Questions on Commands for planning application

Hi,
1. Where can i get the information on commands for planning functions?
2. What is the difference between
---Execute planning function simple and -
Execute planning function
3. I create planning layout with few buttons
a. Copy: I clicked on the copy button and can see the data in the layout
b. Save: Clicked on the save icon, Data saved into the planning cube
c. Change. : clicked on the change and changed few values and then clicked on SAVE button. Data got saved into my planning cube.
Now I my requirement is when user open the planning layout, It should only be in display mode. But currently automatically all the keyfigures are in change mode (Is it because in query designer, I checked "Start query in the change mode?)
When user opens the planning layout, he should run the copy function, then should save the data into the planning cube and then should be allowed to chagne. Change button should be in active until data is saved into the plannigng cube. IS this possible?
Thanks
Annie

Hi Deepthi,
Thanks for your reply.
I did as you mentioned and its working as expected.
User wants something like this
1. Execute the planning layout.
2. Click on the copy function
3. Save the data
4. Click on the change button so that data can be changed now.
As per your solution, without have change button its working perfectly. But now i want to have change button on the layout. Initially change button should be disabled. When i save the data then it should get active.
I did the following things but didnt work
1. Save button i have two commands
a. Save data
b. Set_item_parameters
2. Change button> disable>set_data_entry_mode.
After executing the layout. I could copy the data and save it. BUT after saving it change button is not getting active.
I think i did do something in save button (B). I just mentioned button group but didnt mention the change button. Can you please help me?
Thanks
Annie

Similar Messages

  • Commands for Planning Applications in WAD?

    Hi all,
    Following the developers' guide on 'Business Planning and Analytical Services'  for 2004S we got stuck on assigning custom Commands for Planning Applications in WAD, which were created in the planning wizard.
    The option for 'Commands for Planning Applications' does NOT show up in the command wizard!
    is there a ABAP/Java stack pre-requisite for this or is there a new(?) authorisation object missing?
    Does it helps for others? On which Java Stack?
    Thx,
    Markus

    Check OSS note 948336.

  • Unicode mode for Planning applications

    Is Unicode mode for Planning applications allowed in 11.1.2.1? If so how do you allow it?
    Seems that it is not allowed but the documentation is ambigious, and a search on the forum does not give clear answer.

    Thanks!
    But then why does the 8-character limit apply to unicode planning application names?
    Shouldn't ticking that checkbox enable longer application names?
    What's the limit for unicode Essbase applications, 32 characters? Then one should also be able to give a new unicode planning application a 32 character long name when in the create new planning application dialogue box, given that the data source is 'unicode'.
    Edited by: Markus on Aug 4, 2011 5:06 AM

  • Java Processes for Planning Applications

    Hi There,
    We've experienced performance issues where we have reached the limit of the java process for Hyperion Planning - WAS element. My question! Is it possible to create multiple java processes for Hyperion Planning, for example: If we have 7 Planning applications could we have 7 Java processes running - one for each application?
    Thanks
    Mark

    Couple of thoughts on scaling:
    1. Change the mx setting to 1200m -- this is the most you can scale a single instance on 32-bit
    2. Use a 64-bit platform you can set memory settings really high (AIX/Solaris)
    3. Multiple servers with planning on it using a load balancer
    Regards,
    John A. Booth
    http://www.metavero.com

  • Fetching data is very slow in workspace for planning application

    Hello Everyone,
    I am working in the web environment of a planning application and recently I have seen some issue's like Fetching data is very slow through webform's and the system will locking automatically and which kick me off from workspace when I refresh.So could you suggest me like what would be the reason's for this issue's.
    Thanks in advance

    Hi,
    Sounds like your form is very large or there are maybe a lot of dynamic calcs on the retrieval. How many rows and columns have you on the form ? Have you dense or sparse dimensions as rows or columns?
    Brian

  • Error to connecting business rules for Planning application outline

    Hi all,
    I recently migrated database schemas from uat to prod.i configured evrything successfully.when
    I loged into EAS console with user(other than admin)that user has all acces to create business rules,
    I tried to create new business rule to select planning application.
    I am getting this error" error connecting to essbase server<servername>:<appname>
    in error details "error connecting to pllanning server<servername>:<appname>"
    and "error loading objects from data source:java.sql.SQLException: [Hyperion][Oracle JDBC Driver]Object has been closed."
    Please anybody help on these
    regards
    vas

    hi john,
    we are using hyperion planning 9.3.1.1.11 version,
    we were new installatalled Production server and configured,but i did not test the business rules in production server,
    next my DBA exported Oracle Dabase Schemas from UAT server to Production sever those scema names are same in UAT and Production server,so my DBA droped The Schemas in production and replaced the UAT scemas in production server,
    After i manually configured the production server with Migrated scemas, in configuration i changed the server names with production sever and Database names while configuration ,Hyperion planning datasource names are same in UAT and Production ,i manually edited the server names and Database names, i configured to For EAS ,Shared Services,Planning
    Everything configured sucessfully,i am able to log on to application Planning url,and refreshed everything,
    But i am logon to EAS console, i tried to create the Business rule with associate Planning Application I am getting this error Connecting to essbase server<server name>:<appname>
    In error details "error connecting to pllanning server,servername>:<appname.
    and error loading objects from datasource:com.java.sqlexception;[hyperion][oracle jdbc driver]object has been close.
    please help on these
    thanking you
    srini

  • Admin owner for planning application migration

    I'm using the instructions from the following article to migrate a planning application. Migration of Hyperion Planning Application One of the steps is create a new Planning application with the same admin name as the older application. Unfortunatly, I'm not sure of what name was used when the application was originally created. Is there someplace where I can find this information.
    Thanks,
    Tom

    Hi,
    Just for your future reference it has been available since version 4.
    In 9.2      
    Select Administration > Application Settings.
    From the Show drop-down list, select Advanced Settings.
    Click Go.
    Select the System Settings tab.
    You will see an option "Select User" > The owner will be in the dropdown.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Modified Hourglass for Planning Application

    If I have a Planning application with the following dimensions, would a modified hourglass approach be recommended or I have heard that it is sometimes a good idea to keep 'Years' at the top of your Sparse dimensions.
    Current Dimension Order:
    Dim Type
    Dimension
    Total Members
    Stored Members
    Dense
    Account
    381
    242
    Dense
    Period
    35
    13
    NAS
    Years
    7
    6
    NAS
    Scenario
    10
    9
    NAS
    Version
    12
    10
    Sparse
    Building
    60
    58
    Sparse
    Office
    205
    135
    Sparse
    Department
    213
    204
    Sparse
    Job Title
    320
    320
    Sparse
    Employee
    4426
    4426
    Proposed Dimension Order:
    Dim Type
    Dimension
    Total Members
    Stored Members
    Dense
    Account
    381
    242
    Dense
    Period
    35
    13
    Sparse
    Building
    60
    58
    Sparse
    Office
    205
    135
    Sparse
    Department
    213
    204
    Sparse
    Job Title
    320
    320
    Sparse
    Employee
    4426
    4426
    NAS
    Version
    12
    10
    NAS
    Scenario
    10
    9
    NAS
    Version
    12
    10
    I know there is no hard fast order, but was just wondering as far as a Planning application goes if the 'modified' hourglass setup in the 2nd table is a good starting point for trying to gain some performance efficiencies.
    Thanks!
    JRG

    If you are on 11.1.2.2 you don't need to bother about TASKDIMS as it is automatically taken care of. Check this thread CALCTASKDIMS / CALCPARALLEL / Multi - CPU calculation / Performance
    Regards
    Celvin
    http://www.orahyplabs.com

  • Load balancing URL setup for planning application 11.1.2.1

    Hi Gurus,
    There is an existing planning environment with Weblogic/ Oracle HTTP load balancing setup. I just would like to know where would exactly be the generic/ common URL (the URL without actual servername) configured for planning and SmartView?
    Is there any properties file (weblogic/ HTTP) where we will mention those details?
    Thanks,
    Siva

    I am not sure I get what you are asking but planning can be accessed through workspace or by
    http://<ohs_server>:19000/HyperionPlanning
    and Smart View http://<ohs_server>:19000/workspace/SmartViewProviders
    If you want to understand about the configuration you can run a registry report.
    Cheers
    John

  • Command for planning sequence in analyzer

    Hi,
    I have some exit variables inside the query columns (dynamic filter). I am reading these variable values in FOX code and this function is in one sequence. Now when i attach the planning sequence in button, and run it, it is not able to read these variable values. How can i do that? I just gave the command as execute planning sequence, sequence name and data provider filter.
    Please let me know.

    Hi,
    System will not consider the values that are selected in query for execution of planning sequence even if the filter is same.
    What you can do is pass the value of country selected in the query via command range to your planning function using a normal Manual Input variable say ZCNTRY .
    Then in your FOX you can read the value of ZCNTRY and based on this can determine the value of currency.You can rather use a custom function module to determine the value for currency based on country than to use exit variable and call this function module using CALL FUNCTION in FOX.
    Regards,
    Deepti

  • How do I turn off hot key commands for the application menu/main nav?

    (I am using Photoshop CC on windows 7 64bit)
    I continue to have this problem which in many ways slows down my workflow. It is a bit difficult to explain so bare with me here.
    When I am working through the different functions and tools like switching from the polygonal lasso tool to duplicating a layer and then nudging the image with the directional keys the application menu/main nav is selected instead of the designated hot key and I need to hit esc twice to exit the main nav selection and go back to the tool I was using... “I did say this would be hard to explain”.
    Let me paint a specific scenario that causes this to happen:
    I want to create a mirror reflection for a product. I first duplicate the product image, then I flip it vertically and drag it to the bottom of the base image. Then I hit the directional up button to nudge it into place but this doesn’t work because by hitting the directional button ‘File’ from the main nav is selected. In order to return to the ‘move tool’ I need to hit esc twice or hit the mouse button once. This may not sound like a big deal and it’s not but do this 500 times a day for a week with the ‘polygonal lasso tool or PLT’ and tell me it’s not a big deal after that. When using the ‘PLT’ you have no option but to hit the esc button twice because if you click the mouse button you place an anchor for the PLT and chance loosing anything you have already preselected with the PLT.
    Anyway, moral of the story is... I have a mouse which is more than proficient in selecting File, Edit, Image, Type and any other main nav query. I would love the hot keys to select just the tools and simply leave the main nav out of it... when I first purchased CS5 this function was not apparent. It was only after an update or maybe I blindly changed a preference and poof... every second hot key I push I select something from the main nav which is a completely pointless and annoying function for me which I have never used and never ever will.
    Please Adobe tech masters, help me! I will be forever in your debt.
    Cheers,
    Tony

    Not a problem in the Adobe software. Something is wrong with your input devices or you have something on your system that instates global, system-wide shortcuts that may conflict with application specific ones. You need to figure out what it is.
    Mylenium

  • Outlook for Planning Applications

    At TechEd Berlin in Session EIM202 - Dr Gerd Schoeffl and Detlef Wassmuth presented some slides on Outlook which were not included in the pack. They promissed to publish these on SDN after TechEd but I cannot find them. Could you please let me know where they are?
    Thanks
    Mike

    While session is not present here:
    http://www.sdn.sap.com/irj/scn/vste-catalog?sdn_event_version=sdn_event_teched_version_10
    I would say that you need to contact those two guys in order to remind them.

  • Planning Applications

    Following the developers' guide on 'Business Planning and Analytical Services' for 2004S we got stuck on assigning custom Commands for Planning Applications in WAD, which were created in the planning wizard.
    The option for 'Commands for Planning Applications' does NOT show up in the command wizard!
    is there a ABAP/Java stack pre-requisite for this or is there a new(?) authorisation object missing?
    Does it helps for others? On which Java Stack

    Check OSS note 948336.

  • BPC 7.5 NW SP 06 Currency Translation - Planning Applications

    Hello Gurus,
    We have created a planning application for internal management reporting and want to enable the currency conversion business rules.  However, for planning applications, we do not need a FLOW type dimension.  But one of the parameters in the currency conversion business rules is the source FLOW.  Therefore, I am not sure if I still have to create a P_FLOW dimension and include it in the planning application, just to be able to perform the currency conversion activities.
    I am curious to know if anyone of you guys has come across a situation like this.  If so, could you please guide me?
    Thanks,
    Van.

    Hi Van,
    Flow is a required dimension for consolidation setup.
    Please check the below link:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/frameset.htm
    Thanks,
    Anil

  • Can not copy planning application in EAS?

    the copy option is blanked out for planning application, but fine with other applications.
    this is 11.1.2.3, not see this previous version.

    You can not copy planning application from EAS (Essbase part).. As the application registration is different for Planning and Essbase only applications. Thats why will not be able to register the planning application from EAS as well...
    If you really want to copy Planning application...
    Then LCM, Copyapp.bat/sh can help you ...You need to create new Planning application (Not just essbase part of Planning app).
    Cheers!
    Sh!va

Maybe you are looking for