pages the song stops, and when the new page loads so does a new song. No idea what sort of technology/ program/ addons were used for this, but it drives me nuts anytime I go to his site. Would it be a similar process for the music player to conitinue pllaying? Meaning the frames? Would just like to be able to point him in the right direction so he can tell his web guy.
Thanks!

The unsolvable question: Stopping beeps and static on Ipod

This is my 3rd or 4th post for this, so far nobody knows. The 5 "R's" haven't worked either, and it always seems that cold weather makes it act up worse. Here's my previous post:
Need major help, b/c this is getting frustrating... My 30G Video Ipod is allowing quick digital "beeps" nearly 1/2 the time I play songs now. Sometimes, it is so frequent, it's almost static-like. Here's what I have discovered and ruled out:
-It is not the song files, b/c the same song can often play a day, or even 30 minutes later, perfectly crisp and clear.
-It is not the plug-in in my car, b/c the earphones detect the same barrage of beeps.
-It may have something to do w/ the battery/charge... Once, when the car charger was charging, I detached/ reattached it and noticed that the charger added many beeps, possibly the stream of electricity affected the player reading files? However, there were lots of beeps anyway.
-It may have something to do w/ the Ipod charge... It happens some when the battery is very low, but it happens alot when the battery is completely full, and played immediately after charging.
All that said, there's no real rhyme or reason to it, and even w/ a 1/2 battery charge, sometimes it still decides to sound screwy w/about 2 or 3 "digital beeps" per second.
Any ideas? Thanks!

Thanks Alwaystubed
The 1st nano still had distortion even with the EQ turned off. However after I mucked with the plug for a bit and got the replacement working. I found it had virtually no distotion with the EQ off. Hopefully its replacement will be the same.

Report using Tabular Model and Measures based on Distinct Counts

Hello,
I am creating a report that should present something like this:
YEAR-1 | MONTH-1 | MONTH-2 | MONTH-3... | YEAR | MONTH-1 | MONTH-2 | MONTH-3...
My problem is that when designing the dataset to support this layout I drag the Year, Month and Distinct count Measure, but on the report when I want the value for the YEAR level I don't have it and I cannot sum the months value...
What is the best aproach to solve this? Do I really have to go to advanced mode and customize my MDX or DAX? Can't basic users do something like this that seems so trivial and needed?
Thank you
Luis Simões

Hi Luis,
According to your description, you create a Reporting Services report using Analysis Service Tabular Model as the datasource, now what you want is sum the months value on year level, right?
In your scenario, you can add the Month field to column group, add a parent group using Year Field and then add a Total on Month group. In this case, Reporting Services will sum the months value on Year level. I have tested it on my local environment, the
screenshot below is for you reference.
Reference:Lesson 6: Adding Grouping and Totals (Reporting Services)
If this is not what you want, please describe your dataset structure, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

I have a MacBook Pro Late 2011 and having issues with utilities screen.

I have a MacBook Pro Late 2011. I want to reformat my hdd to start from scratch. My issue is when I am on the utilities screen I am unable to click on anything. I want to delete my current partition but I am unable to click on Disk Utilities. Please help me!

According to your profile your Mac is running v10.7.3 Lion.
If that is the case, to reformat the hard drive you need to use Lion Recovery not Disk Utility.

A few questions with XML and Flash

Hi there.
I am currently trying to create a 3d carousel using AS2 and XML. I've made a lot of progress, but there ar e few things I am still struggling with and was hopoing that someone here could please steer me in the right direction.
Here is a URL where the Carousel can be found:
http://iongeo.com/ru_innovation_test_dev/carousel_test.html
Here are a few of the things I am wondering:
1. I would like to be ablle to add a back button movide clip, similar to how the tooltip movie clip is presented now; this movie clip would be able to allow users to go back home to the caousel. I can't seem to get it to load correctly however, I would imagine that it would be set up similarly to how the tooltip icon is set up now, but to be able to have an alpha of 100 when the text is loaded in.
2. I was also wondering how I mihgt be able to add links to my .xml document to be able to call in URLs on the web. I've tried several things using the CDATA approach, but can't seem to get it to work.
I would greatly appreciate any assistance privded and am very greatful for any consideration thac ould be provided. Please let me know if there is anything htat I should clarify on.
Below is my code for AS2 and XML so that you might see how things are currently working.
import mx.utils.Delegate;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var numOfItems:Number;
var radiusX:Number = 200;
var radiusY:Number = 75;
var centerX:Number = 300;
var centerY:Number = 150;
var speed:Number = 0.00;
var perspective:Number = 20;
var home:MovieClip = this;
theText._alpha = 0;
theHeader._alpha = 0;
var tooltip:MovieClip = this.attachMovie("tooltip","tooltip",8000);
tooltip._alpha = 0;
var xml:XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = function()
    var nodes = this.firstChild.childNodes;
    numOfItems = nodes.length;
    for(var i=0;i<numOfItems;i++)
        var t = home.attachMovie("item","item"+i,i+1);
        t.angle = i * ((Math.PI*2)/numOfItems);
        t.onEnterFrame = mover;
        t.toolText = nodes[i].attributes.tooltip;
        t.content = nodes[i].attributes.content;
        t.header = nodes[i].attributes.header;
        t.icon.inner.loadMovie(nodes[i].attributes.image);
        t.r.inner.loadMovie(nodes[i].attributes.image);
        t.icon.onRollOver = over;
        t.icon.onRollOut = out;
        t.icon.onRelease = released;
function over()
    //BONUS Section
    home.tooltip.tipText.text = this._parent.toolText;
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
    home.tooltip.onEnterFrame = Delegate.create(this,moveTip);
    home.tooltip._alpha = 100;
function out()
    delete home.tooltip.onEnterFrame;
    home.tooltip._alpha = 0;
function released()
    //BONUS Section
    home.tooltip._alpha = 100;
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        t.xPos = t._x;
        t.yPos = t._y;
        t.theScale = t._xscale;
        delete t.icon.onRollOver;
        delete t.icon.onRollOut;
        delete t.icon.onRelease;
        delete t.onEnterFrame;
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,0,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,0,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,100,0,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,100,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,100,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,100,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,200,1,true);
            var tw5:Tween = new Tween(theText,"_alpha",Strong.easeOut,0,100,1,true);
            theText.text = t.content;
            var s:Object = this;
            tw.onMotionStopped = function()
                s.onRelease = unReleased;
function unReleased()
    var sou:Sound = new Sound();
    sou.attachSound("sdown");
    sou.start();
    delete this.onRelease;
    var tw:Tween = new Tween(theText,"_alpha",Strong.easeOut,100,0,0.5,true);
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,0,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,0,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,0,100,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,100,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,100,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,t.xPos,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,t.yPos,1,true);
            tw.onMotionStopped = function()
                for(var i=0;i<numOfItems;i++)
                    var t:MovieClip = home["item"+i];
                    t.icon.onRollOver = Delegate.create(t.icon,over);
                    t.icon.onRollOut = Delegate.create(t.icon,out);
                    t.icon.onRelease = Delegate.create(t.icon,released);
                    t.onEnterFrame = mover;
function moveTip()
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
xml.load("icons.xml");
function mover()
    this._x = Math.cos(this.angle) * radiusX + centerX;
    this._y = Math.sin(this.angle) * radiusY + centerY;
    var s = (this._y - perspective) /(centerY+radiusY-perspective);
    this._xscale = this._yscale = s*100;
    this.angle += this._parent.speed;
    this.swapDepths(Math.round(this._xscale) + 100);
this.onMouseMove = function()
    speed = (this._xmouse-centerX)/8000;
// inactive mouse time (in seconds) to start slowing the carousel
var inactiveMouseTime:Number =1;
// rate of slowing carousel;
var speedDamp:Number = .4;
var speedI:Number;
var startSlowTO:Number;
this.onMouseMove = function(){
clearInterval(speedI);
clearTimeout(startSlowTO);
startSlowTO = setTimeout(startSlowF,inactiveMouseTime);
    speed = (this._xmouse-centerX)/8000;
function startSlowF(){
clearInterval(speedI);
speedI=setInterval(speedF,2000);
function speedF(){
speed = speedDamp*speed;
if(speed<.1){
clearInterval(speedI);
speed=0;
Here is an example of how things are loaded from XML:
<icons>
<icon image="Denver_test_icon.png" tooltip="Denver Icon Test" header="test header" content="Test Paragraph. Greeked:. Suspendisse condimentum sagittis luctus." />
</icons>

Hi there.
I am currently trying to create a 3d carousel using AS2 and XML. I've made a lot of progress, but there ar e few things I am still struggling with and was hopoing that someone here could please steer me in the right direction.
Here is a URL where the Carousel can be found:
http://iongeo.com/ru_innovation_test_dev/carousel_test.html
Here are a few of the things I am wondering:
1. I would like to be ablle to add a back button movide clip, similar to how the tooltip movie clip is presented now; this movie clip would be able to allow users to go back home to the caousel. I can't seem to get it to load correctly however, I would imagine that it would be set up similarly to how the tooltip icon is set up now, but to be able to have an alpha of 100 when the text is loaded in.
2. I was also wondering how I mihgt be able to add links to my .xml document to be able to call in URLs on the web. I've tried several things using the CDATA approach, but can't seem to get it to work.
I would greatly appreciate any assistance privded and am very greatful for any consideration thac ould be provided. Please let me know if there is anything htat I should clarify on.
Below is my code for AS2 and XML so that you might see how things are currently working.
import mx.utils.Delegate;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var numOfItems:Number;
var radiusX:Number = 200;
var radiusY:Number = 75;
var centerX:Number = 300;
var centerY:Number = 150;
var speed:Number = 0.00;
var perspective:Number = 20;
var home:MovieClip = this;
theText._alpha = 0;
theHeader._alpha = 0;
var tooltip:MovieClip = this.attachMovie("tooltip","tooltip",8000);
tooltip._alpha = 0;
var xml:XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = function()
    var nodes = this.firstChild.childNodes;
    numOfItems = nodes.length;
    for(var i=0;i<numOfItems;i++)
        var t = home.attachMovie("item","item"+i,i+1);
        t.angle = i * ((Math.PI*2)/numOfItems);
        t.onEnterFrame = mover;
        t.toolText = nodes[i].attributes.tooltip;
        t.content = nodes[i].attributes.content;
        t.header = nodes[i].attributes.header;
        t.icon.inner.loadMovie(nodes[i].attributes.image);
        t.r.inner.loadMovie(nodes[i].attributes.image);
        t.icon.onRollOver = over;
        t.icon.onRollOut = out;
        t.icon.onRelease = released;
function over()
    //BONUS Section
    home.tooltip.tipText.text = this._parent.toolText;
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
    home.tooltip.onEnterFrame = Delegate.create(this,moveTip);
    home.tooltip._alpha = 100;
function out()
    delete home.tooltip.onEnterFrame;
    home.tooltip._alpha = 0;
function released()
    //BONUS Section
    home.tooltip._alpha = 100;
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        t.xPos = t._x;
        t.yPos = t._y;
        t.theScale = t._xscale;
        delete t.icon.onRollOver;
        delete t.icon.onRollOut;
        delete t.icon.onRelease;
        delete t.onEnterFrame;
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,0,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,0,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,100,0,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,100,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,100,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,100,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,200,1,true);
            var tw5:Tween = new Tween(theText,"_alpha",Strong.easeOut,0,100,1,true);
            theText.text = t.content;
            var s:Object = this;
            tw.onMotionStopped = function()
                s.onRelease = unReleased;
function unReleased()
    var sou:Sound = new Sound();
    sou.attachSound("sdown");
    sou.start();
    delete this.onRelease;
    var tw:Tween = new Tween(theText,"_alpha",Strong.easeOut,100,0,0.5,true);
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,0,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,0,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,0,100,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,100,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,100,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,t.xPos,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,t.yPos,1,true);
            tw.onMotionStopped = function()
                for(var i=0;i<numOfItems;i++)
                    var t:MovieClip = home["item"+i];
                    t.icon.onRollOver = Delegate.create(t.icon,over);
                    t.icon.onRollOut = Delegate.create(t.icon,out);
                    t.icon.onRelease = Delegate.create(t.icon,released);
                    t.onEnterFrame = mover;
function moveTip()
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
xml.load("icons.xml");
function mover()
    this._x = Math.cos(this.angle) * radiusX + centerX;
    this._y = Math.sin(this.angle) * radiusY + centerY;
    var s = (this._y - perspective) /(centerY+radiusY-perspective);
    this._xscale = this._yscale = s*100;
    this.angle += this._parent.speed;
    this.swapDepths(Math.round(this._xscale) + 100);
this.onMouseMove = function()
    speed = (this._xmouse-centerX)/8000;
// inactive mouse time (in seconds) to start slowing the carousel
var inactiveMouseTime:Number =1;
// rate of slowing carousel;
var speedDamp:Number = .4;
var speedI:Number;
var startSlowTO:Number;
this.onMouseMove = function(){
clearInterval(speedI);
clearTimeout(startSlowTO);
startSlowTO = setTimeout(startSlowF,inactiveMouseTime);
    speed = (this._xmouse-centerX)/8000;
function startSlowF(){
clearInterval(speedI);
speedI=setInterval(speedF,2000);
function speedF(){
speed = speedDamp*speed;
if(speed<.1){
clearInterval(speedI);
speed=0;
Here is an example of how things are loaded from XML:
<icons>
<icon image="Denver_test_icon.png" tooltip="Denver Icon Test" header="test header" content="Test Paragraph. Greeked:. Suspendisse condimentum sagittis luctus." />
</icons>

Plugin-container constantly opens and closes when i try to acces flash-based stuff.

When i try to see any media that requires plugin-container to boot, it boots up and then immidiately closes, and boots up again and so forth until it just gives up. It doesn't affect anything else in the browser other then inability to use any flash applications, such as youtube videos, other types of video-services and flash-based games. The plugin-container for Unity applications works fine and is not affected. I tried to reinstall Firefox and reset it, but it didn't work.

Reinstalling the flash player solved all of the problems.

Adobe Air and Flash Future on Desktop and Mobile Devices

Hello,
iam interested to develop for mobil and desktop devices with AS3 and Flash Professional and i have any question.
I see also many benefits to develop in flash as in java because javas gui development is based on swing a old java graphics engine.
Next reason is the plattform like Linux,Windows,IOS.,the Game Development and other stuff.
With Flash i can create nextgen interactive stunning cool gui interfaces for apps.
I dont know why flash sucks for the market and devices.
My question: is as3 and flash save for the future ?
Make it really sense to learn as3 and Flash ?
I have read many blogs,threads on adobe and other forums year 2012 Adobe stop flash development,
and now 2013 google androids kitkat now have removed api features that kills complete flash !!!
Other comments says Flash is dead for the market!? Many frustradet flash developers he work 10 years and more with flash are crying.
So what is really the Future for the A3 and Flash Development ?
Thanks and greetings

Hi mc_gfx,
> You think i can get started with flash and air development without worries?
Software development always involves risk, so you can't really do much without worries.       AIR in particular is a cutting (bleading?) edge technology. Adobe is attempting to solve a difficult problem with limited resources, and the results aren't always ideal.
If you want to deploy to Android and iOS, and you write two native apps, you face a 100% risk that you'll have to write your app twice. While this may not take twice as long as writing it once, it will come close.
If you use AIR, you only have to write your app once, but you face other risks.
Here's the problem. In AIR, Adobe is attempting to create a framework that translates ActionScript into bytecode for two different platforms. This isn't easy. Every time Apple or Google upgrades their operating system Adobe has to try to refine AIR so that it translates everything correctly for the new OS. AIR also has to maintain backward compatability with all previous OSs (is that the plural of OS?). AIR also has to work with many different models of Android and iOS devices. This includes supporting most, though not all, of the many different capabilities that these OSs support. Adobe, wisely, doesn't try to support every new feature immediately. Instead, it picks and chooses which new features it will support, and how soon. But even taking this approach I have the impression that their task is daunting.
If you research this forum you'll find numerous examples of people complaining about features that don't quite work correctly. For example, I've put ~6 developer months into developing a language learning app, only to find that AIR's MP3 playback support has some limitations which severely impact the playback of voice recordings, which severely degrades the value of my app. I'm hoping that Adobe will fix this bug, but it's been two months now, with no movement. Another serious bug, involving audio recording using the device microphone, took three months to get fixed. During that period I had no idea whether it would get fixed, or whether I'd have to disable an important feature of my app on iOS.
So, you want "without worries"?
Some people are lobbying Adobe to include support for Windows Phone in the AIR framework. IMHO, this is madness. Adobe clearly has limited resources. Let them first focus on making basic features like MP3 playback work properly on the platforms that they already support.
The same issues probably apply to all the other cross-platform development frameworks - Sencha, Xamarin, etc. They face the same difficult technical challenges. I can't speak to the question of how well they're addressing them, but I'd want research them carefully before I invested a lot of time into developing with them.
With regards to AIR, here's my advice: Before you start a non-trivial project using AIR, make a list of all the things that your app will do, then see if you can find existing apps created with AIR that do these things. Make sure that the feature works on both Android and iOS. You won't be able to test on every device that you'd like to support, but pick a few and test on them.
You don't need to worry about your app's logic - ActionScript is great for that - and AIR translates it just fine. But think carefully about your app's 'skin' - all the ways that you want it to interact with the outside world - input and output - and confirm that apps exist that demonstrate that AIR can handle these features. Also think about the app's infrastructure - network interactions - database interactions - etc.
You'll probably end up with a list of features that you haven't been able to confirm. You can vet these by creating a proof of concept that confirms that AIR will support these needs. Do this before you start developing the full app. Once that's done, pray that everything that works now will continue to work with future OSs and devices. Adobe has a pretty good record on this sort of things, but there aren't any guarantees.
Don't worry, be happy        ?
HTH,
Douglas

Account Model and Key Figure Model

Hi,
please can anyone give me an explanation with example for Account Model and Key Figure Model
Thank you,
sam

Hi Sam,
Please see here:
keyfigure based model and account based model
Hope this helps...

Boot Camp Question .... I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp. If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"

I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp.
If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"... will it make my mac suseptible to viruses overall due to having a windows component? also will it make my mac slower as well

If you are only going to use one or two window only programs then I wouldn't waste the space. Try WinonX it allows you to install exe. Files on Mac without installing windows.

I recently attempted to re-install Mountain Lion on my MacBook Pro late 2012 model and the internet recovery is failing.

I recently attempted to re-install Mountain Lion on my MacBook Pro late 2012 model and the internet recovery is failing. I have absolutely no clue what to do here. Any help is greatly appreciated. Thank you.
- Currently if I boot it up there is a flashing folder icon with a question mark in it. I am assuming this means there is no OS because I wiped the SSD and tried to reinstall Mountain Lion
- When I hold Command+R, it prompts me to Choose Network... the problem with this is the wifi constantly is disconnecting. The Retina 2012 does not have an ethernet port so i have considered buying the attachment then returning when done.
Once again Thank you in advance.
Best.

There is nothing to do if you don't have a reliable Internet connection unless you have a copy of the Mountain Lion installer application from when you first installed it.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Questions: Late Model and Flash based iPod utilities

Similar Messages

Maybe you are looking for