Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Similar Messages

Remote Desktop stopped mid-session and can't reconnect

My remote desktop session suddenly ended, and I cannot reconnect. I restarted the virtual machine and the management portal says that it is running. The RDP endpoint is still configured.
I can ping the machine, but the port is not open. Tried deleting the RDP endpoint and adding it back, and it still is not open.

45m later the problem went away. There was some kind of technical outage on the server status page that may have been affecting it.

Remote desktop is it secure and encrypted for windows 7 and windows 2008 servers

Remote desktop is it secure and encrypted? any supporting documenting showing if it is secure and encrypted .

Hi,
Yes, RDP is secure and encrypted. RDP uses RSA Security's RC4 cipher, a stream cipher designed to efficiently encrypt small amounts of data. RC4 is designed for secure communications over
networks. Administrators can choose to encrypt data by using a 56- or 128-bit key.
For more details, you can refer to the following:
Standard RDP Security
http://msdn.microsoft.com/en-us/library/cc240771.aspx
Enhanced RDP Security
http://msdn.microsoft.com/en-us/library/cc240795.aspx
Secure RDS (Remote Desktop Services) Connections with SSL
http://technet.microsoft.com/en-us/magazine/ff458357.aspx
Configure Security Settings for Remote Desktop Services Connections
http://technet.microsoft.com/en-us/library/cc753488.aspx
Thanks.
Jeremy Wu
TechNet Community Support

HT201068 I updated Remote Desktop Admin 3.8 and now my Time Capsule wireless connection is having.

I recently updated to Remote Desktop Admin 3.8 and since then, I have had issues with the wireless connection from my Time Capsule.
1) I reset modem and had no change. 2) I then plugged the ethernet directly into my Mac and the connection was great so it's not the service or modem.
3) I hard reset the TC and when it came back, the speed was good but went back down after a few minutes. 4) Plugged ethernet directly into Mac and again, the speed was great so it is definitely the TC.
Would love some help resolving this. Hoping I don't have to get a new wireless router. Maybe the TC is too old? I purchased it in 2009 or 2010/ Current version 7.6.4

Hey evebutterflies,
I see that you are having some connection issues with your Time Capsule. Are these issues only present when using Remote Desktop Admin 3.8? If so, you may need to review the information in the following article and see if this sheds some light on the issue:
Apple Remote Desktop: Troubleshooting Connection to Client Behind NAT Router
http://support.apple.com/kb/TA20780
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

HT201068 Updated Remote Desktop Admin 3.8 and now my Time Capsule wireless connection is slow

I recently updated to Remote Desktop Admin 3.8 and since then, I have had issues with the wireless connection from my Time Capsule.
1) I reset modem and had no change. 2) I then plugged the ethernet directly into my Mac and the connection was great so it's not the service or modem.
3) I hard reset the TC and when it came back, the speed was good but went back down after a few minutes. 4) Plugged ethernet directly into Mac and again, the speed was great so it is definitely the TC.
Would love some help resolving this. Hoping I don't have to get a new wireless router. Maybe the TC is too old? I purchased it in 2009 or 2010/ Current version 7.6.4

Most home routers running 24/7 are good for about 3years.. your TC has now managed to survive 6 years.. it is well and truly time for a replacement. Simple fact is, it should be dead by now.. so you are living on borrowed time whatever happens.
Why RDA would slow the wireless I am not sure..
Are you running Yosemite.. ?? I tend to point the finger at the OS rather than an application.. mind you if the amount of data going back and forth has increased.. what appears to be slower wireless might actually be something else.
Apple has reasonable wireless analyser built into the OS since mountain lion.. it is well worth using.
http://osxdaily.com/2012/07/31/wi-fi-scanner-mac-os-x-mountain-lion/
I recommend doing a few things like short names, no spaces pure alphanumeric for everything in networks. Passwords also must comply. Apple made changes to network protocols since Mavericks but did not fix the names being recommended in the airport utility.. and still haven't which break their own rules.
And fix names for bands differently so you can force the connection.. plus setting channels.
However in a unit of that age.. it will have pretty weak 5ghz and that is what is important for high speed wireless.. Apple have hindered 2.4ghz since forever.

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Mac Version 8.0.12 (Build 25282) of Remote Desktop deletes all connection and gateway settings on startup

Hello,
I have a frustrating issue with MRD for Mac Version 8.0.12 (Build 25282). The application was interrupted while updating a few days ago and started throwing errors when I attempted to launch it. I deleted the app using Launchpad and reinstalled via the App
Store. Ever since the initial reinstall (and subsequent ones) the app will pop the "What's New?" version update window (even if I select the "Don't show this again" checkbox) and all of my saved settings are missing.
I would like to clear out all app data and try reinstalling but I can't find where MRD stores data on my system. Any suggestions on how to fix this problem would be much appreciated.
Thanks,
Eric C.

Hi Eric,
Thank you for posting in Windows Server Forum.
So from your description it seems that your remote desktop (MRD) is working fine but facing issue that can’t store the related setting (cache issue). So you can check whether you have any related logs from MAC MRD which give us any light for further research.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Or you can refer this link
for apple support or ask your question to apple support forum.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Remote desktop VM in Azure through VPN

I register my azure subscription in App Controller 2012 and I can now see the VM in Azure inside the portal.
I recently established a VPN connection from my side to Azure, with RRAS and everything is working properly (can ping machine from each
side and the other).
In the App Controller interface, with the button Remote Desktop I can connect to the VM in Azure through the other gateway (Virtual Public
IP) with correct endpoints configuration.
My question is: Is it possible to get the Remote Desktop button working as it would for VM in VMM register in App Controller, by avoiding
the Virtual Public IP and Endpoints and using directly the REAL ip?
Thanks,

Within App Controller the RDP connection uses the public IP of the virtual machine. There is not a configuration option to use an alternative IP.
Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Remote Desktop Client for Mac and SSO

Hi.
We have RDS Deployment (Windows Server 2012 R2) with RD Connection Brokers, RD Session Hosts and Web Access.
Windows clients log on without any issues, credentials must be entered only once (Single Sign On).
But Mac clients must enter their credentials twice (on CB and SH).
Does Remote Desktop Client for Mac support SSO and if it does, what special settings are required?
Mac users use Microsoft Remote Desktop 8.0.13.

Sorry, I have missed important detail. This problem appears when I open .rdp files.
Really, if I create connection and save my credentials, I will not enter credentials. But in this case I can't specify Collection
(loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.SomeCollection - parameter in .rpd file).
In my case, I open .rdp file, connect to RD Connection Broker, log in to RD CB, RD CB redirects me to RD
Session Host, I log in to RD SH (enter credential second time) and now I connect. In this chain could be a RD Gateway.
When I connect to the same farm with the same .rdp file from Windows client, I have enter credential only once (SSO works).
So my question: Does Remote
Desktop Client for Mac support SSO? I know that SSO require CredSSP, is it implemented in Client for Mac?

Problem with Remote Desktop on iPad 2 and windows 8.1 pro

I downloaded the Microsoft Remote Desktop app from the App Store on my iPad 2. I typed in the IP address for my windows 8.1 pro computer on my iPad 2 in school to try connecting to my windows 8.1 pro computer at home. I'm having
a hard time doing it. Do I need a rd remote gateway to access my computer from outside my local network. If so, how do I find my gateway server name? Also, I saw somewhere that I have to press accept in a pop up message on the computer your trying to connect
to. Is this true? No one is home during the day and my iPad 2 has to stay in school. Can you please give me a step by step guide with photos to help me connect to my windows 8.1 pro computer from my iPad 2 from school, which is of course outside my local network.

Hi,
Please refer to the document below for the procedure to use Microsoft Remote Desktop APP of IOS APP store.
Getting Started with Remote Desktop Client on iOS:
http://technet.microsoft.com/en-us/library/dn473013.aspx
Roger Lu
TechNet Community Support

Remote desktop 8.0.14 (and prior) full screen RDweb session, screen pushed down by Mac Menu bar, mouse pointer on wrong position

Hi
On Mac OS X 10.10 Yosemite, there is a clear bug on the Microsoft Remote desktop app when
a) remoting into a Windows server that is set to display full screen
b) when you are logging in using a RDweb server aka RDS 2012.
After logging in to the remote server, the full screen representation of the server desktop has the following issues:
- The Mac Launchpad is still visible over the Windows desktop, making that part of the Windows desktop impossible to reach.
- The published screen is pushed down about 15 pixels. It is pushed down by the Mac's menu that also remains visible.
When I directly remote into the same server using traditional direct RDP (Not via the RDweb, gateway setup) the screen positions correctly.
I guess: Somehow the Remote desktop app (8.0.14) does not seem to get the message from the server that this is a full screen session? Is there some information that the connection Broker or Gateway is not passing allong to
the client?
I have replicated this many times. It is the same whether I connect to a 2012 server or to a 2008 server.
Bart

Hi,
For a try you can use URI scheme for the specified desktop screen or full screen and check the result. You can refer the following article for information.
Remote Desktop Client URI Scheme Support
https://technet.microsoft.com/en-us/library/dn690096.aspx
Apart if you have RD Gateway setup then you can try the option for RD Gateway to uncheck “Bypass RD Gateway for Local address” and verify result.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Apple Remote Desktop - Users constantly appear and disappear in All Computers List

I have a problem and I am thinking it is probably some kind of broadcast error on my network, but why not question Apple Remote Desktop in the process? Computers seem to flicker from available to unavailable. I think they are actually on. If I send a task out while it shows availbe it does complete even though it flickers on and off throughout the package install. However it will not let me send out installs when it say unavailable (as expected). If I am lucky I can catch the systems when they show available and the installs work. I have deleted preferences and re-installed ARD. I am using 3.7
Personally I think it is my switches and Bonjour. Does anyone else have this issue and a work around?

Hey Madoser,
I had the same problem. I administrate around 30 macs, which I undrestand isn't much.....I was having issues with ard after updating to mavericks. I decided to do a complete erase and reinstall on my machine. This was't because of ard, mind you. I was having all kinds of problems. Nothing unexpected as far as I'm concerned but after doing things, my ard problems went away. It's only been a day, but everything is working like a dream.
I'll make sure

NEW findings on the MS Remote Desktop issues for iOS and MacOS, please read Microsoft

Hi there,
Yesterday morning, I posted this topic: http://tinyurl.com/kohtjnm
Since then, new findings has brought some light on the issue. As stated in that last topic, I work for a software company that uses RDP as a clouding solution. Our customers using iPads were no longer able to connect since September while users with Windows
and Android were working fine. We figured that MacOS users didn't have problems either until one of them called us yesterday.
On tablets, we assist the customer to configure a single connection since it's usually not their main methods of working, but on MacOS, we configure 2 connections, two different domain names leading to the same server, this is in case one of the domain provider
is down like it happened in the past. The first domain is with Network Solutions while the 2nd domain is with GoDaddy.com Canada. With the MacOS user who called us yesterday, we found out that the 1st address (Network Solutions) didn't work but the 2nd address
(GoDaddy) did work. At first, we thought that the problem was with her Mac since no other Mac customer called us. Later that day, we had a new customer with a Mac and after setting him up, I had the same issue, the Network Solution address didn't work either.
After I was done with the Mac customer, I quickly grabbed our iPad and set-up MS Remote Desktop with our 2nd domain address (GoDaddy) and it worked!!! The problem is that somehow, your
latest program update is no longer compatible with every domain name address, it has nothing to do with gateways since both domain names have a gateway address from the respective provider.
So to recap, everything is cool with Windows and Android, the problem is the version 8 of your program for Apple products, it's not compatible with every domain name, something's jamming the connections, it's up to you to figure out what.
Thank you

Hi,
Thanks for your feedback, I will forward your concern to the product group.
Regards.
Dharmesh Solanki
TechNet Community Support

Bug report: Under Remote Desktop Connection, local units and resources menu has OK button missing

I've noticed that the "Local units and resources" in Remote Desktop Connection is missing an OK button. It seems to be a localization issue because I changed my Windows profile language to English, logged out and back in again, started RDC and
the Ok and Cancel button became visible. Changed my language back to Norwegian again and the buttons are gone again.
I have also confirmed this by testing the same on a clean new installation.
Temporary Work-around: Select an option, press tab-key once (it will select the OK button which you cannot see), then press Enter.

Hi,
Based on my test,I got the same result.
Thanks for your feedback.
We will submit this issue to Microsoft product team.
Regards,
Kelvin Xu
TechNet Community Support

Remote Desktop 3.5.1 and Disk Permissions

I know these are probably safe to ignore, but after installing Remote Desktop Client Update 3.5.1 on Mac OS 10.6.8, it generates a lot of repair permission lines that upon restart, revert. I have read Apple's list of safely ignored messages, but I am guessing that will get updated since this update just came out today. Have installed on multiple Macs and see the same thing.. Just surprised how one update can change so many on a "normal" basis.

This was mine...
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b", should be drwxr-xr-x , they are -rwxr-xr-x . Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x . Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Similar Messages

Maybe you are looking for